Monitoring and staistics tool

Hi ,
can anyone recommend of a good tool to use for monitoring and statistics of oracle ?
10x

I do agree OEM is good one.
And, we may have other alternatives as following.
DBArtisan from Embarcadero Technologies,
DBHwak (formerly DBACOnnect) from Datasparc
For checking statistics, you can try (based on Statspack):
1. JOraStat (Freeware) )http://www.oraclepoint.com/topic.php?filename=56&extra=page%3D1
2. spViewer http://www.oraclepoint.com/topic.php?filename=62&extra=page%3D1
3. SEER (Freeware) http://www.oraclepoint.com/topic.php?filename=132&extra=page%3D1
Also, recommend here a Database Health Check script from Metalink. FYI.
http://www.oraclepoint.com/topic.php?filename=103&extra=page%3D1
Message was edited by:
R.Wang

Similar Messages

VoIP Monitoring and Management Tools

Does anyone have suggestion on VoIP monitoring and management tools for large enterprise voip infrastructure?
We are in the final phase of 8000 phone cut-over across 2 location (2clusters) and need some advice on choosing the right monitoring system.
I saw Qovia have Cisco approved monitoring tools.
Does anyone ever use this? any suggestions or advice?
Thanks in advance
Bonaldi Kresnanto

Bonaldi,
Monitoring voice quality is just one aspect of ongoing operations. It is equally (if not more) important to have the ability to remotely troubleshoot end-user problems, manage configuration changes, and perform active testing on a regular basis before users are impacted.
In addition, whenever you make changes to your IPT system (e.g. CallManager upgrades/patches, IOS upgrades, power outages) you'll definitely want the ability to verify the system is still operating as design. Using the active tests you can do this easily and in an automated fashion.
ClarusIPC Operations is the only product that addresses these needs. It is also just as valuable during the deployment as ongoing operations to help you make changes and deploy new phones with the same product you day-to-day.
I'd like to talk to you more about the product and how it can be used in your environment.
David Roberts
[email protected]

Monitoring and Alerting tools for Business Object Data Integrator

Hi,
We have Business Objects DI installed in AIX 5.3 environment. Please advise any type of monitoring and alerting tools for DI.
Monitor tools to monitor Job servers(like job service and web services running properly) and also to monitor long running extraction jobs and alerting the same. Thanks.
Thanks.
Raj.

Hi Thomas
Though both the tools objectives are for Data integration, the purpose for both tools are different.
SAP BODS/ BOBJ Data Integrator is an ETL tool which involves combining data residing in different sources and providing users with a unified view of the data
SAP PI is a Middleware/EAI tool which have a mechanism/technology that connects different parts of an application or a series of applications
SAP BOBJ Data Integrator
Bulk Data Integration
Extraction Transformation and Loading
Deals of huge volume of data
SAP PI
It is process based integration of application data
It is a middle ware which integrates various project applications into a common programming package that can be operate/access as a single application
SAP NetWeaver PI is SAP’s implementation of Service-oriented Architecture (SOA) middleware and facilitates the integration of business processes that span different departments, organizations, or companies.
SAP PI uses SAP NetWeaver Application Server and message servers where in fail over cases the messages can be resent again.
The below differences will gives you more clarity
Verdict is we can use both the tools for data transfer/migration and for choosing the tool depends upon the business requirement
Please reply back if you need more information.
Regards
Murthy

Looking for feedback for new monitoring and notification tool

Hi we just released our cross platform Cluster and Systems Management tool for OS X. It runs natively and can generate reports and send notifications on many different services and system data.
Please check it out. It should make any sysadmins life a lot easier: http://www.bixdata.com/

Hi Dore,
According to your description, I understand that you want to set Integrated Windows authentication(IWA) for internal client access, Forms-based authentication(FBA) for external client.
If I misunderstand your concern, please do not hesitate to let me know.
As you mentioned, we can create another virtual directory and configure different authentication with different website. More details about
Configuring Multiple OWA/ECP Virtual Directories on Exchange 2010 Client Access Server, please refer to:
http://blogs.technet.com/b/exchange/archive/2011/01/17/configuring-multiple-owa-ecp-virtual-directories-on-exchange-2010-client-access-server.aspx
“Microsoft strongly recommends OWA and ECP virtual directories in the Default Web Site be configured for IWA, leaving the InternalURL as with the default (Server FQDN), making that site and virtual directory the target of proxy requests from other Active
Directory sites or delegated connections from the firewall.
Microsoft recommends creating the second OWA/ECP virtual directories in a new IIS web site with a different IP address, and using it for internal client access. By default the new virtual directories will be FBA-enabled, and have no internal or external
URL values.”
Best Regards,
Allen Wang

Performance Monitoring and Profiling

Hi,
I am looking for an Opensource or freeware Performance monitoring and profiling tool. Right now we are using Java melody but it is just a monitoring
tool where it doesnot give much information on the memory leaks, etc. I need to a tool which captures the memory leaks and GC operations in detail.
Please suggest one.
Thanks

rajeev_b wrote:
You can try Java Monitor eclipse plugin. This gives detailed performance analysis on JVM level.
More information at http://www.jvmmonitor.org/
This is opensource plugin.Neat! Thanks for the link.

Tools for monitoring and Statistic.

Hi there
I am looking for a tool that help me to monitoring and take some statistic from ASA 5500 series, for example:
monitor the number of connections in use
monitor the number of tunnels in use
monitor the number of sessions in use
monitor throughput, packets and errors on all interfaces of the Cisco ASA
monitor encrypted traffic throughput
monitor your firewall’s uptime
monitor statistics for TCP and UD
Looking at on the internet I found this tool LogicMonitor somebody knows if this tool is good and reliable???
Thanks everybody

Hi,
You didn't mention if you're looking for a free or licensed tool.
We use ManageEngine/OpManager as our main monitoring and reporting (NetFlow) tool for our ASAs.
Sent from Cisco Technical Support iPhone App

Any tool to monitor and Troubleshoot existing Voice setup

Dear All,
Please any one assist on below given points
Existing setup facing performance and conference issue :
1> All of sudden I am facing the problem with conference calls between inter site as well as intra site, Is there any tool to troubleshoot the same?
2> Is there any tool to monitor and maintain the Voice setup?
3> Is there any tool to troubleshoot the every single problems in voice setup(CUCM / Unity connection)?
Every post would be highly appreciate.
Thank's
AT

Cisco has Unified Operations Manager. It has good monitoring capabilities and and some troubleshooting capabilities.
Check out the link below.
http://www.cisco.com/en/US/products/ps6535/index.html
HTH
Sent from Cisco Technical Support iPhone App

If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.

Question
If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.
Screen 2/3 blanco on the left side
With F11 all OK.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

File Server Resource Manager will not load WMI Objects on Windows 8.0/8.1 Preview with Hyper-V and Server Tools Loaded

Hi Folks,
I have a problem getting "File Server Resource Manager" to start properly because WMI objects are not loading??? I don't understand this at all because I am able to access them with other Apps, etc. I have been over my Services list as well but
have not yet discovered which Service turns on/off "File Server Resource Manager". I have looked in Windows\System32\ and I can not find SrmSvc. I found other Srm's there though. I also found the FSRM Snapin which generates the Figure below but I
can not find it in the WMI Browser. I believe the Firewall is OKAY since I have been over that thoroughly. I do have the Server Tools Installed for Windows 8.0 or Windows 8.1 Clients as well as the Windows Updates applied, which is where I got "File Server
Resource Manager" in the first place. I have had WMI and Powershell 3.0 Package, installed since Windows 7 but I run a repair on them anyway.
I have read through "File Server Resource Manager could not load WMI objects on Windows Server 2012
Article ID: 2831687" but since I don't seem to have SrmSvc the solution doesn't help me. I haven't been able to find a similar one for the Windows Client.
If there is anything you could share on this problem I would be much obliged.
Thanks again,
Crysta
PhotM Phantom of the Mobile

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Photoshop CS4 64 bit - Clone Tool does not work (and other tools)

Hello.
I have been using Photoshop for many years going back to v5. I had used Design Prem Suite CS4 for the past year on an XP machine. All worked fine. I recently moved to WIndows 7 (64 bit) to get the add memory usage. CS4 installs both 64 and 32 bit versions on Windows 7 64 bit. So far all good. Any help would be GREATLY APPRECIATED. I am at a dead end and really have no confidence in getting Adobe's help.
My tools are working erratically, especially the cloning and healing tools. I can't even use Photoshop in its current state and this has been going on now for weeks, no help from Adobe on my lates support ticket post.
I canonly say that the clong tools is all over the place including but not limited to:
* When I sample and then click to stamp, lines shoot across across the image as it I clone a line not a single sample area. These stamps can be the length of the enite image.
* when I sample, then click to stamp, some the stamps occurs on some other part of the image.
* when I sample and the click to stamp, nothing happens. I have to click several times.
* when I sample and then click to stampl, the prior location I stamped has the clone applied
There are more, but this is to just give an example.
Notes:
* I have trashed preferences at least 20 times and the problem immediately reappears
* The problem happens in both the 32 bit and 64 bit version of PS running in Windows 7 65 bit
* The problem occurs with OpenGL tuned on and off
* I have installed the latest PC patch 11.0.1
* I have updated my latest NVidia drives. They are current.
* I uninstalled Photoshop (kept the rest of Suite) and that did not work, and the same problem reappeared. I am not uninstalling the complete suite but the reinstall has error (that is a separate issue)
* I have triple monitors running off 2 GeForce 9800 GT cards. These worked flawlessly before upgrading to the Windows 7 64 bit configuration. When I upgrades, I replaced the processor, motherbaord and moved to 12 GB ram. The graphic cards are the same.
Other tool issues:
* I have similar problems with the healing brush
* sometomes the text tool acts strange. I will click to enter text and a large area opens to enter text instead of just the cursor positioned ready for text. Then other times it works normally.
* the move tools sometimesacts strange. For example, if I try to move some test, the text jumps and moves of the image and I have to find it to drag it back on the image.
Thanks in advance

All I can say is... Boy am I glad I have an ATI card that just works (and that's including Photoshop CS4/CS5 32/64 bit)!
One thing I'm not sure was mentioned above... Try changing your Advanced OpenGL preferences to "Basic" or even turning off OpenGL to see if it affects the issue. Also try disabling the Show Overlay function in the CLONE SOURCE palette.
Best of luck getting to the bottom of these problems, guys. If they run on too long, consider switching brands.
-Noel

Editing with Mac Monitor and TV.

When I try to view a TV and monitor simultaneously for editing I do not always get a picture on the TV. Sometimes sound only. I use a Panasonic GS 400 connected between monitor and TV. In preferences I have set iMovie to playback through camera.
It appears if I am viewing clips in the Clip Viewer and stay in that mode, even when moving the curser the pictures are OK. If I now click on a clip in the Clips Pane the picture on the TV disappears.
To get it back if I click on preferences>playback icon and then come out of preferences the TV picture returns.
As a matter of interest I have tried different connecting cables and a Canon camcorder with no change.
Is their anyone that can Help Please!

Hi
Recognice this wagely.
Using two ways to connect to TV (one at a time)
• Canopus ADVC 300
• Sony TRV 900E
The Sony Camera keeps contact all the time but my Mac dislikes it when starting-up
(has to be de-connected)
The Canopus drops contact from time to time - toggling the Analog or Digital input switch
most often re-connects.
Not sure if there is a fix for this but You might try:
*Not knowing the origin to Your problem - General approach when in trouble is as follows*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08)
• Program miss-match: iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match: iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Screen must be set to Million-colors
iMovie pref file resides:
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named: com.apple.iMovie.plist
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
From LKN 1935: (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Yours Bengt W

Slip and slide tools don't display the four reference frames

According to the help page, "when you use the Slip or Slide tool, the Program Monitor displays the four frames involved in the edit side by side, except when editing audio only". On my machine, when I use the slip or slide tool, the program monitor continues to display the same clip; it does not divide itself up into the handy four reference frames at all. The tool still seems to work, doing its thing on the timeline, but it's useless without the four frames.
Anyone have any idea how I screwed this up, I have searched everywhere in the preferences etc, and also here and on google, but can't for the life of me figure out why it is doing this to me.
In the image below, I have the slide tool activated, and am dragging a clip, but the monitor window on the top right remains stubbornly singular.

Well I solved it myself. I will note it here so others in the same situation will find the solution.
I had installed the MainConcept Mpeg Pro plugin suite (v.5) soon after installing Premiere; Mainconcept apparently (and inexplicably) does not support this feature in the playback/monitor window. Which renders these tools useless when the Mainconcept playback is active. Very strange omission on Mainconcept's part.
To fix it go to:
Project>Project Settings>General
At the bottom of the window that pops up is a drop-down menu entitled "Video Rendering and Playback"; mine was set to playback with the Mainconcept Renderer; I switched it to Mercury Engine Playback and now the reference frames pop up as they should with Slip, Slide and other tools.
Problem solved!

CS2 Eye dropper and clone tool not picking up correct colour from image.

Hello everyone, Can anyone help me please. I have an iMac with 0SX 10.4.4.
Plenty of Ram and hard drive space. In using CS2 the eyedropper and clone tools will not pick up the exact same colour from the image that I require. It is always lighter in shade and has on occasion been white. Any help in solving this problem will be much appreciated.
Yours in anticipation, Geoff Walter.

>The eyedropper is picking-up the color as rendered in RGB on your Monitor...
Really? Not from the pixels in the file? So the same pixels are reported with different values depending on monitor setup? This is about how the eyedropper reports pixel values, not about how they are rendered to the screen, is that correct?
Just to be sure here, this is so even with the eyedropper set to point sample?
Al
Edit: Or do you mean that this is a known problem with 0SX 10.4.4. and Photoshop, in which the values are picked up from the monitor and not from the file data?

Assistance needed with new monitor and printing from LR3

I just purchased a new IPS monitor. I have calibrated it using the HP Display assistant that came with it. It is an HP ZR 22w. I saved my calibration as a preset - however - this is not appearing as a profile when I try to select it in the print module. the checkbox for "include display profiles" is ticked. If I allow the printer to manage - the pictures are much warmer than on the IPS display. My printer is a canon mg6120 and I am running windows 7. I would appreciate any assistance that anyone can provide. Thank you

I think the "HP Display assistant" is a software tool, is that right?
Ideally with Lightroom, you should use a hardware calibration/profiling tool (Spyder, Eye One, Color Munki etc). In particular, you need a monitor profile that contains colour space information. I had a look through the HP Display Assistant user manual, and it appears the software does calibration but it probably doesn't put colour space info in the profile. It'll be better than nothing, but a hardware tool is better.
However:
I saved my calibration as a preset - however - this is not appearing as a profile when I try to select it in the print module. the checkbox for "include display profiles" is ticked. If I allow the printer to manage - the pictures are much warmer than on the IPS display. My printer is a canon mg6120 and I am running windows 7
This is not what you want to do! The profile that the HP Display Assistant creates is for the monitor, and only for the monitor. It gets the right white point and tone curve for the monitor. What you need in the profile drop-down in LR print module is a printer profile, not a monitor profile (except on very special circumstances).
I'm not familiar with the MG6120, but when I googled "profiles for canon mg6120" I got a lot of hits, so I assume profiles are available. It's quite likely that some came with the printer driver, and were installed with the printer software. When you select "profile" in LR print module (you may well have to go to "Other..." to see them all) then there should be profiles for the printer - possible lots of them - one or more for each paper type. If they're not there, see the Canon documentation (or google it) to find out how to load them.
If you can't find any profiles for the printer, then try using sRGB (or probably it's "sRGB IEC..."). Without colour management, your printer will probably expect sRGB images, so this should be roughly right, but a specific profile for the printer is better. This is one of those very special circumstances when something other than a printer profile (and sRGB isn't a printer profile) may be better than nothing.

Lightroom libary and development tool shows different colors

My problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.
When I switch between libary and development tool sometimes, the development tool shows then the same colors.
Alfred

Is your monitor profiled and calibrated, with a hardware tool (e.g. Spyder, Colourmunki etc)?
If there's no profile, or it's faulty, there can be problems. In Develop module LR uses ProPhoto RGB colour space, but in Library module it uses Adobe RGB. They'll look different if colour management isn't working, which requires a monitor profile that contains colour space information.

Monitoring and staistics tool

Similar Messages

Maybe you are looking for