Monitoring of Disabled Application Pools and Websites

So we have a SCOM 2012 SP1 environment monitoring an IIS server that's Server 2012.  The IIS server has all of the App Pools that are not in use disabled as well the Default website is also disabled.  SCOM unfortunately still picks up that these
are unavailable and complains ad nauseum.  
So the real quest is, is the disabled state going to be picked up eventually? (Now two days later the server objects themselves are Healthy, so I assume I can just close the alerts but ...)

Yes, you can disable alerts of this specific object{Disabled application pools and websites}
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Similar Messages

  • CR XI R2 "Database Login Failed" Recycled application pool and now it works

    Hello,
    I have a web application using CR XI R2 that has several reports which are pushed a dataset.  These reports have been runing fine until today when I received an error stating "Database login failed."  "Object reference not set to an instance of an object" in the report viewer control. 
    I recycled the application pool and the reports started working again. 
    My questions are:
    What could be the cause of this and how can it be avoided?
    Why does recycling the application pool correct the problem?
    Regards.

    Hi Tom,
    Recycling keeps problematic applications running smoothly, especially when it is not feasible to modify the application code. Recycling helps ensure that problematic applications do not cause other applications to fail, and that system resources can be recovered from unhealthy applications.
    Recycling an application pool causes the WWW service to shut down all running worker processes that are serving the application pool, and then start new worker processes. Whether the WWW service starts the new worker processes before it stops the existing one depends on the DisallowOverlappingRotation property in the metabase. Recycling an application pool does not alter any state in HTTP.sys or change any configuration in the metabase.
    Note:
    When an application pool is serviced by more than one worker process, the recycle operation is staggered in some scenarios. Only when a worker process is recycled on demand or when all of the worker processes hit their memory limits at the same time would they be restarted simultaneously.
    For more info regarding this have a look to this [article|http://blogs.msdn.com/david.wang/archive/2006/01/26/Thoughts-on-Application-Pool-Recycling-and-Application-Availability.aspx]
    Regards,
    Shweta

  • Application Pool and JClient

    I don't understand if application pooling could be usefull in a JClient application (either Client/Server and EJB deployed).
    If Yes what kind of benefits should I expect ?
    How can I implement them ?
    TIA
    Tullio

    As said,
    not at present. If you read teh online help, then you will note that the session reference to the am pool is held with session cookies, something that JClient doesn't deal with.
    Frank

  • Setting Users for my managed services and application pools

    I setup my SharePoint 2013 test environment and I developed an intranet site. Now inside my test environment I set all the application pool & managed services to use Farm user account for simplicity. Now I want to setup my UAT environment and I want
    to follow the best practice for managing users and service accounts.
    I have read the “Core Solutions Of MS SharePoint 2013” book, and it have listed the following table:-
    First question. What is the difference when saying that the user “Must be a member of the Farm Administrators group” Or must be “Domain user account”?
    Second question , when I first install SharePoint 2013 a lot of applications pools and managed services such as excel services , access services, Performance Point Service Application, business
    data connectivity and Machine Translation Service  will be automatically created , so which account they will be using and should I define separate accounts for each managed service ?
    Third question. What is the recommendation for SharePoint 2013 regarding service accounts?, to use separate account for each manage service, for example one user for excel services , second user
    for access services ,etc?
    Fourth question. For example the documentation mentioned that the Required roles for the excel services is “Domain user account.”, but what permissions this domain user need to have ?
    thanks for any help, and sorry so adding multiple questions inside the same post.

    Q #1: This means the user must be part of the Farm Admins group. Every user is a Domain User.
    Q #2: Generally those should be using a single Domain User account in a single Application Pool to minimize memory usage and reduce unnecessary complexity.
    Q #3: The less Application Pools the better. E.g. One account/App Pool for all Web Applications, one account/App Pool for all Service Applications, and then Central Administration is obviously separate.
    Q #4: You don't need to specifically give this type of user any sort of rights
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • NLB Web Front End (WFEs)servers & Clustering IIS Application Pool between the two WFEs

    Hi All,
    I have just encountered a very bad experience in my Production environment.My topology is as follows: NLB WFEs, MOSS APP server, Cluster DBs, DCs.
    NLB on the WFEs is working fine. However, for some unknown reason, one of my site under the Application Pool in IIS Manager was stopped on one of the WFE and the site was down. NLB did not redirect request to the second WFE server.
    My question is: How can I make sites under the Application Pool highly available? If any site is in a stopped state, there should be a mechanism in place to redirect request to the Application Pool on the second NLB WFE.
    Kindly help and advise.
    Thanks all.

    Hi Noah,
    The best way of knowing whether the Application pool is down is to monitor it.
    Using appcmd, i can check the state of an application under the application pool.
    I want to create a schedule task which will check the status of the application pool and in case the application pool is stopped, to send me an email as alerts.
    Using Powershell and appcmd, can you guide me on how to do the above i.e I want to use Powershell with appcmd to check for availability of an application pool. If the status is stopped, send me an email as alert.
    Thanks.

  • Desktop Heap usage with 1 Application Pool running as Web Garden

    We just upgraded our webserver from 2003 to 2012 R2. Originally we set it up as using 8 worker processes, which was good enough on our 2003 with 8GB memory. Since now in our new server we have 16GB, I increased the worker process to 16. It works fine until
    we suddenly we got mysterious errors (NOTE: we don't change any web files during this migration.. all were working fine for 1 day, and suddenly the problem just appearing throughout the day). As a quick fix, we restarted the application pool, and we notice
    strange errors in Event Viewer about Complus (Event ID 4689), which lead us to suspect it's Desktop Heap issue.
    Could anybody please direct us on how to troubleshoot? We want to increase performance and use the memory more efficiently, but it will be hard if we do trial-and-error to find the good number of worker process to use.
    FYI the application pool is set to use Application Pool Identity. We also keep all the registry settings as default (HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems\Windows\ SharedSection=1024,20480,768
    and HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WAS\Parameters\UseSharedWPDesktop=0)
    Thanks.

    This one might help.
    http://www.airesoft.co.uk/desktopheapmonitor#install
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Multiple application pools for ColdFusion possible in the same IIS website?

    I would like to set up a single website with CFM11 under IIS8.5
    In this website there are several CFM applications, each under a different "Application" subfolder. For security purposes, monitoring and separate maintenance shutdowns per application, these would all need their own "application pool".
    However, this means that these applications should run under a different application pool than their website root node. In IIS this causes a 403.18 exception:
    HTTP Error 403.18 - Forbidden
    The specified request cannot be processed in the application pool that is configured for this resource on the Web server.
    Most likely causes:
    •An ISAPI filter or custom module changed the URL to run in a different application pool than the original URL.
    •An ISAPI extension (or custom module) used ExecuteURL (or ExecuteRequest) to run in a different application pool than the original URL.
    •You have a custom error page that is located in one application pool but is referenced by a Web site in another application pool. When the URL is processed, it is determined by IIS that that it should have been processed in the first application pool, not the other pool.
    •The Web site has multiple applications configured. The application this request is configured to run in is set to run in an application pool that does not exist.
    All works fine if the "applications" in the subfolders run under the same application pool as the website root. However that is not my preferred setup... The behaviour is consistent over all CFM-applications that I deploy, no matter how simple they are...
    Two questions:
    - is coldfusion actually looking to "higher" folders than I expect it to? (and can that be avoided)
    - any hints or experiences on how to avoid / solve this issue?

    Here are the steps you need to follow:
    When you create connector for your ColdFusion 11 website, you get the “Jakarta” as virtual directory added under your website in IIS. If you don't then add 'jakarta' as virtual directory in your website.
    You need to right click on “Jakarta” folder and click on “Convert to Application”.
    Select the new Application Pool of the Application (say Test) added under website (CF 11)
    Click OK. Restart IIS.
    NOTE :  You need not to restart IIS as well however if you still face the issue after following the above steps then try to restart IIS.
    HTH
    Thanks
    VJ

  • SRDemo with application pooling disabled

    Hi Steve,
    We are building an ADF BC/JSF application that can potentially have a high
    number of visitors simultaneously.
    So i took your advice on your blog
    (http://radio.weblogs.com/0118231/2005/05/09.html) and tested our search
    page with application pooling disabled. Unfortunately some functions of the
    search page stopped working.
    Then I tested the SRDemo application (ADF BC/JSF version) with application
    pooling disabled. When application pooling is disabled the SRDemo
    application does not work properly either.
    So I am wondering...Is there a sample application that works with
    application pooling disabled? Among others, I am particularly interested how
    the following scenario would work:
    1. The user enters a search criteria hits the search button and retrieves a
    list of rows in a JSF table.
    2. The user clicks one row in the table and he is navigated to a page where
    he can view the details of the row he clicked
    3. He hits the browsers back button
    4. He clicks another row in the table.
    5. He is navigated to a page where he can view the details of the last row i
    clicked
    6. He goes to step 3 and repeats the process as many times as he desires.
    This simple scenario works in SRDemo in one context when application pooling
    is enabled. It gives a row currency error in another at step 4. When
    application pooling is disabled the application doesn't show any errors but
    behaves incorrectly.
    I would appreciate your insight on how to make this scenario work.
    Thank you
    Yalim

    I am testing with 10.1.3.0. The change you suggested did not make any difference.The two scenarios I described in my previous post still do not behave correctly.
    However I found out that the advanced search tab functions properly even without application pooling once the token validation is disabled. By that I mean that in the advanced search tab I can go through the 6 steps I described in my first post without getting any errors.
    I also did some testing in 10.1.3.1. I downloaded SRDemo for ADF BC from the check for updates option in the menu. Then I ran the application with application pooling disabled. The 2 scenarios in my previous post did not behave correctly in 10.1.3.1 either. I must mention though; the behavior of the application was different.
    On the other hand the advanced search tab seemed to be functioning properly.
    It seems like when application module pooling is disabled, navigating to the details of a record in My Service Requests tab does not function properly whereas the same functionality works just fine in Advanced Search tab under the same condition.

  • IIS Virtual Directory and Application Pool for Large Images folder

    I have a large images folder used for Upload and Download with approx. 1.5 TB for a web site.
    My Website use AppPool_A.
    For performance reasons, do I need to create different Virtual Directory and different Application Pool (AppPool_B) for Images folder. Assuming, if the number of users increase in upload/download images the memory & cpu utilization will be
    more and App Pool recycle happens more often. And other impact is if Website and Images are in same App Pool, the application performance slow.
    Pls. suggest
    AnilKumar Bedide

    Hi,
    Please post on IIS fourm instead of here.
    http://forums.iis.net/
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

    I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

    It is now confirmed  that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    All of these features can be replaced with 3rd party options.
    I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken.  If I published directly from iWeb to the FPT server those two features continued to work correctly.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
    Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
    This might be of some interest to you at this time: Life After MobileMe.
    OT

  • Was on a website when I got a message asking what I wanted to open the application with and I told it Firefox and now it won't open at all.

    Was on a website when a box opened up asking me what I wanted to run the application as and I clicked on Firefox - now I can't use that website.

    You should never select Firefox as the application to handle a file if you get an open with dialog.
    Firefox wouldn't ask this if it can handle the file.<br />
    You will have to remove that action in Tools > Options > Applications
    *http://kb.mozillazine.org/File_types_and_download_actions
    See also:
    *https://support.mozilla.org/kb/Managing+file+types
    *https://support.mozilla.org/kb/Firefox+keeps+opening+many+tabs+or+windows

  • Killing X Disables my keyboard and monitors. But I can ssh in.

    When using multiple monitors and open source drivers if I kill my X session using bspc quit (I am using bspwm) or just manually killing the pid's I am brought to a black screen, my monitors goto power saving mode, and my keyboard and mouse is disabled. Oddly I can ssh in.
    1. this only occurs when using open source drivers
    2. I have tried this with two different cards. A older nvidia card and a volcanic island series (new) radeon.
    3. Does not occur with proprietary drivers
    4. does not occur with a single monitor
    5. occurs with 2+ monitors only. No problem with a single monitor only
    Ideally I would use my newer radeon card as this is will allow me to use 3+ monitors and the older nvidia is limited to two.
    Furthermore, I would also prefer to use the open-source drivers. They are not officially supporting the volcanic island cards yet, however, everything seemed stable with the exception of the killing the X session
    here is a tail of the Xorg.0.log for the radeon card (don't have the nvidia log any longer, but the symptons were identical)
    here is my 20-radeon.conf
    Section "Device"
    Identifier "Radeon"
    Driver "radeon"
    EndSection
    Section "Monitor"
    Identifier "DVI-0"
    Option "Primary" "true"
    Option "rotate" "left"
    EndSection
    Section "Monitor"
    Identifier "DisplayPort-0"
    Option "rotate" "left"
    Option "LeftOf" "DVI-0"
    EndSection
    Section "Monitor"
    Identifier "DVI-1"
    Option "rotate" "left"
    Option "RightOf" "DVI-0"
    EndSection
    Last edited by matchew (2014-07-18 15:02:40)

    Shit, ConnorBeHan you're right. I'm looking at it now with a rested set of eyes. I guess I don't have the bad log around. I went with the catalyst drivers and was going to call it a day but remembered I was having the exact same problems with the open source nvidia drivers the other week on a much older card. I thought it was the same log due to the
    [ 305.297] (II) evdev: Dell Dell USB Keyboard: Close
    [ 305.297] (II) UnloadModule: "evdev"
    [ 305.297] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Close
    [ 305.297] (II) UnloadModule: "evdev"
    [ 305.297] (II) evdev: Sleep Button: Close
    [ 305.297] (II) UnloadModule: "evdev"
    [ 305.297] (II) evdev: Power Button: Close
    [ 305.297] (II) UnloadModule: "evdev"
    [ 305.297] (II) evdev: Power Button:
    this was also in the log, and I read it as essentially disabling my montiors and keyboards as you would expect on a shutdown. but that is where it ends.

  • Data source for application using both pooled and non pooled connections

    Hi guys.
    I am integrating Oracle's connection pooling into an existing application that had formerly used dbConnectionBroker. It looks like this task should be quite straightforward. However, for consistency, I would also like to replace other Connection logic within the application to use Oracle classes. This will involve using OracleDataSource to obtain a Connection object. ( without pooling ).
    So in this case, the application will use both pooled and non pooled Oracle connections. They will be connecting to the same database. The question I have is in regard to the use of data-sources.xml.
    Are there any special considerations for the required attribute values within data-sources.xml under this scenario ?
    Help will be greatly appreciated.
    Regards.
    Steve.

    Hi Steve -
    It should be feasible for you to define a single datasource using multiple location entries to indicate what sort of pooling behaviour you wish to use.
    If you lookup and use the "location" attribute, you will receive a javax.sql.DataSource object which will not provide connection pooling.
    If you lookup and use the "ejb-location" attribute you will receive a DataSource object that will support connection pooling operations.
    Note that this is using the emulated datasource approach, and transaction support is limited to a single resource (one database) for these datasources - you won't get 2PC support for transactions.
    If you need a transaction to span two separate resources (ie two databases in same tx) then you will need to use the non-emulated datasource approach.
    There is a chapter in the J2EE Services Guide which describes the datasource model we have with OC4J. This might provide you with some more useful information. See Chapter 11 - http://otn.oracle.com/docs/products/ias/doc_library/903doc_otn/generic.903/a97690/ds3.htm#1004903
    cheers
    -steve-

  • New Here: Application to monitor status of Weblogic queues and bridges

    hi
    I'm new to weblogic and I have to build a small tool/application to monitor status of Weblogic queues and bridges.
    I want to know if there is any API that I can use or any script in Java or any other language?
    Thank you

    for that kind of stuff maybe the easiest choice is using WLST
    there are a number of scripts published on the excellent middlewaremagic.com site
    if you google
    site:middlewaremagic.com monitoring jms
    you will find plenty of stuff

  • IIS Issue:when trying to download code from AWS S3 and deploy in IIS server using Power Shell script while Windows startup Default Application pool is not started.

    Hi,
    I am trying to launch Amazon EC2 windows server 2008 R2 instance using AWS Auto Scaling feature. I have used cusmized AMI in Autoscaling Launch configuration to launch an instance.I have placed Power Shell script in AMI. 
    The responsibility of script is to download code from AWS S3 and deploy in IIS server while windows startup first time.
    When i check status, IIS is started succesfully. But default Application pool is not started.
    To resolve this issue i have written one scheduled script. It helps to start the application pool if any application pool is in stopped state.
    After this Application pool is started but i am not able to communicate with IIS server through browser.  
    Please help any one to resolve this issue.
    Thanks in advance

    Hi Vchreddy,
    For the IIS issue, we recommend you can post in IIS forum for more effective support:
    http://forums.iis.net/
    Thanks for your understanding.

Maybe you are looking for