Monitoring Hardware Status HP ESXi with HP SIM, Get information by SNMP

Hi.
Check out to tring this steps http://h30507.www3.hp.com/t5/Technical-Support-Services-Blog/6-Simple-Steps-to-Monitoring-ESXi-with-...
It's ok, I having health hardware  status for the server in the HP SIM 7.3 by wbem with Custom HP Image ESXi 5.5 onboard by wbem .
Did any solution to get health status from hp server ESXi or from HP SIM 7.3 by SNMP to another monitoring software?

Have now solved it myself:
1) Create system restore point
2) Uninstall mobile broadband driver and centrino ultimate-N in device manager, but keep files
3) Reboot
4) Lenovo access connections automatically connects to mobile broadband. It's then just a matter of going in there and connecting to wifi also.
Everything is working beautifully now, and switching between wifi and mobile automatically. I think it was just corrupted TCP/IP settings in one or both adaptors.
X230, Core i7, 16GB memory, 512GB Samsung 830 SSD

Similar Messages

  • Monitoring hardware with SNMP

    I am performing a Systems Admin role for 30 Solaris 10 systems (consisting of 67 Solaris zones and domains) at present.
    My support team colleagues have installed Nagios (an open source SNMP based monitoring software) to enable alerting should any issues occur.
    This works fantastically for our database tables, applications, and even elements such as memory usage, CPU usage, filesystem usage, processes running etc.
    However, what this seems to lack is the ability to detect physical hardware failures.
    For example, over the past month, I have by pure chance (walking past the systems and seeing error lights, or probing the system for training purposes to the other Sys Admin in my team) discovered two hardware failures, which we are not picking up with Nagios.
    These were 1) a hard disk failure - all filesystems on this hard disk were RAID 1 metadevices, so from an filesystem / Nagios POV there was no error.
    2) A PSU failure - there is a redundant PSU in this system, so we did not lose the system, and from a functionality POV we did not have any issues.
    Each of these errors shows up in the messages files, and also in the hardware probes Sys Admins run, such as prtdiag, or cfgadm for the disk, but Nagios failed to detect them.
    So - my question is around whether it is possible to use snmp to query the hardware status on a Solaris 10 system?
    I know SunMC is a monitoring suite which uses SNMP tables to query usage and hardware, so know it should be possible - I am just unable to figure out which tables to query, etc.
    Help, please!

    What we're doing is writing a custom nagios module to scan /var/adm/messages and watch for problems. The hard bit it tuning it so it alerts for real problems and ignores the dross.

  • Monitoring CAN hardware status.

    I am trying to display the status of each CAN (network and frame) object that I have configured in a C++ application. We are required to support both Series 1 and Series 2 cards.
    I tried to extract the status from the NC_ATTR_STATE attribute. It displays the correct state most of the time. Unfortunately, the returned state does not seem to be returning consistent values. I have two CAN channels connected with terminating resistors. I start transmitting on both channels. I disconnect the cable. The state that is returned is mostly 0x20 (NC_ST_WARNING) but occasionally the state 0x02 NC_ST_WRITE_SUCCESS is returned. How can a write be successful if there is no communication?
    Is there any other way to monitor the hardware status that works on both Series 1 and Series 2 cards?
    Thanks in advance.

    Hi scottw,
    take a look a the description of the desired state: NC_ST_WRITE_SUCCESS
    "When communication starts, the NC_ST_WRITE_SUCCESS state is true by default."
    and
    "The state is set when the last frame in the write queue is transmitted successfully. The state is cleared when a write function is called."
    Thus, you could see a NC_ST_WRITE_SUCCESS state, even though there is/was no communication.
    -B2k

  • Monitoring Raid Status on SRE-910 module in 3945 router

    I'm at my wits end here.  We just recently purchased a 3945 ISR G2 router and have a SRE-910 module (with two hard drives) configured in a Raid 1.  We are running a stand-alone version of ESXi on the service module and I'm trying to figure out how to monitor the status of the Raid on the drives (along with other health issues).  SNMP has revealed nothing so far and even opening a support case for which MIB's to use has proved fruitless.  All the documents I find on monitoring the modules say to use LMS which is now Cisco Prime.  I've downloaded the trial copy, put in the SNMP settings and scanned the router.  I get device results and it shows that I have the SRE-910 module installed, but I get no other configuration / device informaiton from the module itself.
    I tried to create a new Monitoring template using the NAM health as the base template (which I'm assuming this is the correct template).  Unfortunately, when I acutally try to deploy the template against the discovered router, I get an 'Unexpected end of list' error which makes me assume I'm still doing something wrong.  I ANYONE out there monitoring the device health of their service modules in a 3945 router?  What am I missing????

    Oh, and by the way, I tried to monitor this through the ESXi host / vCenter, but even after pulling one of the hard drives from the module, neither software detected that there was an issue.  That is why I'm assuming that this will have to be monitored on the router side somehow.

  • Hello i try to use another SIM card with my iphone 4s now it said i need to unlock the phone with my Sim carrier

    Hello i try to use another SIM card with my iphone 4s now it said i need to unlock the phone with my Sim carrier ... here is what it says below
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

    So..  You need to contact the carrier for the iPhone's original sim card, and request they unlock it.  The carrier is the only one that can unlock the sim of the iPhone.

  • WLC Not Monitoring AP Status Correctly?

    My 8510 HA pair running 8.0.110.0 doesn't seem to be monitoring the AP status properly. If an AP goes down or is otherwise taken off line, the total number of AP's on the Summary page drops by 1. It should show the same number of Total APs with the number of Up units dropping by 1 and show 1 unit down. 
    Any suggestions?
    Thanks,
    Dan

    Similarly, I am working on a solution to monitor APs status through Catalyst 3850 switch, but I found the no specific traps are defined for AP status when AP goes UP/DOWN, only found the traps for ApIfUp/ApIfDown.
    The Catalyst3850 supports CISCO-LWAPP-AP-MIB, only the following traps are defined under ciscoLwappApMIBNotifs, which are:
    ciscoLwappApIfRegulatoryDomainMismatchNotif(1)
    ciscoLwappApCrash (2)
    ciscoLwappApUnsupported (3)
    ciscoLwappApAssociated (4)
    ciscoLwappApPower (5)
    ciscoLwappApRogueApDetected (6)
    ciscoLwappApRogueApCleared (7)
    ciscoLwappApWipsNotification (8)
    ciscoLwappApNoDownlinkChannelNotify (9)
    ciscoLwappApIfUpNotify (10)
    ciscoLwappApIfDownNotify (11)
    The Catalyst3850 switch also support AIRESPACE-WIRELESS-MIB, in this mib, there are two traps defined when AP goes UP/DOWN, which are:
    bsnAPUp and bsnAPDown, but their status are 'obsolete' instead of 'current', and I can't trigger these traps, the only trap I got when disconnecting an AP is the ciscoLwappApAssociated trap, and it only generated after the AP rejoined the controller again, obviously it can't be used for my requirement.
    Is there any way to monitor APs status via the switch/wireless controller in Catalyst 3850? what trap can I use?
    Thank you in advance.
    Tyler Chen

  • Can you activate an iphone with one sim, and than once it is activated use it with another sim?

    can you activate an iphone with one sim, and than once it is activated use it with another sim?

    It could be the activation server is unavailable right now, however have you or anyone else ever used that computer to jailbreak or hack another phone? That can have an affect on the hosts file. You can check this regarding information on the hosts file or security software problems.
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
    Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3014
    This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.

  • Function module to monitor Job Status (SM37)

    Is there a function module or a table that I can use to monitor JOB STATUS in BW?
    Thanks in advance!
    Cristina.

    Hi Cristina,
    they are two alike SM37 giving you back the result in a table; very powerful:
    BP_JOB_SELECT_SM37B            Select Background Requests 
    BP_JOB_SELECT_SM37C            Extended Job Selection     
    goto se37 with one of these. Testing mode: enter A for dialog mode. Perform some selections and execute.
    Check the result and how the system has populated the import parameters.
    let me know if that's what you wanted
    Olivier.
    Message was edited by:
            Olivier Cora

  • Deploying the packages of microsoft critical update but members of collection is showing unknow client tab which comes in monitoring-- deployments status windows. until deadline to be completed. Nither provide any errors or completed status, progress sta

    Hi
    I have challaged for deployment of microsoft critical patches to client machine with the help of sccm. I have been done all configuration formalities, although previous months has been deployed successfully with any difficulties.
    But This month have some issue is being running, once i was deploying the packages of microsoft critical update but members of collection is showing unknow client tab which comes in monitoring--> deployments status windows. until deadline
    to be completed. Nither provide any errors or completed status, progress status.
    Please guide to resolve the issue,
    if you need more clarification, kindly let me know.
    Md Ehteshamuddin Khan
    Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    Take a look at the SU superflows, they will help you troubleshot this issue.
    http://technet.microsoft.com/en-us/library/ff385001.aspx
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Monitor  the resources  of esxi server and VMs

    I want to monitor  the resources  of esxi server and VMs. Can anybody tell me what is the major points I need to be remember so that our esxi server and vms will work smoothly.and I am little bit confused how to manage the charts and graph can anybody plz tell me .
    regards
    vikrant kamboj

    Hi,
    You have to work with overrides in that case. For both Monitors you have to create an override which is targeting your Group of Servers and configure the thresholds as you need them.
    This links should help you:
    http://jimmoldenhauer.blogspot.co.at/2012/11/scom-2012-creating-overides.html
    http://technet.microsoft.com/en-us/library/hh212771.aspx
    Cheers
    Christoph Maresch| My blogs: blog.cmaresch.at | Xing:
    Christoph Maresch | Linkedin:
    Christoph Maresch If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • I have bought an iphone 3gs on ebay it worked with my sim but had last users pics numbers ect, so i restored it butb its failed and now all i get is connect to i tunes but will not restore ????

    i have bought an iphone 3gs on ebay it worked with my sim but had last users pics numbers ect, so i restored it butb its failed and now all i get is connect to i tunes but will not restore ????

    Have latest version of iTunes installed and running. Also make sure you have internet access working and can access Apple websites. Also, make sure you don't have any entries in your hosts file referring to gs.apple.com....If your not sure about how to do that, go ahead and do the rest first. You can come back to that later.....Plug in phone. Put phone in DFU mode.(google put iphone in DFU mode for instructions) Then restore the phone in iTunes by highliting your device in the left column and click on the Restore button. The latest iOS version is 4.3.3. That's what iTunes will restore it to. When it's done restoring, iTunes will ask if you want to restore from a backup or setup as a new phone. I would use the Setup as a New Phone option. Once it's done, you should have a clean install of the iOS and an operating phone, as long as there are no hardware issues with it.

  • SAP B2B dashboard monitoring and it's features with examples/screenshots

    Hi All,
    I'm looking for SAP B2B dashboard monitoring and it's features with examples/screenshots. Can you guys help to detail it out pls
    thx
    mike

    Hi Michael,
    I have the impression that there is some misunderstanding wrt b2b monitoring in PI/PO. Let me shed some light into this.
    The b2b monitoring as part of the b2b add-on and PI is actually an enhancement of the standard message monitor in PI. We have implemented a b2b view which shows you the b2b specific attributes such as sender id, ack status, interchange number, etc., instead of the PI specific information such as message GUID, sender party and component, etc. In addition, you can search the messages based on the b2b specific attributes. This works in tight integration with the Trading Partner Management (TPM) that we ship together with the b2b add-on where those partner specific attributes are maintained. You can access the b2b view either directly via the url mentioned above,.i.e., with alias /b2bmon or you can go to PI message monitoring via alias /pimon, this opens the a2a view, from here you can switch to the b2b view.
    The b2b view is only available as of 7.4 SP9 and b2b add-on SP4 as mentioned in the note 1815991 - Enhanced Local Message Monitor for B2B Messages. Since you are on a lower SP, this is the reason that you cannot see it.
    Whereas the local monitoring in PI gives you a status overview of your messages processed on the very PI runtime component, the Message Flow Monitor in SAP Solution Manager can be used for tracking your message from end-to-end, i.e., it provides you the status on each runtime component that the message goes through. Here, we also do support b2b scenarios. Like in the local b2b view, we show the ack status for technical and functional acks as well. Furthermore, we have built in a b2b specific search based on the TPM attributes.
    I planned to write a blog on the new b2b view but haven't found the time so far, so stay tuned.
    Alex

  • How do I activate a used iPhone 3 with no SIM card for use as an ipod touch?

    How do I activate a used iPhone 3G with no SIM card for use like an iPod Touch? It was apparently on AT&T previously and I have another iPhone 3 that is active on AT&T if that is helpful. Thanks!

    Copied from the link provided.
    Follow these steps to use your iPhone without a wireless service plan:
    Insert the SIM card from your new, activated iPhone or one that was previously used to activate the original iPhone.
    Connect the iPhone to iTunes on a computer connected to the Internet.
    Once iTunes activates the device, you're free to use the iPhone as if it were an iPod touch.

  • Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

    Dear sir
    I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
    Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
    And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
    Please tell me whats the matter?
    My phone serial no  86034HTCA4T
    Modem firmware  04.12.09
    Thanks

    Without contract is not the same as unlocked. The update to iOS 7 relocked
    the iPhone to the wireless carrier to which it was originally locked. You must
    contact that wireless carrier to see if they offer unlocking and if you qualify.
    If you used jailbreak or other hack to unlock the iPhone initially, the method
    used may prevent a legitimate unlock from succeeding and may render your
    iPhone unuseable.

  • I bought this iPhone from Apple Retail Store for the full amount, but  it does not work with my SIM card only works with AT&T

    Hello,
    I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
    I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
    Thanks,
    Best Wishes

    When did you buy it?
    Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
    What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason.  Return it and get your money back, then use that to purchase an unlocked phone.

Maybe you are looking for