Monitoring e-mails in GroupWise 7.0

I am a district-level administrator with a school district in Arkansas
and we notify our employees that e-mails may be monitored for
inappropriate use. However, my Technology Director tells me that
GroupWise doesn't have this capability because e-mails aren't "retained"
in any way, such as in a server, etc. Prior to installing GroupWise a
few years ago, we used networking software from another company and we
did have that capability.
I'd like to know if there IS a way to monitor e-mails through GroupWise
and how we can obtain the ability to do so.
Thanks.

Dave Parkes wrote:
> Try something like GWAVA Reveal
If you need "long term storage" then you might need something like Nexic
Discovery even.
Danita Zanre
Novell Support Forums Volunteer
GroupWise 7 Upgrade Guide!
www.caledonia.net/gw7upg.html

Similar Messages

Monitor Unix Mail Queue using java

Hi! ,
I want to monitor unix mail queue using java. how can i proceed..
Please advice..
Thanks..
Ganesh

Google and see if there is an API which lets you monitor it.
Kaj

Monitoring Notification Mailer

Guys,
We have an issue with notification mailer needing to be restarted on a regular basis. Is there a common method of monitoring notification mailer. Can a cron be setup to send an alert when it goes down.
Thanks in advance,

Hello
First off, please check the WF mailer log file on the concurrent tier under $APPLCSF/$APPLLOG. The file is named FNDCP*txt - check the latest ones. You should be able to see errors there pointing out to the issue that is killing the mailer.
Now, to answer the question directly, you can check fnd_svc_components. There you will see the status of the WF mailer and if it appears not running then you can create your alert based on it. A query like this might do:
select component_name, component_status
from fnd_svc_components
where component_type='WF_MAILER';
Regards,
Alejandro

SCOM+Exchange2010+monitoring+collecting mail flow logs

Hi, I'm looking for the solution for :
SCOM+Exchange2010+monitoring+collecting mail flow logs
is it possible??
thanks
Paul

http://mrmapi.com/2012/11/06/monitoring-exchange-2010-sp2-with-scom-2012/
http://raymondleo.wordpress.com/2013/04/11/get-exchange-2010-management-pack-installed-and-working-on-scom-2012/

Mail and GroupWise set up issues

Hi,
I use GroupWise for my school e-mail. I have been able to set up my gmail with POP on Mail but I keep having issues trying to set up my school's e-mail. I looked up the set up options here:
http://www.newschool.edu/at/help/helpdesk_doc/popmail.html
I did everything that is listed. When setting it up in Mail the incoming server set up works perfectly. But when I try to set up the outgoing server it just keeps telling me it's failing to connect.
Also on a side note I would prefer not to set up the account with IMAP. That's what a friend suggested I try and I did that a couple months ago but I just hated the way it works with Mail and even led to me going back to using just online Gmail. But I did miss the nice interface of Mail so I am trying again to figure this out.
Any help would be great! Thanks

Thanks for the reply.
For some reason 587 didn't allow the incoming server to work. But when I did un-check the SSL in advanced options it automatically put 110 for the port (which I changed at first to 587). After 587 didn't work, I tried 110 out and it seems to be working, but I'm not sure if the outgoing server is working.
Also, for some reason none of the e-mails from the GroupWise server are loading on to Mail.
I've been searching everything (GroupWise options and there Help & FAQ section, all over google, etc.), trying to find a way to enable POP on GroupWise but there isn't any option like that. Maybe I am missing something?
Also at this point even if I enable POP, if my outgoing server doesn't work I will only be able to receive e-mails but not send them, correct?
I really am trying to find some sort of discussion where someone else had the same problem as me, but no such luck. Seems pretty complicated because this should be easy to set up.
Anyway, once again any help at all is greatly appreciated.

Mail and groupwise

I recently joined a group that uses Novell Groupwise system. I have been trying to get my mail application to send and/receive their e-mail, but I am only able to get mail, not send it. Any ideas?

What type of account - POP or IMAP?
When selecting send for a message with this account, the message doesn't go to the Outbox mailbox either?
Are you also accessing an email account and SMTP server with the Mail.app that is provided by your ISP used for connecting to the internet?
If so, try selecting your ISP's SMTP server to send messages with this account which is invisible to all recipients.

Business Process Monitoring - E-mail notification

Hi all!
I'm using BPM but i´m having problems with the e-mail notifications.
In the Jobs option I´m receiving the e-mails correctly, but in the dialog transactions I do not receive anything. The main problem is that I can see in RZ20 (in the satellite system) that I do have pendind alerts that werent even generated in SolMan.
Does anyone has any idea what could be happening?
Thanks,
Lucas

The SAP Note 1158695 was applied and succesfully solved the problem I was dealing.
Tks,
Lucas

Mail for Groupwise ?

What is a best solution for Novell Groupwise email and calendar synchronization after Nokia's decision of discontinuing Intellisync development ?

The best thing that I could think of is from Novell itself. Go to their support site & see if they have apps for mobile phone. Enterprise Server of Novell after ver. 6 or 7, if I'm not mistaken is now running on Linux, most likely linux support is available regarding messaging.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Monitoring mail queue

One of my applications uses the HTMLDB_MAIL API extensively to send out status change notifications, reminder emails, etc.
It just does HTMLDB_MAIL.SEND() and forgets about it.
If my SMTP server is down, there is some network glitch, or whatever, the users don't get their emails and causes a lot of confusion.
Does anyone have any ideas on how to monitor the HTML DB mail queue to ensure that it is properly flushing the mails out as it should?
Thanks

You could setup a job which monitored the mail queue -
jes@SPDB1> desc htmldb_mail_queue;
Name                                                                                                              Null?    Type
ID                                                                                                                NOT NULL NUMBER
MAIL_TO                                                                                                                    VARCHAR2(2000)
MAIL_FROM                                                                                                                  VARCHAR2(2000)
MAIL_SUBJ                                                                                                                  VARCHAR2(2000)
MAIL_CC                                                                                                                    VARCHAR2(2000)
MAIL_BCC                                                                                                                   VARCHAR2(2000)
MAIL_BODY                                                                                                                  CLOB
MAIL_BODY_HTML                                                                                                             CLOB
LAST_UPDATED_BY                                                                                                            VARCHAR2(255)
LAST_UPDATED_ON                                                                                                            DATE
jes@SPDB1> select count(*) from htmldb_mail_queue;
COUNT(*)
         0Personally, I call htmldb_mail.push_queue to push the mails to a mail server (Sendmail/Postfix etc), it's then the mail servers "responsibility" to deliver the mails. I monitor the mail server queues/bounces/deliveries/accepts etc using a mixture of Perl and Shell scripts.

Mail file attachments from Vibe using GroupWise - easy ?

Getting attachments in e mails from groupwise into Vibe is as easy as drag and drop.
However in Vibe when in the webinterface or in Groupwise (same thing...) there seems to be only one way to send an email including a file that comes from Vibe:
1. go to the file
2. download it to local storage
3. create a mail and attach - or drag the file into the open mail window
What I am looking for is in the vibe file action menu maybe a "Send as mail"
Or in GrouupWise a simple drag of the file to the "New Mail" button.
That would be really simple (and user friendly)
Are we looking at an ER, or have I just missed something extremely obviuos ?
If I need to code a JSP then I certainly need directions !
Bjrn

bkelsen,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Apple Mail 250 MILLION incoming messages (Mavericks)

A few weeks ago I upgraded to Mavericks.
Mail was working great but now I'm having all kinds of problems.
I've seen there are lots of other people having similar problems, but one I have not seen anyone post is...
In the "mail activity" window, below the list of mailboxes, I have a HUGE number of incoming messages.
Today it is up to over 250 MILLION incoming messages!!!!! Not hundred, not thousand but MILLION And the number is still increasing!!
In my different emails I may get a maximum (depending on the day) of up to 150 emails, all of which are already loaded on my computer (I end up deleting the majority of those emails), so how can I have so many emails trying to come in??
Of course, when I open my Activity Monitor, the Mail application sometimes takes up OVER 100% of the processor... making it impossible to work.
I went into my different accounts and deleted the "deleted" emails on the servers. What else can I do?
What can possibly be causing this??
I have several gmail accounts and others on specific domains (linked to websites), all imap.
Any help would be greatly appreciated!!!
macbook pro 15-inch, Early 2011,
mavericks 10.9.5
8 go ram
Mail 7.3

Yes Eric that does reset it but the numbers quickly start to climb again!!!
At first it says may 10 incoming messages (that would be about normal), but now I'm up to over 50,000 again!!!
There is some sort of duplication going on that was not happening before I upgraded to Mavericks.
I agree with you about feedback. I'm trying to send feedback everyday, until I find a solution.
This problem is keeping me from working since it is using up way too much of the CPU.
Thanks anyway.

Can't Get Monitor to Work

Recently upgraded to 2012 from 8. Cannot get Monitor to work. I can browse to the 8200 port and get a blank webpage. The individual web pages for the POA, GWIA, MTA, Webaccess and DVA all work. This is on SLES 11.1. Maybe it is not supposed to work. If that is the case the Admin Documentation is not clear, since it says somethings only work with a Windows install and implies that other components will still work with SLES. [I did initially have a problem with the DVA monitor where the IP address did not get written to the config file, so something along the same lines may have gone wrong on install.] Thanks.

Here is a little more detail, although as mentioned, if I attempt to reinstall, I get a report that the rpm items are installed already:
rpm -qip novell*.rpm
Name : novell-groupwise-gwmon Relocations: /opt
Version : 12.0.0 Vendor: Novell, Inc.
Release : 98586 Build Date: Tue 17 Jan 2012 04:44:51 AM CST
Install Date: (not installed) Build Host: GW-Asc-LX.provo.novell.com
Group : Applications/Communications Source RPM: novell-groupwise-gwmon-12.0.0-98586.src.rpm
Size : 44534456 License: 1993-2008 Novell, Inc.
Signature : (none)
URL : NOVELL Worldwide
Summary : Novell GroupWise Monitor Agent
Name : novell-groupwise-monitor Relocations: /opt /var/opt /etc/opt
Version : 12.0.0 Vendor: Novell, Inc.
Release : 98586 Build Date: Tue 17 Jan 2012 04:45:03 AM CST
Install Date: (not installed) Build Host: GW-Asc-LX.provo.novell.com
Group : Applications/Communications Source RPM: novell-groupwise-monitor-12.0.0-98586.src.rpm
Size : 1790267 License: 1993-2008 Novell, Inc.
Signature : (none)
URL : NOVELL Worldwide
Summary : Novell GroupWise Monitor

Mail-to-Mail scenario - Problem with comm. channel not reading message

Good day,
I am setting up a Mail-to-Mail scenario, where a received e-mail with an attachment is both processed into a file, as well as a monitoring e-mail needs to be send. The attachment processing is an existing process and is still working properly, but my e-mail isn't send. I am using Java mapping to create the destination e-mail based on the source e-mail. Everything is set up in the Directory as well, and through the Test Configuration feature I have tested my new addition to the existing process, I am seeing the result that I am expecting. I have sent a test message and XI picks it up just fine and processes it which is tested by both SXMB_MONI and the resulting file from the attachment.
However, the monitoring e-mail is not sent. Using the runtime workbench, there is an error in the receiver communication channel, being the following error from the Audit Log:
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.messaging.util.XMLScanException: java.lang.NullPointerException; nested exception caused by: java.io.IOException: Parsing an empty source. Root element expected!
Looking through the Message Content, I notice there is a SOAP document describing the source message and two payloads. The first payload being the source message in XML format, the second payload is entirely empty. I suspect this empty second payload is causing the NullPointerException, but I am at a loss as to why the payload is empty. The Test Configuration showed me that the message gets through just fine, so what is going wrong?
Here is a link to the configuration of the communication channel, maybe something is wrong here: [Config of communication channel|http://roald.hoolwerf.net/images/cc-config.png]
My question is: What can I do to find what is causing the communication channel to receive an empty payload, and how can I solve this?
Searching for this issue, or the given error on both Google as these forums hasn't given any related posts, if I did miss them in that case I am sorry for posting and please refer to the related topics.
Thank you in advance for taking time to look at this question.
Kind regards,
Roald Hoolwerf
Edited by: Roald Hoolwerf on Feb 1, 2010 3:57 PM

Try this.
Unchecked the configure use authentication.
and use mail package (base64)

Mail message gets garbled... but only when sent with attachment to Android?

I'm getting heat from my employer because I use a Mac and he doesn't (I use an iPhone and he uses an Android, see the consistency??). Regardless. When I send an email with windows-friendly attachment, he receives it fine on his PC, but on his Android, the message is garbled (attachment fine). If I log in via Safari to DeskPilot (our corporate email client) and send the same message and attachment, all is fine. Oh, and if we really want to get odd, a co-worker does the same thing and his message comes though empty, not garbled.
Ideas, thoughts? This is causing a major migraine for me.
Thanks very much!

Perhaps I should have been a little bit clearer why I want to be able to send mail via my local mail/postfix system: I have several servers set up on my iMac, in particular:
    apache
    trac
I want these servers to be able to send mail to, e.g.,
    webmaster@localhost
    root@localhost
    trac@localhost
I have created aliases for these addresses in:
    /etc/postfix/aliases
(I have also executed "newaliases"). These aliases all point to my own user account on the same machine (my iMac).
Finally, I have a .forward file at the root level of my OS X account that forwards all local Unix mail to my normal e-mail account handled by my ISP.
This way, all local mail sent to "webmaster2, "root", "trac", etc., should be sent to my normal e-mail address that I monitor with Mail.app.
*This all worked perfectly with Mac OS X 10.4.x,* so I know it should be possible. However, I have only now just tried to set this up 10.5.x (Leopard) and, clearly, I am having problems.
Perhaps this motivation for wanting to send e-mail via the Unix mail system will help others understand my situation, and I hope someone can point me in the right direction. Thanks very much in advance.

Mail adaptor throws error

Hi,
My scenario is file to mail.
Adaptor Monitor of Mail adaptor throws the follwoing error.
"error occured: [2005-05-05T11:42:54Z] unable to call the mailer; com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: com.sap.aii.messaging.srt.BubbleException: Unsupported protocol for XMBMailCallerService: http [null "null"]"
What could be the solution for this?
Thanks in Advance,
Prasad U

hi all,
The issue has now been resolved.
We have a few more queries....
1. How can we attach two (or more) files. (In case of Message protocol=XIALL we do get two attachments but one is system details and the next is the whole file from sender. The system details in the first atachment includes the details of the agreements and determinations).
2. How can we change the type of the attachment? eg. instead of xml or txt can we have an .doc or .csv.
3. How can we give content and attachments in a single go?
and finally
4. How can we change the name of the attachment? ie by default it generates a paylod-xxxxxxxxxxxxx. can we rename it to our requirement?
Regards,
Shabarish & Prasad

Monitoring e-mails in GroupWise 7.0

Similar Messages

Maybe you are looking for