Monitoring Template

I created a monitoring template specifying some metric thresholds I need to monitor. Then I selected apply from the options and from the Add button I added a target to the template I created.
How can I check in the future that the particular target is associated with some X monitoring template? I couldn't see any target information saved from the monitoring template.
"Where can I check that the moniting template is holding the below targets?"

Hi,
Just to add to this, the template apply operation does apply the monitoring settings from the template to the target. However, there is no further association with the template and the target, e.g., if the template is later changed, you will have to manually re-apply the template to the target again.
If you want a real association with a template to a target such that if there is any change in the template, these changes are automatically applied to the target, then in EM12c, this can be done using administration groups and template collections. Check out the chapter on Administration groups in the EM Cloud Control Administrator's Guide 12c.
regards,
Ana

Similar Messages

Managing Monitoring Templates Based on Target Properties (not Administration Groups)

I understand how to create administration groups, based on a hierarchy of target properties. In addition, I've assigned monitoring templates to these various groups with limited success.
But I would like to be able to setup different monitoring templates, metric values, compliance configuration, etc based on the target properties themselves and not just the hierarchy.
For example, lets say I have a hierarchy of administration groups starting with "Cost Center" at the top and "Location" as the next level. Now, I want to set up some compliance rules based on Operating Systems and want to do this across all my systems, regardless of administration group. (ie all Solaris 10 machines setup one way, Solaris 11 machines another).
Can I do this?

does your RCDC info look something like the following?
<my:Control
my:Name="GroupMemberOfSG"
my:TypeName="UocListView"
my:ExpandArea="true"
my:Caption="Security Groups"
my:RightsLevel="{Binding Source=rights,
Path=isAdminAccount}">
<my:Properties>
<my:Property
my:Name="ColumnsToDisplay"
my:Value="DisplayName,Email,Domain,DisplayedOwner"
/>
<my:Property
my:Name="EmptyResultText"
my:Value="There are no groups according to the filter definition." />
<my:Property
my:Name="PageSize"
my:Value="20" />
<my:Property
my:Name="ShowTitleBar"
my:Value="true" />
<my:Property
my:Name="ShowActionBar"
my:Value="false" />
<my:Property
my:Name="ShowPreview"
my:Value="false" />
<my:Property
my:Name="ShowSearchControl"
my:Value="false" />
<my:Property
my:Name="EnableSelection"
my:Value="false" />
<my:Property
my:Name="SingleSelection"
my:Value="false" />
<my:Property
my:Name="ItemClickBehavior"
my:Value="
ModelessDialog " />
<my:Property
my:Name="ListFilter"
my:Value="/Group[(Type='Security') and ((ComputedMember='%ObjectID%')
or (ExplicitMember='%ObjectID%'))]"
/>
</my:Properties>
</my:Control>
</my:Grouping>
Anthony Marsiglia

Cannot see CCMS Monitor Templates - System is not configured

I just finished installing SAP Netweaver Trial, and I have been able to login using the SAP* and DDIC accounts.
I can see the standard tree via the SAP client GUI.
I am trying to take a look at the CCMS Monitor Sets, and I can see the standard collection of "Entire System", "Performance Overview", etc. all fine.
However, when I double-click to load any of the monitors, I see nothing inside.
No sub-trees, nothing.
I enabled "Display error nodes" and see a node that says
"NSP : System is not configured"
I have tried creating my own user, adding in profiles like SAP_ALL, S_A.System, etc.
I also notice everytime I access the CCMS Monitor Templates, there is an entry in the Syslog:
Severity: Warning
Process Type: D0
Transaction Code: RZ20
Client: 001
User: DDIC
Message ID: BYE
Description:
Database: Invalid parameter ObjTooLar transferred to database interface
Please let me know if I am missing any components, or if there is something I need to do.
Thank you.

Thanks Sunny.
That thread did indeed helped me to resolve the issue.
However, the thread did not really provide clear instructions to complete newbies like me.
For those who also have the same issue, this is what I did:
1. Execute RZ10 (Edit Profiles) via the SAP client GUI
2. Click on the menu Utilities - Import profiles - Of active servers
3. Edit the "Instance Profile" NSP_DVEBMGS00_{Your Computer Name}
Select Extended Maintenance, and select Change
4. Change the following two parameters:
alert/MONI_SEGM_SIZE from 0 to 60000000
rdisp/autoabaptime from 0 to 300
5. In the SAP MMC, right-click on NSP and select Restart
6. After restarting, login and you should be able to see the CCMS Monitor Template nodes

How to exclude UNDO and temp tablespace using monitoring template

hi,
as per MOS note id 816920.1 undo and temp tablespace is excluded from monitoring starting version 11G onwards.It says that thresholds will need to be explicitly set if undo and temp needs to be monitored
we have grid 12C implemented now with monitoring templates which sets thresholds for all tablespaces. does it apply that thresholds to undo and temp too?? we are receiving alerts for undo and temp tablespaces and we wish to disable them. We have undo tablespaces with different names in many databases as per naming conventions for that line of business.
How can i exclude undo and temp tablespaces from monitoring using grid 12C monitoring templates. is there a way through templates where i can set thresholds of permanent tablespaces only???

In EM12c, go to the 'Enterprise' menu, then 'Job', then 'Library'. There should be an out-of-the-box job called "DISABLE TABLESPACE USED (%) ALERTS FOR UNDO AND TEMP TABLESPACES" that you can run against your database targets, and that job will disable database-generated alerts.
If a previous admin has set up EM12c-generated alerts for undo and temp, then yes, a monitoring template will take care of disabling them. Either remove those alerts from the existing monitoring template and apply them to your targets, or create a new monitoring template based on one database's current settings, remove those warning/critical thresholds for your undo and temp tablespaces, and apply it to your targets.

MAI monitoring templates vanished (SolMan 7.1 SP10)

Hello all,
it seems like almost all of our MAI monitoring templates have vanished in our SolMan 7.1 SP10 system.
I still get the traingles were templates existed, but when expanding on them the won't Show up.
I updated SAP Service Content yesterday and SAP Monitoring Content today to the latest version.
I'm nor sure if this really caused the trouble.
Does any of you ever have experienced something similiar?
Best Regards,
Thorsten

Hello,
the question was answered by SAP Support.
One has to be logged on in the language in which the templates were created / maintained.
I switched from German to English last week, so that's the reason why.
Regards,
Thorsten

Monitoring templates and notification rules

Hello
I was able to create monitoring templates defining the thresholds I needed and create de notifications rules.
Now where can I see them being used ? How can I see the results of a template? Where do the notifications rules publish the information?
Thanks
Gonçalo Ribeiro

Hello,
I want to apply the template to a db instance and I would like to see that information on the db instance home page on the Category alerts.
Can't I do that? The templates only work if I define a notification method?
Thanks
Gonçalo Ribeiro

Monitoring template and alert noifications, how ?

I have set up database monitoring template with some metric tresholds for warning/alerting. Also, I applied this to the databases. Now, my question is how will i be notified (say via e-mail) once an alert has generated ? I see notification methods and notification rules, where it has its own metric settings. Do i have to apply notification rules to these databases for notifications. If so, what is the use of monitoring template ? Can i set up notifications via e-mail within the monitoring template ?
thanks,

In EM12c, go to the 'Enterprise' menu, then 'Job', then 'Library'. There should be an out-of-the-box job called "DISABLE TABLESPACE USED (%) ALERTS FOR UNDO AND TEMP TABLESPACES" that you can run against your database targets, and that job will disable database-generated alerts.
If a previous admin has set up EM12c-generated alerts for undo and temp, then yes, a monitoring template will take care of disabling them. Either remove those alerts from the existing monitoring template and apply them to your targets, or create a new monitoring template based on one database's current settings, remove those warning/critical thresholds for your undo and temp tablespaces, and apply it to your targets.

Data missing under J2ee monitor templates in RZ20

Hi,
We are trying to setup Central monitoring from solman,registered ccm4x and ccmsr agents poining to SOLMAN,
The J2EE monitor template does not show data related to "APPLICATINS" "LOG FILES",it is blank locally ,Is anything else required for getting the data.
Both solman and satellite system are on EHP1

Hi,
You could try the following SAP note for that:
1081694 - CCMS: Local system missing from "SAP J2EE Monitor Templates
You should also check that you are using the latest SAPCCMSR and also the latest libjmon library. See the SAP notes:
1453112 - CCMS agent and kernel: patches 2010
1033491 - CCMS monitoring for AS Java (NetWeaver2004s, 7.00)
902460 - CCMS: Agent does not display any J2EE data in RZ20

Oracle - CCMS Monitor Templates

Hi,
In RZ20, The Oracle (Tablespaces) monitor templates are not available under Database.
And the MTE class CCMS_DB_mcmtc is not there in the list.
How to Maintain the data for this MTE class. Is it possible to create new MTE class.?
Please Advice.
Thanks in Advance
Arun
Edited by: ARUN PARAMASIVAM on Feb 2, 2010 12:14 PM

Hi Anil,
Thanks for your quick response.
Oracle Database Alert should be there by default under Database Alert Monitor right. But i am not able to find the Oracle Monitor Set Itself.
I tried by running the program "RSDBMON0" in SE38. That also doen't help.
Please advise on how to get the Oracle monitor set under Database.
Thanks
Arun

Monitoring template for hosts and listeners

I've created a monitoring template through "setup -> monitoring template -> create". Under the "policies" tab I am unable to locate some policies for hosts and listeners such as "Listener.ora Permission" and "Open Ports". However, I can see (under policy rules library) that those policies are applied to all targets by default. How do I add those policies into my monitor template?
I am using 10.2.0.4 OEM grid control repository and agents on Sun Solaris 10.
Thx.

Hi,
The Hyper-V guest can be specific the Memory weight and total number of CPU, please first confirm you have set the proper value for the vm workload.
You can refer the following step by step Hyper-V performance troubleshooting steps set the performance monitor:
Performance Management: Monitoring CPU Resources….
http://blogs.technet.com/b/chrisavis/archive/2013/03/25/performance-management-monitoring-cpu-resources.aspx
Monitoring Hyper-V Performance
http://blogs.msdn.com/b/tvoellm/archive/2009/04/23/monitoring-hyper-v-performance.aspx
Measuring Performance on Hyper-V
http://msdn.microsoft.com/en-us/library/cc768535(v=bts.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

System monitoring templates for SP11

Dear colleagues,
could anyone please to share system monitoring templates for SP11 like as http://wiki.scn.sap.com/wiki/display/TechOps/SysMon_SupportedProducts?
Thanks a lot,
Alexander

Dear Roland,
Is it possible to get it for documentation purposes in any way now? For example, export it out of the existing system.
With best regards,
Alexander

How to schedule a monitoring template

Hello,
I would like have a different monitoring template depending of batch period and OLTP period, How to schedule monitoring templates ?
Thanks .

That's what I did. I transported two web templates before (contain 1 query only) and they all worked. But just not this new one. Here is the error message:
500 Internal Server Error
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
Details: Full Exception Chain
Messages
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRZI0 and form RSZ_FORM_AND_VAR_TAB_FILL-02- (see long text)

Monitoring Template Creation question

Hello,
I have created a Monitoring Template (T1) by performing a "Create Like" of the Standard Oracle Database Instance template. Unfortunately the Standard Oracle Database Instance template does not have all of the metrics that I need to check.
Is there a way to create a Monitoring Template based on "All Metrics" for the DB Instance? (It appears that I can only create a monitoring template based on a target database)
If not, how can I pick a particular metric from the "All Metrics" list and add it to a template?
Thanks,
Bob Larsen

When creating a Template based on a Target, you actually wll get all available metrics. You could also use the Oracle proved template to copy from.
You should realize that when looking at All Metrics, several of these metrics are "Non threasholdable" meaning that you simple can not set a threshold value.
Regards
Rob
http://oemgc.wordpress.com

Monitoring Templates

Is it possible to scheduke monitoring templates across the targets?
For eg, default value for is 85 and 90% and that will run every after 15 minutes, I wanted to schedule at 80 and 95% and it shoud run at every after 2 hrs? How we can do that by creating monitoring templates?

goto OEM - setup -> Monitoring Templates - create copy of monitoring from some target and click on shedule - you can change params of shedule
I think it helps you some

Monitoring Templates and Rules

Can someone clarify the differences or usage of Monitoring Templates versus Rules.
I believe Monotoring Templates are generated by copying the Metrics and Policies of a single specific targets, adnn then applying that template to other similiar targets.
But how do the Public or My Rules affect or work with Templates.

Hello,
I want to apply the template to a db instance and I would like to see that information on the db instance home page on the Category alerts.
Can't I do that? The templates only work if I define a notification method?
Thanks
Gonçalo Ribeiro

Monitoring Template

Similar Messages

Maybe you are looking for