Monitoring and recording problem with midi vs audio firewire

I'm trying to record my Roland synth via Inspire firewire box into Logic express. I'm able to record and monitor thru the output of the inspire box. However If I'm using firewire, I can't hear other midi file tracks and vice versa. I keep switching input and output sources in the control settings but it seems like I either have to use all midi tracks or all audio tracks. Same situation with playback. I know this is wrong but am totally stumped. Any advice would by awesome.

Dave, You might need an external DAW to do this, I got it working and I'm an idiot. There is only one I/O for logic and if you use it for the audio recording it's not available for the sounds you want to have coming out of logic. I have Roland Edirol UA-25USB2 and it works like a charm, If I understand what I did correctly, the sound and MIDI messages are routed via an Aggregate Device in the audio/MIDI set-up [you configure the device in the audio half] to the Edirol, and there are many extra functions to choose from-I avoid the 3.5mm audio out headphone plug by routing audio out through the DAW Edirol-much better sound quality than the mini stereo jack.

Similar Messages

How do I monitor and record a MIDI instrument on Garageband?

I may be missing something simple in Garageband setup. I want to monitor and record a drumkit via its MIDI output. It is a Yamaha DTXplorer so I have Subtlesoft Midipipe installed and a Focusrite Saffire 6 USB converter. Microphones and guitars are being monitored and recorded with without problem. When I connect the Focusrite to my Macbook air and drumkit the MIDI indicators are blank, no MIDI input detected by Garageband. Then I close GB and launch Midipipe, the MIDI input detected light on the Focusrite illuminates and GB detects one MIDI input (Saffire 6) in preferences window. But if I select new track/software instrument Saffire 6 input is grayed out and so cannot be selected (if I select the mic or guitar sources it is bold and can be selected). If I go ahead and create the software instrument there is no monitor button and nothing is heard or recorded.

What is the best way to uninstall and reinstall the Focusrite MIDI interface driver. And to uninstall and reinstall the Subtlesoft Midipipe (which is required to get the correct mapping for a Yamaha drumkit)? This was done for me at the Apple Store One On One session in a prior attempt to fix this problem but obviously it did not work. I'd like to try it one more time with the drumkit connected. I did see a screen at one point which allowed me to select the inputs from the Focusrite but I could never find it again. I don't think it was a Garageband menu but somewhere else, maybe during the driver or software install for the Focusrite. I would love to get back to that screen again and take a hard look at it.

How to fix problem "PYLR2000 error playing a file. Try again or contact your Monitoring and Recording administrator"

Hi,
I'm using qm 8.5.2 (endpoint recording) most of customer PCs cannot play recording file in application.
When I launch application and try to play recoding file, it is stuck and show error message "PYLR2000 error playing a file. Try again or contact your Monitoring and Recording administrator." I've install all cilent requirements (validate pc is pass). The error still occur. Even though all requirements are complete .
So, How to fix this problem.
Thank in advance
Namkhao

Hi bsetexast,
I'm fix this problem by using Java(TM) version 6.0.200.2 that can be download from UCCX when first run CSD (supervisor desktop). Even other higher java version is valid but this problem still occur. If you install higher version, you should uninstall it first and install this version as well.
If you cannot find them, I will send you via email.

Use two streams to manager client video/audio,Can i combine streams and record it with server AS API

Use two streams to manager client video/audio,Can i combine streams and record it with server AS API
I tried Stream.play()
var s=Stream.get("combine");
s.play("video");
s.play("audio",null,null,false);
s.record("append");
it's don't work!!

Thanks, that's what I had thought. Our domain.com zone is sourced internally and replicated to our advertisers for external users, so there's no way to change the result for internal vs external users.
This is a rudimentary question that I should already know but I sort of inherited this after it was built: Can I have users sign in with their email address ([email protected]) but under the hood, their SIP address is [email protected]? This would let users
sign in with an address they expect, but it would take advantage of the the local lyncdiscoverinternal record.
Thanks,
Matt

My sound is like echo and i can't solve the problem with realtek hd audio manager

HP G72 notebook
Windows 7 64 bit
Sound is like echo and can't solve problem with Realtek HD audio manager

It's a Qosmio X300-16M (windows 7 64bit)
I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
And I just want to know if it's a curent problem or not... and if someone can fix it

Having problem with midi?

I am having problem with midi keyboard (korg pa80) I having hard time to midi to logic every time I have to either restart the logic or restart the keyboard or plug out the USB cable and put back in order to work. Plus when I created a new track doen't work with it. I have to do same as above to make it work? help please how can i refresh the midi connection with going throw steps above?

Is it the computer dropping the MIDI interface, or the computer connectin is fine adn Logic is not seeing it?
Run the Audio/MIDI Setup utility and make sure your MIDI device is present. If not, try another USB port, or don't use a hub.
Assuming the connection is solid, in Logic, option-click on File -> New and try it - if it works in that song, but not your own songs, it's a song specific issue, so check your MIDI input handling in the environment.

Live Monitoring and Recording for VPN Remote CAD Agents in UCCX

Dear all,
We have deployed UCCX 5.0(2) for one of our customers.
Silent Monitoring and Recording are working fine for local agents.
We have deployed new Remote agents using IP Communicator and Cisco VPN on their PC. Everything is working fine but could not monitor or record them.
We have made site-to-site VPN using a PIX and give these agents Hard Phones 7942. Everything is working fine but could not monitor or record them.
We also installed WFO QM client on their PCs in order to record calls but no way !
Is there any way that we can use in order to make these agents silently monitored and recorded?
Thanks for all.

good afternoon,
I am not a senior guy but we experienced the same issues with monitoring users at home on VPN. After some trouble shooting I found that most users are on wireless and when I had them plug in with a cable we could hear their calls and record fine with no issues. Though, the agents preferred to be on wireless, of course! the senior engineer did mention something about changing the Codec and utilizing some DSP resources.
MM

CUCCX 8.0 - Call monitoring and recording

Hello,
I've worked with desktop-side monitoring and recording on various versions fo CUCCX in the past and have come to the point where this particular solution is not practicle anymore (we would need cordinate with the desktop group to install Cisco-approved NICs, and yes I am aware that there is a workaround but it doesn't work on NICs that do not support promiscuous mode.)
CUCCX supports a server-side method as well, but I have no experience in it and would like to find a how-to document. Would it work in a mixed network environment? Any pointers would be helpful.

Hi
In my experience the 'lack of support for promiscuous mode' NICs is vastly overstated. I've not come accross a single NIC that doesn't work. I suspect that document was written back when NICs were based on valves or something.
Typically the main issues are simple config errors - not doing span-to-pc-port, not daisy chaining PCs, etc.(And on v8.0+ it's usually due to the services falling over, which will ruin things for you whether you use CAD or server-side monitoring!)
RE: server side monitoring - I've worked on some fairly large SPAN based deployments. UCCX is pretty agnostic, you just need to make sure it sees each conversation (and sees each one only once!) using whatever SPAN config you can. It's more a question of how handy you are with networking than anything specific to UCCX.
Regards
Aaron

Monitoring and recording feature not working in UCCX

Hi,
The recording and monitoring option is not working in the new UCCX setup I have installed.I have configured following things for desktop monitoring as per the document
1)Checked that IP Phones are diasy chained and speakers of Supervisor's PC is working,NIC card of agent's and supervisor desktops are compatible
2)In web CDA P phones to be monitored have been configured
3)In CCM configured the phone for "Span to PC port" as enabled also configured "Advertise G.722 codec" as disabled
4)Ran postinstall.exe on agents system and checked if correct NIC adapter is being used for monitoring
5)Checked the NIC binding order in UCCX server and that is correct
I noticed one thing that "services" in both CAD and CSD are showing as "partial services" and they are monitoring and recording services only.Hence is this problem related to these services? How do i correct the recording and monitoring issue?
Regards
Amit

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
I would first recycle the VOIP Monitoring Service on both node if this is HA. This will not affect calls or call processing.
In addition, you stated you ran post install on the clients desktop but have you ran post install on the server itself?
In the desktop Administrator, what server is selected to be the default VOIP Monitor server?
Jason M. Hutchinson

Mail and iPhoto Problems with sending photos.

Mail and iPhoto Problems with sending photos.
I have this problem that started a while ago and seems to be getting worse.
Here are the different scenarios.
-If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
-If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
-If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
-If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
-If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message I get a message it can't be opened because it is empty.
-If I drag that same image to the mail message body the same thing happens.
-If I send that email to someone they cannot open the image file.
What I can do:
- I can drag that same image file on the desktop to my dropbox folder and it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
-I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
-I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message. I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
I can send that message to someone and they can see the photo and open it fine.
-If I send that same email to me I can see the photo within the mail. If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
I am stumped, all and any help is appreciated.

Another problem that may be related….
I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message "Files cannot be created in the selected location. You do not have permission to write to the selected location. Please choose a different location." I have found that i can only save the file to the clipboard. I have repaired permissions many times and still I have this problem.

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I have Iphoon 4 and ihave problem with speaker what i have to do?

I have Iphoon 4 and ihave problem with speaker what i have to do?My problem is no body can heir me.
I have got my IPhoon from London U.K. Now i'm in Saudia Arabia

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I have ipad 2 and facing problem with programs swtching off

I have ipad 2 and facing problem with programs it's swtching off while working and turn to home page. Am using ios 5

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I have an iMac OS X 10.6.8 and have problems with the backup Disk for Time Machine disconnecting itself with the message that I ejected it improperly.. It ejected itself - why?

I have an iMac OS X 10.6.8 and have problems with the backup drive to Time Machine ejecting itself and so does not automatically backup the way it is meant to do. It is connected with an USB cable to my iMac. What could cause this - malfuntioning drive?

The "iLife" apps are not part of any Mac operating system install and are a separate purchase.
Once you get past 10.6.6 you can purchase and download iPhoto, GarageBand and iMovie. iWeb and iDVD have been discontinued.
Snow Leopard 10.6.6 and higher include the App Store application which is what you use to purchase Lion.

Just purchased Wndows Vista and having problems with the port for Palm 125

I just purchased a Windows Vista computer and having problems with getting my Palm 125 to sync with the desktop. I get an error message saying: "Com1 not available" What do I do?
Thanks,
Frustrated
Post relates to: Palm m125
This question was solved.
View Solution.

Sorry, that didn't work. I get no drop down menu from the Hot Sync Manager for the Serial Port. What comes up often is: "The selected port, COM1, is not available at this time. Hot Sync Manager will open the port when it becomes available."
Could it be the Norton Antivirus Firewall that is preventing the Hot Sync Manager to open the Serial Port? Just a thought. Thanks for your help.
Post relates to: Palm m125

Monitoring and recording problem with midi vs audio firewire

Similar Messages

Maybe you are looking for