Monitoring EWA in solution manager for EP

Hi
How to monitor and configure the EP 7.0 on solution manager 7.0 for SP 16
Can any body give the doc and steps to do.
Regards

Hi,
Follow Guides
Setting Up your Central Monitoring [original link is broken]
Notes
987835 - How to define Solutions in SMSY for Diagnostics
976054 - Availability of EWA for Non ABAP components
Prerequisites
The SAP EarlyWatch Alert is available for:
SAP systems based on ABAP stack of SAP Netweaver or SAP WebAS
SAP R/3 (minimum release 3.1H)
The Java stack of SAP Netweaver components with a J2EE Engine 6.40 or above (requires ST-SER 700 2007 1 or above on the Solution Manager)
The main prerequisites for using SAP EarlyWatch Alert are:
A remote connection between your SAP component and your SAP Solution Manager
On a ABAP stack system implement SAP Note 69455, run report RTCCTOOL and follow instructions.
For a Java stack system or a CRM system: setup of Solution Manager Diagnostics. For Java SAP Note 976054 describes the prerequisites.
The EarlyWatch Alert content is shipped on the Solution Manager with software component ST-SER u2018SAP Solution Manager Service Toolsu2019 and on the satelite systems (ABAP) with software components ST-PI u2018SAP Solution Tools Plug-Inu2019 and ST/A-PI u2018Application Servicetoolsu2019.
Chk Pdf
https://websmp201.sap-ag.de/~sapidb/011000358700002009362008E.pdf
/people/federico.babelis2/blog/2006/04/25/system-monitoring-configuration-guide-for-dummies
Hope it solves ur problem
Regards
Prakhar

Similar Messages

  • EWA on solution manager - short dumps

    Hi there
    I've setup EWA on solution manager for Remote System BWQ, all test etc went fine, but as soon as I start service processing on solman to retrieve the data, a short dump is create as follows:
    Short text
        Syntax error in program "RDSVASAEA_ROOT_____________049 ".
    Error in the ABAP Application Program
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "RDSVASAEA_ROOT_____________049
      " in include "RDSVASAEA_ROOT_____________049 " in
    line 87:
    "INCLUDE report "/1CAGTF/IF_LOGFUNC_000393" not found."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    could anyone please assist me with this.
    Regards,
    Stephan

    Hi
    So i tried to implement the above mentioned notes, but to update the solution manager stack, i have to use maintenance optimizer to approve the stack...
    I have added solution manager 7.0 to the solution overview, and can select it from 'Plan Maintenance' window.. but as soon as i try and go to the second step, another short dump is created.
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_SOCM_NOT_IMPLEMENTED
    Date and Time          13.06.2008 09:25:45
    |Short text                                                                                |
    |    An exception occurred that was not caught.                                                    |
    |What happened?                                                                                |
    |    The exception 'CX_SOCM_NOT_IMPLEMENTED' was raised, but it was not caught                     |
    |     anywhere along                                                                               |
    |    the call hierarchy.                                                                           |
    |                                                                                |
    |    Since exceptions represent error situations and this error was not                            |
    |    adequately responded to, the running ABAP program                                             |
    |     'CL_CHM1_CHANGE_REQU_INSTANCE==CP' has to be                                                 |
    |    terminated.                                                                                |
    i then looked at Notes:
    Note 851496 - Exception: CX_SOCM_NOT_IMPLEMENTED missing implementation
    Note 849690 - BC Set Change Management
    But none of them seem relevant to our SOLMAN.

  • How to Configure Solution Manager for 1.Download SuppPacks 2. Monitoring 3

    We recently upgraded to ECC 6.0 and installed Solution Man., very vanilla.  Basically just to get the Key to do the upgrade with.
    I would really appreciate it if someone could share any documentation that would provide guidance on how to now further configure SolMan for the following
    1.  Monitor our Landscape which comprises of ABAP ECC (java is installed though not actively using), and SAP BI 7.0
    Sandbox, Dev, QAS and Prdn  for BOTH ECC & BI
    2. Download Support Patches from SAP Marketplace (currently we have had to donwload the long way with download manager creating a message to get them apporoved whew... this is work..)
    3. Add messages to SAP Market Place (thru SolMan)
    4 Possibly monitor security and manage userids etc (if possible)
    And if there is functionality that will make the BASIS experience better I would definitely appreciate it.  We don't need the help desk as we already have it ,but, we may take advantage of Project documentation
    I would really really appreciate it if someone could advise
    Kind Regards & Thank You
    Maria

    Hi Maria,
    With solution manager you can definitely do a world of things, below is a list inclusive of the features you wanted:
    1. Dowload SP-Stacks, etc - you will have to configure Maintenance Optimizer for this (MOPZ).
    2. Monitoring - you can monitor your ABAP and JAVA stacks using the monitoring features of CCMS which is embedded in Solution Manager, please have a look at the monitoring setup guide (for NW04S) in the Service Marketplace. Basically, it uses agents such as SAPCCMSR for JAVA Stacks and SAPCCM4X for ABAP stacks.
    3. You can also configure availability monitoring using th same guide as above - this uses the CCMSPING tool.
    4. You can monitor your business processes using the BPM/BPMon features of solution manager - you will also get this guide in http://service.sap.com/solutionmanager.
    5. You can scheule your earlywatch alerts (EWAs) in solution manager system - have a look at the following link for this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f35bf3-14a3-2910-abb8-89a7a294cedb
    6. You can also have DBACOCKPIT on your Solution Manager system and have it tomonitor backups, etc on your satellite systems. For thsi have a look at SAP notes 1028624, 1025707 and 1027146 (and the DBACOKPIT guide in SAP Note 1028624).
    Hope this is helpful. Kindly award points if useful.
    Thanks, Dibya

  • Solution Manager for EWA

    I already configured my EWA (SDCCN), but then I realize that EWA need Solution Manager to run.
    I need to know how to install Solution Manager for my EWA? Do I need to install in separate server? Or there are others option for me to consider?
    Pls help me to figure this out…

    Hello Hazha!
    I don't know how you can configure in SDCCN an EWA session without the Solution Manager, but if you did so, you can send your EWA data to sap, where they will be processed and where you can find them in your inbox.
    You need a well functioning SAPOSS RFC destination (TA OSS1).
    SDCCN -> Goto -> Settings -> Task Specific
    You will get a window with a tree list. Open RFC-Destinations -> Settings and click on the settings icon.
    In Dialog RFC destinations, Tab Destinations you might click on the Info-Icon (botton) and you will get documentation. Click now on the Change Icon.
    You will now get a new icon "Create destination to SAP OSS". Please use it, it should generate the destination SDCC_OSS.
    Please test the destination.
    Now you can insert this RFC-destination into the task attributes of your EWA-Session, system-id should be O01.
    Bye
    PS.
    You might also have a look at the documentation at http://service.sap.com/ewa -> Media Library
    Message was edited by: Riccardo Escher

  • Questions on "FAQ - SAP Solution Manager for VARs"

    Hi,
    I just got through the FAQ - SAP Solution Manager for VARs, but have some further questions:
    For me it is not quite clear which connections are necessary for which VAR scenrio.. currently we have setup the service desk in our solman. Customer's aren't linked to the solman yet - we have saprouter-saprouter connections. Connecting them via SAP support backbone is an interesting option, especially for incident management. To get this working we should follow note 1124718 right?
    But what about the other scenarios like maintenance optimizer and ewa monitoring? I guess for that we definitly need to build up RFC connections to each relevant customer system (~300+x)?! I think it will be hard to handle so many connections - just consider if a customer is cancalling the maintenance contract, everything needs to be removed again... best would be to have a central communication point...
    For MOPZ we need up-to-date system information. So everyone is talking about SLD. Do you also recommend this option? There we need again a connection (direct to SolMan SLD or via external SLD on customer side).
    According to the FAQ there is a workaround for ewa monitoring for customers with security doubts.. is this also working for non-ABAP components? We need SMD and WI for generating ewas for JAVA systems...
    With regards to Enterprise Support contract: ewa only need to be monitored for productive systems? Can a customer be charged if they want to have ewas monitored for other sytems too? How long do we need to keep the ewas (1 month, 3 months, half year) before they are deleted? Are there any specific requirements?
    All the work to get these scenarios working.. is this covered within the Enterprise Support contract? Can the customer be charged for work thats done by the VAR in their system (e.g. RFC connections, SDCCN, SLD,...)?
    Sorry for this long text.. hope you have some helpful ideas!
    Regards,
    Richard

    Hello Richard,
    (1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information. 
    (2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
    (3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
    (4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
    Kind regards
    Heinrich

  • FAQ - SAP Solution Manager for VARs

    You can find further technical questions around configuration & functionalities in a comprehensive
    FAQ to SAP Solution Manager for VARs.
    This FAQ covers questions and answers around:
        > SAP Solution Manager, enterprise edition
        > SAP Solution Manager VAR setup: configuration of Service Desk
        > Work Center Service Desk: functions & configuration
        > Work Center System Monitoring: setup of SAP EarlyWatch Alert
    You can access the FAQ directly thru the following link [FAQ - SAP Solution Manager for VARs|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000490172009E].
    Navigation path: SAP Service Marketplace > SAP Support Portal > SAP Support Infrastructure > SAP Solution Manager > SAP Solution Manager for Partners > Information for Service Provider > Training and HowTo Documents > Administrator
    Please notice: The FAQ will be updated from time to time.
    Edited by: Susanne Schlehf on May 4, 2009 2:48 PM
    Edited by: Susanne Schlehf on May 18, 2009 12:56 PM

    Hello Richard,
    (1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information. 
    (2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
    (3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
    (4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
    Kind regards
    Heinrich

  • Regading PI monitoring setup in solution manager

    Hi Folks,
    I am new to solution manager and I need to setup PI monitoring setup in solution manager...
    I read some blogs and docs but not getting clear idea.   all the remaning setup has been done in solution manager and only need to configure the technical monitoring thing in solution manager...
    Please help me on this step by step guide...
    Thanks,
    Sreenivas

    Hi Hareesh,
    Thanks for your reply.
    In Solution manager if I opend the technical monitoring I am getting below screen..
    Can you please tell me what are the steps I need to do... For first i want to test this with one file communication channel later I will do remaining channels.
    I am new to this setup.. help me on this..
    Thanks,
    Sreenivas

  • Communication Channel Monitoring using CCMS/Solution manager

    Hi ,
            I have configured everything in solution manager for message monitoirng of PI system, but my requirement is to monitor communication channel error in ccms.
    Is there any possibilty to trigger alerts for communication channel errors ??
    Regards
    Veeramalla

    Hi,
    Please refer following threads
    SAP Solution Manager and PI
    In addition you can refer solution manager wiki:
    http://wiki.sdn.sap.com/wiki/display/SM/WeblogsrelatedtoSolutionManager
    Regards,
    Deepak
    Edited by: Deepak  Shah on Feb 23, 2011 11:15 AM

  • Preparing Solution Manager for SMD Agents Installation

    Hello everyone
    I have to configure the Solution Manager of QAS to receive new SMD Agents, I looking at the transaction SOLMAN_SETUP.
    Does anybdoy know what do I have to do to prepare the environment for the installation of SMD agents?
    Thank

    Hi Marcelo,
    Check note 1365123 - Installation of Diagnostics Agents, this note shows the agent installation strategy. You must install one SMD agent per host (physical or virtual) . The SMD agent should be installed in all host you want to monitor.
    In order to connect the SMD agent into your Solution check the following WIKI:
    http://wiki.sdn.sap.com/wiki/display/SMSETUP/Diagnostics+Agents#DiagnosticsAgents-Connectionoptions
    Also, you can managed the SMD agent in the "Agent Administration", it can be found at:
    - SOLMAN_WORKCENTER
    - Tab Root Cause Analysis
    - "Agent Administration"
    I recommend you to use the "Direct connection to solution manager" for your agents. It is easier than the SLD registration.
    Regards,
    Allam

  • Need help in Solution Manager for preparing for Career in SM

    Hi Gurus,
    This is Amit Choudhary here,i am in SAP BW and and new to SM,so wants to work in Solution manager as i got chance to work with EWA reports and found this is quite interesting so, is there any one can help me in learning more about SM so that i can get onto right track.
    Waiting for the feedback on this.
    Looking forward for ur valuable inputs and help.
    Thanks in advance.
    regards
    Amit

    Hi Amit,
    SAP Service Support Portal provide several information on SAP Solution Manager for customers. It requires an "S-User" for access.
    <a href="http://www.service.sap.com/solutionmanager">http://www.service.sap.com/solutionmanager</a>
    Here you find official presentations, master/installation/configuration/... guides
    <a href="http://www.service.sap.com/rkt-solman">Ramp-Up Knowledge Transfer - SolMan</a>
    This section provides role-specific self-learning material.
    Best regards,
    Ruediger Stoecker

  • How to configure CTS+ for Solution Manager for XI 3.0

    Hi ,
    We are working on XI 3.0 SP 20 and Doing a file system based transport of .TPZ files. We observed that there is a possibilit of misssing the objects while tranporting. So we are planning to set CTS+ with our Solution Manager.
    Question:
    1. Can we configure CTS+ through the latest version of Solution Manager for XI 3.0 landscape?
    If Yes .. How?   If No... Why?
    2. Is there any way to make the the transport automated like ABAP tranports.
    If there is.... Please send the link or documents..
    Thanks
    Manoj

    Hi Venkat,
    Thank you for the Demo. The Demo gives me information about the CTS+ setup. I am looking for the compatability of CTS+ for XI 3.0.
    We have Solution Manager 7.1 setup in place.
    Please let us know if we can setup CTS+ on solution Manager (7.01 EHP1) and use it to transport XI 3.0 SP20 IR/ID objects  across  the XI landscape.
    Regards,
    Manoj

  • One Solution Manager for different customers

    Hi Guys!!
    I am configuring a Solution Manager for different customers wich have a different S-users and different users to manage the solution manager system.
    My problem is that there is only one SAP-OSS RFC destination where I can fill the data only for one of the S-users. From "solution_manager" transaction you can indicate the S-user too (Edit - Global Settings) but the same problem occurs, I can fill the gap only with one S-user and I have to change this one when I want to work with different S-user.
    Can i configure the system to indicate different S-users depens on the user who I use to logon to solution manager system?
    Thank you very much in advanced,
    Edorta.

    Hi Edorta,
    you did not mention, which scenarios do you plan to use.
    Functionality to use the SolMan for many customer numbers is already available or will be added in future Support Package Stacks.
    It has been already added for
    - Maintenance Optimizer
    Note 1021275 - Maintenance Optimizer: RFC Destinations for Partners
    - Forwarding SAP Messages (with different S-Users resp. customers)
    IMG: Solution Manager -> Scenario-Specific Settings -> Service Desk -> Value Added Reseller
    Check for SAP Notes on component SV-SMG* with key word "VAR" (as Valued Added Reseller), "Service Provider"
    Best regards,
    Ruediger Stoecker
    SAP Notes added
    Message was edited by: Ruediger Stoecker

  • Question about setup ewa in solution manager 4.0

    Hi
    I tried to setup ewa in solution manager 4.0, but when I clicked on the "setup EarlyWatch alert", it told me that:
    the Service is not available, Fehlercode:ICF-NF-http-c:000-u:SAPSYS-l:D-i:saptux04_SM4_04-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    any one can help me?
    best regards

    Hello,
    You will have to activate the service first in transaction SICF.
    SAP recommends to do so via the the SAP Solution Manager IMG following the respective IMG path:
    <i>SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Confiugration -> Basic Settings -> Standard Configuration of Basis Settings -> Solution Manager -> Activate Solution Manager Services</i>
    Enhanced configuration of SAP EarlyWatch Alert (Service: /sap/bc/webdynpro/sap/dswp_rating_4_monitoring)
    This application is fairly new and contained in SAP Solution Manager 4.0 SP12 onwards. Information on the respective functionality can be found right here in the SAP Solution Manager SP News:
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000478802007E
    I hope this helps to solve your issue.
    Regards,
    Doreen

  • Solution Monitoring configuration with solution manager 4.0

    Hi Friends,
    I have to the Solution Monitoring configuration with solution manager 4.0.
    Please provide steps or screen shot if any body having that.

    Hi,
    Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
    This will solve your problem.
    Feel free to revert back.
    --Ragu
    Message was edited by:
            Raguraman C

  • Is it a must to use Solution manager for ECC 6.0 upgrade

    Is it a must to use Solution Manager for ECC 6.0 (FICO & HR) upgrade? I am told Solution Manager is required only if it has ABAP and JAVA stacks, or involves Enhancement Packages; and could be optional if it is only ECC 6.0 with ABAP stacks.

    Hi,
    I'm having a difficult time finding some guidance for setting up our R/3 Enterprise system in solman properly, so that I can create the upgrade XML file required to go directly to ERP 6.0 EHP4. 
    I've set up the R/3 system fine, but when i create a maintenance transaction i cannot for the life of me figure out how to tell it I want to go from r/3 to ERP6 ehp4.
    Any docs out there for this?
    Thanks!
    I figured it out... i had to add the R/3 Enterprise logical components to my system landscape.  After that I was able to select R/3 as the initial data in the maintenance transaction and then the system i wanted to upgrade, and then the option to upgrade.
    Never mind!
    Edited by: Tom Janes on Sep 9, 2009 12:52 AM

Maybe you are looking for