Monitoring of inbound and outbound messages for business system ECC 6.0

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point,  The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

Similar Messages

  • To Monitor inbound and outbound messages for ECC 6.0 business system

    Hi Guys,
    I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
    XI server is on a different system.
    I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
    And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
    When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
    Thanks,
    James.

    James,
    Go to SXMB_MONI in your sending system.
    Here you will find a message ID fro your Message.
    Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
    Likeiwse it can be traced in the target system as well.
    The basic point,  The messages will have same Message Id on your R3 and on XI.
    Regards
    Bhavesh

  • Including Inbound and Outbound Interfaces to Business System

    Hello
    Iam new to SAP XI, but have expierence in webMethods EAI Tool.
    Iam developing a sample interface to pick and put a file in SAPXI itself and for this have created the Interface(data type,mesg typ , mesg inetface , mappin and interface) in Repository.
    Now to pick and put file what setting should have to do in Directory.
    I have added a Business Service, but it is not listing the Component which was  created by me from SLD (only standard component versions which came along with SAPXI are listed). Because of this the interface (inbound and outboound) which was created in my component is not listed.
    Can any one help me with this.
    Also can you suggest an devleopment doc to refer.
    Thanks
    Vinod

    Hi Vinod,
    Check out this thread..
    Inconsistence Adapter Framework
    No entry for adapter engine in CPACache
    Also check OSS Note : 764176 - Error in XI due to inconsistent SLD contents
    This note provides a lot of information, but may not be enough. Carry out the following checks:
    check that the CPACache works ok
    check that sxi_cache works ok
    check that sxi_cache->goto-->AE Cache shows an entry for the adapter engine
    check the roles for the service users, especially xidiruser
    Nilesh

  • No inbound/outbound interfaces for Business Systems

    Hi,
    after upgrading from XI 3.0 to PI 7.1 there are no inbound and outbound interfaces in the Communication Component definition for our Business Systems any more.
    We didn't change anything in SLD.
    Does anybody know why these entries are lost in 7.1?
    Regards
    Thorsten

    Hi Thorsten,
                         I faced the same problem while i was trying to select the interfaces while configuring the scenario in ID.
    I could not found any interfaces after i selected my Business System for the sender.
    Solution: Go to the SLD.
    In the technical system Go to the
    Technical System------> Installed Software (TAB) and add the Product name under this tab as it appears in the IR.
    After this you need to go to the corresponding business system
    Business System-----> Installed Software (TAB) check the installed products under this tab.
    This has done the solution for me.
    Hope this will help.
    Thanks
    Ajay

  • Global inbound and outbound message size

    Is there anyway from exchange shell to list the global maximum size restrictions for inbound and outbound emails? What is the syntax?

    Get-TransportConfig | Select Max*Size
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

  • Inbound and outbound Idoc for shipment

    Hi all,
    I woul need to configure an Idoc type both in outbound and in inbound for a shipment document.
    For the outbound process I'm trying to use the Idoc:
    message type SHPMNT_TNDR
    basic type SHPMNT04
    Is it right from your point of view?
    I don't know which Idoc type I've to use for the inbound process considering that I've to use it in order to add, on an existing shipment document, the stages distances.
    Could someone of you help me!!
    Thanks,
    A

    Hi,
    thank you for the previous answer.
    Really the inbound Idoc should change an existing shipment document in some field.
    I'm trying to build this Idoc type with the WE19 t-code but if I try to elaborate the Idoc I'm not able to process it succesfully (i'll obtain status 51 - message: "Idoc can not be processed without error").
    I'm inserting in this Idoc with WE19 the TKNUM (document number), the field E1EDT18-QUALF=CHA (that should be mean change), E1EDT18-PARAM=1 (IDoc fields are only copied if they are empty) and few some other information like the forwarding agent.
    Do someone have a suggestion for me in order to create this Idoc, in order to test it and change some fields in my shipment document?
    Thanks!!

  • Automate monitoring of inbound and outbound queues

    Hi,
    I think It would be better to go for standard CCMS monitoring, if you dont have very specific requirements.
    Yes, we can easily sent out emails for CCMS alerts. You can either use the auto-reaction method
    CCMS_Send_Alert_to_ALM  (Note 617547 - RZ20: Sending alerts as mail and SMS) or the one
    CCMS_OnAlert_Email_V2 (Note 939616 - CCMS auto-reactions: Help with troubleshooting)
    Regards,
    Francis

    Vamsee,
    Go for CCMS - if you want to send the alerts to your technical support team. This provides active monitoring for SYSFAIL status and also for long running queues in SMQ2.

  • Logging inbound and outbound connections through my Linksys router

    Hi There,
    I have a  Linksys wireless router (WRT54G series) that I use to connect to the internet with my cable modem. I would like to be able to configure my home network to log inbound and outbound connections through my router. 
    My router, which I bought brand new a couple of years ago, provides some very basic logging through its administration interface.  I can view a current log of very recent (within the past couple of minutes) inbound and outbound connections/traffic.  However, I would like to be able to configure my network to log all inbound and outbound traffic for at least 1 or 2 days and have this log saved somewhere so I can retrieve and review it at a more convenient time.  I haven't been able to figure out how to do this with my current Linksys router and would like some help in configuring my system.
    Is it possible for me to configure (perhaps with a firmware upgrade or even by replacing my older Linksys router with a newer one) my router to continuously log a day or more's worth of inbound and outbound connections?  If this is possible, what changes do I need to implement?  Does Linksys offer a wireless router that has more sophisticated logging capabilities?  What is the longest log period that I can create with a Linksys router?
    If it's not possible to create such a log with my router, then what other components would I need to log this information?  I've thought about setting up a Linux server with two network cards installed to act as a gateway between my router and cable modem which will log traffic.  Would this be a good strategy to implement logging?
    Thanks in advance.
    Tom
    Message Edited by   on 07-28-2007 07:44 AM
    Message Edited by   on 07-28-2007 07:50 AM

    well...the router's in-built log will only provide basic information about the incoming/outgoing log . So, it will be a good idea to install a separate log viewer .....

  • Multiple inbound and outbound plugs

    Hi Experts,
    Can anybody give an example scenario where we compulsorily need multiple inbound and outbound plugs for a view??

    Hi snakar rao  ,
                           Suppose we have three views, a , b, c. Suppose we have a requirement like we need a button move_to_b on a, a button back in b which will move back to a, a button move_to_c on b and a button move_to_initial screen on c.
    in this case
    we need one out bound plug in a which will be connected to inbound of b
    one out bound plug in b which will be connected to inbound of c.
    in this case a needs two inbound plugs, one is for navigating from b and the other is for navigating from c
    if there is a requirement like we need to navigate from a to c directly also, in this case c need one more inbound plug thats to connect the inbound plug from a.
    Regards
    Sarath

  • ALE Inbound and Outbound programs

    Hi,
    Can someone tell me as to how we create the inbound and outbound programs for ALEs??And the cenerio where we use the std FMs and where we use the customs programs for the corresponding action?
    Thanks,
    Supriya Manik.

    Hi,
    Go thru this Book : Aravind Nagpal
    go thru this links,
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400365
    Idoc's
    http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
    http://help.sap.com/saphelp_nw04/helpdata/en/12/83e03c19758e71e10000000a114084/content.htm  (change pointer)
    http://www.erphome.net/pdf/tech/J07.pdf#search=%22ALE%20Change%20pointers%22
    http://www.****************/articles/ALE/IDOCExtension/IDOCExtension.htm
    Thanks
    Sunil

  • Seeking recommendations for handling large binary documents with security(preferable) for inbound and outbound scenarios from OSB- SOA and SOA- OSB

    Hi,
    I am currently working on a project with the following requirements
    1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
    2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
    In otherwords, a inbound and outbound integration.
    What I have tried so far and my results:
    Scenario A
    1. Enabled MTOM on SOA composite by attaching wsmtom policy
    2. Created an OSB business service and consumed the SOA composite application
    3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
    Scenario B
    1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
    2. Created an OSB business service and consumed the SOA composite application
    3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
    I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
    Result for Scenario A with file size less than 1 MB:
    Flawless execution with sub-second response times
    Result for Scenario A with file size of 8MB
    First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
    Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
    Result for Scenario B:
    The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
    I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
    I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
    Thanks
    regards,
    Johnny

    I think this is due to the underlying mechanism of weblogic classloading..
    You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
    1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
    2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
    3- Get the oracle support admins at your client site to approve your request for support access.
    4-Once they approve , you can access the support site and raise service requests.

  • Creating and Setting up web services for both inbound and outbound comms

    Hi
    I would like to know the process of setting up inbound and outbound web services using Siebel - is there a tech note /bookshelf article that can guide me through to setting up a 'new/custom' web service.
    I have read up on bookshelf that both business services and workflows can be setup/exposed as web services. Now i would like to find out how to do this.
    Any help appreciated.
    Regards,
    TS

    As you begin to experiment with web services you should take a look at SoapUI. It is a freeware program that makes it a breeze to test both inbound an outbound web service calls. The bonus is that it can also be used to trace what HTTP is going back and forth along with giving you the ability to chain calls together. That is particularly useful for example if you are learning how to do web service calls within the context of a session. http://www.soapui.com/

  • How to do IDOC debugging for both inbound and outbound

    Hi
    can somebody please help me on how to debug the idoc both inbound and outbound in SAP PI.
    Regards
    Blue

    Hi,
    Yes, i have checked but did not get any satisfactory answer.
    here is the solution:
    Inbound:
    We19, Give the idoc #,
    click on the inbound functional module and select the radio button in the fore ground
    check the check box call in debug mode, this will enter in the functional module debugging.
    Outbound:
    Check BD73, give the idoc # and execute
    or
    RSNASTED program and set the breakpoint there
    is this correct, i have not tested/ checked yet.
    Regards
    Blue

  • In WM is it possible to have a TR's for Inbound and Outbound deliveries?

    Hi All,
    In WM is it possible to have a TR's for Inbound and Outbound deliveries?
    In WM is possible to create a TO without TR being created?
    Please let me know the configuration for the same!
    Thanks in advance,
    Kumar

    The delivery itself is treated as transport request, hence you cannot get an extra TR.
    Using LT01 with movement type 999 will create a TO without needing any TR.

  • JCA for JDE-XE - Looking for more inbound and outbound service examples

    Where can I find more examples using JCA for JDE-XE inbound and outbound service / events.
    Edited by: Channu on Sep 23, 2011 1:37 AM
    Edited by: Channu on Sep 23, 2011 1:37 AM

    Hi Ralf,
    Yes, if you put a deny http, it would drop all packets for destination as http port, but be mindful that when you apply an access-list on your inside interface, it automatically activates the deny ip any any right at the bottom, you would be able to see that in the ASDM. So for the users that need be allowed access to the http, needs to be explicitly allowed http access, so your correct configuration would be:
    access-list inside_access_in deny tcp host 192.168.1.1 255.255.255.255 any eq http
    access-list inside_access_in permit tcp any any
    access-group inside_access_in interface inside
    This would block 192.168.1.1 to go to internet, but allow all others.
    Second question, i haven't chceked the ASDM, but just remember out of memory, that this service option should be the protocol, whether ip,tcp,udp,esp or gre etc.
    Moreover always try to block connections as closed to the source as possible, this would mean, if you want to filter traffic going from inside to outside, that should be done on the inside interface not outside.
    Thanks,
    Varun Rao
    Security Team,
    Cisco TAC

Maybe you are looking for