Monitoring tool For Cisco Switches

Hi All,
I have installed 2 Core Switches and 9 Access Switches (4960-X,3560-X and 2960-X) in our organisation. Now we are looking for a Monitoring tool.
To monitor the Traffic status, Link status, Quarterly Health Check, etc. for all the switches on a single page.
Can anyone please suggest which Cisco Monitoring Tool will suite our requirement.
Responsses will be highly appreciated.......
Regards,
Maazeem.

Have you had a look at Cisco Prime Infrastructure?
http://www.cisco.com/en/US/products/ps12239/index.html
Are you looking only to monitor Cisco devices or other devices as well? There are other tools available also so it depends on your environment, budget etc.
Daniel Dib
CCIE #37149

Similar Messages

  • Security monitoring tool for Cisco ASA

    Please suggest a checp and best security monitoring tool for Cisco ASA devices.

    You can use ossec, open source tool installed on linux:
    http://www.ossec.net/

  • Rrack mounting brackets for Cisco switch SF300-48P ?

    Does anyone know how to get rack mounting brackets for Cisco switch SF300-48P ?

    You might be able to get them through Cisco support.  Check this thread: https://supportforums.cisco.com/discussion/11201291/sf-300-series-rack-mount-brackets

  • Has anyone develped an EM plug-in for Cisco switches or routers

    Folks,
    Has anyone develped an EM plug-in for Cisco switches or routers? Please reply to this thread if you have developed one and would like to share your experience in developing this plug-in?
    Thanks,

    It's probably not the conversion from CMYK to RGB that's causing the problem, but color profile (ICC) embedding in Photoshop. Fireworks doesn't read color profiles. You might be able to create an action to remove the color profile in Photoshop and then batch process the images with it.

  • What's "SAVE" configuration command for Cisco switch/ router?

    What's "SAVE" configuration command for Cisco switch / router? I know Switch#copy running-config startup-config works well,
    but so long, any other command that easy to remenber?

    What's "SAVE" configuration command for Cisco switch / router? I know Switch#copy running-config startup-config works well, but so long,
    any other command that easy to remenber?
    yes, here: Switch#write,and want to know more about the Cisco switch, please visit:http://www.3anetwork.com/cisco-switches-price_c1

  • Monitoring tools for db

    Hi
    Would like to get suggestions from everyone for the best monitoring tool for oracle db

    Oracle Enterprise Manager
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com
    [Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

  • Wi-Fi Network Monitoring Tool for Palm OS 5.x

    Hi there..
    I'm trying to develop a 802.11b/g monitor tool for a Palm device (Tungsten C) using J2ME and it turns out to be pretty difficult or maybe even impossible.. meaning, I'm stuck. Since the J2ME VM is optimized for CLDC/MIDP enabled devices, it can't execute parts of the bytecode I used from jpcap. Same while trying to use libpcap with Java (using wrapper classes), it needs some of the J2SE classes which are not or partly supported by J2ME. So I was wondering whether you guys might have some suggestions to solve my problem (using Java)?
    Thanx & Greets from Switzerland, Mike.

    Any particular bytecode? Like maybe to do with doubles/floats? Or is java classes required by libpcap that are missing? I'm guessing you need deeper access to the 802.11 libraries to do monitoring. All you'll have in MIDP is the 'http' connector protocol.

  • Is there any monitoring tool for web server and application server ?

    experts,
    I just want to know that is there any monitoring utility which being used to monitor the web server activities like threads web console session tracking and so on..
    I am using Jboss as my application server.If you suggest any monitoring tool for Jboss It would be helpful for me,

    You may use jConsole

  • DataGuard monitoring tool for NOC

    Hi,
    I'm looking for a dataguard monitoring tool for use in our NOC, I mean something operator/user friendly...

    If you have data guard broker license then your enterprise manager have all this informations to give !
    If you don't have the license then enterprise manager will not have that.
    edit:
    on enterprise manager: database -> choose oyur databse -> availability -> data guard (menu) -> Setup and manage -> ask you to use data guard broker (or not if you database is registered into data guard broker)

  • Monitoring tool for SunFire V210

    Hello,
    We are running a couple of SunFire V210. These servers are doing their job and we never have to touch them, this is the main reason why we have no expertise on these servers.
    One of the servers indicators is actually yellow, so I reckon I must have some Hardware issue with it. Is there any monitoring tool available on Solaris to perform a diagnostic (equivalent od Dell OpenManage on Dell server)?
    Thanks a lot for your time.
    Fred

    There is no "best" monitoring tool for AS. It all depends on what your shop is using currently for monitoring of other servers / services. You could monitor your AS using AS Control, but it doesn't send you any alerts etc. OEM might be a good choice, but not if you have to install (and but) it for one server etc. etc.

  • Monitoring tool for 10gAS

    Hi ,
    As my setup is running oracle 10g application server on Red hat Linux , iam looking for a monitoring tool to monitor my applications server, please suggest me which tool is best for monitoring and administrating
    regards
    Syed

    There is no "best" monitoring tool for AS. It all depends on what your shop is using currently for monitoring of other servers / services. You could monitor your AS using AS Control, but it doesn't send you any alerts etc. OEM might be a good choice, but not if you have to install (and but) it for one server etc. etc.

  • Remote Command Tool for Cisco Routers/Switches

    Is anyone aware of any tools or scripts out there which allow preconfigured commands to be remotely run again Cisco Router/Switches and display the output result?
    I'm looking for a tool which I can give our Service Desk personnel that will allow them to select from a list of commands enter a target IP Address of a router/switch and then the tool will display the vlan table or the running config of a particular switch-port so they can see if its configured on the correct data vlan or its missing its voice vlan etc.
    For example a Service Desk Operator needs to check what vlan a switch-port is on. So they open the tool, enter the switches IP address and the port number and select an option like "display a switch-ports vlan" and the tool will login into the switch in the background run a show command on the switch and then output the result.
    Thanks.

    Check out rConfig. You will be able to run multiple instances of it i.e. one instance for your standard configuration backups and another for more specific configuration downloads info like show vlan bri commands etc for service desk staff to view.
    You could also use the IOS menu function and create menus or role based access on each of your devices for your users.
    Regards
    Stephen
    ==========================
    http://www.rConfig.com 
    A free, open source network device configuration management tool, customizable to your needs!
    - Always vote on an answer if you found it helpful

  • Reporting (Monitoring) Tool for CUCM 8.6

    Hi ,
    I am looking for a reporting or statistic tool for CUCM 8.6. , better we search a Monitoring tool .
    Our main concrn is that we would like monitoring the Lines , the Phones , Calls (In und Out) , Count of Calls etc. not only print but a dashboard also .
    Could you recommend me a programm by your experience ?
    Thanks for your support
    Homayoun

    Here's a quick summary of what to do to view the number of registered phones per subscriber. There's lots more detail on all the available parameters in the docs from that link I gave above.
    Open RTMT and select the Default profile. From the left hand window, select the "Performance" option.
    This will open the Performance screen. Pick one subscriber from the list of nodes, expand it out, and then expand out the "Cisco CallManager" branch. Select and drag the Registered HardwarePhones option to one of the six blank squares.(You can adjust the divider to make reading the labels easier - but selecting the divider isn't always easy) You can repeat for all your other subscribers.
    You can add extra tabs by selecting Edit (From the top-level menu bar) -> New Category.
    GTG

  • Monitoring Tool for Monitoring Business Process

    Hi All,
    Is there any monitoring tool which is able to monitor various technologies .
    we are integrating biztalk with SAP and we are looking for a tool which we can use to monitor both, is there any?
    Praj Dixit

    Hi All,
    Is there any monitoring tool which is able to monitor various technologies .
    we are integrating biztalk with SAP and we are looking for a tool which we can use to monitor both, is there any?
    Praj Dixit
    If if want just to monitor various technologies, lets say BizTalk, then there are lot of tools available for this. BizTalk 360 and SCOM are two main tools.
    similarly if you want to monitor SAP- like availbility of SAP services/URLS/Databases etc, then HP OpenView can be one option.
    However, if you just want to make sure your business process ( integrated BizTalk/SAP..etc) are up and running then you could write some Automated Smoke test scripts, which will perform some basic testing and make sure all components are up and running. 
    Hope this helps. 
    Greetings,HTH
    Naushad Alam
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or
    Mark As Answer
    alamnaushad.wordpress.com

  • Configure Domain Controller ( PDC emulator) as NTP source for Cisco switch 6509

    Hi All,
      My Org consists of 2 DC one Physical and One Virtual. All Roles are on Physical machine. I ran a W32tm /Query /Configuration command  on PDC emulator and the results are confusing.My PDC is using time source VMICTimeProvider a syou can see below.
    VMICTimeProvider (Local)
    DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
    Enabled: 1 (Local)
    InputProvider: 1 (Local)
    My first Question is that Is it Ok for PDC emulator to use this time source or should I change to some Other source like pool.ntp.org or time.windows.com,0x1.
    My Second Question is that I  have a core switch cisco 6509 and I want this switch to use my NTP server (PDC emulator ) as NTP source,but at present I cannot as I am getting this error on switch.(no select intersectionTP )
    Can Any one help ... Its is urgent
    Thanks in Advance
    EagleAsh

    You should not make your DCs sync their time with your Hypervisor. This usually ends with time synchronization problem so I would recommend to disable that on your DCs and domain joined VMs and use an external NTP server to sync time on your PDC while using
    your AD forest topology for time sync on other DCs and domain-joined computers.
    I have already started a Wiki article that describes how to configure time sync in an AD domain and you might consider using the GPO configuration option that is stated: http://social.technet.microsoft.com/wiki/contents/articles/18573.time-synchronization-in-active-directory-forests.aspx
    For the CISCO switch, I would recommend asking them in CISCO forums.
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

Maybe you are looking for