Monitoring effects in audio recording via Apogee Duet

I had to delete Logic preferences to connect Logic Remote. As a result I have lost effects in headphones out of Apogee Duet Firewire. I can only monitor clean. Is there an obvious fix? (Logic x , Yosemite, Apogee Duet 2 firewire)

It was a Bus (and human) error in Logic Mixer. Sorted, Thanks.

Similar Messages

No Audio Input Using Apogee Duet

Not getting any audio into GarageBand using Apogee Duet.
Getting output through the Duet fine, but input (guitars) not working.
Read through prior postings and already:
- Set input/output in Sound prefs to Duet
- Set input/output in GarageBand prefs (Audio/MIDI) to Duet
- Set input source in GarageBand to Duet
- Set Monitor to On
Any thoughts?
Thanks.

Yes and yes. Simply no audio in. It's got to be some minor configuration issue, as (a) i can get audio out from the computer through the Duet, and (b) Apogee's Maestro app recognizes the Duet. I'm going to call Apogee customer service tomorrow to have them walk me through configuration.

Line-level audio recording via headset jack

I'm interested in using my Touch to run the "FourTrack" app - but want to record line-level rather than via a mic. (I'm not very technically minded.)
Is there any reason that I can't use an "iPOD VIDEO / HIFI CABLE, 3.5mm RCA to AUDIO VIDEO AV TV Cable for IPOD Video Photo Nano Mini" (as it is described on Amazon) and use the video RCA plug (the yellow one) for my audio in.
(I guess that the touch expects a mic-level input, rather than line-level. I'll be getting a DI Box if that assumption is correct.)

Hi PeterPa,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
You could also try clearing the Smart Connect application to see if this app based,
Menu > Settings > Apps > All > Smart Connect > Clear Data
let us know how you get on.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Can't hear myself record with Apogee Duet in Logic

i have input monitoring on but don't hear anything through my mic. I'm getting signal but i can't hear myself through the headphones. am i missing something?

Have you checked in the maestro software (mixer) that you have turned up the fader on the channel you wish to monitor on, and that the monitoring fader in Maestro is not set to 'none' (sorry, don't have maestro here to check), Also check you do not have the headphone output set to mute in Maestro.

How do I record audio using Virus TI and Apogee Duet? What is the best set up?

I am running Logic 9 with Virus TI Snow and an Apogee Duet. I have been using the Virus sound card to bounce virus sounds to audio on logic 9 but want to record the audio through the apogee sound card. How do I do this? I have tried but cant seem to monitor the sound. What is the best setup?
Also does anyone know if it will make much difference in sound quality using the Apogee sound card as opposed to the Virus?

Hi,
I'm doing this from memory, as I'm not in front of my Mac right now.. but... The Apogee installer should have installed an "apogee" control panel app on your computer. [maybe re-install?].
In Logic's Menu, go to > Options> Open Apogee Control Panel, to open it [if it's properly installed...]
When you launch that app, it has an option on one of the screens to "monitor" your inputs and adjust levels in and out of logic and, bypass the latency that causes a recording delay when doing live vocals, etc.. You can find that how to do that if you get stuck, via goggle or on the Apogee site.
As far as which sound card option is better [Virus or Apogee] DEFINITELY Apogee. Apogee is "studio standard" for high quality sound in major digital studios world wide. I'm not saying the virus is bad, but Apogee is amazing.
I went back to my old recordings and mixes I did without the Apogee and was shocked at what I did NOT hear !
Definitely Apogee !
I have a Virus TI. When you run it as a plug-in in Logic, I believe you should be able to select and simply "render the track as audio" or "mix the solo track to disc and re-import it, directly bypassing any interface by going directly to disc [via the usb cable] for the highest quality sound. Again probably Google, YouTube [tutorial videos] or the Virus site has info or downloadable manuals or Logic tutorials..
Hope this helps !
-Man Parrish
Message was edited by: ManParrish

After using apogee duet, mac's built in mic & logic's track headers for recording are not working properly. How do I fix it?

I use logic 9
After using apogee duet for mac, I was away from my home studio without the duet and wanted to record vocals via the internal microphone on my mac book pro. (Obviously, I know it wouldn’t be the same quality. I wanted to do it as a draft, because I had a melody in my head and wanted to record it so I could remember it later.)
After opening up a project I was unable to record audio. I noticed the track headers had changed. Sometimes the “record ready” button was missing. But whether it was there or wasn’t, the same thing kept happening… After pressing the “record button” or the “record ready” button a window would pop up that said, “No input source selected!” I tried to trouble shoot by configuring track header and by going to prefereces>audio>devices>core audio, and switched the “input device” to “built in microphone,” and things like that, but I still would get the same pop up window indicating “no input source selected.” To be thorough, in preferences under “core audio,” I have selected universal track mode, 24 bit recording, and software monitoring.
Do I need to reset something?
If your recommendations help fix the immediate issue temporarily, how do I keep it from reverting back to the same problem if I feel like switching between the duet interface and the built in mic in the future? How do I keep it permanently from this malfunction? It seems like this is something simple that would be addressed.
Also, as I was trying to think of anything it could possibly be. I wonder if it could be the driver I installed for an old m-box2 possibly causing an issue. After getting my new mac book pro, I downloaded a driver for m-box2 (the second generation that came out in 2005 and used pro tools LE.) I used the m-box on my previous computer and it worked well. Since I purchased a new macbook, I tried to use it on my new computer, but since the m-box2 is a 32 bit system, it didn’t work very well, which is why I got the duet. I don’t know if that could possibly be messing anything up. If so, should I uninstall it somehow?
Thanks

Ok, think this through... you've changed from a stereo source to a mono source.
The message reads: “No input source selected!”
On the track you're trying to record there is an Input section directly underneath the I/O label. Click and hold to select the correct Input for that track.
Also, the project you opened was saved with the Duet's driver/interface parameters.. if you open the same project without the audio interface Logic will do it's best to pick I/O that's compatible but I've never seen any DAW do this perfectly.. it always takes a small amount of user input. Especially since you've changed from the Apogee to the internal mic.

LPX apogee duet interface I/O but I get only the dry signal back to monitor

I use an apogee duet as I/O interface, the input channels all ok but I get only a dry signal back to the monitors. What I have to do for right routing the wet signals to my monitor? Duet is input and output (speaker) in the mac system and Logic Pro X, core audio is active.

I Assume you mean when you are recording. You have to turn software monitoring on in the audio preferences or you can right click in the transport bar and check off thr box on the right hand side that says software monitoring. That will give you reverb or whatever on the recording channel for listening but it wont print the effect. It is just for listening

FW problem with Apogee Duet, Yamaha monitors, and external FW800 HD...

Recently purchased an Apogee Duet and Logic Express 8. Love it so far but there's a cracking noise coming out of the Yamaha monitors when I turn on the external HD via FW800. The Duet is connected via FW400.
It'll be nice to solve this issue. The digital/cracking noise is annoying. It's almost unworkable. Additionally, I use the external FW800 as my recording drive so it's crucial. I guess the FW bus is overloaded. Is an express/34 card the only option? If so, any recommendations.
Besides this, the Duet sounds awesome w/out the FW800 HD plugged in.
Thanks, mT.

I'm having the same issue -- lots of crackly digital noise coming through my studio monitors (but not through the headphones). The noise, I find, is particularly loud when the 48v is on. Is that the case with you? I initially discovered the issue while trying to record with an AKG C 451 B condenser. When the mic was getting phantom via the Duet, I was getting digital crackling. However, when I put a preamp between the condenser and the Duet (in this case a UA Solo/610) and had the preamp supply the 48v, the crackling was gone. So: is this an issue with the FW or an issue with the Duet's phantom power?
(I'm using the Duet with Logic Pro 8)

Best way to disconnect firewire audio interface (power down apogee duet)

This may seem like a really naive question, but I am brand new to firewire as well as Macs, so forgive me.
It doesn't seem healthy to just leave my Apogee Duet powered via the firewire connection when I'm not using it for a length of time (ie - doing graphics rather than music). With any and all software that had been using it closed down, and my system prefs for audio back to non-duet input/output for audio, can the firewire cable to it just be disconnected, cutting power to it? Or should I power down the computer, then disconnect, and power back up?
Uh, and I guess I'm posting this question here because it seems more likely for there to be a number of Duet and/or audio firewire interface people here...
Thanks,
Apple

hi,
you can leave it active.
won't damage anything.
in fact, it might stop damage.
only thing i find is, if i switch the mac off totally, i get a ground loop (or lack of)occurring to my pwr amp/monitors.
you could yank the FW cable but it'll produce the loop (hum).
if your are using small; speakers, you might not hear this, because it's low, but it's still there.
DR9.

Apogee Duet/ Logic 8 - Lose Right Channel Sound When Recording

Hi all. Using Logic Pro 8.0 on an Intel iMac, OS 10.11, with 2 Seagate Ext. FW Drives with an Apogee Duet.
Here's the problem that's recently developed and reoccurring more frequently when recording into Logic:
I plug guitar or a mic into channel 1 of the Duet ( have double checked everything connection-wise - all good)
I hear the signal from the input in both ears... everything fine so far.
I record or rehearse and all is well.
I stop the playback and then I only hear/monitor my current instrument or mic in one ear (usually the left - the right channel disappears. This has nothing to do with the headphone or speaker connections as all pre-recorded tracks are still coming out in stereo (both ears).
Sometimes if I just press play and stop, the missing side will reappear, but not always.
If I was just recording into channel 1 of the Duet and I encounter the problem, I physically unplug the source and put it into channel 2 and re-arm the input and/or the record and then I have 2 sides again... strange.
As well, when I use a Logic session template under this same setup, I can hear my guitar in both ears , but the moment I mute an effect in the channel strip I'm playing through... boom.... one ear/side is gone. I can only get it back by unmuting the effect or going through the above mentioned unplugging routine.
To sum up, I should be able to simply monitor my guitar or mic input in both ears (stereo) without it disappearing randomly. I know a guitar/mic is mono but you should be able to have it coming out both sides. It always worked until the Duet started acting up.
Lately, I also have been hearing strange artifacts and phasing when monitoring a LIVE source back through the Duet... this is intermittent but becoming more frequent. Previously recorded tracks are sounding ok.
Any tips or similar experiences? I'll give Apogee a buzz and see what they can offer.
Thanks all.
Dave

Hi,
Thanks for offering your tip... much appreciated. When setting Mono versus Stereo, are you referring to the little "circle" icons at the bottom of the channel strip, next to the "I" (input monitoring)?
I did have it set to mono, with a single meter in the mixer window channel strip and still had the right channel disappearing suddenly problem. Speaking of the mono/stereo circle icons, why is it that some channel strips show these icons but others don't? I have two guitar tracks that both play back fine, but one allows access to the mono/stereo select icon but the other doesn't display it. They're both identical in every other way.
My feeling is that this could be a Duet problem because of the thin phasey ring modulation sound and level changes that will appear suddenly while monitoring a clean input source moments after everything was just fine.
Maybe this is because I'm still on 8.0 and Tiger? I'm in the middle of a project and can't risk update problems right now. What do think about the latest Logic with Leopard....safe to do and still have access to previous Logic 8.0 session files?
Thanks for your kind advice!
Cheers,
Dave

What connectors do I need for my ipad so I can connect it to my apogee duet 2 interface essentially using the ipad as an instrument utilizing a few of the synth and drum machine apps to record tracks into Logic on my Mac?

Ok, so I completely feel like this is a stupid question for those of you already in the know and recording tracks onto your Computers DAW from instrument apps on the iPad and other i devices. I can not seem to find out exactly what connector or unit I need to be able to connect and use my ipad as a instrument to record tracks onto logic. I have an ipad2 that I want to connect to my apogee duet 2 interface which is obviously connected to my Mac. I know Logic comes with plenty of drum and synth options but I still want to be able to use beatmaker, jam up pro and the sunrizer synth apps on some of my tracks. I do have the camera conversion adaptors. So my question is, do I just run from the camera adapter in the ipad into the midi port on my apogee interface? (I'm new to and still learning about midi) Or is there a special 30 pin cable I need to get that runs from the ipad into the XLR or quarter inch in the break out cables on the apogee? I did find one cord out there that plugged into the ipad and had left and right XLR connectors but my duets break out cable only has two inputs each is their own channel. Also , if the cable I need isn't midi and does connect to the breakout cables, do I set it as an instrument or as a mic in the apogee software? Or am I completely way off base and needing something different all together. Any help would be much appreciated!
I have a fare amount of experience when it comes to recording, set up and the flow of standard instruments, using external hardware and plugins. But the last few weeks I spent a lot of time programming some great beats in beatmaker on my ipad and I want to track them into Logic. It seemed like no matter how I worded the questions when researching what I thought was and should be simple to figure it out, it just took me to answers I wasn't looking for. Thank you ahead of time. Like I said I'm just starting to get out of my comfort zone and learn about midi and the more digital side of things. So sorry about any ignorance concerning that side of things.

The new Apogee Duet for iPad and Mac, is compaible with iOS devices and includes a USB Midi input. This sounds like the perfect solution for your workflow.

Apogee Duet FireWire skipping/stuttering audio

I've bought Apogee Duet FireWire back in 2011 when I had another macbook pro and I believe it was OS X Lion powered. The problem started since I updated to Mountain Lion and next upgrades were the same. There was a time when it was not very clean if the drivers at the official apogee's site are fresh enough. But now I have OS X Yosemite and fresh drivers that claim to be for this system. As to hardware, since Apogee had only FW400 wire, later I bought FW800 wire, and then FW800<->ThunderBolt adapter. So now I use this connection: Duet -> FW400/FW800 wire -> FW800/ThunderBolt adaptor -> MacBook Pro. The audio is working normal in 80% of time, but otherwise there are stutterings of the sound. Is there a way to get rid of this problem? Thank you.
Problem description:
Apogee Duet FireWire skipping/stuttering audio
EtreCheck version: 2.1.8 (121)
Report generated 9 Apr 2015 16:22:01 GMT+3
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (Retina, 15-inch, Late 2013) (Technical Specifications)
    MacBook Pro - model: MacBookPro11,3
    1 2.3 GHz Intel Core i7 CPU: 4-core
    16 GB RAM Not upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n/ac
    Battery Health: Normal - Cycle count 106
Video Information: ℹ️
    Intel Iris Pro
    NVIDIA GeForce GT 750M - VRAM: 2048 MB
        Color LCD spdisplays_2880x1800Retina
        2757 spdisplays_1080p
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:58:24
Disk Information: ℹ️
    APPLE SSD SM0512F disk0 : (500,28 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / [Startup]: 499.07 GB (6.42 GB free) (Low!)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Wacom Co.,Ltd. Intuos5 touch S
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
Firewire Information: ℹ️
    Apogee Electronics Duet 400mbit - 400mbit max
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
        Apple Inc. Thunderbolt to FireWire Adapter
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Anywhere
Kernel Extensions: ℹ️
        /Applications/DAEMON Tools Lite.app
    [not loaded]    com.disc-soft.DAEMONTools.VirtualSCSIBus (1.0.2 - SDK 10.8) [Click for support]
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hidhook (9.0 24172.951362) [Click for support]
    [not loaded]    com.parallels.kext.hypervisor (9.0 24172.951362) [Click for support]
    [not loaded]    com.parallels.kext.netbridge (9.0 24172.951362) [Click for support]
    [not loaded]    com.parallels.kext.usbconnect (9.0 24172.951362) [Click for support]
    [not loaded]    com.parallels.kext.vnic (9.0 24172.951362) [Click for support]
        /Library/Extensions
    [loaded]    at.obdev.nke.LittleSnitch (4234 - SDK 10.8) [Click for support]
    [loaded]    com.Apogee.driver.DuetFWOverideDriver (1.4.4 - SDK 10.9) [Click for support]
    [not loaded]    com.wacom.kext.ftdi (1 - SDK 10.10) [Click for support]
        /Library/Extensions/HuaweiDataCardDriver_10_9.kext/Contents/PlugIns
    [not loaded]    com.MBB.driver.MBBACMData (5.01.03 - SDK 10.8) [Click for support]
    [not loaded]    com.MBB.driver.MBBActivateDriver (5.01.03 - SDK 10.8) [Click for support]
    [not loaded]    com.MBB.driver.MBBEthernetData (5.01.03 - SDK 10.8) [Click for support]
        /System/Library/Extensions
    [loaded]    com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
    [not loaded]    com.Megafon1KY.driver.YotaDevices (1.0.3) [Click for support]
    [not loaded]    com.Quanta.driver.QuantaDriver (1.0.3) [Click for support]
    [not loaded]    com.Yota1KY.driver.YotaDevices (1.0.3) [Click for support]
    [not loaded]    com.anydata.driver.AnydataUSBCDC (4.0.2) [Click for support]
    [not loaded]    com.anydata.driver.AnydataUSBCDCACMData (4.0.2) [Click for support]
    [not loaded]    com.wacom.kext.wacomtablet (6.3.11 - SDK 10.9) [Click for support]
    [not loaded]    com.wetelecom.driver.WeModem (1) [Click for support]
    [not loaded]    net.code4mac.driver.C4MUSBCDC (4.0.2) [Click for support]
    [not loaded]    net.code4mac.driver.C4MUSBCDCACMData (4.0.2) [Click for support]
Startup Items: ℹ️
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [running]    at.obdev.LittleSnitchUIAgent.plist [Click for support]
    [running]    com.ApogeePopup.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.huawei.mbbservice.plist [Click for support]
    [loaded]    com.roox.YotaAccess.Agent.CheckTrash.plist [Click for support]
    [loaded]    com.roox.YotaAccess.Agent.plist [Click for support]
    [running]    com.wacom.wacomtablet.plist [Click for support]
    [running]    HWPortCfg.plist [Click for support]
Launch Daemons: ℹ️
    [running]    at.obdev.littlesnitchd.plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.aladdin.aksusbd.plist [Click for support]
    [running]    com.aladdin.hasplmd.plist [Click for support]
    [running]    com.DuetDaemon.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.lsreset.plist [Click for support]
    [running]    com.roox.YotaAccess.Service.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.bittorrent.uTorrent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Cannot contact Adobe
    AdobePDFViewer: Version: 10.1.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
    Open in Internet Explorer
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    WacomTablet [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         6%    WindowServer
         5%    coreaudiod
         2%    studioapp
         1%    Little Snitch Agent
         1%    Google Chrome
Top Processes by Memory: ℹ️
    292 MB    Google Chrome
    258 MB    Skype
    206 MB    studioapp
    172 MB    mds_stores
    137 MB    WindowServer
Virtual Memory Information: ℹ️
    10.31 GB    Free RAM
    4.47 GB    Active RAM
    1.06 GB    Inactive RAM
    1.32 GB    Wired RAM
    2.23 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Apr 9, 2015, 03:23:29 PM    /Library/Logs/DiagnosticReports/WacomTabletDriver_2015-04-09-152329_[redacted]. crash
    Apr 9, 2015, 03:23:19 PM    Self test - passed
    Apr 8, 2015, 11:20:34 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Adobe Photoshop CS6_2015-04-08-232034_[redacted].crash
    Apr 7, 2015, 04:24:04 PM    /Library/Logs/DiagnosticReports/Adobe Illustrator_2015-04-07-162404_[redacted].hang
    Apr 7, 2015, 04:19:53 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/QuickLookSatellite_2015-04-07- 161953_[redacted].crash
    Apr 7, 2015, 04:19:38 PM    /Library/Logs/DiagnosticReports/WacomTabletDriver_2015-04-07-161938_[redacted]. crash
    Apr 7, 2015, 04:13:24 PM    /Library/Logs/DiagnosticReports/Skype_2015-04-07-161324_[redacted].hang

I just started having problems with my Duet this afternoon and found this thread so I thought I'd give a shout out to you guys to see if you have any ideas before talking with the company....
I've had my Apogee Duet since about feb and never had any problems until this afternoon. For some reason the Duet doesn't seem to want to interface with my computer at all anymore. When plugged in, the lights light up on the Duet however under system profiler I get the "unable to list firewire devices" error msg. Under the Sound tab in preferences, the Duet is not listed as an available I/O. In the Apple Midi Setup or whatever it's called in utilities, the icon for the Duet is still there but it doesn't show it as online. I can still press the big button and the little green light cycles through input 1/input 2 yada yada yada, but the computer doesn't seem to see it. When I open up Maestro, both the control and mixer screens are completely blank. I've tried resetting the unit (holding button down for 5 seconds), using different firewire cords, and finally uninstalling and reinstalling the Maestro software (using the Duet software - May 2008 link on apogees site) and none of these things solve the problem. I haven't had a chance to plug in another FW400 device into my Macbook Pro to see if it's a problem with the port, but I get the same result with the Duet on my MBP and my G5 PPC tower, which leads me to believe it's a problem with the unit. Also, since it's bus-powered, the lights wouldn't light up if the ports on the computer were fried, right?? Has this happened to anyone else?? Any ideas on how to fix it before calling up Apogee?? Any help would be greatly appreciated!

Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

You can output audio thru HDMI, with appropriate adapter.
You can use additional cheap external usb audio for monitoring.

After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet

after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga.

No audio when uploading a screen recording via quicktime on mac to youtube.

I've used screen recorder via quicktime for upload to youtube it has both visual and audio when I've viewed it but after uploading to youtube the audio is missing. I'm new to mac so a complete novice. Any help would be highly appreciated. Thanks.

Hi
This is a bit unclear to me.
No audio when recording
No Video-editing program I know off play any feedback (at standard settings) while recording. FinalCut is even worse that it doesn't play the sound while importing from Camera either (one need to connect speakers to the Camera-audio-out to get this)
So first - I'm not sure if You can get audio out while recording in iMovie at all.
BUT
If there is no sound - When Your captured video is played back - then the problem is more severe and I would start with.
• Trashing iMovie pref and cache files
and see if that helps.
Please - be more descriptive - so that one can do the same actions to see if Your problem is Yours only or if it is the same on more Macs.
Yours Bengt W

Monitoring effects in audio recording via Apogee Duet

Similar Messages

Maybe you are looking for