Monitoring Servers and/or Services when DBBL is on.
Hi all,
I have my WLE configuration file (ubbconfig) configured in MP mode (*RESOURCES section, MODEL parameter). When MP is active, the server DBBL is on and then when I try to do a "psc" or "psr" in the tmadmin console, i cannot see the load done from my services. All load is incremented inside DBBL. Is there a way to monitor my services?
Thanks in advance for any help on my question.
Set "d -m all" in tmadmin to retrieve statistics from all machines.
nello wrote:
>
Hi all,
I have my WLE configuration file (ubbconfig) configured in MP mode (*RESOURCES section, MODEL parameter). When MP is active, the server DBBL is on and then when I try to do a "psc" or "psr" in the tmadmin console, i cannot see the load done from my services. All load is incremented inside DBBL. Is there a way to monitor my services?
Thanks in advance for any help on my question.
Similar Messages
-
Why does my external monitor name and resolution change when I close the lid?
When I close my lid on my early 2001 MBP, the external monitor reverts to a lower resolution. I am not even able to select the proper resolution.
I am using VGA (I need VGA for my KVM). When the lid is open, the monitor sees the correct monitor, and I can set the correct resolution. When the lid closes, it only shows a genertic VGA monitor and defaults to a lower resolution. I am not able to change the resolution up when I have the lid closed as well. Does anyone have any insight into this?Show Hard Drive on Desktop...
Finder > Preferences > General > Show these items on the Desktop. -
Checking item and line service when saving PO and Contract
Hello people,
my requirement is:
When saving the Purchase Order or the Contract, checking the material group of the item and their line services. They must me equal, otherwise an error message must be raised.
Do you know what User Exit ou BADI must be used?
Thanks a lot!Hi,
please try to implement additional checks via badi ME_PROCESS_PO_CUST and / or EXIT_SAPLMLSP_030.
Regards,
Edit -
Gateway Host and Gateway Service
Hi,
How do I find the gateway host and gateway service when I am creating a RFC Destination. I am new R3 so please be as detailed as possibleHi, well i have a similar problem. I am trying to run the Template Installer after installing NetWeaver2004s.
During the PIPostInstallProcess i am receiving following error while trying to import Execute SWF_XI_BPM_AUTO_CUSTOMIZE:
Element 'SWF_XI_BPM_AUTO_CUSTOMIZE':Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=sapru02 SYSNR=00 GWHOST=sapru02 GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Mon May 14 14:54:27 2007
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic_mt.c
LINE 10713
COUNTER 1
Element 'SAPDEMO.DX1.Backend.Unclassified':!AbapConfigurationWriter.FM_CALL!SWF_XI_BPM_AUTO_CUSTOMIZE!AbapConfigurationWriter.FAILED!
Well the Host and the Gateway is right, i checked in SMGW. So what might be my problem?!
thx in advance, Jens -
Automated Start Stop of Application Servers and CI
Hello,
For our non-production systems, we take offline backups every week. I was just wondering if there's anyone out there who has a UNIX script that can start and stop application servers and the CI when taking an offline backup.
Thanks,
FlorencioHi,
have you thought about using online backups ? This makes live easier. If you have DB2 9 you can also use online backups including logs to be sure that you can recover your database with just the backup image.
If you have a single-partitioned database, you can use the tool dmdb6bkp to issue an offline backup (forces out any connected application be restarting the database instance, therefore it is not necessary to stop the application servers)
To stop your app server and database you can use thes stopsap script. In the stopdb script you may need to make adjustments to force the database instance stop (the db2stop force command is commented out).
Btw, with DB2 9.5 you can now use online backup include logs also on multi-paritionend DPF databases.
Regards, Jens -
Hey All -
I have the need to monitor one service that exist on 3 servers, but the service only runs on one of the servers at a time, and the servers are not set up as a cluster. Any ideas around how to accomplish this?Hi,
Create a service monitor as previously described and then create a distributed application and add the new service monitor for all servers to a component group. Then set the health rollup to Best state of any member - I think that should work...
Further details around DA's
http://thoughtsonopsmgr.blogspot.co.uk/2011/06/distributed-applications-das-part-ii.html
http://social.technet.microsoft.com/Forums/systemcenter/en-US/9e932038-32c6-4403-8489-1535de4214be/distributed-applications-health-rollup?forum=operationsmanagerauthoring
Hope this helps.. -
How to monitor ADFS 2012r2, Commercial services use HEAD and ADFS returns 500 instead of 200
I have set up an on-prim ADFS and an off-prim ADFS.
I want to use DNS Failover to monitor them and switch off-prim as required.
I've tried both Amazon Route 53 and DNS Made Easy monitoring, and both appear to use the HEAD command rather than the GET command. How can I monitor these services? ADFS 2012r2 does not seem to support the HEAD command.
curl -iX GET h t t p s ://fs.redclay.com/adfs/ls/idpinitiatedsignon.htm returns 200 whereas
curl -iX HEAD ... or curl -I ... return 500 or just hangs forever.
Only by the process of elimination have I come to the conclusion that the HEAD command is being used. I don't know how to sniffer SSL, but both DNSMadeEasy and AmazonAWS say the services are down when I know they are up.Hi,
Would you please be more specific about your requirements?
If you want to figure out how to use curl –iX command, you can refer to the Official Scripting forum below:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
If you have doubts about your third-party software, I suggest you contact third-party support to get accurate answers.
If you just want to monitor your ADFS servers, you can configure performance monitoring as this article guides:
Configure Performance Monitoring
http://technet.microsoft.com/en-us/library/ff627833.aspx
Best Regards,
Amy Wang -
We currently are running Windows 7 in our enterprise environment. Everything works as expected when the user tries to
change their network password via crtl+alt+del, change a password. We are now testing and trying to deploy Windows 8.1 to a test group and are running into an issue when any AD user tries to change their network password. The user can logon to the
PC just fine when the PC is on the domain, however as soon as they go to change their password they are getting the error "There are currently no logon servers available to service the logon request". The end result is that the user can not change
their password. We tried this via connected to the dock with a network cable, on corporate wireless, with a Windows 8.1 machine completely patched over with all Microsoft patches, and a Windows 8.1 machine that is not patched and are running into the same
issue. Has anyone ran into this? Is there something that has to be changed on the infrastructure side?Hi,
Please check the following KB:
Error message when you try to log on to a Windows Server 2008-based RODC: "There are currently no logon servers available to service the logon request"
http://support.microsoft.com/kb/949048
To configure the Password Replication Policy for an RODC, a member of the Domain Admins group is required.
By default, RODC's do not cache any user or computer passwords, neither a user or computer will be able to authenticate. You can however specifiy that their passwords be cached either by including a group or specific user in the Password Replication Policy
on the RODC at the remote site.
RODC - Password Replication Policy and Password Cache Management
http://blogs.dirteam.com/blogs/paulbergson/archive/2010/09/22/rodc-password-replication-group-management.aspx
Password Replication Policy Administration
http://technet.microsoft.com/en-us/library/cc753470(v=ws.10).aspx
For further information about the Windows Server side, I suggest you ask Windows Server forum:
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Karen Hu
TechNet Community Support -
Hi All,
I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template when i select the service which i want to monitor it does not
show all the services in the drop down.
For example - I have Windows audio service which is present on the machine, But it is not showing in the service list.
So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
Below is the screen shot.
Can any one please help.
Gautam.75801Hi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801 -
Hi
i have a sharepoint 2010 farm
and it has total 6 servers, and in all servers i did the latest windows update
and after update i found the sharepoint 2010 administraion service was stopped and when i start its given error message
Log Name: System
Source: Service Control Manager
Date: 7/12/2014 3:01:15 PM
Event ID: 7000
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SPFAPP01.xyz.gov.local
Description:
The SharePoint 2010 Administration service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-07-12T12:01:15.109313700Z" />
<EventRecordID>81462</EventRecordID>
<Correlation />
<Execution ProcessID="576" ThreadID="3372" />
<Channel>System</Channel>
<Computer>SPFAPP01.xyz.gov.local</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">SharePoint 2010 Administration</Data>
<Data Name="param2">%%1053</Data>
</EventData>
</Event>
adilAre you able to run the Config Wizard? Are there any helpful messages in the Application Event Log or in Applications and Services Logs -> Microsoft -> SharePoint Products -> Shared -> Operational?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Message Monitoring and Web services Sequences .. SOAMANAGER
When can I use Mesage Monitoring and Sequence Monitoring .
We are making a proof a concept and we are the following.
1. A program which executes a proxy and with this proxy we are consuming a web services.
2. The proxy and web services were implemented in the same Abap Machine .
3. We execute the test and everything works very well and we consume the webservice and the program displays the expected result.
Now want to know How can we use the Message Monitoring and the Sequence Monitoring . Is this posible ? Do we have to make any previous configuration?
We don´t have any XI installation and for that we wonder if we can monitorize the webservices sequences ?
Any idea about if we can realize such king of actions ..
Many ThanksHi
I assumes u have dual stack.
You can do the sequence monitoring with or without PI. But without PI you would achieve that thing on the local machine.
You have to do those things at Java End using SAP NWA.
Please see this link
http://help.sap.com/saphelp_nwce10/helpdata/en/46/b00c2a99930764e10000000a1553f6/content.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/46/9cb2b57ded371ae10000000a11466f/content.htm -
How to enable servers and services?
Currently when i go to the personalization screen of my publications i get the following msg:
Unable to find servers in CMS and cluster with kind and service
. All such servers could be down or disabled by the administrator. (FWM
01014)
Kindly let me know how to enable the servers and ensure that the corresponding services are runninng?
Thanks,
ArkareportClientDocument = reportAppFactory.openDocument(firstResult, 2, Locale.ENGLISH);
//firstResult from InfoStore
After this line of code i got this error(programme is running for arround 30 min and then throw this exception)
com.crystaldecisions.sdk.occa.managedreports.ras.internal.ManagedRASException: Cannot initialize report application session. --- Unable to connect to the server: SGLFRPTUAT.ReportApplicationServer. - Unable to find servers in CMS MyServer:6400 and cluster @MyServer:6400 with kind rptappserver and service DTSRequestor. All such servers could be down or disabled by the administrator. (FWM 01014)
cause:com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: SGLFRPTUAT.ReportApplicationServer. - Unable to find servers in CMS MyServer:6400 and cluster @MyServer:6400 with kind rptappserver and service DTSRequestor. All such servers could be down or disabled by the administrator. (FWM 01014)---- Error code:-2147217387 Error code name:connectServer
detail: Unable to connect to the server: SGLFRPTUAT.ReportApplicationServer. - Unable to find servers in CMS SGLFRPTUAT:6400 and cluster @SGLFRPTUAT:6400 with kind rptappserver and service DTSRequestor. All such servers could be down or disabled by the administrator. (FWM 01014)
at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source)
at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source)
at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source)
at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source)
at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source)
at com.c2lbiz.symbiosys.components.crystal.CommonLoginCrystal.logon(CommonLoginCrystal.java:83)
at com.c2lbiz.symbiosys.components.crystal.CommonLoginCrystal.main(CommonLoginCrystal.java:46)
Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: SGLFRPTUAT.ReportApplicationServer. - Unable to find servers in CMS MyServer:6400 and cluster @MyServer:6400 with kind rptappserver and service DTSRequestor. All such servers could be down or disabled by the administrator. (FWM 01014)---- Error code:-2147217387 Error code name:connectServer
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
at com.crystaldecisions.sdk.occa.managedreports.ras.internal.CECORBACommunicationAdapter.connect(Unknown Source)
... 6 more
Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$AllServicesDown: Unable to find servers in CMS MyServer:6400 and cluster @MyServer:6400 with kind rptappserver and service DTSRequestor. All such servers could be down or disabled by the administrator. (FWM 01014)
at com.crystaldecisions.enterprise.ocaframework.ServerController.redirectServer(ServerController.java:671)
at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.redirectServer(ServiceMgr.java:1094)
at com.crystaldecisions.enterprise.ocaframework.ManagedSession.redirectServer(ManagedSession.java:352)
at com.crystaldecisions.enterprise.ocaframework.ManagedSession.get(ManagedSession.java:264)
at com.crystaldecisions.enterprise.ocaframework.ManagedSessions.get(ManagedSessions.java:297)
at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(ServiceMgr.java:697)
... 7 more
Please help to resolve this issue.Thanks in advance
Thanks
Jay -
Messages Monitoring and Web Services Sequences .... SOAMANAGER
When can I use Mesage Monitoring and Sequence Monitoring .
We are making a proof a concept and we are the following.
1. A program which executes a proxy and with this proxy we are consuming a web services.
2. The proxy and web services were implemented in the same Abap Machine .
3. We execute the test and everything works very well and we consume the webservice and the program displays the expected result.
Now want to know How can we use the Message Monitoring and the Sequence Monitoring . Is this posible ? Do we have to make any previous configuration?
We don´t have any XI installation and for that we wonder if we can monitorize the webservices sequences ?
Any idea about if we can realize such king of actions ..
Many Thankshi,
short answer: you can't. to my knowledge there is no such thing as message/sequence monitoring outside of PI/XI.
the only thing you can do is to enable debugging and access some debugging info from ST22. other than that you do not have access to the original (XML) message, the HTTP headers or the ST(simple transformation) info or anything else.
regards,
anton -
Error when opening workspace, web analysis and shared services
Hi All,
We installed hyperion 11.1.2, Essbase on a AIX server, with reports etc on a windows 2008 server. when logging onto workspace, web analysis and shared services i get the following error message:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If we re-start the server it sometimes work, but in the morining we have the same issue, can anyone help.
Thanks
DylanHi,
Restart the services. Issue with Oracle Http server. If you restart foundation and other services I can bring workspace up.
Thanks
Radhika -
2nd day w/my ipad2. Have spent 5 hours trying to get my ipod music to play on the ipad..it has been downloaded and synced. When I click on itunes , I get a window that says "Apple mobile device service is not started." I get music symbol when click ipod.
http://support.apple.com/kb/ts1567
Maybe you are looking for
-
Hello friends, I am created a drop shipment order with all the setups done . now i have booked the sale order as source type external. but when i run the workflow background process , after completing the report when i check the sale order line statu
-
Hi.. Is there a compression setting within sequences that will allow RT playback of m2v/mpeg2 files? I am not seeing such a thing... -patrick
-
HELP! BT Home Hub won't stay connected
Hi, was wondering if anyone here could possibly help, please, particularly with interpretation of ADSL Line stats/errors? Trying to cut a v.v. long story short, been using BT Broadband with original BT Home Hub (1.0/1.5?) for approx. 6-7 years with r
-
Please see the question above, as that is the problem I am having. I don't understand why the Bookmarks tab does not show any of the bookmarks which I have tagged. They can only be chosen from the drop down menu. I tried dragging the page to the book
-
Hi friends, I have created one web service , how can i call that web service through ejb . Is this possible ?.. can anybody help me.... Thanks and Regards, Krish