Monitoring the idoc

hi...
how can we monitor the idoc in XI.
thanks
Vishnu

Hi vishnu sreenu ,
Go thru these websites for IDoc monitoring :
Mastering IDoc Business Scenarios with SAP® XI
http://www.sap-hefte.de/download/dateien/1156/100_leseprobe.pdf
A Beginners Guide to SAP XI Settings, Part I
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
cheers!
gyanaraj
reward points if u find this helpful

Similar Messages

Unable not find the monitoring object(idoc monitoring ) in BPmon

Hello Guys,
     As part configuration of IDOC monitoring in BPmon configuration ,while i am creating monitoring object for IDOC monitoring (solman_workcenter->Business process operations ->setup Business process monitoring -->selected the solution --> business scenarios -->
As mentioned above i could not able to find the IDOC monitoring template in the droup down list
Components level on manage system:-
ST-PI       2008_1_710 SP 08
ST-A/PI   01Q_731 SP2
I have done the load monitoring definition by selecting respective local component and clicked on load monitoring definitions
Please help me on resolving the issue.
Regards,
Pavan

Hello Calvin van der Walt,
Please upgrade ST-PI & ST-A/PI component to latest level.I resolved my issue by doing ST-PI & ST-A/PI component upgarde.
I had raised an OSS message eith SAP on this isssue and SAP has asked us for ST-PI & ST-A/PI component upgarde.
So please go with ST-PI & ST-A/PI component upgarde it will resolve your issue.
Regards,
Pavan

Automate the Idoc monitoring process

Hi,
As we do not use Solution Manager to monitor Idocs in R/3 system, we need to develop the customized report which will send a mail alert with the Idoc status on daily basis. Please suggest various effective approaches to develop this scenario.
Thanks.
Moderator message: please do some own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 2:02 PM

There are some standard reports which are already available. I could find a report RSEIDOCA, this sends mail based on the workflow. Please check if this is useful or it can be extended to meet your requirement.
Regards
Ranganath

CONF21 Inbound Idoc - How to Monitor the Error

I have just set up the idoc conf21 - and everything works perfectly well (I ticked "immediate update" via CI41 in order to avoid using CIP2).
I have simulated an error in the ILE01 unit of measurement I putted 'XXX'.
I launched the idoc via we19 and the idoc appears in status 53 green. ( This is normal because the status 53 represents only the fact that function module KK2A_GET_DATA_FROM_IDOC has runned without errors. It does not report errors possibly occuring in PROCESS_CC2_MESSAGES_PARALLEL.)
Obviously due to the 'XXX' the confirmation did not happen. The record disappeared from the table RUECK.
Question : How can I monitor this type of error ?
Thanks
Philippe

Go to CO16
reprocess - change the *** in unit of measurement to H
back - the line shoulb be green now
save
and up this is it !

IP Job in BW finished, but how can I check the IDoc receive status in BW ?

Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?

Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks,

View the Idocs in Source System

Hello
I have triggered a ino package load to BI. Now the job is just hanging and is not bringing in any data. Please can someone tell me where can i view these idocs in the source system.
Thanks

Hi
IDocs at Source system --BD87 / WE19/WE20/WE30/WE02 are the Tcodes for IDOCs
Till42 Outbound Idocs after 50 Inbound Status Idocs.
You can even see the Idocs at Info Package -- Monitoring -- Environment - Idocs at Source system.
Check your RFC at SM58/SM59 -- If the Queue Stuck -- Execute LUWs Manually.
When the IDOCs are Taking time to process it is always better to Make the yellow request to Red and Delte the Request and Go for Repeat .
Hope it helps

BPM Monitoring of IDOCs

Hello all,
I have a scenario with 100 IDOCs and I map the IDOCs in ccBPM. But if somehow a mapping process for one of the IDOCs in ccBPM goes wrong you get an error (a red flag) for all of the other 99 IDOCs.
My question is then how can we monitor which and why the IDOC went wrong without opening all of the IDOCs?
I have tried SXMB_MONI --> Process --> PE --> Technical details
But I havent found my solution.
Has anyone any suggestion?
Kind Regards,
Kamran Vakili

I checked this, It's not a solution when error's occur in the transformation step (mapping).
I have the same problem. I guess there is no solution for monitoring BPM when messages go wrong.
Anyone an idea? The only error you get from BPM when transformations goes wrong is:
com/sap/xi/tf/_mm_IDOC_Orders05_naar_Orderbestand~
com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRu
ntimeException in Message-Mapping transformatio~
Regards,
Luc
Found the solution:
Go to technical details -> scroll down to bottom -> double click on show container -> Double click on TRACE -> Double click on Value under Object Type (in my cause CL) -> Now you see what went wrong in the message and which message went wrong.
Message was edited by:
TPG TPG SAP CCC - Pink Roccade
Message was edited by:
TPG TPG SAP CCC - Pink Roccade

Searching Message ID in XI using the IDOC number produced in S1P

Hi Everyone,
I'm a sap XI newbee and i have a question.
The scenario is like this, We have a message ID (PO) that passes thru XI from a 3PLP(3rd party system) which eventually produces an IDOC when it reaches S1P(R/3).
Message flow: 3PLP - XI - S1P.
So in S1P(R/3)'s perspective, the IDOC is INBOUND and its supposed to display the message ID from XI in the DETAILS TAB (tCode:WE02) unfortunately it did not.
So how would I be able to find the message ID in XI using the IDOC produced in S1P.
I hope you get my point.
PS: tcode IDX5 wont work since the IDOC was only produced as soon as it reaches S1P(R/3).
Thank you so much,
XI Monitor

You have to search for the IDOC from IDX5 in your XI system...
Also please check the following OSS note : Note 1083694 - IDoc adapter: IDX5 and IDoc tracking
No object relationship is written in step 2.
No object relationship is displayed in the IDoc monitor (transaction WE02) in the receiver system.
Note that object relationships are written for logical systems only (partner type = "LS").
For more information, see Note 428344.
In transaction WENOLINKS, check whether the administrator has deactivated the object relationships.
If everything is maintained, you should see the Sender idoc number(PI) in BD87...
One of the roundabout ways till you fix the issues is to get the timestamp when IDOC was created and go to SXMB_MONI or IDX5 in PI for that timestamp to get the message id

Monitoring receiver idoc communication channel

Hi All
I have an idoc to idoc scenario.
I am unable to see my receiving idoc communication channel in communication channel monitoring of RWB. It is not available in the dropdown list.
I want to have a look at the audit log to see if the idoc is delivered to the receiving system.
How can i monitor receiver idoc communication channel?
How can i ensure that the idoc is delivered to the receiving system?
In sxmb_moni, status is checkered flag.
Many Thanks
Chandra Sekhar

Hi,
IDOC is on ABAP stack hence u can not monitor IDOC.
For testing purpose
1) GO to SXMB_MONI check the status of message.
2) Go to R3 and enter Tcode WE02 and check the IDOC which is send from XI. enter the idoc name and see the status of IDOC it should be in green status if it is posted successful or else see the status record for checking the error message.
chirag

Monitoring of IDOC

Hello all,
I try tu have a good monitoring of IDOC.
To be clear, I will explain the problem.
We use the IDOC HRMD_ABA for the replication sap HR towards an other system CRM.
Sometimes we have some IDOC not in error but not fully posted status 52 (via transaction BD87).
The problem is : the message is not fully clear I don't know on which segment I got the error. I would like to add more information to the message, I look on customer function but I found no appropriate function => I told me why not to copy the function module [IDOC_INPUT_HRMD] for the IDOC's post into a [ZIDOC_INPUT_HRMD] function module and to manage better the message error but it looks a heavy work.
Anybody has a better idea to realise that ?
I try also to read the table EDIDS and EDID4 but the information was not helpfull.
Thank you very much in advance, Gene.

Hi Genevieve,
Yes there is a better (and much easier) way.
Go to the customer exit 002 for this specific function.
Function module = EXIT_SAPLRHA0_002.
Inside you will find: INCLUDE ZXHALU06 .
Double click on ZXHALU06 (and if it does not exist, create it by answering Yes on the create dialog).
Then simply use your coding to investigate the results and/or extend the message.
This customer exit is meant for monitoring workflow functions for this IDoc handler.
However, to copy IDOC_INPUT_HRMD to your own ZIDOC_INPUT_HRMD and extend this is not so very much work. You only need to find out with which partner the communication occurs (e.q. EDIDC-SNDPRN field).
Find this partner in transaction WE20. Indise the transaction find the message in the inbound parameters.
Double-click the partner and go to the Process code field.
Double-click the process code field and you will see that with the identification the function module IDOC_INPUT_HRMD is given.
Press the button behind the identification field and remember all fields from that screen.
Once you have copied to ZIDOC_INPUT_HRMD you can replace the identification with your function module and fill in the related fields (that you did remember).
Hope this gives you a good start.
Regards,
Rob.

How to see the IDOC structure in XML format

Hi, I am ver new to MII. I configured connection between SAPand SAP MII and IDOC is triggering in SAP MII. I can see the idoc triggered in Message monitor.
Now my query is how to see the IDOC structure in XML format? I written a transaction where I am assigning transaction.xml to my Local.xml and trying to display with message action block. When I display the message I am getting message as below
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
There is no data in the xml, but in SAP side i seen data and segment which sent to MII as a IDOC. Please help me how to resolve this issue.

Hi, Thanks for quick response.
In Message monitor I seen the IDOC list after executing POIT transaction code in SAP.
But the display button is disabled always in message monitor screen. I want to take this IDOC and save it in my SQL database. So I want to see this IDOC structure in XML format. Where i can see this structure?

Error oocuring after posting the IDOC

Hi
i am getting a error in a scenario
the scenario is Idoc to file. when we post the IDoc, its getting posted successfully. but the pipiline is getting failed at the inbound message when monitoring in SXMB_MONI.
i am getting the following error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIAdapter</SAP:Category><SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_NO_REQUEST</SAP:Code>
<SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/>
<SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack>ALEAUDIT IDoc cannot find request IDoc in Integration Server
</SAP:Stack><SAP:Retry>N</SAP:Retry></SAP:Error>
all the experts help me out in solving this issue

Hi Deepika,
their might be some problems with ur ALE settings.
Here is a detail of the steps to be followed.
Do verify whether u have done the steps or repeat the steps as stated:
Steps for ALE settings:-
Steps for XI
Step 1)
 Goto SM59.
 Create new RFC destination of type 3(Abap connection).
 Give a suitable name and description.
 Give the Ip address of the R3 system.
 Give the system number.
 Give the gateway host name and gateway service (3300 + system number).
 Go to the logon security tab.
 Give the lang, client, username and password.
 Test connection and remote logon.
Step 2)
 Goto IDX1.
 Create a new port.
 Give the port name.
 Give the client number for the R3 system.
 Select the created Rfc Destination.
Step 3)
 Goto IDX2
 Create a new Meta data.
 Give the Idoc type.
 Select the created port.
Steps for R3.
Step 1)
 Goto SM59.
 Create new RFC destination of type 3(Abap connection).
 Give a suitable name and description.
 Give the Ip address of the XI system.
 Give the system number.
 Give the gateway host name and gateway service (3300 + system number).
 Go to the logon security tab.
 Give the lang, client, username and password.
 Test connection and remote logon.
Step 2)
 Goto WE21.
 Create a port under transactional RFC.(R3->XI)
 Designate the RFC destination created in prev step.
Step 3)
 Goto SALE.
 Basic settings->Logical Systems->Define logical system.
 Create two logical systems(one for XI and the other for R3)
 Basic settings->Logical Systems->Assign logical system.
 Assign the R3 logical system to respective client.
Step 4)
 Goto WE20.
 Partner type LS.
 Create two partner profile(one for XI the other for R3).
 Give the outbound or inbound message type based on the direction.
Step 5)
 Goto WE19
 Give the basic type and execute.
 fill in the required fields.
 Goto IDOC->edit control records.
 Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
 Click outbound processing.
Step 6)
 Go to SM58
 if there are any messages then there is some error in execution.
 Goto WE02.
 Check the status of the IDOC.
 Goto WE47.
 TO decode the status code.
Step 7)
 Not mandatory.
 Goto BD64.
 Click on Create model view.
 Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)

Transaction Code to VIEW the IDOC's in XI

Hi Guys,
I had configured the Partner Profile in R/3 and triggered the IDOC's to XI. I havent configured the scenario in IR or ID yet. Since i had triggered the IDOC's from R/3 and they show successful,which transaction should i use in XI to check whether the IDOC's had reached the XI system Succesfully or not.
Thanks,
KC.

Hi Kittu
Have a look at this blog, it has all TCodes.
/people/morten.wittrock/blog/2006/03/23/getting-started-with-xi-part-1-xi-30-cheat-sheet
Here it goes~
SXMB_IFR-- launch integration builder/ Repository/configuration/SLD ( XI HomePage)
Proxy Generation
SPROXY--Proxy generation
Monitering features:
SXMB_MONI-- monitering of messages
SXI_MONITOR - monitoring Processed Messages
SXMB_MONI_BPE--Business process monitering
Alerts:
ALRTCATDEF- To configure Alert Category
Adminsitration of XI
sxmb_adm-- Administration
QUEUE MONITORING
SMQ1 Outbound queue
SMQ2 Inbound Queue
IDoc's& RFC's related
IDX1- Port Configuration
IDX2 - for IDoc meta data
SM58--RFC error Log
SM59 - RFC Destination
IDX5 - Idoc Monitor
Others
SWELS---Event trace switching on and off.
SXI_MAPPING_TEST To test mappings
SXI_CACHE To check directory cache
To get the cache information For Adapters- go to SXI_CACHE
Hope this helps
Thanks
Abhishek

Error in processing the idoc

hi,
i modelled a idoc-jdbc scenario and relased an idoc from the r/3 system......but in the message monitoring of the runtimework bench i see an error....the details of the error are as follows
Service cannot be reached
What has happened?
URL http://hwsapxi:50000/sap/bc/gui/sap/its/webgui/! call was terminated because the corresponding service is not available.
Note
The termination occurred in system XIS with error code 403 and for the reason Forbidden.
The selected virtual host was 0.
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:hwsapxi_XIS_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
what does this mean.....
also in component monitoring of the rwb i see another error for my sender component like following
You cannot log on to system TASL_MATERIAL_IDOC_SENDER with user XIRWBUSER
Last Retry Tue Jan 31 13:46:33 IST 2006
please help me..i am unable to understand this....
thanks
pavan

Hi Anirbhan,
thanx for ur reply
i am not using any URL to end the message to XI..
i am sending the idoc from the SAP R-3 system to the XI system
And abt the URL that u gave, what is it used for..?
please tell me abt it..
Thirdly, check the authorization of XIRWBUSER
How and where can i check it authorization
also in the TCODE IDX5 in the XI system i saw the following message for the failed idoc..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP status code401 Unauthorized</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An error occurred when refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

please tell me where did i go wrong
thanks
pavan

Error while monitoring the Info Package

Hi,
While monitoring the info package, I'm having the following errors:(The data source is of type standard R3 Datasource).
" Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get. "
pls help me in this...
With regards,
Yokesh.

Hi Yokesh,
Try these to solve your issue,
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
OR
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Hope it helps
Regards,
Arun.M.D

Monitoring the idoc

Similar Messages

Maybe you are looking for