Monitoring Internet Bandwidth Utilization

Dear Net Pros,
I am looking for some software which can help me monitor Internet Bandwidth Utilization in more details. Currently I am already using MRTG to monitor the Internet Bandwidth. Need something deeper than that. Can anyone suggest a suitable solution for the same??
Rushabh

Buying it I think.
Sorry, its a joke.
You can try download a Demo on CCO Software Library.
Well, happy new year and good luck.

Similar Messages

  • Monitoring IPSec Tunnel Bandwidth Utilization

    We have a Cisco ASA 5520 supporting multiple VPNs - both remote-access  and Lan-to-Lan.  We would like to monitor the bandwidth utilization of the IPSec Lan-to-Lan tunnels. How can we do that?
    Thanks,
    Spr

    Hi Spr,
    Check out VPNTTG (VPN Tunnel Traffic Grapher) is a software for SNMP monitoring and measuring the traffic load for IPsec  (Site-to-Site, Remote Access) and SSL (With Client, Clientless) VPN  tunnels on a Cisco ASA. It allows the user to see traffic load on a VPN  tunnel over time in graphical form.
    Advantage of VPNTTG over other SNMP based monitoring software's is  following: Other (commonly used) software's are working with static OID  numbers, i.e. whenever tunnel disconnects and reconnects, it gets  assigned a new OID number. This means that the historical data, gathered  on the connection, is lost each time. However, VPNTTG works with VPN  peer's IP address and it stores for each VPN tunnel historical  monitoring data into the Database.
    For more information about VPNTTG please visit www.vpnttg.com

  • PIX - Monitoring Bandwidth Utilization?

    I have PIX running 6.3 software with a few site to site VPN tunnels. Is there any way to monitor the bandwidth utilization of a particular tunnel?
    Same question goes with ASAs and using ASDM...no plans to get CSM here...
    Thanks,
    Jason

    Try PRTG - Paessler Router Traffic Grapher
    www.paessler.com

  • Prime Infrastructure monitor link Bandwidth

    Hello,
    I would like to know if is possible to monitor a link bandwidth with Cisco Prime Infrastructure and send an e-mail when the bandwidth utilization exceeds a certain threshold.
    Thank you,
    Marco Bartulihe

    Hi Marco,
    To monitor the Bandwidth utilization , you need to have "Assurance License" .
     To use this feature "Interface Tx and Rx Utilization", your Prime Infrastructure
    implementation must include Assurance licenses.
    See below User Guide:
    http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/user/guide/capchange.html
    Here is the Prime Infrastructure Ordering Guide where it explains the Assurance feature:
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-714720
    .html
    Hope it will help
    Thanks-
    Afroz
    ***Ratings Encourages Contributors***

  • Why is there no updates to the firefox throttle add-ons ? Is there an alternative? throttle is Bandwidth utilization throttling and monitoring extension for Firefox

    Why is there no updates to the firefox throttle add-ons ? Is there an alternative? throttle is Bandwidth utilization throttling and monitoring extension for Firefox

    Well, it's probably one of two things: either the awesome dude(tte) who developed this awesome extension was tired of updating or the changes in FFox software architecture carried out between version 3.x and 4+ created challenges that were too difficult for him to surmount or a combination of both. Honestly, I love Mozilla but I think they dropped the ball on the throttle issue. It's such an obvious and necessary function and it's so easy to implement. They should have included it a long time ago as in built feature. And, if you are browsing and looking at this post and you agree. Add a suggestion in mozilla.org. The more of us asking for this function, the better.
    Meanwhile, I have the following solution for you:
    Solution 0.6.9.23.11 (DIY Version of my Solution ):
    Setting Up a Separate Portable Firefox 3.6.x that runs independently of and simultaneously to your latest version of Firefox
    Get FireFox Portable 3.6.24:
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
    It's a portable app, meaning that it's got all it's profiles and preference and application files in the same directory. It won't compete with your current installation of Firefox, has it's own separate extension folder etc...
    Get Firefox Throttle 1.1.6
    http://firefox-throttle.en.softonic.com/ (I couldn't find it in the official mozilla site)
    It will be flagged as incompatible with even that old version of firefox (but it isn't). You just need to turn off compatibility checking. You can do that with this extension:
    https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=search
    If you have Bookmarks you want to port to the portable (bad pun intend), backup them up to bookmarks.json file on your desktop and import them to the portable version. You can export/import more stuff using FEBE addon but that's a whole world of headaches if you don't your doing.
    Many of your extensions favourites extensions will no longer work on FFox 3.6.x but if, in that same addon's page, you look around until you find a link to previous versions of the addon, you will notice that the compatibility info is right below the version numbers. Just download and install the latest version that is compatible with you 3.6.x....
    Voila mon ami! Your FFox 3.6 portable has just become your own private Download Mule whom you can throttle to your hearts content (ever throttle a real Mule??? I wouldn't try it, personally...) Do your regular browsing in another (unthrottled) browser and do your big downloads in the Mule...
    If you want to keep using your brand spanking new Firefox for other types of browsing while using this portable Mule edition for the downloads, just add -p -no-remote to the shortcut leading to your Firefox Portable Mule edition.
    For example, my taskbar shortcut to my Firefox Portable is:
    ""C:\Program Files (x86)\FirefoxPortableLegacy36\FirefoxPortable.exe"
    I just changed it to:
    "C:\Program Files (x86)\FirefoxPortableLegacy36\FirefoxPortable.exe" -p -no-remote
    This will make it occupy it's own independent instance and I can use the both my Firefox Nightly and the Firefox Portable editions at the same time (each one, using a different profile ie. extensions, cookies, password, cache etc).
    If you're on Linux, you can just run this on Wine and set the Windows Version to Windows 2000 in the Wine config,
    If you want to get rid of the Portable Apps splash screen, click here:
    http://www.ghacks.net/2011/06/06/getting-rid-of-portableapps-splash-screens/
    Solution 0.6.9.23.11 (Non-DIY Version of my Solution):
    Download my preconfigured but SWAGGED-THE-HECK-UP PortableFirefox 3.6
    Having realized that some of you may find the above to be daunting. I took my own customize firefox portable, took out all my data and compressed the folder (it's portable, so it'll run as soon as you unzip it).
    Here is a screenshot:
    http://www.mediafire.com/?o95nkwo8y6q535j
    Here is the download link:
    http://www.mediafire.com/?xdw87ivf3184u2s
    Don't forget to modify your Start/Taskbar shortcuts:
    "C:\wherever you decide to put it\FirefoxPortableLegacy36-Swagged-UP!\FirefoxPortable.exe"
    I just changed it to:
    "C:\wherever you decide to put it\FirefoxPortableLegacy36-Swagged-UP!\FirefoxPortable.exe" -p -no-remote

  • Ipqos to monitor bandwidth utilization in zones?

    I'd like to use IPQos and the extended accounting features in the global zone to monitor bandwidth utilization in my zones - ie, keep a simple count of amount of traffic each zone's IPs use.
    I can't quite figure out how to do it, though. The IPQos docs are extensive, but complex.
    Anyone got a simple 'howto' for it??

    not really using ipqos, but i have a dtrace script that tracks socket traffic per pid and uid, you can probably change it to meet your needs.
    #!/usr/sbin/dtrace -Cs
    /* like top but tracks pid's network transfers */
    /* By James Dickens [email protected] */
    #pragma D option quiet
    #include<sys/uio.h>
    int DR; /* Data READ */
    int DW; /* Data WROTE */
    int DRL; /* Data Read in the last second */
    int DWL; /* Data Wrote in the last second */
    int new_data; /* set when there is new data to print */
    dtrace:::BEGIN { printf("Waiting for data...\n"); }
    fbt:sockfs:socktpi_write:entry
    self->registry=1;
    self->uiop = (struct uio *) arg1;
    self->request = self->uiop->uio_resid; /* MAX amount of data to send *
    fbt:sockfs:socktpi_read:entry
    self->registry=1;
    self->uiop = (struct uio *) arg1;
    self->request = self->uiop->uio_resid; /* MAX amount of data to recieve
    fbt:sockfs:socktpi_read:return
    /arg0 != 0 && self->registry/ /* don't grab data if an error was returned. */
    size = self->request - self->uiop->uio_resid; /* update the data read *
    DR +=size;
    DRL += size;
    @data[uid,pid, "rcv'd" ] = sum(size);
    @datac[uid,pid,"rcv'd" ] = sum(size);
    self->request=0;
    self->registry=0;
    self->uiop=0;
    new_data=1 ;
    fbt:sockfs:socktpi_write:return
    /arg0 != 0 && self->registry / /* don't grab data if an error was returned. */
    size = self->request - self->uiop->uio_resid ; /* update amount of data
    sent */
    DW += size;
    DWL += size;
    @data[uid, pid, "sent" ]= sum(size);
    @datac[uid,pid,"sent" ] = sum(size);
    self->request=0;
    self->registery=0;
    self->uiop=0;
    new_data=1;
    tick-1s
    /new_data /
    new_data=0;
    printf("\nwalltime : %Y\nStats for the active last Second\nUID\tPID\tdi
    retion\tBytes\n", walltimestamp);
    printa("%d\t%d\t%8s\t%@d\n",@data);
    printf("Totals for this second\nData Rcv'd ==%d Data Sent == %d TOTAL %d
    \n",
    DRL, DWL, DRL+DWL);
    printf("TOTALS\nData Rcv'd == %d Data Sent ==%d Total TRANSFERRED == %d\
    n",
    DR , DW, DR + DW) ;
    trunc(@data,0);
    DRL=0; DWL=0;
    dtrace:::END {
    printf("\nGrand Totals\n");
    printf("UID\tPID\tdiretion\tBytes\n");
    printa("%d\t%d\t%8s\t%@d\t\n",@datac);
    printf("TOTALS\n");
    printf("Data Rcv'd == %d Data Sent ==%d TOTAL TRANSFERRED == %d", DR , D
    W, DR + DW) ;
    }

  • Cisco Network Assistant - Health Monitor Not Showing Bandwidth Utilization

    Hello,
    Ive setup a new network with 3x 2960 and 2x 3650 switches, trying to view the bandwidth utilization per switch in cisco network assistant in the health monitor unfortunatly it show 0%. I know there is alot of traffic passing through the switches, the other monitors are working correctly (temp, ram and cpu). Is there any special settings that are needed in the switch?
    Thanks

    Srikanth Achanta,
         Thanks for the help!  Here is the output from putty. 
    XXX-Switch1#show controllers utilization
    Port       Receive Utilization  Transmit Utilization
    Gi0/1       0   0
    Gi0/2       0   0
    Gi0/3       0   0
    Gi0/4       0   0
    Gi0/5       0   0
    Gi0/6       0   0
    Gi0/7       0   0
    Gi0/8       0   0
    Gi0/9       0   0
    Gi0/10       0   0
    Gi0/11       0   0
    Gi0/12       0   0
    Gi0/13       0   0
    Gi0/14       0   0
    Gi0/15       0   0
    Gi0/16       0   0
    Gi0/17       0   0
    Gi0/18       0   0
    Gi0/19       0   0
    Gi0/20       0   0
    Gi0/21       0   0
    Gi0/22       0   0
    Gi0/23       0   0
    Gi0/24       0   0
    Gi1/1       0   0
    Gi1/2       0   0
    Gi1/3       0   0
    Gi1/4       0   0
    Te1/1       0   0
    Te1/2       0   0
    Total Ports : 30
    Switch Receive Bandwidth Percentage Utilization  : 0
    Switch Transmit Bandwidth Percentage Utilization : 0
    Switch Fabric Percentage Utilization : 0
    XXX-Switch1#show interfaces | include packets
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         5934288 packets input, 546197579 bytes, 0 no buffer
         308885 packets output, 112398123 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 471000 bits/sec, 109 packets/sec
      5 minute output rate 191000 bits/sec, 104 packets/sec
         315586906 packets input, 252876271812 bytes, 0 no buffer
         0 input packets with dribble condition detected
         267801306 packets output, 88017856802 bytes, 0 underruns
      5 minute input rate 52000 bits/sec, 37 packets/sec
      5 minute output rate 55000 bits/sec, 37 packets/sec
         120529568 packets input, 27639696244 bytes, 0 no buffer
         0 input packets with dribble condition detected
         141742070 packets output, 32628299588 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 1 packets/sec
         5028 packets input, 468079 bytes, 0 no buffer
         0 input packets with dribble condition detected
         7868783 packets output, 893479978 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 2000 bits/sec, 2 packets/sec
         27290987 packets input, 25279841114 bytes, 0 no buffer
         0 input packets with dribble condition detected
         34291062 packets output, 16098960773 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 2 packets/sec
         3431939 packets input, 1615199699 bytes, 0 no buffer
         0 input packets with dribble condition detected
         20491634 packets output, 4044194406 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 2000 bits/sec, 2 packets/sec
         21992856 packets input, 7784577454 bytes, 0 no buffer
         0 input packets with dribble condition detected
         47483488 packets output, 32259133953 bytes, 0 underruns
      5 minute input rate 4000 bits/sec, 2 packets/sec
      5 minute output rate 4000 bits/sec, 3 packets/sec
         17585313 packets input, 6353936617 bytes, 0 no buffer
         0 input packets with dribble condition detected
         40272645 packets output, 23412383942 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         15684208 packets input, 5064927935 bytes, 0 no buffer
         0 input packets with dribble condition detected
         37918769 packets output, 18601560856 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 1 packets/sec
         3150289 packets input, 734752119 bytes, 0 no buffer
         0 input packets with dribble condition detected
         19003285 packets output, 2764534874 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 1 packets/sec
         9029922 packets input, 2596828776 bytes, 0 no buffer
         0 input packets with dribble condition detected
         26350637 packets output, 9197196784 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         7064148 packets input, 2426044345 bytes, 0 no buffer
         0 input packets with dribble condition detected
         22569075 packets output, 8606781954 bytes, 0 underruns
      5 minute input rate 2000 bits/sec, 1 packets/sec
      5 minute output rate 6000 bits/sec, 3 packets/sec
         17875471 packets input, 6103242910 bytes, 0 no buffer
         0 input packets with dribble condition detected
         36793666 packets output, 17156441845 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         19264746 packets input, 8318993561 bytes, 0 no buffer
         0 input packets with dribble condition detected
         40577274 packets output, 20008103681 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         1073682 packets input, 524894617 bytes, 0 no buffer
         0 input packets with dribble condition detected
         1290197 packets output, 967649887 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 2000 bits/sec, 2 packets/sec
         1434841 packets input, 399859897 bytes, 0 no buffer
         0 input packets with dribble condition detected
         15034817 packets output, 1988146136 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 31000 bits/sec, 1 packets/sec
         18246575 packets input, 8048146812 bytes, 0 no buffer
         0 input packets with dribble condition detected
         34632744 packets output, 15331407257 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         12575644 packets input, 3507267403 bytes, 0 no buffer
         0 input packets with dribble condition detected
         27415447 packets output, 13019686162 bytes, 0 underruns
      5 minute input rate 9000 bits/sec, 1 packets/sec
      5 minute output rate 60000 bits/sec, 2 packets/sec
         16988554 packets input, 6347935146 bytes, 0 no buffer
         0 input packets with dribble condition detected
         40488073 packets output, 23658053615 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 2 packets/sec
         1775464 packets input, 456920432 bytes, 0 no buffer
         0 input packets with dribble condition detected
         5550312 packets output, 848939175 bytes, 0 underruns
      5 minute input rate 74000 bits/sec, 62 packets/sec
      5 minute output rate 276000 bits/sec, 66 packets/sec
         38109701 packets input, 21483991198 bytes, 0 no buffer
         0 input packets with dribble condition detected
         53920463 packets output, 35745966772 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 2000 bits/sec, 2 packets/sec
         3905203 packets input, 1197213173 bytes, 0 no buffer
         0 input packets with dribble condition detected
         9322988 packets output, 3398916481 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 1 packets/sec
         31147644 packets input, 7922363688 bytes, 0 no buffer
         0 input packets with dribble condition detected
         64110078 packets output, 59004959626 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         5916020 packets input, 2203139928 bytes, 0 no buffer
         0 input packets with dribble condition detected
         17783154 packets output, 6763038614 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
    XXX-Switch1#show interfaces | include line protocol
    Vlan1 is up, line protocol is up
    FastEthernet0 is down, line protocol is down
    GigabitEthernet0/1 is up, line protocol is up (connected)
    GigabitEthernet0/2 is up, line protocol is up (connected)
    GigabitEthernet0/3 is up, line protocol is up (connected)
    GigabitEthernet0/4 is up, line protocol is up (connected)
    GigabitEthernet0/5 is up, line protocol is up (connected)
    GigabitEthernet0/6 is up, line protocol is up (connected)
    GigabitEthernet0/7 is up, line protocol is up (connected)
    GigabitEthernet0/8 is up, line protocol is up (connected)
    GigabitEthernet0/9 is up, line protocol is up (connected)
    GigabitEthernet0/10 is up, line protocol is up (connected)
    GigabitEthernet0/11 is up, line protocol is up (connected)
    GigabitEthernet0/12 is up, line protocol is up (connected)
    GigabitEthernet0/13 is up, line protocol is up (connected)
    GigabitEthernet0/14 is down, line protocol is down (notconnect)
    GigabitEthernet0/15 is down, line protocol is down (notconnect)
    GigabitEthernet0/16 is up, line protocol is up (connected)
    GigabitEthernet0/17 is up, line protocol is up (connected)
    GigabitEthernet0/18 is up, line protocol is up (connected)
    GigabitEthernet0/19 is up, line protocol is up (connected)
    GigabitEthernet0/20 is up, line protocol is up (connected)
    GigabitEthernet0/21 is up, line protocol is up (connected)
    GigabitEthernet0/22 is up, line protocol is up (connected)
    GigabitEthernet0/23 is up, line protocol is up (connected)
    GigabitEthernet0/24 is down, line protocol is down (notconnect)
    GigabitEthernet1/1 is down, line protocol is down (notconnect)
    GigabitEthernet1/2 is down, line protocol is down (notconnect)
    GigabitEthernet1/3 is down, line protocol is down (notconnect)
    GigabitEthernet1/4 is down, line protocol is down (notconnect)
    TenGigabitEthernet1/1 is down, line protocol is down (notconnect)
    TenGigabitEthernet1/2 is down, line protocol is down (notconnect)
    XXX-Switch1#show interfaces | include line errors
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 2 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         Dave

  • PIX515E - Internal Nodes - Bandwidth Utilization

    Hi Experts,
    The infrastructure has PIX515E as the Firewall and few Web Servers and Database Servers inside. Is it possible to retreieve information regarding the bandwidth available at the outside interface of PIX (Internet link utilization ) utilized by each of the nodes seperately? I could use SNMP to get the overall data transfer at the Outside interface of PIX but isit possible to get utilization details of individual nodes ? Is Netflow an option ?
    It would be great if you could please put in your valuable suggestions.
    Please help !
    Regards,
    Anup

    Hi Jouni ,
    Thank you for the response and congrats on becoming the designated VIP for 2013 Security !
    Thats correct. ASDM has lot of options on the dashboard for tracking the device performance and parameters but unfortunately they are very limited and not that relevant in the case of the requierement.
    I came across this tiny freeware application from Solarwinds which can monitor data transfer through an interface using SNMP in real time and gives you the output in a graph (http://www.solarwinds.com/products/freetools/real-time-bandwidth-monitor.aspx) both traffic in and traffic out. But that too won't be sufficient as it gives only the overall data transfer through the interface.
    Internet ->PIX -> Web Servers/Database Servers/Backup Servers
    I tried taking the NIC card utilization of Servers but that would include all the network activity , including the internal trafic flow.The infrastructure have backup servers in place which is configured to take regular backup of Web/Database Servers , daily as well as weekly which are in the range of GB . So that's some pretty huge traffic flowing across the internal network. So I am not sure how to go about it.
    PIX does not support Netflow too according to this post on CSC (https://supportforums.cisco.com/thread/221338)
    Thanks ,
    Anup

  • Apple TV bandwidth utilization

    Have my ATV with wireless. What's the average bandwidth utilization (kbps) for Apple TV to project stuffs from ipad?

    Nope.
    Planning to use Apple TV in meeting room for presentation purpose. Worry that 1 Aruba 105 wireless access points might not be enough for 20 laptops (internet browsing & internal server access) and Apple TV use.
    Any idea about what's the maximum bandwidth Apple TV will use when doing mirroring?

  • Bandwidth utilization on topology diagram of LMS 4.2

    Hi,
      I am running LMS 4.2 , using that i am monitering some switches . I am using topology services also  . In that i am getting veiw of all connected devices with links. But bandwidth utilization is for those links are not showning in topology veiw .
    Is there any settings to be done in LMS 4.2.2 or any configuration changes to done on my switches ??  to find the traffic flow  bandwidth utiliztion.
    thanks ,
    pandian .

    Hi
    You have to enable RMON to measure bandwidth utilization.
    Take a look on the Monitoring and Troubleshooting With Cisco Prime LAN Management Solution 4.2 guide.
    Begining on the page 7-43 you can find the procedure.
    Hope you can set it

  • Cisco Prime LMS 4.2- Bandwidth utilization

    Dear Experts,
    Is it possible to monitor port level bandwidth utilization like how much b/w currently using.?
    If we generate report, it gives only percentage, can we change it to bps or mbps.?.

    Hi Enea,
    The size of the DB is huge now, you can try to do a Force Purge
    go to Admin > Network > Purge Settings  >IPSLA data Purge Settings
    see if it helps.
    If not then the last resort is to Re-initialize the IPM database.
    here are the steps:
    1.stop the daemon manager
    2.
    /opt/CSCOpx/bin/dbRestoreOrig.pl dsn=ipm dmprefix=Ipm  (linux/solaris)
    NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ipm dmprefix=Ipm    (windows)
    3.start the daemon manager
    Note: If you Re-initialize the database  then you need to create the collectors again .
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

  • Ciscoworks 4.0, Bandwidth Utilization

    Hello!
    I haven't worked with Ciscoworks in a long time and see v4.0 is out. Does anyone if this app is a good tool to monitor bandwidth utilization? We need a good product that can monitor utilization on our WAN circuits and also doing regular backups of our configs for a variety of routers, switches.
    Your opinions are appreciated!
    Ben

    My opinion may be biased, but LMS 4.0 can do what you want.  It has performance management capabilities that can graph and report on interface, CPU, and memory utilization as well as allows for custom MIB object pollers to be defined.  LMS also does configuration collection for a wide variety of devices.
    If you really want to get a good idea if this is the right product suite for you, download the 90-day eval from http://www.cisco.com/go/nmsevals (click on the Network Management Software link).  You will be able to test the full functionality of LMS 4.0 on up to 100 devices for 90 days.

  • High Bandwidth Utilization

    Hi all,
    i am a newbie here. Currently i am working as net admin which is i need to monitoring and manage my workplace network( education center )
    I got a few question about network traffic flow. Here is the issued.
    I got high bandwidth utilization so high after office hours which is only on night. as we know, after office hours there is no person at the office but the traffic flow on bandwidth utilization is high.
    what are the possibilities of this issued? If there any possibilities that cause the event, I'd like to know everything that may cause it.
    Thanks

    What switches do you have?
    What router are you using?
    What servers do you have?
    What time does the high utilization start and what time does it end?
    Are you running backup across the WAN links?

  • Measuring Bandwidth utilization on 3005 Concentrator

    I am looking for an easy way to measure utilization on a site to site vpn configured on a 3005 concentrator.
    Help?

    This can be done using MIBS. The two MIBS listed below give you the total number of octets sent out or received every 5 minutes. You can manually calculate the difference to figure out the utilization.
    .1.3.6.1.2.1.2.2.1.10
    ifInOctets OBJECT-TYPE
    -- FROM RFC1213-MIB
    SYNTAX Counter
    MAX-ACCESS read-only
    STATUS Mandatory
    DESCRIPTION "The total number of octets received on the
    interface, including framing characters."
    ::= { iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) interfaces(2) ifTable(2) ifEntry(1) 10 }
    .1.3.6.1.2.1.2.2.1.16
    ifOutOctets OBJECT-TYPE
    -- FROM RFC1213-MIB
    SYNTAX Counter
    MAX-ACCESS read-only
    STATUS Mandatory
    DESCRIPTION "The total number of octets transmitted out of the
    interface, including framing characters."
    ::= { iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) interfaces(2) ifTable(2) ifEntry(1) 16 }
    On tunnel interfaces, a different set of MIBS called "ALTIGA-MIB" need to be used. I feel you should also have a look at the document "How To Calculate Bandwidth Utilization Using SNMP".
    http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008009496e.shtml

  • 3750 Bandwidth Utilization

    Hello,
    Is there a way to look at the bandwidth utilization on a per port basis on the 3750 switches?  Trying to track down a possible issue remote;y and nothing like WireShark is onsite.
    Thanks in advance.
    All replies rated.

    You can enter "show interface summary" to see the tx rate and rx rate for each port.  Very easy to read format.
    To use wireshark remotely, you could always use ERSPAN, which would send the monitor session to a remote switch.  If I'm not sure of the commands I'm entering on a remote switch, I normally do a "reload in 15".  In case I lose connectivity, it will reload in x number of minutes to restore service.  Save you a commute to the remote site to restore service.  Just don't forget to cancel the reload when you are finished.
    https://supportforums.cisco.com/document/139236/understanding-spanrspanand-erspan#comment-10119266
    If you have network monitoring software, it should show the top talker along with the ip address.
    show arp | i x.x.xx
    this will return the mac
    then enter show mac address-table address xxxx.xxxx.xxxx
    this will show the interface that learned the mac.
    show cdp neigh to verify the port isn't connected to another switch.
    Keep entering sh mac and sh cdp until you locate the port with the mac of the top talker. 
    You can shut the port and see if the trouble goes away. 
    Just be careful when shutting ports.  Its easy to shut the wrong port and lose connectivity.

Maybe you are looking for

  • Set Gradiant color for JTabbedPane

    Hi, can any one tell me how to set a gradient color to Jtabbedpane? Thanks in advance. Regards, Nandha.

  • Slideshow not showing correct images

    I'm using iPhoto 6.0.6 and have a number of slideshows set up. I imported my latest images tonight, allocated keywords and created a slideshow from them as I always do. Everything went OK but when I played one of my slideshows created last year, it s

  • SCA/SDA file

    Hi, I do not have the authorization to SDM and so i am not able to deploy a DC. How can i get the deployable archive of the project SCA/ SDA ? If i want to transport it to the runtime system, do i need a SCA file or an SDA file ? Is it created when i

  • Code to Join three tables.

    Hi All, I am a fresher to this ABAP. I have an task to join three tables which doesn't take much effort. But the problem is: the tables have same columns, (name, age and city) in all the three tables. The layout is as shown below: Table 1  ( T1 )    

  • How to fix a scratch on the back of an iPod touch 5g, How to fix a scratch on the back of an iPod touch 5g

    One day I put my iPod touch 5g in my pocket with a quarter then when I took it out it was scratched on the back