Monitoring template and alert noifications, how ?

I have set up database monitoring template with some metric tresholds for warning/alerting. Also, I applied this to the databases. Now, my question is how will i be notified (say via e-mail) once an alert has generated ? I see notification methods and notification rules, where it has its own metric settings. Do i have to apply notification rules to these databases for notifications. If so, what is the use of monitoring template ? Can i set up notifications via e-mail within the monitoring template ?
thanks,

In EM12c, go to the 'Enterprise' menu, then 'Job', then 'Library'. There should be an out-of-the-box job called "DISABLE TABLESPACE USED (%) ALERTS FOR UNDO AND TEMP TABLESPACES" that you can run against your database targets, and that job will disable database-generated alerts.
If a previous admin has set up EM12c-generated alerts for undo and temp, then yes, a monitoring template will take care of disabling them. Either remove those alerts from the existing monitoring template and apply them to your targets, or create a new monitoring template based on one database's current settings, remove those warning/critical thresholds for your undo and temp tablespaces, and apply it to your targets.

Similar Messages

Setup Customer Templates and Alerting

We are currently have over 75 Oracle 10.2.0.4 test servers, with agents installed and reporting back to our OMS repository. We have been asked to start monitoring tablespace thresholds so that we don't run into outspace issues. What I have done is create a custom monitoring template and pushed it via the agents to the db servers. What I would like to do is remove all the standard oracle alerting, and only have the monitoring template and have it email or page our oncall when needed.
Jim

hi,
Maybe a better approach would have been to look at one of the standard grid control jobs, database availability and critical states. create your own rule as a copy of this, remove all the metrics you do not want. Edit the rule as the SYSTEM or SYSMAN user of grid control. Then make the rule public and then when you log in as a none SYSTEM/SYSMAN user just subscribe youreself to that rule to recive email alerts. This way you keep all the standard rule in tact.
regards
Alan

Diff btwn Monitoring Template and Notification Rules

Can anyone tell me the difference btwn when I should use a Monitoring Template and when I should use Notification Rules? I understand that there is a calendar setup for Notification Rules, but other than that, when should I use which? They look like they do the same thing.

With Monitoring templates, you set them once and apply them to multiple targets across your entire enterprise. So it gvies you a faclity to standardise stuff. For instance, you can create one template each for different database environments (e.g Development, Testing and Production). So each time you discover a new databases, instead of going in to database t manually define new metrics for the lot, you simply apply your already created template to them. Another example advantage is that each time your team decides that all production database tablespaces should change from a Critical of 90% to 85%, you simply change the template and reapply instead of doing it one-by-one on each database.
With Notification Rules, you are choosing the targets and the conditions with which you want to receive notifications. For instance, you have set all your Critical and Warning thresholds for say % Tablespace Space Used. When this threshold is reached, you want to be notified using the notification method you have set. Say via email or sms. So you create a notification rule that includes this metric, specify the notification method and indicate which administrators receive that notification.

Monitoring templates and notification rules

Hello
I was able to create monitoring templates defining the thresholds I needed and create de notifications rules.
Now where can I see them being used ? How can I see the results of a template? Where do the notifications rules publish the information?
Thanks
Gonçalo Ribeiro

Hello,
I want to apply the template to a db instance and I would like to see that information on the db instance home page on the Category alerts.
Can't I do that? The templates only work if I define a notification method?
Thanks
Gonçalo Ribeiro

Monitoring Templates and Rules

Can someone clarify the differences or usage of Monitoring Templates versus Rules.
I believe Monotoring Templates are generated by copying the Metrics and Policies of a single specific targets, adnn then applying that template to other similiar targets.
But how do the Public or My Rules affect or work with Templates.

Hello,
I want to apply the template to a db instance and I would like to see that information on the db instance home page on the Category alerts.
Can't I do that? The templates only work if I define a notification method?
Thanks
Gonçalo Ribeiro

How to exclude UNDO and temp tablespace using monitoring template

hi,
as per MOS note id 816920.1 undo and temp tablespace is excluded from monitoring starting version 11G onwards.It says that thresholds will need to be explicitly set if undo and temp needs to be monitored
we have grid 12C implemented now with monitoring templates which sets thresholds for all tablespaces. does it apply that thresholds to undo and temp too?? we are receiving alerts for undo and temp tablespaces and we wish to disable them. We have undo tablespaces with different names in many databases as per naming conventions for that line of business.
How can i exclude undo and temp tablespaces from monitoring using grid 12C monitoring templates. is there a way through templates where i can set thresholds of permanent tablespaces only???

In EM12c, go to the 'Enterprise' menu, then 'Job', then 'Library'. There should be an out-of-the-box job called "DISABLE TABLESPACE USED (%) ALERTS FOR UNDO AND TEMP TABLESPACES" that you can run against your database targets, and that job will disable database-generated alerts.
If a previous admin has set up EM12c-generated alerts for undo and temp, then yes, a monitoring template will take care of disabling them. Either remove those alerts from the existing monitoring template and apply them to your targets, or create a new monitoring template based on one database's current settings, remove those warning/critical thresholds for your undo and temp tablespaces, and apply it to your targets.

Monitoring Templates Versus Notifications

please correct me if I am wrong, when we set up Notifications, OEM with use the default metrics to send email if errors/warnings occur. what if, I have monitoring templates set up with our own metric, how does this monitoring templates work together with notifications? I guess, my question is how can I assign the monitoring Templates so I can get email based from the metric I assigned.
I am a little confused about how these two worked, if something can give my some insight, I would greatly appreciated.

I generally see monitoring templates and notifications as two separate entities. First evaluate if some of your metrics are better managed as a UDP, user defined policy, than metric. I have templates for production, non-production, hpux, linux, aix, etc. I then apply that template to the corresponding policy for updates or changes in standards. I then would go to preferences and notifications/rules and create a notification rule. I generally create one notification rule per user based on that user's group of clients. That way when someone is out another DBA can cover by simply adding that target to their group.
Hope that answered your question or wasn't too much info. Let me know if you have anything further.
Cheers,

Can I plug a desk top computer into my Idea Centre A310, and if so how?

I have an Idea Centre which has a great screen, but the centre is running so slowly despite my local pc fixer doing his best to clean it up and using an external HD for most files including photos. So I was wonder if I bought a desk top pc only with say 6-8gb RAM and 1TB HD, could I connect this to the centre just to use the monitor only and if so how? I would get my pc fixer guy to transfer all the info I required off the centre to the desk top pc.

Welcome to the Lenovo Community !
I'm not an owner of your model and I could be wrong, but....... Your A310 does have an HDMI IN port which you should be able to use to receive the video signal from another computer that has an HDMI OUT port. The problem I see is the HDMI IN port on the A310 wouldn't be a direct signal to the display. The signal would need to be processed by the A310 before it is displayed on the screen and if you are not happy with the A310 performance I suspect it would effect the display from the second computer as well.
Have you ever had your A310 checked for viruses ? Or was the performance not to your liking since it was new ?
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

How to coonfigure CCMS Alerts and Alert Categories and Alert Rules

How to Configure CCMS Alerts and Alert Categories and Alert Rules....plz give detail description related to these

Hello Raja,
Can save a lot of your valuable time by telling you only about the events/errors you have to take care of.Here all about the Alert monitoring.Below I am giving the weblogs which are beautifully described about CCMS and mail alerts.
follow the weblogs one-by-one.
I hope at the end of this you may get some knowledge on Alerts.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
we configure to Adapter Engine).
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
(This is Important)
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
Please reward points if it is useful...
Thanks,
Satya Kumar

Alert Monitor Threshold and Information, Warning and Alerts

Hi,
I defined a Forecast Alert Profile that is supposed to display the MAPE Alert in the Alert Monitor when the MAPE for the said selection is > x %. This x as I understand is maintained in the Diagnosis group of the Master Forecast Profile.
I now try to make use of this Threshold Value Description "Variance is > %. and define >(x-10) % but less than x % as information, x % as warning and >(x +20) as error but I am unable to make out how the alerts are determined and whether these values are indeed read (threshold >)
Secondly my Alert may have been originally based on particular selection(s)- some in FG, some in BG. Some of these selections may not be assigned to the Alert Profile and the Planner may not remember at what level the forecast was carried out to begin with. So my query is at what level of selection is the Alert generated when there is no selection assigned to the Alert Profile ?
Thanks
Amit

Hi, I was hoping someone answers. It was not a profound question I believe
I am also curious to know the same with respect SDP Macro based alerts. When a Macro Alert is triggered at Cell Val > y % and it is called a "warning" per the macro definition, of what good is the information, warning and alert threshold values in the Alert Monitor ?
Does it mean the value 'Y' that I defined in macro step as 'threshold' for alert or process message can be more 'freely' defined in the alert monitor with three distinct values ? I tried testing but I am unable to conclude.
Please help me understand
Thanks
Amit

Monitoring template for hosts and listeners

I've created a monitoring template through "setup -> monitoring template -> create". Under the "policies" tab I am unable to locate some policies for hosts and listeners such as "Listener.ora Permission" and "Open Ports". However, I can see (under policy rules library) that those policies are applied to all targets by default. How do I add those policies into my monitor template?
I am using 10.2.0.4 OEM grid control repository and agents on Sun Solaris 10.
Thx.

Hi,
The Hyper-V guest can be specific the Memory weight and total number of CPU, please first confirm you have set the proper value for the vm workload.
You can refer the following step by step Hyper-V performance troubleshooting steps set the performance monitor:
Performance Management: Monitoring CPU Resources….
http://blogs.technet.com/b/chrisavis/archive/2013/03/25/performance-management-monitoring-cpu-resources.aspx
Monitoring Hyper-V Performance
http://blogs.msdn.com/b/tvoellm/archive/2009/04/23/monitoring-hyper-v-performance.aspx
Measuring Performance on Hyper-V
http://msdn.microsoft.com/en-us/library/cc768535(v=bts.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to schedule a monitoring template

Hello,
I would like have a different monitoring template depending of batch period and OLTP period, How to schedule monitoring templates ?
Thanks .

That's what I did. I transported two web templates before (contain 1 query only) and they all worked. But just not this new one. Here is the error message:
500 Internal Server Error
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
Details: Full Exception Chain
Messages
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRZI0 and form RSZ_FORM_AND_VAR_TAB_FILL-02- (see long text)

Monitoring and Alerting Infrastructure : Errors raised during Event Calculation

Hello together,
System: Solution Manager 7.1 Sp7
since one day I get this alert every five minute: "Monitoring and Alerting Infrastructure : Errors raised during Event Calculation".
Name....................Errors raised during Event Calculation
Start Time..............20.03.2014 15:12:27 CET
End Time................20.03.2014 15:12:27 CET
Managed Object..........Monitoring and Alerting Infrastructure
Managed Object Type.....Technical Component
Rating..................Red
Category................Exceptions
Status..................Open
Opening the alert shows this:
E2E Alert Analysis Report:
This metric outputs the der Event Calculation Engine (ECE) error messages. The ECE runs by default every minute, under the job name SAP_ALERT_CALCULATION_ENGINE, which then starts the report ACE_CALCULATION_CONTROLLER.
Analyze the error messages in the Application Log, as follows:
Start the transaction SLG1, and enter the object E2E_ALERTING and subobject ENGINE.
When opening trx SLG1 I can see this error:
Aggregate for managed object 00215ACCD6DE1EE2B8FEE39484598162, type
80E0ED08ADA71DEEBFD84650DEF6421F not found.
How can I fix this?
Thank you very much.
Regards,
Ralph

Hi Ralph,
We are facing the same issue is our system. I have checked the specified note and observed that few of the systems had to be updated in Managed System Configuration. I have updated the systems. But, the alerts have not stopped.
Can you please tell me the procedure to resolve this issue?
Thanks.
Regards,
Deepika R

I want to download an invoice template. How can I then fill in the template and place in a file?

I want to download a template of an invoice. How can I then fill in the template and create a separate file?

template in Word format? Excel? PDF? a little more information please.

I have Pages 09. I have created custom templates and want to delete them. How do I delete a template I have created in Pages 09?

I have Pages 09. I have created custom templates and want to delete them. How do I delete a template I have created in Pages 09?

Pages stores those you created & saved as templates in (your account) > Library > Application Support > iWork > Pages > Templates > My Templates. The door to the user's Library is hidden in Lion but it is easy to open. In Finder, hold down the Option key while clicking on the Go menu & your users Library will appear about halfway down the list.

Monitoring template and alert noifications, how ?

Similar Messages

Maybe you are looking for