Monitoring apps

Is there a monitoring app for the Iphone4 and Ipad?  Looking to monitor: texts, pictures, social media.

You can check the App Store, there are some parenting apps, but I don't think you will find one that allows you to see SMS content. They can delete SMS and you would not be able to recover them.
Some carriers provide some parenting applications with restrictions, but they usually cost money. Not sure they would even give you what you want. You may also want to look at the iPhone User Guide. It will provide you with information about the Restrictions section in Settings.
You can also ask them to show you their device for you to look at website history, but if there is that much distrust that you are going to be searching and/or monitoring the device, I'm afraid they will only take the time to delete this information from you.

Similar Messages

  • For the average person what really is the point of the activity monitor app when all you really want to know is whether your mac is running at its best?

    I have had my imac for nearly 18 months now,
    It's okay, is the best I can say about it.
    It cost me around £800+
    So recently (and foolishly!) I downloaded OS Mavericks when I was actually looking for a freebie word processor programme (I got Bean because it's simple like me.)
    Now the point of all this is that Mavericks has new features like a redesigned Safari (But I ain't noticed any difference yet) and Imaps (Huh!) and Ibooks and Imovie or something.
    So when you are oldish like me, you really don't want people to keep changing and introducing new stuff (most of which is pointless anyway) all the time; because it takes us old ***** a while to get used to the last "improvement."
    So you try and get rid of all these new apps that you don't want and didn't ask for anyway,
    and then you find out you can't, because they're an integral part of the new OS.
    Brilliant!
    Then you find that Mail has to redo itself and this thing no longer works properly etc. and you start wishing you hadn't got up that morning...
    So you try and get it all back the way it was..
    And you can't.
    Because you don't have an external hard drive to use the Time machine back up facility.
    So you get in touch with Apple Support and it's now nearly bedtime, but at least you feel like you might be gettin' somewhere.
    You talk to the supportguy and suddenly you can't remember what the problem is and what your name is, and you're thinking you might as well order in a pizza seein' as you've drunk the last of the gin..."
    Anyway the guy manages to keep his temper and you get some degree of order restored but the machine still seems "jumpy" so someone says to you
    "Check out the Activity Monitor! That'll tell you if something's not working right."
    So you do, but it doesn't.
    Just a bunch of numbers and CPU stuff and User Idiot Input etc.
    All you really want is some little box to pop up and say,
    "Hey! yyyou've really ssscrewed things upppp-p here, old mmmmman!!. This programme is no longer functioning properly, that thing appears to frozen, and you just wiped half your saved photos of Aunt Jessie's 94th birthday celebration (the one's where she had her eyes open)..
    Press here for a full maintenance overview and repair menu.."
    By this time you are on the floor, your leg's got cramp and you really really need a pee.
    But there ain't no maintenance programme, just an activity monitor app you can't make any sense out of, so you yank the **** power cord out of the socket and go to bed..
    So you try and

    DVD-R media that is single layer has 4.3 GB formatted capacity.
    DVD+R DL media has 7.8 GB formatted capacity.
    DVD-R double sided has 4.3 GB on each side.
    Message was edited by: a brody

  • My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for? Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?

    My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for?
    Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?
    I do not have any VPN enabled?

    Do you happen to have an Android?  If so and depending on what version there is a great data usage analyse tool built-in.  See if you can go to Settings -> Data Usage  from there you can pick a current or previous billing cycle and then use the vertical sliders to select a date range and it will filter the usage data per app to show you exactly what app(s) were using data during that time frame.

  • Export System Monitoring App Performance Dashboard data in CSV

    Hello,
    I would like to know if it was possible to extract the data of Solution Manager Dashboard (System Monitoring App Performance) inside a flat file ?
    I found some information on this page :System Monitoring App: Performance - System Reporting in SAP Solution Manager - SAP Library
    The query name is
    0SMD_DASH_SYSMON_PERFORMANCE and I would like to use RSANWB on the cube 0CCMPDATA to create a flat file but maybe they are a easier solution ?
    Thank you

    I have tried to find the information in a another way :
    TEMPLATE_ID=0E2EREP_ALLSYS_SYSTEMPING
    VAR_NAME_1=0SMDVTST
    VAR_VALUE_LOW_EXT_1=201408010000  (begin date of the day)
    VAR_VALUE_HIGH_EXT_1=201408132359 (end date of the day)
    FILTER_IOBJNM_2=0SMD_TIHM
    FILTER_VALUE_2=0SMDVTIHMCM
    FILTER_VALUE_TYPE_2=VARIABLE_EXIT
    FILTER_IOBJNM_3=0CALDAY
    FILTER_VALUE_3=0VDAYCM
    FILTER_VALUE_TYPE_3=VARIABLE_EXIT
    FILTER_IOBJNM_4=0SMD_GRTI
    FILTER_VALUE_4=DAY
    FILTER_IOBJNM_5=0SMD_GRDA
    FILTER_VALUE_5=DAY
    USE_PAGE_WRAPPER=PING
    VAR_NAME_7=0SMD_V_SID_M
    VAR_VALUE_EXT_7= <SID> (SID of the system)
    VAR_NAME_8=0SMD_V_SID_INT
    VAR_VALUE_LOW_EXT_8=%23VAR_VALUE_HIGH_EXT_8=#
    VAR_NAME_99=0SMD_V_INFOPR
    VAR_VALUE_EXT_99=0SMD_PE2H
    VAR_NAME_98=0SMD_V_INFOPR
    VAR_VALUE_EXT_98=0SMD_PEH1
    VAR_NAME_97=0SMD_V_INFOPR
    VAR_VALUE_EXT_97=0SMD_PEH2
    Do you think how can i export that information in a CSV ?

  • Bug found in Activity Monitor app

    Hello,
    I think I've found a bug in Activity Monitor.
    If you move the app from Applications/Utilities to Applications it will start up but the rainbow disk will spin forever, and the window will not be populated with data. Put it back into Utilities and it works again.
    The issue is that the location of activitymonitord seems to be hardcoded to be in the Utilities folder.
    The following steps are repeated endlessly:
    com.apple.launchd[1] (com.apple.ActivityMonitor[3061]): posixspawn("/Applications/_Utilities/Activity Monitor.app/Contents/MacOS/activitymonitord", ...): No such file or directory
    com.apple.launchd[1] (com.apple.ActivityMonitor[3061]): Exited with exit code: 1
    com.apple.launchd[1] (com.apple.ActivityMonitor): Throttling respawn: Will start in 10 seconds

    Hello,
    Thank you very much for your comment.
    Well, I think those apps and utilities are probably not designed well then. It goes against UI expectations if you aren't allowed to make a subfolder in Applications or Utilities folders.
    And, I have enough apps now that I need to make subfolders to keep it sane and quickly navigable.
    The only app I've found so far which dies is Activity Monitor. In my case, I have been launching it often to figure out why the Mac crashes and hangs so often. Badly behaving apps like this (just crash, not retry endlessly!) and apparently a lack of a supervisory system to kill them is a problem I think with the Mac.
    Thanks anyway, I lost this round I suppose!
    Matt

  • Activity Monitor.app won't open

    I have researched this like crazy and nothing has worked.
    I looked in my Console, and there are tons of iMovie errors(?) in there, and then there is one for the Activity Monitor that says:
    dyld: Library not loaded: /System/Library/PrivateFrameworks/GraphKit.framework/Versions/A/GraphKit
    Referenced from: /Applications/Utilities/Activity Monitor.app/Contents/MacOS/Activity Monitor
    Reason: image not found
    I ran 'repair permissions' and shut down the computer, restarted, and the Activity Monitor still will not open.
    I also opened the Terminal and typed in this:
    ls -la /System/Library/PrivateFrameworks/GraphKit.framework/Versions/A/GraphKit
    And it returned this:
    it returns this:
    ls: /System/Library/PrivateFrameworks/GraphKit.framework/Versions/A/GraphKit: No such file or directory
    But, being a new Mac user, I have no idea what this means.
    I have tried everything, with no luck, and I am hoping someone here can help me.
    Thanks bunches! Jules
    iMac   Mac OS X (10.4.8)   Intel Core 2 Duo

    Just for future reference, should someone experience this:
    I used the disk utility and repaired permissions.
    Then I inserted the OS disk and 'updated' the XcodeTools for the system.
    I then restarted the computer, and now I can open the Activity Monitor.
    It had something to do with my installing that X11 dealie a week+ ago I am sure.
    HUGz! Jules

  • System monitoring app

    Whats a good system monitoring app, sort of like Core Center?

    I have tried to find the information in a another way :
    TEMPLATE_ID=0E2EREP_ALLSYS_SYSTEMPING
    VAR_NAME_1=0SMDVTST
    VAR_VALUE_LOW_EXT_1=201408010000  (begin date of the day)
    VAR_VALUE_HIGH_EXT_1=201408132359 (end date of the day)
    FILTER_IOBJNM_2=0SMD_TIHM
    FILTER_VALUE_2=0SMDVTIHMCM
    FILTER_VALUE_TYPE_2=VARIABLE_EXIT
    FILTER_IOBJNM_3=0CALDAY
    FILTER_VALUE_3=0VDAYCM
    FILTER_VALUE_TYPE_3=VARIABLE_EXIT
    FILTER_IOBJNM_4=0SMD_GRTI
    FILTER_VALUE_4=DAY
    FILTER_IOBJNM_5=0SMD_GRDA
    FILTER_VALUE_5=DAY
    USE_PAGE_WRAPPER=PING
    VAR_NAME_7=0SMD_V_SID_M
    VAR_VALUE_EXT_7= <SID> (SID of the system)
    VAR_NAME_8=0SMD_V_SID_INT
    VAR_VALUE_LOW_EXT_8=%23VAR_VALUE_HIGH_EXT_8=#
    VAR_NAME_99=0SMD_V_INFOPR
    VAR_VALUE_EXT_99=0SMD_PE2H
    VAR_NAME_98=0SMD_V_INFOPR
    VAR_VALUE_EXT_98=0SMD_PEH1
    VAR_NAME_97=0SMD_V_INFOPR
    VAR_VALUE_EXT_97=0SMD_PEH2
    Do you think how can i export that information in a CSV ?

  • Ipad monitoring app without jail break

    i am in need of a monitoring app for my children's ipads and do not want to jailbreak them. i there are several apps that appear perfect for my needs, ie peektab, but they all require jail breaking. i've searched the app store and elsewhere online with no results. can anyone offer any advice or recommendations for such an app? thanks!

    I don't know of anything like that but you can set up Restrictions to prevent them from changing settings or purchasing things without consent. 

  • Battery monitor app that shows ACTUAL drain

    I see a lot of battery monitor apps that show a huge list of what the remaining time would be using certain features. I don't know what good this list of time is when you have a combination of them running.
    I am looking for a battery monitor that shows what is ACTUALLY running on my iphone and what percentage it is contributing to the ACTUAL drain of my battery. If I have the bluetooth, WiFi and ipod running, I would like it shown in a list and the percentage it represents to the load (and possibly what added time I would gain by turning it off)
    If the load of something running is really insignificant or absolutely required to have the phone operational, then it probably is not worth listing.
    I want to have the question QUICKLY answered:
    What can I turn off that is presently running to increase the remaining time on my battery?

    Basically anything and everything running on the phone consumes power. A better place to start would be ask yourself what are the minimum services you need to have running? Once that is answered, turn everything else off.
    If the load of something running is really insignificant or absolutely required to have the
    phone operational, then it probably is not worth listing.
    No one here can answer that for you. Example: Wifi and 3G are essential for me. But you might not need either.

  • HT1695 Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-f

    Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-fi) !!!

    cpupower frequency-info
    analyzing CPU 0:
    driver: acpi-cpufreq
    CPUs which run at the same hardware frequency: 0 1 2 3
    CPUs which need to have their frequency coordinated by software: 0
    maximum transition latency: 10.0 us.
    hardware limits: 800 MHz - 2.30 GHz
    available frequency steps: 2.30 GHz, 2.30 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz
    available cpufreq governors: conservative, powersave, ondemand, performance
    current policy: frequency should be within 800 MHz and 2.30 GHz.
    The governor "conservative" may decide which speed to use
    within this range.
    current CPU frequency is 800 MHz.
    cpufreq stats: 2.30 GHz:0,02%, 2.30 GHz:0,05%, 1.80 GHz:0,05%, 1.60 GHz:0,03%, 1.40 GHz:0,01%, 1.20 GHz:0,16%, 1000 MHz:0,38%, 800 MHz:99,29% (1017)
    boost state support:
    Supported: yes
    Active: yes
    25500 MHz max turbo 4 active cores
    25500 MHz max turbo 3 active cores
    25500 MHz max turbo 2 active cores
    25500 MHz max turbo 1 active cores
    Thax

  • Monitoring apps from OEM

    Hi,
    I have OEM 10.0.4 in my Redhat Linux 4 machine. I am able to see the agents that were preconfigured with oem and all the statues are available.
    Now, I want to configure a different db, or another Oracle app server or another app server like weblogic. How can I do that?
    I have a mysql db in my other windows machine. I want to monitor this? How can I do that?
    I would also like to monitor another Oracle app server in my windows machine. How can I do that.
    I think I need to download Mass Agent Deployment file(Oracle Management Agent (10.2.0.4) for Microsoft Windows x86, since the monitored app is installed in windows machine). After that what should I do?
    If the OEM and the agents that needs to be monitored are int he same machine, are the steps different?
    Thanks.

    Ok, now I am trying to monitor JBoss app server. I installed JBoss 4.0.2 and when I went to the OEM home page, I clicked targets>Application Servers and selected Jboss app server in the Add drop down.
    I gave the JBoss Application Sever Host value as localhost:8080, since the jboss is in the same machine.
    I gave the JBoss App server install home,
    then I gave the Operating system username and password.
    When I click next to goto the next step, I get an error saying "No Enterprise Manager Agent was found for the host.localhost:8080". Any ideas?
    I have the JBoss server up and running in port 8080.
    After this I also used the OUI to install an additional agent. The thing is I already have an agent10g folder along with oms and db folders. But I gave the installation path as the agent10g folder and it created a folder agent10g again.
    So did I miss something, I am still getting the same errors. Any ideas appreciated.
    Thanks.

  • Best temperature monitoring app.? Freeware or Shareware.

    Hi,
    I really need to know my G4's components' temperature, so if you know which temperature app. is the best and why, I'd really appreciate if you shared!
    I looked last night on the Version Tracker site, but it was kinda difficult to choose an app. Any favs out there? Freeware or Shareware, I'll take either.
    Thanks_
    G4 DP 1.0-1.2 GigaDesigns(DA DP 533mHz originally)   Mac OS X (10.3.9)   ATI 9000Pro, 1.5GB Kingston RAM, DIGI 001

    I use Temerature Monitor: http://www.bresink.com/osx/TemperatureMonitor.html
    I can't say whether or not it's the best, but it seems to work very well on both my G4 and G5.
    -DH

  • We need a good battery monitoring app

    We really need an app that monitors battery usage and breaks the usage down by each individual item--cpu, screen, each app, etc.
    It's a real pain to figure out what newly installed app may be causing excessive battery drain when you have many apps installed and there is no app that can tell use this information and from what I understand the developers aren't able to find a way to implement it either, thus the issue resides with webOS.
    This is a major necessity in my opinion especially because webOS is designed for heavy multitasking.
    Post relates to: HP TouchPad (WiFi)

    You can send Pages and other iWork documents to DropBox with the WebDav function (sharing via a server) and the sharing options of Pages, Word or PDF are available to you. The good news is this is easily done via a service called DrobDAV. The bad news is there's a fee, but there's a free trial and an educational discount.
    This article at Tech Inch explains it. If you rely on DropBox, as I do, and use Pages, etc on your computer, it's really great. Generally, iPad apps that support WebDav can send the doc to DropBox with this add-on.
    http://techinch.com/2011/02/02/integrate-dropbox-with-pages-keynote-and-numbers- on-ipad/
    There's also a free DropDAV limited service, but files are limited in size 1MB.
    And of course Pages, etc can share to iDisk, which is being replaced by iCloud.

  • Using KAL to monitor app server behind CSS

    We have had issues in the past where the app server has crashed and the CSS would keep sending connections to the front end webserver.
    I am trying to find a way to monitor/keepalive based on the availability of an app server. The webserver is acting as a database app server front end.
    I would like to be able to use the CSS to send a fixed set of (form style or XML) input to the ASP webserver so that it will return an expected output (from the app server) that can be hashed. The GET hash comparison will tell the CSS that the app server is correctly responding to the input.
    Any one have any experience with things like this?
    Carl

    Thanks Steve,
    I created a script that I think will do what I want, but I am not really clear on a couple of points.
    I could not find anything to expand on the syntax for the socket send command. I noticed that some scripts that were posted used what seems like a directive to use the GET method but did not include any input.
    socket send ${SOCKET} "GET ${webpage} http1.0\n\n"
    It seems there may be some undocumented arguments to the socket commands. How do I find them?
    I need to send an XML query as if it came from a form so the webserver will return the webpage I expect it to. The script I have so far is;
    ! Filename: ap-kal-dbstat
    ! Parameters: None - must be coded in script
    ! Description:
    ! This script will attempt to connect to a web server
    ! front end to a database host and
    ! "GET" an html page with dynamic content. The "sendstring"
    ! is some XML query which should return an expected output.
    ! The script checks the contents of the page for the returnstring.
    ! If found, the script passes.
    ! Failure Upon:
    ! 1. The correct arguments are not supplied.
    ! 2. The CSS is unable to connect to the host.
    ! 3. The string is not found in the return page.
    no echo
    if ${ARGS}[#] "LT" "5"
    echo "Usage: ap-kal-dbstat \'Hostname Port Page Sendstring Returnstring\'"
    echo "Example: ap-kal-dbstat \'10.1.1.1 80 webpage.asp XML=string form-element\'"
    exit script 1
    endbranch
    set host "${ARGS}[1]"
    set port "${ARGS}[2]"
    set page "${ARGS}[3]"
    set sendstring "${ARGS}[4]"
    set returnstring "${ARGS}[5]"
    set EXIT_MSG "Host ${host} not responding on TCP port ${port}."
    socket connect host ${host} port ${port} tcp session
    set EXIT_MSG "Socket string: String sent."
    socket send ${SOCKET} "GET ${webpage} ${sendstring}"
    set EXIT_MSG "Socket->Waitfor returnstring not found or timed out waiting."
    socket waitfor ${SOCKET} "${returnstring}" 500
    set EXIT_MSG "Socket: disconnected"
    socket disconnect ${SOCKET}
    echo "String ${returnstring} was found."
    no set EXIT_MSG
    exit script 0
    Does this look like it will achieve my objective?
    Carl

  • 2nd monitor & app problem

    i copied and pasted this from another mac forum... there was no reply. sometimes i have the same problem with apps such as cdxtract, battery 3 and Kontakt 3 in standalone mode.
    Not Logic related but any ideas coz this can be very annoying if i forget to drag from 2nd monitor to the mac before hand.
    I have a 2nd monitor attached to my Mac and if open an app Window on the 2nd monitor the next time I start the app the Window always defaults to the 2nd monitor (even if the 2nd monitor is turned off). Since I don't always remember that the app was opened on the 2nd monitor I would like a way to force the app to default to the primary monitor so I don't always need to turn on the 2nd monitor

    The second screen is an extention of the primary screen and when you switch spaces, both will change to a different space.
    There is a solution, but it requires associating the app with All spaces in System Preferences > Expose & Spaces > Spaces tab > Assign the app to Every Space.  Then as you can spaces that app is present on all spaces. 
    Regards,
    Captfred
    If you don't want the browser in the primary monitor for all spaces, then use two different browsers.  Safari for the primary browser and Firefox for the browser moved to external display.  Then define Firefox in all spaces and Safari to only one.

Maybe you are looking for