Monitoring of jobs within SAP
Hi,
Can anyone tell me the ways of monitoring jobs within SAP. Please provide me some details..
Thanks..
Swetha.
Hi ,
In SM36, Background jobs can be created.
These Jobs can be monitored in SM37.
Pl.reward if useful.
Thanks,
USR
Similar Messages
-
How to schedule a job in SAP CPS
Hi,
I am new to SAP CPS.
So please tell how to schedule a job in SAP CPS. And which kind of job cam be schedule means BAP report.
Thanks
AnurodhHi,
In the installation and administration guide you'll probably find some examples.
The Job Definition you need is SAP_AbapRun to run any ABAP.
You submit this, specify the parameters as desired, and scheduling information, and that should do the trick.
That is assuming you have already connected CPS to an SAP system.
Check the topics in the docs within the product and on SDN on:
- Connecting to an SAP system
- Submitting Jobs
- SAP_AbapRun
Regards,
Anton. -
IDOC Monitoring issue - job BPM_DATA_COLLECTION* not running.
Hi all,
We are facing an issue with BPM "IDOC Monitoring" (under application monitoring), which we have setup to monitor Inbound and Outbound Idocs in 2 separate R/3 systems.
In one system it works fine, and measured values are returned each time the monitor is set to run according to the specified schedule.
However, for another R/3 system, the monitor has never run, even though the settings are identical in the monitoring setup.
From reading the Interfaces Monitoring Setup guide, I found that this monitor depends on a job called BPM_DATA_COLLECTION* which runs in the monitored system. In the system where monitoring is functioning correctly, I can see this job is completing successfully at the time the monitor is set to run. All I find is completed jobs - no scheduled or released jobs present.
However, for the system where the monitoring is not functioning, I found that this job is not running, but that the job is sitting in scheduled status instead.
When I tested manually running the job in this system, it ran successfully, and in Solution Manager the monitor brought back the measured value, so the monitor only ran successfully when I manually ran the job in the monitored system.
I read notes 1321015 & 1339657 relating to IDOC monitoring. 1321015 appears to be more relevant, yet it does not exactly describe my issue - it mentions the job BPM_DATA_COLLECTION* failing rather than just remaining in scheduled status which is what I see.
Anyone else see this issue before?
On a more general point - the standard BPM Setup guide doesn't really go into much detail on IDOC Monitoring, and makes no mention of what is happening in the background, i.e. the job BPM_DATA_COLLECTION* being created and run as per schedule. This info is found in a separate document "Interface Monitoring Setup Guide".
Is there any single document which describes fully what happens both in the Solution Manager and the Monitored systems when BPM is activated? For example, to describe which monitors require jobs to be run, which monitors require additional setup in monitored system, etc? A document such as this which describes exactly the process flow for each monitor would be very useful in troubleshooting issues going forward.
Thanks,
JohnHello John,
most probably the user assigned to the corresponding RFC READ connection that connects SolMan with the backend system doesn't have proper authorization to release a job. That's why it is only created/scheduled but not released. Verify if the RFC user on the backend has the latest CSMREG profile assigned according to SAP note 455356.
You can also check if the latest ST-PI support package is installed on your backend system as the ST-PI usualy contain the latest definition of CSMREG.
Best Regards
Volker -
Message Monitoring for each within the BPM process
I have a question concerning message monitoring within a BPM process. I receive an IDOC into my BPM process. I then have three transformation steps before sending an E-mail to the end receiver. When I look at the messages in the workflow log, I am unable to see the message after each transformation step. In the log display if I click the instance ID for all steps except the first step I am unable to see a message.
List of Message Objects
Object Type Instance ID Creation Time
ZXI_PROXY...0001 DC9F66530C7899F1AC430017A44943B2 11:04:39
ZXI_PROXY...0001 DC9F66530C789FF1AC430017A44943B2 11:04:39
ZXI_PROXY...0001 DC9F66530C78A5F1AC430017A44943B2 11:04:39
ZXI_PROXY...0001 DC9F66530C78B1F1AC430017A44943B2 11:04:39
ZXI_PROXY...0001 DC9F66530C78ABF1AC430017A44943B2 11:04:39
ZXI_PROXY...0001 DC9F614BA98C51F1AC430017A44943B2 10:28:40
If I click all except the first instance I receive the following message:
No messages available for selection
Message no. XMS_ADM113
Is there a way to make the message persistent after each step within the process? I would like to see the data after each step in the workflow log. Is this possible?
I do receive the e-mail from the send step so I know that it's completing the process. What I'm not sure of is if each step individually processed the data as I expected.Hi Audra,
Check this link
BPM monitoring
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Sachin -
Hi all,
I am running a job which loads data from one DSO to another DSO . The update rules have a start routine which extract data from APO livecache using 2 -3 functional modules for some characteristics of the target DSO .
Earlier this load was taking 1.5 hours to finish but now its just taking more than 4 hours and this job is occupying all system resources and so other jobs are kept in hanged state.
I want to know :
1> How can i monitor the jobs ? i mean how to monitor the jobu2019s system resource utilization (number of processors) ?
2> How can i reduce the time of load ?
Thanks
Sam
Edited by: Samir Bihari on Nov 12, 2009 10:40 AMHi,
With job monitoring, you can monitor individual jobs in the Alert Monitor with regard to status and runtime. This is an important extension of the monitoring of the background runtime environment (see Background Processing Monitor), in which the general status of the SAP background processing is monitored (for example, with regard to utilization or job terminations).
The job monitoring is used to monitor jobs that run regularly, that are always scheduled using a particular name or name pattern (such as a fixed job name with a timestamp). A job of this type is called a job chain.
For more info go through the below link
http://help.sap.com/saphelp_nw70/helpdata/en/60/cd49ff274aa240a7291286ec797618/content.htm
If your Data load are independent with each other you can schedule in Parallel and this will reduce your data load time with comparison to series load. When you are loading data in parallel, you have to keep your Background workprocess in mind. If you have three workprocess and four parallel data load in process chain, fourth will wait until it gets the free workprocess.
The staging process of any significant volume of data into SAP BW presents challenges to system resource utilization and timeliness of data. This session discusses the causes of data load performance issues, highlights the troubleshooting process, and offers tuning solutions to help maximize throughput. Many aspects of data load performance analysis and tuning are covered including extraction, packaging, transformation, parallel processing, as well as change run and aggregate rollup.
For more info go through the below link
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b&overridelayout=true
Regards,
Marasa. -
How to monitor background jobs automatically
Hello,
How to monitor background jobs automatically
(we have more then 100+ jobs in a month and some jobs are repeating 4 - 5 times in a same day ) Now i am searching any salutation for monitor background jobs automatically
Let me know the options
Thanks,
SureshHi,
If your batch job is creating a file in SAP and sending it to another system. These are some things you could do, if you have tools and resources available.
1) When the job ( SAP program ) runs to create the file, ensure there is no file already existing in the landing zone ( AL11), if it does then do not over write, just throw an error, because the last file created did not leave the landing zone, because the other system or middle were did not pick it up. Usually when the middleware or third party system picks up your file from the landing zone, it may delete the file, so next time fresh file can be picked up. It is always good to have date and time stamp on the file that you create on the landing zone, so we could uniquely track which files were creates, when it was created and transmitted.
2) Lets say your job created the file in the landing zone, the FTP program or what ever service or tool that you use to pick the file, if it is running as per design, then it should pick it up, if not you need to see why it is not running, usually the FTP softwars like GIS will throw an error if no file is found, and we could track them.
I am sure there are many other ways to handle if the file really left the landing zone or not. Something to think about. thanks -
CCMS in CPS for monitoring failed jobs
hello,
One quick help needed. Is it possible to monitor failed jobs in CPS using CCMS?
Thanks
AnjuHello Anju,
perhaps you want to check out https://service.sap.com/jsm in order to learn more about the integration possibilities between SAP Solution Manager and SAP Central Process Scheduling by Redwood. Because of this comprehensive integration there is no specific CCMS integration but of course CPS can also write information into the CCMS via XMW interface.
Best Regards
Volker -
How do I monitor running jobs in the Portal (or other J2EE)
How do I monitor running jobs in the Portal (or other J2EE), like SM66 in
R/3 ? We were having an issue that one "job" doing database work was
holding up doing any modification work in KM. The DBAs could see what was
holding this up in the database by not doing commits, but unlike R/3, I
can not find a way to tell what process is generation the database work.
Is there a monitor in J2EE or Portal that would provide this
information? This would be valuable in our Webdynpro for Java environment also.
Thanks for any guidance.Hi,
You can monitor java using Visual Administrator tool and through CCMS RZ20.
Following PDF shows the JAVA monitoring tools availabe in SAP netweaver.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1f21b290-0201-0010-5c9b-e9f777c17902
http://service.sap.com/javamonitoring
Rakesh -
Background job within another background job
Hello Experts,
I have a BDC program (for BW tcode OLI7BW) which executes by scheduling a number of background jobs. This report works fine when run manually. But doesn't work if it is scheduled as a background job through SM36. The status of the job is shown as finished, but the data is not uploaded.
Is it not possible to execute a background job within another background job?
If it's possible, what could be the possible cause of error?
Thanks In Advance
RadhikaHi Radhika,
If you are trying to upload data from a file on ur desktop to Internal table, then background job doesn't work. Always remember GUI means ur front end and all background jobs are run on application server and they dont run w.r.t ur desktop.
Kindly check it and get back to me incase of any queries.
Dont forget to reward points, if found useful.
Thanks and Regards,
Satyesh -
How to schedule a Job in SAP DS ?
AFAIK, a SAP data services job is an ATL (i.e XML) file/code. How do we schedule this code to run automatically ? What runs it ?
In SSIS, Job = Package and it can be scheduled as a *job* in SQL server Agent. The agent runs it as per your schedule. So,
is there some kind of server which executes the code in the ATL file ?Hi Terry,
There are three ways you can manage batch job schedules
1. Using the job scheduler
When you schedule batch jobs using the SAP Business Objects Data Services job scheduler, it creates an entry in the operating system's scheduling utility on the Job Server computer. Windows uses the Task Scheduler and UNIX systems use the CRON utility. (Note that if you make changes to a schedule directly through these utilities, the job scheduler will not reflect those changes.)
2. Scheduling jobs in SAP Business Objects Business Intelligence platform
If you are using SAP Business Objects Business Intelligence platform and you want to manage your
SAP Business Objects Data Services job schedules in that application, first create a connection to a
Central Management Server (CMS), then configure the schedule to use that server.
3. Using a third-party scheduler
When you schedule jobs using third-party software:
• The job initiates outside of SAP Business Objects Data Services.
• The job runs from an executable batch file (or shell script for UNIX) exported from SAP Business Objects Data Services.
Note:
When a third-party scheduler invokes a job, the corresponding Job Server must be running.
Regards
M Ramesh -
Hi Friends,
what is tcode for run v3 job in sap R/3 ?
Thanks & Regards,
Upendra.Hi,
For scheduling V3 job Go to LBWE--Select the Application Area - select Job Controland give your periodicity
V3 Job
Regards,
Marasa. -
Using &variables in a SQL Script scheduled job within OEM
Hi...I've been searching through the forum looking for any examples of setting up a job within OEM, using the SQL Script job type, where I can basically use a WHERE clause that says 'where column_name = &variable_name' and somehow provide that at run time, as if I were in a SQL*Plus session and using a PROMPT and ACCEPT command. I thought there might be a way to emulate that situation by placing the value I'd like to qualify on within some placeholder in the Parameter section of the job. We have a few users who have limited access to OEM and need to run queries on GRANTS and ROLES for various users etc. I realize there are other ways to do this, however I'm wondering if OEM has a capability like this. Any info is appreciated! Tks!
Looks like you're missing the schema name and you'll want to use QUOTENAME to add delimiters to the objects
e.g.
DECLARE @DATABASE AS VARCHAR(50)
DECLARE @SchemaName as SYSNAME;
DECLARE @TABLE AS VARCHAR(50)
DECLARE @QUERY AS VARCHAR(MAX)
SELECT @DATABASE = '602'
SELECT @SchemaName = 'dbo' --change as appropriate
SELECT @TABLE = 'Items'
SET @QUERY = 'SELECT TOP 10 * FROM ' + QUOTENAME(@DATABASE)+'.' + QUOTENAME(@SchemaName) + '.'+QUOTENAME(@TABLE)
print @query
EXEC( @QUERY) -
How to stop print job in SAP?
Can some help in explaining how to stop print job in SAP .???
iHI Swati,
Thanks for the additional info. as per previously mentioned use SM37 - however be sure to check the box ''Sched' when performing the search for the job in question (and untick the others so the resulting list will be clearer to read etc.)
You can then choose to delete the job and reschedule it to different periods via SM36
Best of luck,
Rgds, Derrick -
EWA for Business Objects (XI 3.1) within SAP Solution Manager
Hello!
We use Business Objects (XI 3.1) and would like to get weekly a EWA report within our SAP Solution Manager.
Our SAP Solution Manger has only ABAP stack and it has the SPS version 25.
We also do not use Wily Introscope/Diagnostics and E2E tools within SAP Solution Manager.
Question
Is it possible to set up EWA for Business Objects with our requirements (SOLMAN with ABAP stack and without E2E/Diagnostics tools)?Hello,
The short answer is no. You can verify this in SAP Note 1507629 - Preparing a BOE system for Service Sessions in Sol. Manager.
"...1.) Managed System Setup
Perform the Managed System Setup for SAP BusinessObjects Enterprise as
described in the "End-to-End Root Cause Analysis System Landscape Setup
Guide". This guide can be found in the SAP Service Market Place:
-> http://service.sap.com/diagnostics
-> Navigate to the "Media Library"
-> Open the document "SAP Solution Manager Landscape Setup Guide"
Please ensure that you perform all steps mentioned in the guide which
are relevant for your product and version. Please read also SAP note
1357901, which is also referred to in the above mentioned setup guide."
So this is a requirement. There are also pdf documetns attached to this note that describe how to setup the EWA in Solution Manager. EGI_SBOP_EWA_part1.pdf and EGI_SBOP_EWA_part2.pdf.
The fact you have no Java stack and have not installed Diagnostics, just means it has not been done. It can be done and then you can do a managed system setup, and the balance of tasks required to prepare the system and Solution manager to generate EWA reports for the BOE system. Its just more work, not a show stopper.
Regards,
Paul -
Possibility to execute Acrobat Pro's "Combine files into PDF" function from within SAP?
Good day.
Presently, a company uses Acrobat Pro to manually combine files such as *.pdf, *.jpg, *.doc, which have been downloaded from SAP's Document Management System, into one pdf file. I would like to know if it is possible to automatically execute Acrobat Pro's "Combine files into PDF" function from within SAP (ECC 6.0) application system. I'm wondering if this could be achieved from a program via OLE (Object Linking and Embedding) or RFC (remote function call).
Thanks in advance for your thoughts and inputs.Yes, you can combine PDF files via IAC/COM methods.
Maybe you are looking for
-
I have tried to transfer music from my windows 7 media player to my ipod.This is the first time i have tried to use my ipod on my new computer .In the media player it doesnt give me the option to add to itunes library it just give me the option to se
-
Hi Expert, When I enter reference in MIRO then I want the text in reference automatically fill in the assignment? It is possible? Thanks Regards Fei
-
Not Able to maintain the Stock
Hi All, When i am using the MB1C Transaction code fro Maintaining the Stock then the error is occur "Fld seclectn for movt type 561/acct 799999 differs for Ext. GA amount in LC (023)"For that reason I am not able maintain the Stock. Can any one give
-
How to give permission to user to run and install application like data card or modem
Hi, when a standard user try to use an Data card (airtel 3G Dongle), windows 7 prompts for a administrator password to run the application. I have to go and type admin password each time when that person uses the dongle. Is there any way that i can
-
I had updated my E90 phone firmware from Nokia Software Updater. The update process went through easily but the phone did not restart properly. Phone screen is shows Nokia written on the screen and then the screen goes blank and the phone screen agai