Monitoring the process chain

HI
BI DEVOLOPERS
Am having a problem in the process chain ....
That means how can i know the today scheduling process chains please any one can help me.

For the process chain we have 3 important transactions .
1. RSPC - log view for runs of a process chain.
2. RSPC1 - process chain maintenance for a given process chain
3. RSPCM - Monitoring of daily process chains
4. Check whether you have access to tcode - ST13 .
Its a very handy transaction for BW monitoring .
For the process chains .
ST13 -> Enter tool name as 'BW-Tools' -> Execute
Select the radio button Process Chain analysis and execute .
Over here clicking on the corresponding tabs gives you further information.
Check fout for ST13 as this tcode is available only after installing some support packages .
Hope this information would be helpful to you .
Regards .
Lokesh

Similar Messages

Error while executing the Process chain

Hi Friends,
The process chain that I scheduled is getting failed at the Infopackage loading stage.
On checking the diplay message, I found the following log:
Cannot stage requested data for datasource
Error in source system
I activated the datasource in source system, then replicated the same and tried to load data.
But the issue remains the same.
I checked in RSA7. The status corresponding to this datasource is in yellow status.
Can I delete this entry and try again?
Please suggest.
Thanks in advance.
Surjit P

Hi,
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Deadlock
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
Dead Locks
2. Error in unit conversion
Units of measure
3.Error 1 in update
When Src file is already open or not accessible.
4.Processing no data
theres no data selected after extraction
5.Caller 70 missing
" This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
1) Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
6) It is a system error which can be seen under
the Status tab in the Job Over View.
solution:
" If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
6.Idoc not processed completely.
Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction
Contact the BASIS administrator to push the IDOC.
look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Majority of the issues will be based on these things only..
Hope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope this helps.
pls award me some points
thanks.
Thanks

Monitoring BI PROCESS CHAIN with Solution Manager BPMON

Hello,
I'm trying to setup the monitoring of BI process chain using the BPMON
I setup the process chain monitoring using BPmon application monitoring "BI Process Chain Monitoring" (BOBIPCMO)
but than I'm not able to read the process chain names,steps,and variant from satellite system
On other systems,using different application monitor (like PI MONITOR) is working fine
i'm using the latest plug-in ST-A/PI 01L_BCO700 on entire landscape
My bi system is 7.01 EHP1 sp4
solution Manager is 7.01 EHP1 SP20
Any suggestiions?
Thanks
Marco

Hello Marco,
the problem is that the Process Chain monitor is not yet available with ST-A/PI 01L*. Unfortunately the empty hull that you see during the setup was shipped without the proper content. The Process Chain monitor will be properly shipped with the next ST-PI and ST-A/PI combination in Q2/2010.
Sorry for any inconvenience caused.
If you want to have this monitor earlier on it could be implemented via Customer Exit in case that you have some MaxAttention or Safeguarding engagement.
Best Regards
Volker

Authorizations setting for running the process chain

Hai
Iam planning to run the process chain for loading the data into ODS. But i dont have authorization for it.
so what are the authorizations i need to run the process chain in my system. And how can i set all those authorizations to my user-id. I have all authorization rights .
Pls let me knw
kumar

Hi,
Authorizations for Process Chains
Use
You use authorization checks in process chain maintenance to lock the process chain, and the processes of the chain, against actions by unauthorized users.
·        You control whether a user is allowed to perform specific activities.
·        You control whether a user is allowed to schedule the processes in a chain.
The authorization check for the processes in a chain runs when the system performs the check. This takes place upon scheduling or during synchronous execution. The check is performed in display mode. The check is performed for each user that schedules the chain; it is not performed for the user who executes the chain. The user who executes the chain is usually the BI background user. The BI background user automatically has the required authorizations for executing all BI process types. In attribute maintenance for the process chain, you can determine the user who is to execute the process chain.
See also: Display/Maintenance of Process Chain Attributes ® Execution User.
Features
For the administration processes that are bundled in a process chain, you require authorization for authorization object S_RS_ADMWB.
To work with process chains, you require authorization for authorization object S_RS_PC. You use this authorization object to determine whether process chains can be displayed, changed or executed, and whether logs can be deleted. You can use the name of the process chain as the basis for the restriction, or restrict authorizations to chains using the application components to which they are assigned.
Display/Maintain Process Chain Attributes
Use
You can display technical attributes, display or create documentation for a process chain, and determine the response of process chains during execution.
Features
You can display or maintain the following attributes for a process chain:
Process Chain ® Attribute ® ...
Information
Description
( Rename)
You can change the name of the process chain.
Display Components
Display components are the evaluation criterion in the process chain maintenance. Assigning the process chains to display components makes it easier to access the chain you want.
To create a new display component, choose Assign Display Components in the input help window and assign a technical name and description for the display component in the Display Grouping dialog box that appears.
Documents
You can create and display documents for a process chain.
For more information, see Documents.
Last Changed By
Displays the technical attributes of the process chain:
·        When it was last changed and who by
·        When it was last activated and who by
·        Object directory entry
Evaluation of Process Status
If you set this indicator, all the incorrect processes in this chain and in the overall status of the run are evaluated as successful; if you have scheduled a successor process upon error or always.
The indicator is relevant when using metachains: Errors in the processes of the subchains can be evaluated as unimportant for the metachain run. The subchain is evaluated as successful, despite errors in such processes of the subchain. If, in the metachain, the successor of the subchain is scheduled upon success, the metachain run continues despite errors in unimportant processes of the subchain.
Mailing and alerting are not affected by this indicator and are still triggered for incorrect processes if they have an upon error successor.
Polling Indicator
With this indicator you can control the response of the main process for distributed processes. Distributed processes, such as the load process, are characterized as having different work processes involved in specific tasks.
With the polling indicator you determine whether the main process needs to be kept until the actual process has ended.
By selecting the indicator:
-         A high level of process security is guaranteed, and
-         External scheduling tools can be provided with the status of the distributed processes.
However, the system uses more resources; and a background process is required.
Monitoring
With the indicator in the dialog box Remove Chain from Automatic Monitoring?, you can specify that a process chain be removed from the automatic monitoring using CCMS.
By default CCMS switches on the automatic process chain monitoring.
For more information about the CCMS context Process Chains, see the section BW Monitor in CCMS.
Alerting
You can send alerts using alert management when errors occur in a process chain.
For more information, see Send Alerts for Process Chains.
Background Server
You can specify here on which server or server group all of the jobs of a chain are scheduled. If you do not make an entry, the background management distributes the jobs between the available servers.
Processing Client
If you use process chains in a client-dependent application, you can determine here in which client the chain is to be used. You can only display, edit, schedule or execute the chain in this client.
If you do not maintain this attribute, you can display, edit, schedule or execute the process chain in all clients.
Process variants of type General Services that are contained in a process chain with this attribute set will only be displayed in the specified client.
This attribute is transported. You can change it by specifying an import client during import. You must create a destination to the client set here in the target system for the import post processing (transaction RSTPRFC) The chain is activated after import and scheduled, if necessary, in this client.
Execution User
In the standard setting a BI background user executes the process chain (BWREMOTE).
You can change the default setting so that you can see the user that executes the process chain and therefore the processes, in the Job Overview. You can select the current dialog user who schedules the process chain job, or specify a different user.
The setting is transported.
The BI background user has all the necessary authorizations to execute all BI process types. Other users must assign themselves these authorizations so that authorization errors do not occur during processing.
Job Priority
You use this attribute to set the job priority for all of the jobs in a process chain.
Hareesh

Process Monitoring: Monitor BI Process Chains

Hello,
does someone know how to monitor Bi process chains in SolMan Process Monitoring? I tried to add the chain CCMS node, but for some reason it does not accept the chain (I guess because it is a dynamic created CCMS context).
Regards,
Frank

Hi,
I will monitor one process with the name
pmd, but 4 processes match on these chracters. How
can i tell SMC that the Process Monitoring shows only
the process who exactly Match the entered value ?Have you tried the extra optional user and/or argument filtering?
If all 4 of your processes run as the same user, with the same arguments (or none at all) then you could also symlink a different file name to the binary you want so it appears in your ps output as something unique. That only works if you have control over what launches that process to begin with (so you can change it to call that new name as well).
If you still can't make that process unique you could also write a small script to monitor it and dump back the interesting bits to stdout to be read by ScriptRunner (http://www.halcyoninc.com/products/ScriptRunner/index.php)
Regards,
[email protected]
http://www.HalcyonInc.com

How can i understand the Process Chain management in real time!!!

Hi,
now i am learning BW concepts. now i would like to know the real time scenarios regarding Process chains. can any body help me in this matter?.
thanks,
stikanth.ch

Hi,
A process chain is a defined sequence of interdependent processes required to perform acomplex task in an SAPBW environment. Data maintenance tasks in SAPBW are notrestricted to uploading data. Aggregate rollups, index maintenance, master data and ODS activation, and a variety of other jobs are required to update data, guarantee best-possible performance, and maintain data integrity. Typical SAPBW implementa-tions have complex interdependent networks of jobs in place that run every night, week,or month.Previous releases of SAPBW did not provide an integrated solution for scheduling and monitoring those kinds of job networks. This has changed with the introduction of process chains in release 3.0. Process chains allow you to define complex job networks consisting of standard SAPBW jobs, as well as custom jobs; they support visualizing the job network and centrally controlling and monitoring the processes.
(from "Mastering the SAP BIW")
New Features in BI 2004s Process Chains
/people/mallikarjuna.reddy7/blog/2007/02/08/new-features-in-bi-2004s-process-chains
Designing
/people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
Process chain creation in 2004s - step by step
/people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
http://help.sap.com/saphelp_erp2005/helpdata/en/87/13843b74f7be0fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Try Searching in SDN for this Topic and you will find much detailed info as this is discussed very frequently.
Hope this helps.
Thanks,
JituK

Re : The Overall status of the process chain

Once the process chain is executed to know the over all status of the chain process whether it is completed with errors or not where exactly in the data base the status of the process chain is store. Can any one send the database tables used in process chain

Hi
RSPC_BUFFER Shared Buffer for Processes (Esp. Customer
RSPC_MONITOR Monitor individual process chains
RSPCABAPASYNC Logging for ABAP Processes(Synchronously a
RSPCCATEGORY Process Type Categories
RSPCCATEGORYT Texts for Category
RSPCCHAIN Process chain
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Cha
RSPCENQUEUE Dummy Table for Runtime Locks of a Process
RSPCEXOR Excluding Or: Log Table
RSPCINFO Special Values for Communication between P
RSPCINFOT Special Values for Communication between P
RSPCINSTANCE Generic Instance Storage
RSPCINSTANCET Texts for Generic Instance-Storage
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGCROSS Cross-Table Log ID Old / Log ID New
RSPCLOGS Application Logs for the Process Chains (G
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPCTRIGGER Variants for the Trigger Processes
RSPCTRIGGERT Texts for the Trigger Variants
RSPCTYPESDEP Dependencies for Processes
RSPCTYPESPROC Attributes of BW processes (RSSM)
RSPCVARIANT Generic Variant-Storage
RSPCVARIANTATTR Attributes of a Process Variant
RSPCVARIANTT Texts for Generic Variant Storage
RSPCLOGCHAIN
Hope this may be helpful to you
Many thanks
Kiran

Error in delta run in the process chain

Hello Experts,
I have a delta infopackge that runs everyday , since many days the process chain is giving error at the IP.
The IP is red everyday and the following objects does not start, however when I check in the monitor the ip is completed successfully without any errors.
I checked the logs which is in greeen in the batch job , please find the details below.
Job started
Step 001 started (program RSPROCESS, variant &0000000111903, user ID ALEREMOTE)
Last delta upload not yet completed. Cancel
Data saved successfully
Start InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7
Last delta upload not yet completed. Cancel
Last delta upload not yet completed. Cancel
InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7 created request
Request REQU_4L001XOSR2IQQ14M90QLO1CTA could not be generated with InfoPackage REQU_4L001XOSR2IQQ14M90QLO1CTA without errors
Last delta upload not yet completed. Cancel
Error After Starting InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7 in Process Chain ZIM_INT_ORDER
Entire chain now has status 'A'
Job finished
Could you please suggest.

Hello
Thanks for your reply
the problem was with the way it was schudled, the chian was ticket at periodic run , as a result it as running automatically, and causing problem.
I have removed the periodic n saved it again ...the error stopped appearing !
The issue is resolved now.
Thanks for your help.

How can u know the process chain total time, individual time?

Hi guru's
How can u know the process chain total time, individual time?
and what options will available in sm37?
Thanks
prabha reddy

Hi Prabha
Iam not very sure about total time and individual times.
But you can go to tcode rspcm for monitoring the daily process chains. it gives you details like 1. status 2.start date & time 3. Log ID of each process chain.
or you can go to log view of particular individual chain to know how long it has run.
SM37: tcode for simple job selection.
here you check the status of job.
you can select for certain conditions like
1. scheduled
2. released
3. ready
4.active
5. cancelled
Assign points if it was helpful
Revert back if you need further info/
regards
AP

Issue realted to the process chain.

dear sir,
i hope all are doing great, this is the message regarding the issue with process chain in sap-bw(from application server)
i'm trying to load data from flat file to ods and infocube parallely, i've created the infocube and ods object and i've also created the respective infopackages and copied the name of infopackages.
i've created the process chain and in monitoring i.e. rspcm when i'm adding the process chain the status in not green its a yellow triangle.
apart from that i'm getting an error message saying that- objects have been locked by the sapuser.
please do help me to get rid of this issue.
please do send me the related documents regarding the process chains, that would help me to understand the concept.
thank you.
regards,
ratin.

You will need to post this to a 'better' forum this is crystal reports.

Regarding "Delete Index" process in the process chain.

Hi Gurus
In the process chain, I have Delete Index -> Load Info pacakge -> Create Index process in the above order.
I am loading few records, so no need to delete indexes everytime. Can i remove the "Delete Index" process from the Chain without deleting the Create Index process. Or do I have to delete both.
Could you please clarify my doubt if possible in detail.
Thanks,
Regards,
aarthi

With the numbers you provided, you probably don't need to have the steps. With Oracle (not sure about all the other DB flavors) there are some other considerations:
Not having the indexes when loading the data can improve the load time since the bitmap indexes are not very efficient with respect to inserts/updates. The more dimensions you have, the more indexes there will be and the more noticable the impact of having the indexes present when loading.
The drop index process only drops the F fact table indexes. If you compress your cubes regularly so that you don't have many uncompressed requests, the index rebuild time will remain small, but if you have many uncompressed requests in your cube, the index rebuild time can begin to exceed whatever time you might save on the load with indexes deleted.
With bitmap indexes present, you can also occasionally receive a ORA-0600 deadlock error during the load process, and that can be prevented by dropping the indexes before loading or chose the load option packet by packet so that two packets are not trying to update the same index block at the same time.
Another concern in shops where reporting on the cube might occur during the load process - if you drop indexes prior to a load, any one trying to run a query on teh cube could have poor query performance since all the indexes will be missing onthe F fact table, this agina becomes more apparent the more data you have in the uncompressed fact table.
So it really comes down to your environment, but certainly drop the indexes any time you have large loads.

Event is not getting triggered in the process chain

Hi,
We had a process chain which was triggered by an Event, and it was running fine until few days ago. So I removed the chain from schedule and re-scheduled it again with these details:
File load: every 2 hrs
Process chain setting
Immediate tab: start immediately
After event: "event name" and "parameter name" and periodic job: ticked
I activated the chain and scheduled it. But the event is not triggered and the chain does not start. I even tried to trigger the process chain manually in sm64 but the process chain did not start.
Can someone please tell me steps to automate the event triggering and also any setting that should be taken care off in the info package and the process chain.
Thanks In advance.
Ram

Hello Ram, to start your Process Chain by an event, then you need to maintain the Start process of the process chain.
Select "Direct Scheduling".
In the Change Selections, press After Event. Put your event name and parameter (if any). Also click on Periodic job.
Press Save. Then Activate and Schedule your process chain. All your processes should turn green.
To verify, right-click on the Start process and select Displaying Scheduled Job(s).... You should see a job called BI_PROCESS_TRIGGER in a Released status. You can click on the job and look at the start conditions.
When you go to trigger the event, use the same event name and parameter (if any) as in the start condition. Your process chain will then execute. To insure, use RSPC to view your process chain and press the Logs icon (last one at the top).
Does this help?

To find the time required by the process chain to complete

Hi Experts,
I am calulating the average time required by the process chain to compete.
Is there any way to find the time required by the process chain to complete..
Thanks in advance.
Regards,
Ashwin

Hi,
There is a Tool provided by SAP to do the Process Chain Analysis.
It is basically a ABAP Program /SSA/BWT which provides the following BW Tools:
a)Process Chain Analysis : this tool is used to perform the Runtime analysis of the Process Chains. The analysis can be performed not only at Process Chain level but also at the Process Type level.
b)Detailed Request Analysis
c)Aggregate Toolset
d)Infoprovider BPPO Analysis
So you can go through the program and analyse the runtime of your Process Chains.
Regards,
Abhishek
Edited by: Abhishek Dutta on Aug 13, 2008 7:13 AM

The 0co_om_opa_6 ip in the process chains takes long time to run

Hi experts,
The 0co_om_opa_6 ip in the process chains takes long time to run around 5 hours in production
I have checked the note 382329,
-> where the indexes 1 and 4 are active
-> index 4 was not "Index does not exist in database system ORACLE"- i have assgined to " Indexes on all database systems and ran the delta load in development system, but guess there are not much data in dev it took 2-1/2 hrs to run as it was taking earlier. so didnt find much differnce in performance.
As per the note Note 549552 - CO line item extractors: performance, i have checked in the table BWOM_SETTINGS these are the settings that are there in the ECC system.
-> OLTPSOURCE - is blank
   PARAM_NAME - OBJSELSIZE
   PARAM_VALUE- is blank
-> OLTPSOURCE - is blank
   PARAM_NAME - NOTSSELECT
   PARAM_VALUE- is blank
-> OLTPSOURCE- 0CO_OM_OPA_6
   PARAM_NAME - NOBLOCKING
   PARAM_VALUE- is blank.
Could you please check if any other settings needs to be done .
Also for the IP there is selction criteris for FISCALYEAR/PERIOD from 2004-2099, also an inti is done for the same period as a result it becoming difficult for me to load for a single year.
Please suggest.

The problem was the index 4 was not active in the database level..it was recommended by the SAP team to activate it in se14..however while doing so we face few issues se14 is a very sensitive transaction should be handled carefully ... it should be activate not created.
The OBJSELSIZE in the table BWOM_SETTINGS has to be Marked 'X' to improve the quality as well as the indexe 4 should be activate at the abap level i.e in the table COEP -> INDEXES-> INDEX 4 -> Select the u201Cindex on all database systemu201D in place of u201CNo database indexu201D, once it is activated in the table abap level you can activate the same indexes in the database level.
Be very carefull while you execute it in se14 best is to use db02 to do the same , basis tend to make less mistake there.
Thanks Hope this helps ..

Error while running the process chain

Hi, I am getting following error while running the process chain.
"Lock NOT set for: Deleting the data completely from a data target"
Please suggest.
amit

hi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM

Monitoring the process chain

Similar Messages

Maybe you are looking for