Monitoring JRockit 8.0 from WLS console

Hi,
In JRockit 8.0 docs in section "Monitoring WebLogic JRockit JVM from WebLogic
Server" I read the following:
To monitor WebLogic JRockit JVM, do the following:
Start WebLogic Server with WebLogic JRockit JVM as the VM.
In the left pane of the Administration Console, expand the Servers folder.
Click a server that is using the WebLogic JRockit JVM.
In the right pane, click the Monitoring tab. Then click the JRockit tab.
Unfortunately there is no JRockit tab in WLS 7.0 sp1 console. Is it possible
to monitor JRockit from WLS 7.0 console? Any additional setup needed for that?
Thanks in advance,
Andrew

Unfortunately this piece of documentation refers to the coming release of
WLS, not 7.0. Sorry about that.
Regards,
/Staffan
"Andrew" <[email protected]> skrev i meddelandet
news:[email protected]..
>
Hi,
In JRockit 8.0 docs in section "Monitoring WebLogic JRockit JVM fromWebLogic
Server" I read the following:
To monitor WebLogic JRockit JVM, do the following:
Start WebLogic Server with WebLogic JRockit JVM as the VM.
In the left pane of the Administration Console, expand the Servers folder.
Click a server that is using the WebLogic JRockit JVM.
In the right pane, click the Monitoring tab. Then click the JRockit tab.
Unfortunately there is no JRockit tab in WLS 7.0 sp1 console. Is itpossible
to monitor JRockit from WLS 7.0 console? Any additional setup needed forthat?
>
Thanks in advance,
Andrew

Similar Messages

Edit env-entry values from web.xml in the WLS console.

Hi guys!
Is it possible to define JNDI variables of type java.lang.String using WLS Console?
Thanks

I think this would require the use of a deployment plan, which you can learn about here: [http://e-docs.bea.com/wls/docs103/deployment/config.html] . This won't be as convenient as just editing the value directly in the admin console. In fact, it won't even prevent the requirement of redeploying the webapp. It will only allow you to make the change without rebuilding and repackaging the webapp.
It's questionable whether it's practical or meaningful to change env-entry values in a web.xml without redeployment, because even if you could change the values without redeploying, you'd have to reinitialize the servlet/filter with the changed environment parameter.
If you really need this dynamic reconfiguration ability, you might have to design the facility into your application, using some sort of polling or event handling capability.

Starting Managed Server from Administration Console

Hi
I am new for SOA and fusion. Can anyone share the brief steps that are needed to start/stop a Managed Server from Admin Console.
I did a fresh install on RHEL5 and configure a domain. i was able to start the services from script which are created when creating a domain.
But when i assigned a Managed Server to a Node Manager and try starting the Managed server. It does not start and in the log i can see exceptions like below
Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
java.lang.ClassNotFoundException
Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
java.lang.ClassNotFoundException
I start the services in below order
Weblogic Server
node Manager
and
soa_server
Thanks
Hari

you must set to true the StartScriptEnabled property in nodemanager.properties

How do I visually monitor instrumental plug-ins from the SAME computer??

Hello -
My set-up is noted below. Please note that my audio device for my main computer (the Mac Pro) is the _Motu 2408 MK3_.
For larger sequencing projects, I use up to a choice of three slave computers (an aging Dell Precision Workstation, a Receptor and a MacBook Pro). I am happy to say that all works fine with this set up.
I own many instrumental plug-ins for the MacPro (and the slave computers). Most of the instrumental plug-ins in this computer (and the others) are "powered" by Native-Instrument's Kontakt 2 Player or the full version of Kontakt 2.
For the first time, I was experimenting with the MacPro's IAC Driver. So, for example, I was able to get the piano to play using Kontakt 2 OUTSIDE of the Logic program using the IAC Driver. It is very nice to know that I am able to do this. However, I was not able to visually monitor the audio signal from within Logic as I was playing the piano sound from the "external" Kontakt 2 program. So, to clarify my problem, I could hear the piano, but I could not see the audio signal on the audio meter from within Logic.
First, I tried using the Logic's "*External Instrument*" plug-in. That did not work. Second, communicating with the "external" Kontakt 2 program using Logic's midi instrument via the IAC driver, I tried monitoring the audio signal using an Audio Channel from Logic. I Could not figure out how to route the audio signal so that it could be seen by Logic, so that did not work.
I tried seeing if I could somehow configure the 2408 MK3 driver and CueMix Console. Nothing.
So, here is my question (possibly two questions):
1) Is it possible to configure the MOTU 2408 MK3 device so that I can monitor audio signals from within Logic that originate from instrumental plug-ins activated OUTSIDE of Logic?
If yes, then. . .
2) HOW do I configure the MOTU 2408 MK3 device and/or configure Logic so that the audio signals can be monitored? (And so that I can add EQ and audio effects, etc.??)
Thank you in advance. . .
Ted

First, noequplease, THANK YOU very much for taking the time to answer my question. I sincerely appreciate the time and effort that you shared!!!
I need to clarify myself, I guess. These are not "external" synths in the literal sense. Everything is "internal" within the same computer (the MacPro) as the Logic Pro program. These are instrumental plug-ins like the *Kontakt 2 Player* or the *Kontakt 2* (full version). What I've learned how to do is connect to these instrumental software plug-ins external from the Logic Pro program via the IAC Driver. So, it's all "internal" within the computer, just "external" from Logic. (If that makes sense.)
The reason I'm attempting to connect Logic this way is so that I can use more of the 8 GBs of RAM found within my MacPro. So, in other words, I would use the Kontakt 2 Player as an instrumental plug-in within the Logic Pro program and ALSO connect Logic Pro to the "external" *Kontakt 2 Player* (the _stand alone_ plug-in version) via the IAC Driver.
I can communicate with the stand alone version(s) of Kontakt via the IAC driver. Sound is coming out. However, I have yet to figure out a way route the audio signals from the stand alone plug-in to inside Logic.
I suspect that your suggestion of using an external mixer might be the answer (despite using computer-based instrumental plug-ins). I don't think that there's a way of routing the audio signal from a stand alone plug-in to Logic without the use of some kind of mixer. I most probably will need a digital mixer to take advantage of the 2408 MK3's ADAT digital signals to route the signals back into the MacPro. Sadly, I can't afford a digital mixer at this time.
I don't know. . . .
BUT, like I said in my original post, my CURRENT set-up using the "slave" computers works just fine. I'm just trying to figure out a way to make use of all of my MacPro's 8 GBs of RAM. UGH.
Any ideas??

Migration from WLS 10.0 MP1 to WLS 10.0 MP2

Hello there,
We need to migrate our applications from WLS 10.0 MP1 to WLS 10.0 MP2. Could you please give us an url to download a workshop version that includes WebLogic Portal and WLS 10.0.2?
I've been looking for an installer on the web, but in the Oracle web sites, haven't found any BEA products older versions.
Thanks & Regards
Franco Utreras G.

Hello,
There are 2 options for legacy Weblogic installer download:
Option1: If you have an Oracle Metalink account, you could login and go to Metalink doc ID - 763603.1 which is the "BEA Release Archive". From here you can download the historical BEA releases.
You get the following releases that can be downloaded from here.
Oracle Weblogic Server - Version: 6.1 to 10.3
Oracle JRockit - Version: 7.0 to R27.6
Option2: Login to: https://Metalink.oracle.com
Go to tab: Patches & Updates
Quick Links to: Latest Patchsets, Mini Packs and Maintenance Packs
Patch Bundles for Individual Products or Components
Select BEA Weblogic Platform
Select the WebLogic Main version and SP version
Then you should see the download screen.
HTH
Regards
RC2
http://crkthoughts.blogspot.com

Unable to start Managed server from admin console using nodemanager

I changed the ip address and hostname of the server on which Weblogic Server 10.3.5 is running. After that I am unable to start the managed servers using Admin console. Is there any changes in the nodemanager configuration files which need to be done to start the managed servers from admin console.

Hi there,
Can you check the following configuration in Weblogic admin console ?
1- Check which listen address mentioned under the Machine configuration ( Environment > Machines > select appropriate nodemanager machine >Configuration > Node Manager ). If it is pointing to old host name, change it to new one.
2- Once you done with Step 1. Check whether the machine is reachable or not. ( Machine > [Your Machine] > Monitoring > status.
3- If still isuse persists.. Check the managed server startup log files ( for eg:- managedserver1.out under the path $DOMAIN_HOME\Servers\managedserver1\logs directory.
Thanks
Lakshman

Exporting data from WLS 7.0 internal LDAP

I have 2 dev environments running WLS 7.0. Using the WLS console, I configured
the security realm for one environment, spending a lot of time getting the roles,
groups, and users all configured. I am dreading repeating this for the other
dev environment. Any way to export and import this information from one to the
other?

YES. You can use lbe
http://e-docs.bea.com/wls/docs70/secmanage/ldap.html#1100437
"Peter" <PeterB> wrote in message news:[email protected]..
>
"LP Gorman" <[email protected]> wrote in message
news:3e31dc95$[email protected]..
I have 2 dev environments running WLS 7.0. Using the WLS console, Iconfigured
the security realm for one environment, spending a lot of time getting
the
roles,
groups, and users all configured. I am dreading repeating this for theother
dev environment. Any way to export and import this information from oneto the
other?8.1 has import and export capabilities. In 7.0, you can use a 3rd partytool
like lbe - a java based ldap
browser that has import and export functions.

Failes to start Managed server using Nodemanager from admin console

Hi
I have created the cluster using Weblogic version 9.2 MP3 with
Machine 1 --> Admin (AS) + Managed server (MS1)
Machine 2 --> Managed server(MS2)
All the servers(AS,MS1,MS2) are SSL configured to run in production mode.
Machine is associated with each managed server and node manager is up and running.
I have made Host name verification as "None"
When i start the MS 1 from admin console it comes up in running.However MS2 is not coming in running mode.
The server logs states that "Could not connect to admin server"
Cannot decrypt the password ,username and TrustKeyStorePrivatepassphrase.
Even when i write the clear text password and username in Server_Name/data/nodemanager/boot.properties,then also it throws the same error.
Node manager is not configured to SSL.
Any Clue what i am missing????

Is your Machine #2 shown as "Reachable" in the admin console ( Machines -> Machine2 -> Monitoring )?
Does your managed server #2 have the same userid and password on its Server -> Configuration -> Server Start page ( UserName & Password fields ) as managed server #1?
Your boot.properties only needs 2 lines, like:
password=your plain text password
username=your plain text username

WLS Server shows as down, but is up in WLS console

I have a WLS Domain discovered in OEM (12c). I used the same agent configuration and setup on all 3 servers in the cluster. Server 1 and 2 show as up, as well as the cluster and overall domain. Server 3 shows as down with numerous incidents flagged with Agent down and Weblogic Server Is Down. In WLS Console, all three servers are Running and working properly.
What sort of emctl commands can be utilized to verify that the agent on Server 3 is communicating properly with the WLS? Or steps within OEM, perhaps to verfiy the communication. I have checked config files and setup procedures, and Server 3 is identical to Server 1 and 2, aside from the 1/2 vs 3 and corresponding hostnames. Looking for any sort of input...

That is why I am confused. The agent is actually up. It is secured and sending metrics for the box perfectly. I can perform ./emctl upload agent successfully. When I navigate to Host Targets, the box shows as up. But when I navigate to Middleware Targets, on the WLS domain, Server 3, which is on that box, shows as down. The agent unreachable is cleared on that page, but it shows the WebLogic Server as down.
When I access the WLS console, the server is up, running and working fine. That is why I am lost when it comes to my next step. If agent is working fine and the setup is identical to server 1 and 2. Why is it down, when the rest are up? I noticed in the Server3.log file, I am getting spammed with a Certificate error. "CERTIFICATE_UNKNOWN alert was recieved from *Server 3*. The peer has an unspecified issue with the certificate." I am getting the cert warning from server 3 on server 3. So is there a problem with some certificate and that is why the agent on server 3 can not communicate with the WLS?

Error while shutting down 'Admin Server' from administration console

hi,
When I try to shutdown admin server from administration console(Weblogic server>Control>Shut Down...) I get this error:
No Machine associated with server AdminServer. Please associate a machine to this weblogic server using weblogic console first.
Not able to understand what this means....
thanks

Read up on Node Manager - a outside-of-WLS-process that can start/stop WebLogic on your OS instance. Node Manager uses the "machine" concept.
http://download.oracle.com/docs/cd/E12839_01/web.1111/e13740/overview.htm
http://blogs.oracle.com/jamesbayer/2010/01/weblogic_nodemanager_quick_sta.html

WLS Console doesnt display all AD users using the AD Authenticator Provider

I've set up an AD Authenticator Provider from WLS.
The trouble is we have two sets of users in different branches on the AD directory. This major problem as you can just set the User Base DN higher up the tree and it picks up both sets of users, and it works.
The problem comes when trying to view both sets of users in the WebLogic admin console under the "Users" tab. Only one branch comes up, so you can only see one set of users.
Is there a way to making the WLS admin console see both branches and both sets of users from a viewing problem point of view??
This doesn't stop both sets of users being used as it all works, its just viewing them under the users tab which is the problem.

Please check this thread
http://forums.asp.net/t/1274419.aspx?Get+Last+Logon+date+from+the+active+directory+using+C+
There are two attributes for this in Active Directory:
lastLogon refers to the last logon for the specific server you're querying. This date may be different for different servers (domain controllers), and for some it may be null/empty. This attribute is not replicated.
lastLogonTimestamp refers to the last logon for all servers. This attribute is replicated, which means that all servers have the same value. Only problem is that the default synchronization is 14 days on this attribute which may be too long.

11g node manager reachable but server does not start from admin console

I have a issue with node manager is reachable from admin console and from command prompt it is not connected and could not able to start the managed server.
If i change /config/nodemanager/nm_password.properties plain text and restart it is not reachable in admin console abut can connect from command prompt. I could not able to start the even with this scenario.
i see below error when try to check machine monitor tab.
<Error> <NodeManager> <BEA-300033> <Could not execute command "getVersion" on the node manager. Reason: "Access to domain 'dom_11gint' for user 'Ckr10ycOJN' denied".>
Ckr10ycOJN username in config.xml
node manager and managed servers are not root user process.
Please help me if have any suggestions.

Pls. make sure the following points in your environment.
1) Check '*nodemanager.domains*' file in <<WL_HOME>>\commo\nodemanager directory
 a) This file should have the entry for your domain 'dom_11gint'.
 b) Ensure the path referred in the nodemanager.domains file is correct one.
2) Ensure the following remote server startup parameters are passed properly.
 a) In the Admin Console, Navigate Servers --> <<SERVER_NAME>> -->Configuration --> Server Start
 b) Pass the required Class Path, Arguments, User Name, Password(User name and Password to boot the managed servers)

Reading a String from the Console.

Hello,
I am new to Java... I have to write a program which will read a long value from the console. Can somebody help me in this? or can i read it as a string and then convert to Long ? I prefer the second one as I am planning to convert this code to read a SOAP message... Can somebody help me or pint me to the right direction?
Thanks,

Reading it as a string and then parsing it (Long.parseLong(...)) is the way to do this.
As far as converting to SOAP - slow down. If you're just getting started with java, you're going to be biting off a lot trying to tackle SOAP

IO Error while creating the Datasource in WLS Console

Hello,
We are using Jdeveloper 11.1.1.1.7, I am trying to create a Data Source using WLS Console, I am getting below error
- I tried creating DB connection using SQL developer with same DB Connection info, it works fine.
- I verified the Port by logging into corresponding UNIX box where weblogic server is running, I did telnet, and able to connect.
any ideas are appreciate.
Connection test failed.
IO Error: The Network Adapter could not establish the connection oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:489) oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:678) oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:234) oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34) oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567) oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404) oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:674) oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267) oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134) weblogic.jdbc.common.internal.DataSourceUtil.testConnection(DataSourceUtil.java:314) com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:734) com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:474) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) java.lang.reflect.Method.invoke(Method.java:606) org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306) ..

The Network Adapter could not establish the connection exception is caused by one or more of the following configuration errors:
The database host name, port number, or database instance name is wrong.
The database TNSListener has not been started. The TNSListener may be started with the lsnrctlutility.
C:>lsnrctl start
1. What is the connection url?
2. Is Oracle database running?

User defined form usr disapperas from design console (OIM 9.1.0.2)

Hi,
I have imported usr.xml from one environment to another, and usr form disapperas from design console. Also getting an error message while importing xml.
java.util.zip.ZipException: error in opening zip file
DEBUG,16 Dec 2011 10:35:05,383,[XELLERATE.SERVER],Class/Method: tcDataObj:handleErr - Data: poError.isDetail - Value: com.thortech.xl.orb.dataaccess.tcDataAccessException: DB_WRITE_FAILEDDetail: SQL: ALTER TABLE USR MODIFY Description: ORA-00904: : invalid identifier SQL State: 42000Vendor Code: 904Additional Debug Info:com.thortech.xl.orb.dataaccess.tcDataAccessException
ERROR,16 Dec 2011 10:35:05,385,[XELLERATE.DDM.IMPORT],Label in use. Please rename.
ERROR,16 Dec 2011 10:35:05,385,[XELLERATE.DDM.IMPORT],Error Modifying a Column.
ERROR,16 Dec 2011 10:35:05,385,[XELLERATE.DDM.IMPORT],Exception during import
com.thortech.xl.ddm.exception.DDMException: Unable to save dataobject for SDC
com.thortech.xl.ddm.exception.DDMException: Unable to save dataobject for SDC
Regards,
Sidharth

(1) Run following query to verify if there exist entries for administrators for USR form in UDFD form level and provide results to support representative:
select fug.sdk_key, fug.fug_write,fug.fug_delete, ugp.ugp_key, ugp.ugp_name, fug_rowver from ugp ugp, fug fug where ugp.ugp_key=fug.ugp_key and fug.sdk_key= (select sdk_key from sdk where sdk_name='USR');
(2)In the case query mentioned above in step(1) does not return any rows then there is need to insert one entry for "system administrator" group and one can execute (please take backup of your database for sure before executing these queries) following queries (
INSERT INTO FUG (SDK_KEY,UGP_KEY,FUG_WRITE,FUG_DELETE,FUG_DATA_LEVEL,FUG_CREATE,
FUG_CREATEBY,FUG_UPDATE,FUG_UPDATEBY,FUG_NOTE,FUG_ROWVER)
SELECT (SELECT SDK_KEY FROM SDK WHERE SDK_NAME='USR'),
(SELECT UGP_KEY FROM UGP WHERE UGP_NAME='SYSTEM ADMINISTRATORS'),
1,
1,
1,
SYSDATE,
(SELECT USR_KEY from USR where USR_LOGIN='XELSYSADM'),
SYSDATE,
(SELECT USR_KEY from USR where USR_LOGIN='XELSYSADM'),
NULL,
HEXTORAW('000000000000')
FROM DUAL;

Monitoring JRockit 8.0 from WLS console

Similar Messages

Maybe you are looking for