Monitoring HTTP receiver adapter ?

Hi Guys,
How to monitor the HTTP adapter ? How can we know when any errors in the HTTP adapter ? Do i need to look in the integration engine ?
Thanks,
srini

If there is an error in your reciever HTTP adapter you will find the red flag in XI itself in SXMB_MONI.
To monitor your Receiver HTTP adapter, you need to use the SXMb_MONI itself.
Regards
Bhavesh

Similar Messages

HTTP receiver Adapter configuration

Hi All,
I want to post an XML message using HTTP Receiver Adapter for my BPM scenario (Idoc to HTTP service)
The receiver has Oracle gateway and it expects message in following format.
HTTP Header
   HttpVersion: HTTP/1.1
   Authorization: Digest username=myusername,
                         realm=[email protected],
                         nonce=dcd98b7102dd2f0e8b11d0f600bfb0c093,
                         uri=/dir/index.html,
                         qop=auth,
                         nc=00000001,
                         cnonce=0a4f113b,
                         response=6629fae49393a05397450978507c4ef1,
                         opaque=5ccc069c403ebaf9f0171e9517f40e41
                         Contentlength: 12345
                         Contenttype: text/html
HTTP Body
   TRANSPORT_PROTOCOL=OXTA
   TRANSPORT_PROTOCOL_VERSION=1.0
   REQUEST_TYPE=SEND
   MESSAGE_ID=A1234567890ZZ0987654321
   MESSAGE_TYPE=XML
   MESSAGE_STANDARD=OAG
   TRANSACTION_TYPE=PO
   TRANSACTION_SUBTYPE=PROCESS
   DOCUMENT_NUMBER=12345
   PARTYID=9999
   PARTY_SITE_ID=8888
   PROTOCOL_TYPE=HTTPSOXTA
   PROTOCOL_ADDRESS=HTTPS://www.me.com/servlets/oracle.ecx.oxta.
   transportAgentServer
   USERNAME=myusername
   PASSWORD=myloginpassword
   ATTRIBUTE1=
   ATTRIBUTE2=
   ATTRIBUTE3=
   ATTRIBUTE4=
   ATTRIBUTE5=
   PAYLOAD=<xml ... ...>
I think this is not a typical HTTP URL type of format, is it?
And I am not sure how I can build the message. Where do I put the parameters like TRANSPORT_PROTOCOL, TRANSPORT_PROTOCOL_VERSION, REQUEST_TYPE etc in the HTTP adapter?
Also is there any place where I can see the final actual XI message that is sent to HTTP service?
Any help will be really appreciated.
Thanks and regards,
Rahul.

Hi Rajeev,
The receiver system should have the details about the content type it expects. I got that from the team who monitors our receiver system.
The HTTP Body of HTTP adapter is made up of PrologPayloadEpilog.
So I added the paramter list that receiver system expects as part of the Prolog. Refer to the HTTP body that I have posted in my earlier message. Out of that till ".....Payload=" is added to Prolog and XI then appends actual payload to it.
To be precise -
TRANSPORT_PROTOCOL=OXTA&TRANSPORT_PROTOCOL_VERSION=1.0&MESSAGE_TYPE=XML&MESSAGE_STANDARD=UNIVERSAL&TRANSACTION_TYPE=XXXE&TRANSACTION_SUBTYPE=ORDER_I&DOCUMENT_NUMBER=PO12345&PARTY_SITE_ID=ESAP_ORDER_I&USERNAME=***&PASSWORD=**&PAYLOAD=
So in the end it worked out well.
Cheers,
Rahul.

HTTPS communication using HTTP receiver adapter URL address as Address Type

Hi All,
If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can you please guide me what are the steps need to be done.
Note : Address type is a parameter in HTTP adapter setup .
Regards,
Reddy

Hi,
Check this,
Configurations in Integration Directory
The plain HTTP adapter gives the receiver system the following specifications:
 Specifications for addressing using a URL address:
Target host, service number, and path prefix including query string:
http://<hostname:port>/<path>?<query-string>
You can identify the target host (HTTP port) of a SAP Web Application Server using
the
ICM monitor
Host and port of the HTTP proxy (optional if there is a firewall between the plain
HTTP adapter and the receiver system)
Authentication data for the receiver system.
See also: transaction Display and Maintain RFC Destinations (SM59).
 Specifications for addressing using an HTTP destination:
HTTP destination
 Parameters from the communication channel for technical routing
Content type (the entry text/XML is expected as default)
Specifies the format that the message contents (the payload) should have.
Optional header fields for the receiver-specific protocol
Attributes for the query string
1. Sender party
2. Sender service
3. Receiver Interface
4. Message ID
5. Quality of service
6. Queue ID
All attributes are selected except for the queue ID. If you do not want a value to be
transferred to the receiver, deselect it. The queue ID is only required if the quality of
service is EOIO.
Specifications for payload manipulation
XML code (default UFT-8)
Specifies the character set.
URL escaping
Presents the XML in a URL-enabled format. Special characters that could be
interpreted as control characters are replaced with escape characters (masked).
Prolog
Enhances the payload for particular servers (optional, see below).
Epilog
Enhances the payload for particular servers (optional, see below).
Enhancing the Payload
Regards
Seshagiri

Schedule HTTP receiver adapter

Hi!
I want to schedule http receiver adapter to run at specified times, instead of triggering a whole end-to-end process. Possible?
I have searched all over, but nothing. Is there any background job in PI that I can schedule?
Thanks!

Hi Marianne,
I never yet tested with a HTTP Receiver adapter but yes it think it's possible (just try): I think you can use the standard scheduler of PI called "Availibilty-time Planning".
RWB > Component Monitoring > Display ALL > Adapter Engine > Communication Channel Monitoring > Availibilty-time Planning.
or directly this URL: http://<host>:<port50000>/mdt/channelschedulingservlet
Define your scheduling by precising dates / frequency / days and option "For Duration = 0 hour" to avoid a polling. Then add your CC receiver to this scheduling.
Maybe you need to put also the option "Manually" for the Control Data of your CC under :
RWB > Component Monitoring > Display ALL > Adapter Engine > Communication Channel Monitoring
Regards.
Mickael
P.S: the time I open my PI and check, Ravi suggest you the same idea...
Edited by: Mickael Huchet on Apr 23, 2009 1:47 PM

HTTP Receiver Adapter - delete ?xml version="1.0" encoding="UTF-8"?

Hi,
Is it possible to delete the part below when sending an HTTP request through HTTP receiver adapter without any java/abap/xslt mapping?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Thanks
Arman

Hi,
<?xml version="1.0" encoding="UTF-8"?>
Specifies that the given message is xml
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Specifies its a MessageType of the payload, without this that message is not identifies and is not processed. Its manditory to have these. Other wise error will raise.
Regards,
Prasanna

Manipulate the URL in HTTP receiver adapter possible?

hello together,
i have an HTTP receiver adapter. To the parameters which i can tick in XI as default (sender party, sender service, ....) i want to add some parameters too.
who can i do that? i have read the weblog from william li. i tried to change the parameter link the comments at the end of the blog (see kurt rasmussen) but nothing happend..... the parameters are not available....
can somebody help me?
thanks a lot
alex

hello michal,
yes, i did. i took the information from http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm and tried to put some special information to URL. nothing to see.
is it mandatory to use a mapping to fill the URL parameter fields, isn't it??
i am using a port sniffer to see the URL and the fields (parameters) in it.
thanks a lot.
alex

HTTP Receiver Adapter

Hi,
I am working on a scenario, where I am posting xml message on https url, for which I am using HTTP receiver adapter.
I have created RFC destination of type 'G' in sm59 to make an https call, where I have provided following details:
In Technical Settings:
Target Host - <Hostname>
Service No. - 443
Path Prefix - <url path>
Logon Security:
SSL - Active
SSL Client Certificate - Default SSL Client (Standard)
UserName - <Username>
Password - <Password>
I have used this RFC destination in 'HTTP Destination' of HTTP receiver adapter.
When I test this interface, I am getting this error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 110 reason</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Can you please help me resolve this issue. Please let me know, if I am following the right steps.
Thanks in advance
Regards,
Amit

Hi -
Since you're using the http destination option in the channel, you just specify the user/pwd in the destination.
Regarding the issue, first, for the Logon/Security option in the destination, unless you'll be using a client certificate to authenticate, you should choose option ANONYM SSL Client (Anonymous) - you still provide the user/pwd in the Logon section. Make sure you have imported the root cert of the CA verifying the server's identity into the client certificate list within STRUST (node SSL Client (Anonymous)).
Also, for some hints on the issue, look at the ICM trace - tcode SMICM->Goto->Trace File... you may need to increase the trace level - SMICM->Goto->Trace Level... After resolving the issue, make sure to set the trace level back to default.
Regards,
Jin

How to set HTTP header field "cookie" with http receiver adapter?

Hi,
I am using http receiver adapter (not axis) in a scenario. I could not set a parameter with key cookie in http header. Is there some kind of restriction to set it? I am able to set others like connection and create custom fields using ASMA and dynamic key configuration via UDF on mapping.
Could you please comment on, is cookie http parameter special or noneditable by PI's http adapter? I am looking for a solution without editing any abap code...
Regards,

I believe it is possible since axis adapter provides very same functionality. Let me summarize my scenario may be it helps:
I am trying to call series of webservice lets say in a BPM. First service (login service) will provide me with a session id (in http header with key Set-Cookie) then I will call another service which has that session id in its http header with key cookie then I am going to logout. So I am testing the second part now, but it doest let me send cookie http header parameter.
I hope I clarified a bit more my problem.
Regards,

Remove namespace alias for HTTP receiver adapter

hello all,
I have a scenario, IDOC->XML (HTTPS). Standard output of PI has ns0: as prefix for each xml tag (ns0 alias for namespace)
I want to remove the namespace alias while preserving the namespace in the output. So removing namespace reference in external definition is not a option.
Is there any way to use XMLAnonymizerBean for HTTP receiver adapter? What are other alternatives (java mapping)?
Thanks,
sachin

Thanks stefan, prateek.
Prateek: I checked this blog earlier. It talks about inbound processing. My scenario is outbound HTTP and I am not sure how I can use specific adapter service as mentioned in blog in outbound case as other scenarios are using standards adapter_plain service.
Stefan: I will try this approach.
regards,
sachin

Dynamic URL for HTTP receiver adapter

Hi all,
when the XI send the http request to the target system, the format maybe like this:
header + body the body is including: Prolog, payload and Epilog
here is about the target system have a 'input' parameter(maybe string type)
is it possible to pass the 'head + body' these value(or maybe the whole http request message) into input
i mean is it possible to set the dynamic URL for http receiver adapter like this:
http://host:port/path?input=<the header and body>
i have searched the blog Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Link:[/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping]
and the similar threads in the forum
please give me some advice
thanks in advance

When a HTTP server requests the whole message as URL parameters, then I assume that the server also requests an HTTP GET, which is not supported by XI.
Could you check this?
Regards
Stefan

Adapter specific properties (http receiver adapter)

Hi,
does anybody know the technical name for the HTTP destination of a http receiver adapter.
The documentation lists only the names URLParamOne to URLParamSix and HeaderFieldOne to HeaderFieldSix.
Neither the technical name for URL nor for a HTTP destiantion are mentioned.
Regards,
Marc

Hello Moorthy,
I know this part of the documentation.
So I set the indicator within the communication channel.
Now, I have to fill the dynamic configuration during my mapping. My code looks like following:
DynamicConfigurationKey keyURL = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", <b>XXXXX</b>);
// access dynamic configuration
DynamicConfiguration conf = (DynamicConfiguration) param.get (StreamTransformationConstants.DYNAMIC_CONFIGURATION);
// set value
conf.put(keyURL, url);
So what has to be filled instead of XXXXX ?
Regards,
Marc

HTTP Sender and HTTP Receiver adapter. Pls advice urgent

Hi All,
There is one Third Party that wants to send XML data and receive XML data with XI.
Please let me know can I use HTTP for that.
How to use HTTP Sender part?
How to use HTTP Receiver Adapter?
Pls send blogs/doc for that
Thanks and Regards

hi.,
Check this thread for the code for a HTTP Client,
/message/266750#266750 [original link is broken]
Also, check these blogs. They use HTTP adapters for their configuration,
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Weblog :
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
note:reward points if solution found helpfull.....
regards
chandrakanth.k

HTTP Receiver Adapter payload as single line plain text with out any tags.

Hi PI experts,
I have a strange problem in http receiver adapter.
Sender RFC (SAP) Receiver: HTTP.
Receiver system expects the output from XI in the below format in a single line plain text with out any tags in the payload. and the content type should be application/x-www-form-urlencoded
Group=Test&Sentinel=Web%20Server&Facility=5345&Order Number=XT-XWHM-Y-NA&Serial Number=123456&@LABEL_QUANTITY=5&@LABEL_NAME=111114_Q
Is there any way to achieve this using http receiver adapter. Business is not ready to accept the output from XI not even in a single element instead they only need it as a JUST a plain text.
Appreciate early response on this.
Thanks in Advance,
Jitender

Dear Ola,
Could you elaborate how you achieved in catching the response data from the receiver in case of HTTP receiver adapter?
The target service is not a WebService but some python script that must to receive some paramters via POST request.
HOW can I post this parameters?
Here you entered the fields of the message type of the request in the header parameters of the receiver adapter? Thats fine.
But what about the message type and vice versa of the response from the receiver?
Regards
Rebecca

How to Call HTTP Sender Adapter of Other Scenar from HTTP Receiver Adapter?

Hi,
I have a requirement to call HTTP Sender Adapter of Other Scenario from HTTP Receiver Adapter?
or
call SOAP Sender Adapter of Other Scenario from SOAP Receiver Adapter?
i.e
SOME SENDER - > PI - > HTTP Receiver - > calling -> HTTP Sender -> PI -> SOME RECEIVER
SOME SENDER - > PI - > SOAP Receiver - > calling -> SOAP Sender -> PI -> SOME RECEIVER
if any one can provide me the screen shot for those SOAP / HTTP Sender or Receiver ADAPTER.
or Point me to Some article with Screenshots .
That would be appreciated with Point.
Regards
PS.

Solved . .

How to trace HTTP receiver adapter error

Hi All,
My scenario is to send PO details to vendor site (HTTPS URL). MY SSL configuration is complete and I have used the SSL certificates in RFC destination of type 'G'. When I test RFC destination connection, it gives me the correct response as '200'.
This RFC destination is used in HTTP receiver adapter of XI to connect to site and post PO xml document. It is passing successfully through Integration Server, as I get success flag in 'SXMB_MONI'. But, it is not reaching our vendor's site.
Can someone help me, with what's going wrong, or how can I trace the error.
Thanks & Regards,
Amit

Hi Sadhna,
It's a B2B scenario, where my sender is configured correctly and the receiver as well.
In sxmb_moni, I am getting successfull status. But, it is not reaching receiver.
Thanks & Regards,
Amit

Monitoring HTTP receiver adapter ?

Similar Messages

Maybe you are looking for