Monitoring conferencing sessions in CUCM ( How many ports used for conferencing)
Hi
How is it possible to see how many conferencing session or conferencing party is used in CUCM 9.1 system. We are using conference bridges on call manager resources. But I 'm not sure, how many conferencing capacity we have?
Is there any clue to see it?
Hi there!
Please find in RTMT the Performance section. Then choose needed cucm server and proceed to Cisco SW Conference Bridge Device.
You can monitor this things:
RosourceActive - shows how many parties connected
RosourceAvailable - remained capacity
RosourceTotal - total sw bridge capacity
SWConferenceActive - shows how many conferences are active on sw brigde
and other.
Similar Messages
-
How many port numbers do I need assigned for an XIR3 deployment
How many port numbers are required per XIR3 environment on Linux Red Hat 4/JBOSS/? I only plan to use the following apps (CMC, Infoview, Designer, Report Migration Tool, Import Wizard).
Am I right in thinking it's four ports ?
1. 1 for the application
2. 1 for SIA?
3. 2 for CMS (Name server port, request port)
If this is incorrect could someone clarify how many, and what for?
Many thanks in advanceHi there,
When I look at the Servers list and look at the CMS server I see three potential port numbers:
1. Request Port
2. Hostname or IP Address
3. Name Server Port
I know we need the third one so can I ask why you say you only need two servers for the CMS, as the list above seem to be suggesting three?
Thanks for your help in advance -
What is the model number and how many ports in the back?
What is the Model number and how many ports int he back?
You can compare your yourself here:
http://www.apple.com/wifi/
The AirPort Express is Model Number A1394
The AirPort Extreme is Model Number A1408 -
How many ports do I need to open for Java InfoView? - CR Server 2008 v1
Hi,
We are using Crystal Reports 2008 V1 (BuildVersion=12.1.0.114.CRS2008_V1). CMS runs on Oracle 10g. The product I need help for is InfoView.
The report server is behind a firewall. I would like to know how many ports do I need to open and what they are so that I can access to InfoView (Java Version) from internet.
The client's IT blocks all ports, except HTTP 80 and HTTPS 443. Is it possible to configure InfoView to run on port 443? Would one port be enough? Port 80 is being used by another application.
I would appreciate any light to be shed on this issue.
Thanks,
SinanInfoView will just need a single port. However CR Server 2008 has additional component who interact. I believe that CR Server 2008 doesn't allow a distributed installation so then the only port that should be opened on the firewall is to reach the web application and from the application server towards the database server hosting the CMS database.
Hope this helps...
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken
http://twitter.com/mfoeken -
How can i get the port used for https
Hi All,
does aynbody knows how can i get in the portal the port used for https connection, cause the link send by e-mail notification, when user has been invited in a room doesnt work...
i tried to use the command netstat -ao and i tried use the port that i get there.. but then i get message, when click on the link: "The page cannot be displayed"
we have following settings:
server port: ??
Web Protocol: https://
Thanks for suggestions!
KarolHi Karol,
by navigating to:
Content Administration -> Collaboration Content -> (Room Administration -> Related Topics) -> Configure Backend Properties for Rooms
you can change the Webprotocol to http:// and set server port to 50000 (default port).
To see the SSL Port you can go in the Visual Administrator to Services -> "HTTP Provider Services".
http://help.sap.com/saphelp_nw04/helpdata/en/a2/f9d7fed2adc340ab462ae159d19509/frameset.htm
Hope this helps,
Robert -
How can i find how many smartforms using a particular smart style
hi experts ,
how can i find how many smartforms using a particular smart style
thnks in advanceHi,
Go to your smartform
Click on Form Attributes->Output options> There you can find the Style.
Reward points if useful.
Thanks! -
HOw many subalters needed for to find a number in 1000-2000,2001-3000,3k-4k
HOw many subalters needed for to find a number in 1000-2000,2001-3000,3001-4000
Hi
3k to 4k means 3001 to 4000?
Assuming this is true you need 3 sub alerters. Use the between operator to compare your values.
Regards,
Stratos -
Hello All
Please say how many MDM certificates for different MDM servers can be generated under one Apple Developers Subscription?
Thanks in advanceSo no Meraki MDM?
Supports Multiple VPP accounts, completely free, fully encrypted, and quite secure.
Otherwise, you might want to take a look at the mdm that Spiceworks has. -
How many instance created for 100 request in servlet?
Let me know the answer
STM12 wrote:
Subject: how many instance created for 100 request in servlet?
Let me know the answerInstances of what? -
In time capsule, can ethernet ports used for windows pc as a LAN?
in time capsule, can ethernet ports used for windows pc as a LAN?
i am connecting my windows pc to the time capsule ethernet prots but those pcs are not shown in my macbook or those windows pc also can not see my macbook pro. i am facing the problem...
-
ACE 4710 what are these ports used for?
Hello, what are these ports used for please? What can I do with them?
Thank you
Sent from Cisco Technical Support iPhone AppHi Bilal,
They are reserved for future use. Please have a look at the link below:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/4710/hardware/installation/guide/Overview.html#wp1043136
Regards,
Kanwal -
Hi what is ALE how it is useful for SAP CRM?
Hi
Experts can any body tell me what is ALE,SOAP,XML I know the full form Application linking and unabling but how it is useful for CRM Functional Consultants where it used in CRM Scenario?
VenkatHi Venkat,
ALE is a integration Technology used to integrate SAP system with Non SAP Systems.
<b>Definition</b>
Application Link Enabling is the technical basis for integrating business processes in a distributed system environment. It includes developer and testing tools and preconfigured ALE Business Processes delivered in the standard R/3 Release. ALE has functions for managing messaging and for handling communication and application errors.
<i>To find more details about ALE Just Check out the links:</i>
<b>ALE/ IDOC</b>
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
<b>ALE/ IDOC/ XML</b>
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
For CRM Functional Consultant interaction of the CRM system with other SAP and Non-SAP system is a major issue. The consultant takes care of all the details and suggests the possible Integration Technology with the help of a technical consultant. This depends on the CRM scenario as what data ( master, customizing, transaction) you want to transfer to the system.
All these basically falls under the different integration technologies.
Thanks,
Samantak.
<b>Rewards points for useful answers.</b> -
Port used for Linksys Smart Wifi
Good day,
Please i would like to find out the port used for Linksys Smart Wifi Login via the Internet. I have blocked alot of ports on my router and i am not able to login via the Internet again.Blocking unknown isn't normally required because the router firewall does that normally. Blocking specific port is good but you need to know what they are used for. UPnP devices will open ports as needed if you have UPnP enabled on the router.
Sorry I don't know the specific ports or process remote access uses. I sure it's a dial out feature and not a dial in.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support -
How to know status of session in tables& how many status are available?
Hi Experts,
these are tables having of BDC Session status tablels APQD, APQI , APQL..
could any one tell me how to find the error status in the tables.
APQL is the session log table but i am unable to find the details of error session.
error status found in APQI table.
and also tell me how many status are avilable for session?
and tell me the meaning .(like E for error )
Thanks.Hello Kalyan,
Please find the status of the sessions as below:
1. New
2. Incorrect
3. Processed
4. In Process
5. In Background
6. Being Created
7. Locked.
I think you are asking about the status of the session. it will be in SM35 as tab strips. If you are asking about the status in the LOG it will be Success or Error and it will update at runtime through BDCLM-MART field.
I think it will help you.
Regards,
Subrahmanyam. -
How many cert need for Lync 2013
How many cert I need to buy???
[internet] <--> [TMG] <--> [Lync edge]
[Lync front end]
is it correct to buy this two cert. (then what's the function for)
Cert 1 for TMG
Lyncrproxy.abc.com (for
Reverse Proxy???)
Meet.abc.com (for web conference)
Dailin.abc.com (for phone??)
Lyncweb.abc.com (for ???)
Lyncdiscover.abc.com (for Mobility client setup)
Cert 2 for Lync edge
Sip.abc.com (for SIP Access)
Lyncwebconf.abc.com (for Web Conferencing Edge service)
Lyncav.abc.com (for A/V service)
ThanksYou can use one cert across the Edge and Reverse Proxy as follows:-
sip.abc.com - Lync Access (use as subject name and assign to Edeg Access) (Edge)
Lyncweb.abc.com - For distribution Group and addressbook service (TMG)
dialin.abc.com - webconferencing dialin URL (TMG)
meet.abc.com - Web conferencing meet URL (TMG)
Lyncwebconf.abc.com - Web Conferencing mnedia (Edge)
lyncdiscover.abc.com - mobility (Edge)
The simplest way of requesting this cert is from the Lync Deployment Wizard on the Lync Edge Server. Be sure to marek the request as exportable so the cert can be exported from Edge and imported to TMG.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Lync Sorted blog
Maybe you are looking for
-
Bug Report: Shortcuts for Adjustments in 3.1
I have verified that bug with a brand new test account (Aperture 3.1 and OS 10.6.4 with latest Pro Update): - Make an adjustment to an NEF-file - save that adjustment as a preset - assign a keyboard shortcut to that specific adjustment Switch to the
-
How can you create an activity as subsequent act. of more than one activity
Hi. I want to create an activity as subsequent activity of more than one activity. I am using FM CRMXIF_ORDER_SAVE, but if I write data structure CRMXIF_DOC_FLOW with more than one item the system shows the error CRM_COPY 010 More than one predecesso
-
How can I rebuild an iTunes library, lost due to network HD failure?
I had it installed on separate server disc, but disk failed. I'd like to start with new library, based on iCloud, and only using the purchased content initially. The boards seem to suggest issues with iCloud and iTunes Match, so I am reluctant to go
-
Join configuration cannot be resolved. Reason :more than 1 of the detail .
Hi Guys, I am getting a following error while opening a discoverer report. Join configuration cannot be resolved. Reason :more than 1 of the detail folders uses non-aggregated items .I know this error is regarding the fan trap. The report is built f
-
Why Do We Need Java Adapter module ???
Hi All, Why Do We Need Java Adapter module ??? What is the Use of it ???? Where we Write the code for this Regards Vamsi