Monitoring on the Application System

Hi,
How do I set the trace levels and logging on the Integration Engine of an application system. (It is an SAPCRM 4.0 system)?  I want to monitor synchronous messages sent to it.
I tried going to sxmb_adm-> Integration Engine Configuration->Specific Configuration. But in the category RUNTIME, I do not see the parameters for TRACE and LOGGING like we see in the Int. Server
Is there some other way to monitor the synchronous messages in the App. system?
Thanks & Regards
Manish

Hi Manish,
You say the system is a CRM 4.0, that's a WAS620 system as far as I now. Am I right?
If so, I suppose you use the APPINT plugin of XI2.0 on the system.
The place to change the pipeline settings for an XI2.0 based system is diffent to the XI3.0. In the Integration Engine menu you chose Configuration, Pipeline Settings, and then you will on the screen Pipeline Settings Display.
In this screen you can change the settings for the tracing and logging.
Some general info about monitoring:
To display information on XML messages, the messages must first have been logged.An XML message is logged when it is processed if:
·  It is an asynchronous message (persisted implicitly)
·  Logging for the underlying pipeline is activated (general logging of all pipeline steps or logging of a particular pipeline step)
I hope this is enough info. There's more on help.sap.com, when you go to netweaver <04 --> XI2.0
Best regards,
Alwin

Similar Messages

  • You can't open the application "System Preferences.app" because it is not supported on this type of Mac

    All of the sudden my System Preferences in Mavericks has stopped working and I get the error message:
    You can't open the application "System Preferences.app" because it is not supported on this type of Mac.
    It was working fine before this, and I have run Permissions Repair, restarted to another partition and run Diskwarrior and TechTool Pro, but none of those has helped. Anyone have any ideas why this happened, and what I can do to fix it?

    See this entire thread
    https://discussions.apple.com/message/4241006#4241006

  • HT4534 i accidentaly erased the application system prefences how do i get it back?

    i accidentaly erased the application system prefences how do i get it back?

    Often when people think they've deleted an application, what's really happened is that they deleted its icon from the Dock. In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A to open the Applications folder. If the application is in that folder, drag it to the Dock (not to the Desktop or anywhere else.) The other Dock icons will move out of the way to make a place for it.

  • You can't open the application System Preferences because it may be damaged or incomplete.

    You can't open the application System Preferences because it may be damaged or incomplete.
    say this and same on mac store when i press app

    Back up all data.
    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • I accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

    i accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • "The application System Preferences quit unexpectedly" everytime

    When I open my system preferences and go to Desktop and Screensaver, I never can do anything. The second that I click on it, it closes and says "The application System Preferences quit unexpectedly." It only closes when I click on Desktop and Screensavers and never with anything else.
    What can I do to fix this?

    Thank you, it sort of worked for half of it. I can now change the desktop, but the screensaver still doesn't. It works if I keep it on the desktop tab, but once I click on Screensaver it closes.
    These are the .plist files I put on the desktop:
    com.apple.systempreferences.plist.saved
    com.apple.systempreferences.plist
    com.apple.dock.plist
    com.apple.desktop.plist
    Those changed the desktop back to the original Tiger blue default and reset the dock.
    Is there anything else you can think of?

  • The application system preferences can't be opened

    After limiting spotlight searches to external shared hard drives, I cannot eliminate this limit because when I go to System Preferences to change Spotlight, I get an error message "the application System Preferences can't be opened". How can this be reset?

    No error code.
    I finally went to caches in my library and delted "com.apple.preferencepanes.cache".
    I tried to restart my computer but it hung up. I unplugged it and re started.
    Maybe primitive. But it seems to be working so far.
    thanks!

  • Not able to see any of the application,system windows in jdev

    Hi everyone,
    I am facing a strange problem in jdev 10.1.3.1.I am not able to see any of the application,system and other window.I tried clicking the view button in the toolbar and clicking on the application and system navigator to show off in the window,but there was no luck.I continue to see a blue screen.Even i deleted the jdev10.1.3.1 and installed again the new jdev10.1.3.1 but still then its not showing me the windows.When i tried to explore more clicking Tool->Preferences it gave me the following exception:
    java.lang.NullPointerException
         at oracle.tip.tools.ide.tx.addin.MapperOptionsPanel.load(MapperOptionsPanel.java:412)
         at oracle.tip.tools.ide.tx.addin.MapperOptionsPanel.onEntry(MapperOptionsPanel.java:400)
         at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:926)
         at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:899)
         at oracle.ide.panels.MDDPanel.mav$enterTraversable(MDDPanel.java:106)
         at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1348)
         at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1216)
         at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1210)
         at javax.swing.Timer.fireActionPerformed(Timer.java:271)
         at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
         at java.awt.Dialog$1.run(Dialog.java:515)
         at java.awt.Dialog.show(Dialog.java:536)
         at java.awt.Component.show(Component.java:1300)
         at java.awt.Component.setVisible(Component.java:1253)
         at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
         at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
         at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
         at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:276)
         at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:597)
         at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:391)
         at oracle.ide.cmd.IdeSettingsCommand.doit(IdeSettingsCommand.java:47)
         at oracle.ide.controller.CommandProcessor.invoke(CommandProcessor.java:259)
         at oracle.ide.controller.IdeAction.performAction(IdeAction.java:541)
         at oracle.ide.controller.IdeAction$1.run(IdeAction.java:772)
         at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:789)
         at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:498)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
         at java.awt.Component.processMouseEvent(Component.java:5488)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
         at java.awt.Component.processEvent(Component.java:5253)
         at java.awt.Container.processEvent(Container.java:1966)
         at java.awt.Component.dispatchEventImpl(Component.java:3955)
         at java.awt.Container.dispatchEventImpl(Container.java:2024)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
         at java.awt.Container.dispatchEventImpl(Container.java:2010)
         at java.awt.Window.dispatchEventImpl(Window.java:1774)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    I dont have any clue on this.
    Please help me in resolving the problem and finding some solution to this.
    Thanks & regards

    Try and see if this helps:
    http://blogs.oracle.com/shay/2006/11/10
    Although it seems that just removing JDeveloper and reinstalling from scratch should have done this.

  • 10.5.2: You cannot use the application "System preferences.app" with...

    Hello
    after (successfully) updating from 10.5.1 to 10.5.2, the System Preferences.app cannot be started. Either the application does not start (a silent error) or there is a message "You cannot use the application "System preferences.app" with this version of MacOS X." The version is 10.5.2, according to "About this Mac", while the application version is 3.5. The same happens when I attempt to open "Time machine preferences" using the new menu/icon on the bar.
    Any help is appreciated.
    Thanks in advance,
    Marinho.

    Thanks, I did that, but it didn't solve the problem.
    By the way, the application version (of System preferences.app) remained the same (old one). Then I removed the application to Trash (meaning to restore it later if required) and applied the update again (and a third time), but then a new System preferences.app was not installed and the older one has disappeared from the trash! What a mess this update turns out to be...
    Marinho.

  • You cannot use the application "System Preferences" with this version OS X

    You cannot use the application “System Preferences” with this version of Mac OS X.
    I received this error message when trying to run System Preferences (SP) for the first time after running the 10.5.1 update (from the download, not software update). After the update, I repaired permissions. Did another restart. Same.
    I reinstalled 10.5.1 update. Same message. Logged in as another user. No change.
    I removed the com.apple.systempreferences.plist from ~/library/preferences. No change, and it did not re-create the .plist file.
    Any ideas? No one else seems to be having this problem as far as I can tell.
    dkrockville

    I have had this problem with many applications after updating to 10.5.1, including
    System Preferences, Calculator, Preview. Tried repairing permissions, and other tips from this thread. The strange thing is, the actual Leopard applications seem to have actually vanished? I don't know if this is anything to do with Time Machine; Anyway, My fix was:
    Download Pacifist (if you don't already have it), locate the apps that you're having problems with on the Leopard install DVD, and copy them to the Applications Folder (Click on 'Replace Bundle')
    Problem Solved for Me!
    Hope this Helps!

  • How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across.  However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

    I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro.  I'm finding that it doesn't run as quickly as it used to. 
    A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library.  Keep all documents, pictures, music etc on the current hard drive. 
    I would be grateful if someone could help me with:
    1) installing OSX on the SSD without copying across data from the current hard drive
    2) transferring applications, system and library folders across to the SSD so that they still function
    3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
    However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
    If anyone could help with this, it would be much appreciated.

    If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
    Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD  using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
    There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
    Clinton

  • The application "System Preferences.app" can't be opened. -10810

    Hi,
    When I try to open the System Preferences (via Finder/Spotlight) I get the message in the title.
    If I open via terminal with:
    open /Applications/System\ Preferences.app/Contents/MacOS/System\ Preferences
    it works fine.
    Can someone help me out?
    Thanks

    You can try deleting the ~/Library/Preferences/com.apple.systempreferences.plist
    http://reviews.cnet.com/8301-13727_7-57613818-263/how-to-manually-edit-defaults- plist-files-in-mavericks/?part=rss&tag=feed&subj=MacFixIt

  • No audio, in the volume mixer menu,the applications/system sounds has no movement video is playing

    HP G62-154P/WINDOWS 7

    Hi Jeff
    Thanks for the quick reply.
    Yes, I tried burning to different burners and got the same results.
    I've played it back on different DVD players as well as the DVD player in Windows and same thing.
    I've used DVD+R and DVD-R.
    I've reburnt older projects and they all came out fine.  It's just this particular project.  I've even removed the Preference file ...  I've even redid the project from scratch.
    Strange .....  All the audio works fine for the clips and the motion menu in the chapters menu.  The same motion menu and audio is used in the man menu and that's where the audio is not heard.
    I think it's Encore doing the burning that's the problem?
    I'm trying one more thing and that is to create a DVD image (VOBs) and then using a different burning software (Nero) to burn the DVD.
    I'll even try to create 2 empty menus with just the same motion menu and audio playng.  There is something funky going on here ...
    Norman

  • Application system name against the Integration server is missing

    Hello All,
    In the technical system browser, for exchange infrastructure, I cannot see the application system name against th  
    View and Define Systems and Servers
      Technical Systems   
      Technical System Type:   Exchange infrastructure 
      Name                                     Type                           Domain                    Application System 
    Adapter Engine on xi7.ps3181    XI Adapter Framework  Domain ps3181       XI7 on ps3181     
    Domain ps3181                         XI Domain                   Domain ps3181 
    Integration Directory on xi7.ps3181 XI Integration Directory Domain ps3181 XI7 on ps3181
    Integration Repository on xi7.ps3181 XI Integration Repository Domain ps3181 XI7 on ps3181
    Integration Server on ps3181 XI Integration Server Domain ps3181  05/16/2008 13:17
    Rowof 6 
    -Select Technical System Type-
    Web AS ABAP
    Web AS Java
    Standalone
    Third-Party
    Exchange Infrastructure
    All
         e integration server.

    Hi Olivier,
    I removed that TSK.bck from the programfiles. Still it is with me.
    I started the installation once again. And now its throwng one more error SAPview.log
    (DB) ERROR: DDL statement failed
    (CREATE VIEW "Z_T_BW310_2" ( "MANDT" , "KOKRS" , "KOSTL" , "BUKRS" , "VERAK" , "MATKL" , "MENGE" , "MEINS" , "PREIS" , "WAERS" , "BEDAT" , "WERKS" , "MATNR" , "BANFN" , "BNFPO"  ) AS SELECT T0001."MANDT", T0001."KOKRS", T0001."KOSTL", T0001."BUKRS", T0001."VERAK",  T0002."MATKL", T0002."MENGE", T0002."MEINS", T0002."PREIS", T0002."WAERS", T0002."BEDAT", T0002."WERKS", T0002."MATNR", T0002."BANFN", T0002."BNFPO" FROM "CSKS" T0001, "EBAN" T0002 WHERE T0001."WERKS" = T0001."WERKS")
    DbSlExecute: rc = 103
      (SQL error -942)
      error message returned by DbSl:
    (DB) ERROR: DDL statement failed
    (CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001"  ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001",  T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
    DbSlExecute: rc = 103
      (SQL error -942)
      error message returned by DbSl:
    (DB) INFO: disconnected from DB
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080806132854
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080806134255
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
    Compiled Mar 14 2006 23:27:59
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0
    DbSl Trace: Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
    (DB) ERROR: db_connect rc = 256
    DbSl Trace: Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
    (DB) ERROR: DbSlErrorMsg rc = 99
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080806134255
    What do you suggest?
    Why I am getting this error?
    In the SAPnote 455195: its given to merge the TSK and TSK.bck files after the elimination of the error.
    Preveously i got one error with Administrator user and i solved that by starting the installation with SIDADM user.
    Then how to merge the two files?
    And now why i am getting this error.
    Any clue?
    Manisha

  • The application cannot be launched -10810

    I just started getting the following error message on my iMac Core Duo:
    The application "Firefox, Address Book, System Preferences --insert app name here" cannot be launched -10810
    This seems to happen after the Mac has been running for a while (a day or so), and restarting it seems to fix the problem. But, it's annoying that it continues to happen. When it does, I can use the programs that are already open, but I cannot launch any new programs. Many other functions, such as simply double clicking a printer to open its dialog box, just don't do anything.
    I've had other problems with the Mac freezing up and needing to hold down the power button for several seconds to restart it. I don't know if it's related. I've had the Mac sicne not long after the Intel models were released, is it possible that over the last several months I've gotten some non Rosetta/non Intel friendly software that's causing problems?
    Thanks,
    iMac Core Duo 20"   Mac OS X (10.4.6)   Intel, 256MB Video Card, 1.5GB Ram
    iMac Core Duo 20"   Mac OS X (10.4.6)  

    That error message means that you have too many applications and processes open on the iMac. Turning off Windows File Sharing from the Sharing pane of System Preferences except when you need it turned on will help. Otherwise, the next time you restart, open the Activity Monitor in the /Applications/Utilities/ folder immediately and keep an eye on what it reports while you work.
    (13075)

Maybe you are looking for