Monitoring data does not match

Hallo! Has the following problem. Processor of a virtual machine loaded 100% but in dashboard azure peak loading of this VM 6-10% What does it mean? Why monitoring displaying incorrect data?

Hi,
Thanks for your reply.
Since it is an issue related to Azure management portal, I recommend you to ask in the forum below for assistance if the issue persists:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=windowsazuremanagement
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Job Cancelled with an error "Data does not match the job def: Job terminat"

Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job   Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?
Edited by: dharmendra gali on Jan 28, 2008 6:06 AM

Dear Friends,
_Urgent : Please work on this ASAP _
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?

Background Job cancelling with error Data does not match the job definition

Dear Team,
Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
Let me describe the problem clearly.
We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
Time     Message text                                                                       Message class Message no. Message type
03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated        BD           078          E
03:46:08 Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
Please help me in resolving this issue.
Thanks in advance,
Sai.

hi,
If you have any GUI function modules used in the program of job
you cannot run it in background mode.

Stock transport order requiremnet date does not match in tranRRP3) &MD04

STO delivery date does not match in transaction MD04 (ECC 6.0) and RRP3 (SCM5.1). This situation occurs when delivery date in STO is past due. During Shipment Scheduling & avaibilty check, materail staging/availability date(EKET-MBDAT) get updated with current date. This EKET -MBDAT date is reflecting in the stock requirement list as a requirement date which is correct. Still APO product view screen dispalys the past due date as a requiremnet date instead of date in MBDAT.
Please let me know in case of any more clarification on this.

Dear Sanjay,
STO Delivery Date is receipt date at destination location. This minus Transportation Lead time is STO requirement date at source.
When you conduct ATP check for this PO/STO, your committed date is updated at source and delivery date will be updated as committed date plus TL lead time.
Do check your GR/GI times in Product Master as primary date mismatch issue.
If you are using any Customized program for updating EKET-MBDAT, it wont automatically trigger the change date in APO.
In such cases you need to run CCR in APO and reconcile.
The better way is to periodically schedule IM initialization (RIMODINI). This maps all R3/ECC data in your IM for PO/STOs and you would see the consistency in APO and ECC.
Regards,
Bipin

Regarding "Data does not match the job definition; job terminated"

Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?

Hi dharmendra
Good Day
How are you
I am facing the same problem which you have posted
By any chance have you got the soultion for this
If so please let me know the solution for this.
Thanks in advance.
Cheers
Vallabhaneni

ORA-23327: imported deferred rpc data does not match GLOBAL NAME of ..

Hi,
We took an export of a production database in Oracle 9i (9.2.0.7) and created a new database on a test server with Oracle 10g (10.1.0.5)
The original production database was called DC20 and our new test database is called SD20.
Looking at the logs after the import we're seeing this error:
"ORA-23327: imported deferred rpc data does not match GLOBAL NAME of importing db"
We've looked into it a little and it seems to make sense because the names of the databases are different, and from what we've read, we really didn't need to do a full import including SYSTEM anyway. We also came across a solution telling us:
"If you are not using Replication on the target database, these errors can be ignored. However, you should subsequently remove all the replication objects by running:
$ORACLE_HOME/rdbms/admin/catrepr.sql, then catproc.sql"
What I was wondering was if someone could validate that running these scripts and ignoring the errors will be ok, or if they'll cause us issues further down the line.
In case its needed, heres my Export parameter file
"FULL=Y
DIRECT=Y
LOG=E:\Exports\DC20\Log\expDC20.LOG
FILE=E:\Exports\DC20\Data\DC20.DMP"
and heres my Import parameter file
"FULL=Y
COMMIT=Y
GRANTS=N
IGNORE=Y
BUFFER=500000
FILE=E:\Imports\SD20\data\SD20.dmp
LOG=E:\imports\SD20\log\impSD20.LOG"
Thanks for your help!

Thanks Neil, we did already see this note and added it to our list of possible solutions. After we found this one, we also found the one I quoted, which would seem to be the path of least resistance (it would save a good 10 hours in import time if nothing else).
However, if we can't do what I'm asking about in my original post however, the note you mentioned will be our next route..

Image on monitor window does not match red playhead as it moves

While editing a movie, imported slides do not match the monitor view. As the red playhead moves along to the right, when a slide changes the image on the monitor remains on the previous slide. After about 15 secs the next slide appears, but briefly then it's on to the next slide.
This is annoying. I have tried everything I can think of to overcome this (eg rebooted, pulled the plists, varied length of slides, started new movie etc). Fortunately, it does not happen with imported movies from the video camera. I can overcome the problem by placing transitions between all the slides, eg use a one-frame cross-disolve, but I'd rather not have to trick it this way. Does anyone have any ideas on this please? Thanks,
Keith

I also had the same problem. I have discovered that it is due to the upgrade of Quicktime. To reinstall an older version of Quicktime is quite tricky but I have solved the problem. There is no need to uninstall Quicktime 7.6.6. as this will be done later during the installation of the earlier software. Try this: Download a copy of Pacifist. From www.mac.oldapps.com download a copy of Quicktime 7.6.4. Open Pacifist, drag the installer box icon of QT 7.6.4 onto the Pacifist window. Click open package. When asked click "Replace" check the "all" box. This will over-ride QT 7.6.6 replacing it with 7.6.4 and your problem should be solved. Good luck! Let me know how you get on, please.

Query data does not match with Multiprovider

hello,
I am as confused as my subject.
I executed the query from Multiprovider, which getting the data from sales and inventory cube.
Everything works fine until I try to validate some of the data.
I can validate some early records but I cannot see later ones in any of the cubes or multiprovider.
I deleted the data and loaded all over again but didnt work.
I am trying to display the record from Plant, material and calday ... i do see the date and plant # but not material #.
I hope I am making sense to you guys.
Any input would be appreciated.
Khalid

Hello Kalyan,
Material is part of both cubes (inventory and sales) and I did flag it in multiprovider when selecting "display data" > dimensions.
I am not sure if it makes difference ... there is another cube (store planning) attached to same multiprovider ... which not feed data but as you know does not report on material level.
Do you think it could create the problem. Again (store planning) cube is not feeding data to multiprovider at the moment.
Thank You ... any other suggestion.
Khalid

Outline Agreement (Contract) data does not match with EKPO table.

Hi,
I have created a outline agreement(Contract) with net price as 100 / 1 Kg. But when I go to EKPO table in front of Net Price it is reflecting net price as 1 / 1 Kg. So it shows that it is dividing the net price by 100 in Table EKPO. This is happening with the currencies which are maintained in T Code OY04 (Currencies like JPY, CLP, ESP, ITL) with decimals as 0.
Rest all curriencies which have not maintained in OY04, there is no problem in EKPO as the data matches with Outline Agreement Net Price.
Request you to please provide the input to resolve the same.
Thanks & Regards,
Neeraj Singh

Hi Neeraj Singh,
The value of data stored in EKPO depends on the decimal places defined
for the currency. In standard the decimal places is taken as 2 . Therefore the value will be
the same as order price if the currency is defined for two decimal
places ( default is 2 ).
However, if the decimal places for JPY is defined as zero the table
will show a value of price /100. If you choose a currency with
3 decimal places the value in the table will be price * 10 and so on.
Example:
Currency                          Decimal places      Order price      Value in EKPO
SGD                                               2               2000               2000
NLG                                               2               2000               2000
JPY                                               0               2000               20
KWD (Kuwati Dinar)                     3               2000               20000
ITL                                                 0               2000               20
All currencies that do not have any decimal places at all
(TCURX-CURRDEC = 0) must have EKPO-NETPR multiplied by 100.
Please check SAP notes which may be of help to understand this issue 53206 and 137626
The issue you reported in not an error but standard. I hope this information is of help.
Regards,
Lorraine
Edited by: Lorraine Donnelly on Jul 12, 2010 6:57 PM

Download Interactive Report data does not match on-screen data

Hi,
I have a page which has a process which runs a query and returns a random % of rows from a table, and saves this into a collection.
Then, based on the random rows, I want to select data from another table, where the rows match certain columns in the collection.
I have created a query to select the data I want, and have it displayed in an Interactive Report region.
The data on the screen is fine, but when I go to 'Dowload' the data to csv or excel from the Interactive report, the data is different.
I have also created a normal report region with the same query, and when I download it from here, it works fine, so I know it has nothing to do with the query.
Any ideas?
Amanda.
The process details are:
Process Point: On Load - Before Regions
Run Process: Once per page visit
Then in the Interactive report query is something like:
Select ..
from
DATA_TABLE c
select
c001 User_Id,
c002 Account_No,
c003 Transaction_Date
from htmldb_collections where collection_name='PX_COLLECTION'
*) d*
where
c.user_id = d.user_id AND
c.account_no = d.account_no AND
c.transaction_date = d.transaction_date

Hi,
This is because of web caching. You should invalidate the page caching in the access tab of page properties or you just change the page url with a dummy paramater like this
http://domain/portal/page?_pageid=6,1,6_11&_dad=<dad>&_schema=<schema>&1=1
Here &1=1 is a dummy parameter
This will invalidate the cache and the page will be refreshed.
Thanks,
Sharmila

Sort data does not match song info

I've just discovered that some of my songs have sort data from different files. Short of going though all my music song by song is there a way to clear all sort data?

Generally setting a common Album Artist will fix split albums.
For deeper problems see Grouping tracks into albums.
tt2

Image on monitor window does not match playhead as it moves

I am resurrecting this earlier thread because, although it received a star as "solved" it was not really solved. Since upgrading to Quicktime 7.6.6 I, too, have had similar problems, as apparently have several others.
Basically, on iMovie playback the playhead will skip through a still, so that the playback on the screen lags behind, and then will suddenly catch up by displaying the skipped still in a shortened duration as the playhead moves on. Makes it difficult to edit. Video clips are not affected. With me the issue occurred after I upgraded to Quicktime 7.6.6. Oddly, when I reverted back to the previous version, 7.6.4, the problem still persisted. I did the usual deletion of the com.apple.iMovie.plist file, and a permissions repair, but that did not help.
So, I am interested in whether anyone has solved this issue. There are workarounds, like inserting a one frame cross-dissolve and converting the stills to video by using Ken Burns with the same starting and end points. I am more interested in actually resolving the issue. Comments welcome.

Hi Rich 839. I also had the same problem. I have discovered that it is due to the upgrade of Quicktime. To reinstall an older version of Quicktime is quite tricky but I have solved the problem. There is no need to uninstall Quicktime 7.6.6. as this will be done later during the installation of the earlier software. Try this: Download a copy of Pacifist. From www.mac.oldapps.com download a copy of Quicktime 7.6.4. Open Pacifist, drag the installer box icon of QT 7.6.4 onto the Pacifist window. Click open package. When asked click "Replace" check the "all" box. This will over-ride QT 7.6.6 replacing it with 7.6.4 and your problem should be solved. Good luck! Let me know how you get on, please.

Delivery date does not match sales orders proposed delivery date

when i create sales order the requested delivery date by default is todays date and if nobody changes it, it will stay the same even after i save the order but the acutal delivery date is diffrent in the sales document or delivery document
can anyone please throw some light on it
Thanks in advance

Hi Raj,
Req D Date is the date on which teh custoemr wants the goods to be delivered. But it wont be possible always. So there will be an availability check on the stock of that material and based on the availability and transportation lead times, the possible delivery date will be determined and populated at the schedule line level of the document.
Hope this clarifies your doubt.
Reward if this helps.

Hexadecimal Reading does not match the reading of RealTerm Serial Capture

Hi
I am reading the output of a serial device that spits out hexadecimal characters. When I read its serial output with the VISA read block (using a string display with HexDisplay option on) I am getting hexadecimal characters. However, when I read the output of the device with a serial data capture program, such as RealTerm, the captured data does not match with the ones that I read in my string display in LabVIEW. I know for sure that RealTerm spits out the correct hexadecomal characters since these characters are the same as the ones I am expecting. ( I am actually looking for some specific header characters that I don't seem to get when I read with LabVIEW).
Is there anyone out there who has an idea what the problem could be?
Thank you very much.
Serdar

Hi;
Attached is the screenshot of RealTerm and the LabVIEW output. The hexadecimal character that I am specifically looking for is 0X777F ( This indicates the beginning of the data whose format is 0x7FFF, 0x71DF, 0x0010, 0xFFF0, 0x0022, 0xFFA0, 0x0050, 0x0CCB, 0x0, 0x0, 0x0145). In the realterm screen shot, we can see the characters 0XFF7F and the next 10 16-bits data words. Do you have any idea where I am making a mistake?
By the way, another question: I think 0XFF7F reads as 777F. is there any command that I can use in LabVIEW that allows me to read these as 777F right off the bat?
Thank you very much for the response.
Serdar
Attachments:
LabVIEW Screen.png ‏152 KB
RealTermScrenShot.PNG ‏89 KB

Xorg- Nvidia card- CRT Monitor- No. of created screens does not match.

Hi, all.
Did a new install of Arch on a spare PC the other day. I'd forgotten how great the distro was. I've run it for a few days and am happy with the X environment etc, so decided it's time to install Arch on my main PC.
The installation went fine and I rebooted into my new environment. I added a user and moved onto installing X.
I followed the wiki and started off just using the VESA driver, as I don't have any need for amazing graphics acceleration. I got a message from my monitor saying 'Out of Sync' (or similar). I half expected this, as it happens sometimes when I install new distros and X doesn't automatically configure my Sun GDM-5410 monitor correctly.
I usually follow this by running 'Xorg -configure' and copying the new config file to /etc/X11/xorg.conf.
For some reason that didn't work. I got an error message saying 'Number of created screens does not match number of detected devices'.
I've done some searching for solutions and installed the Nouveau driver, but I just can't seem to get X to work.
Can anyone help?
Many thanks,
Chris.

and if you try this? (not a solution, but could be a start)
delete your /etc/X11/xorg.conf (you can generate a new one later if needed )
make a file like this:
/etc/X11/xorg.conf.d/10-monitor.conf
Section "Monitor"
Identifier "MySunMonitor"
VendorName "Sun Microsystems"
ModelName "GDM-5410"
DisplaySize *** see in link ***
HorizSync *** see in link ***
VertRefresh *** see in link ***
Option "dpms"
EndSection
Section "Device"
Identifier "*** as in /etc/X11/xorg.conf.d/20-nouveau.conf ***"
Driver "nouveau"
EndSection
Section "Screen"
Identifier "Screen0"
Device "*** as in /etc/X11/xorg.conf.d/20-nouveau.conf ***"
Monitor "MySunMonitor"
DefaultDepth 24 #Choose the depth (16||24)
SubSection "Display"
Depth 24
Modes "1024x768_75.00" #Choose the resolution
EndSubSection
EndSection
link:
http://www.sunshack.org/data/sh/2.0/inf … t_CRT.html

Monitoring data does not match

Similar Messages

Maybe you are looking for