Monitoring Tool for Monitoring Business Process
Hi All,
Is there any monitoring tool which is able to monitor various technologies .
we are integrating biztalk with SAP and we are looking for a tool which we can use to monitor both, is there any?
Praj Dixit
Hi All,
Is there any monitoring tool which is able to monitor various technologies .
we are integrating biztalk with SAP and we are looking for a tool which we can use to monitor both, is there any?
Praj Dixit
If if want just to monitor various technologies, lets say BizTalk, then there are lot of tools available for this. BizTalk 360 and SCOM are two main tools.
similarly if you want to monitor SAP- like availbility of SAP services/URLS/Databases etc, then HP OpenView can be one option.
However, if you just want to make sure your business process ( integrated BizTalk/SAP..etc) are up and running then you could write some Automated Smoke test scripts, which will perform some basic testing and make sure all components are up and running.
Hope this helps.
Greetings,HTH
Naushad Alam
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or
Mark As Answer
alamnaushad.wordpress.com
Similar Messages
-
Performance monitoring tool for Essbase
Currently we are using Zabbix to monitor the resource usage of Essbase database (CPU, memory, disk IO, etc).
We would like to know is there are any other web based monitoring tools that can monitor down to process level. The existing Windows performance monitor is relatively complex and also lack of web based interface for administrator to monitor the processes easily.
We are also looking at Quest Spotlight for Windows but not yet fully explored its capability. We would like to know if there are other choices used by other Essbase administrators.
Thanks in advance.Jbooth wrote:
Please review the following thread where I wrote a bit about monitoring tools - Re: Monitoring System 9.3.1 Availability
Regards,
JohnThanks John! I don't realize that Hyperic is a open source freeware for monitoring. I will try this way. -
Hi,
Our's is a multithreaded application. Recently in production our application is getting hang and stop running after running for sometime. Later we changed the VM arguments we pass at the time of startup and it is running fine. But the same application is running fine in SIT and UAT with the old VM confiuration. We are using JDK1.4 and running on Sun Solaris5.8. The old and new VM arguments are
OLD MEM_ARGS:
-Xms128m -Xmx256m -XX:PermSize=128m -XX:MaxPermSize=128m -Xss512k
NEW MEM_ARGS:
-XX:+PrintGCDetails -XX:+PrintHeapAtGC -Xms128m -Xmx512m -XX:PermSize=32m -XX:NewSize=32m -XX:MaxNewSize=128m -XX:MaxPermSize=128m -Xss512k
Can anyone suggest any VM monitoring tool to monitor the VM statitics and thread stack of my application/process. Can I use monitoring tools comes with JDK1.5 to monitor JVM of 1.4. If ye, how to use it. Please help me as it is very serious problem in Production.Is it at all possible to use JDK 1.5? The monitoring tools/APIs both inside and outside the VM are far superior to those in 1.4. We upgraded to 1.5 immediately after it came out solely because of this.
You've made several changes all at once between your old and new vm arguments. Maybe you could try small sets of changes at a time to help narrow down which set is helping you (for example, try only adding the memory size change by itself). If an Error is thrown in your threads, what catches or logs it? Maybe it'll show up wherever stderr is logged. -
Hi
Would like to get suggestions from everyone for the best monitoring tool for oracle dbOracle Enterprise Manager
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
Wi-Fi Network Monitoring Tool for Palm OS 5.x
Hi there..
I'm trying to develop a 802.11b/g monitor tool for a Palm device (Tungsten C) using J2ME and it turns out to be pretty difficult or maybe even impossible.. meaning, I'm stuck. Since the J2ME VM is optimized for CLDC/MIDP enabled devices, it can't execute parts of the bytecode I used from jpcap. Same while trying to use libpcap with Java (using wrapper classes), it needs some of the J2SE classes which are not or partly supported by J2ME. So I was wondering whether you guys might have some suggestions to solve my problem (using Java)?
Thanx & Greets from Switzerland, Mike.Any particular bytecode? Like maybe to do with doubles/floats? Or is java classes required by libpcap that are missing? I'm guessing you need deeper access to the 802.11 libraries to do monitoring. All you'll have in MIDP is the 'http' connector protocol.
-
Is there any monitoring tool for web server and application server ?
experts,
I just want to know that is there any monitoring utility which being used to monitor the web server activities like threads web console session tracking and so on..
I am using Jboss as my application server.If you suggest any monitoring tool for Jboss It would be helpful for me,You may use jConsole
-
DataGuard monitoring tool for NOC
Hi,
I'm looking for a dataguard monitoring tool for use in our NOC, I mean something operator/user friendly...If you have data guard broker license then your enterprise manager have all this informations to give !
If you don't have the license then enterprise manager will not have that.
edit:
on enterprise manager: database -> choose oyur databse -> availability -> data guard (menu) -> Setup and manage -> ask you to use data guard broker (or not if you database is registered into data guard broker) -
Security monitoring tool for Cisco ASA
Please suggest a checp and best security monitoring tool for Cisco ASA devices.
You can use ossec, open source tool installed on linux:
http://www.ossec.net/ -
Monitoring tool for SunFire V210
Hello,
We are running a couple of SunFire V210. These servers are doing their job and we never have to touch them, this is the main reason why we have no expertise on these servers.
One of the servers indicators is actually yellow, so I reckon I must have some Hardware issue with it. Is there any monitoring tool available on Solaris to perform a diagnostic (equivalent od Dell OpenManage on Dell server)?
Thanks a lot for your time.
FredThere is no "best" monitoring tool for AS. It all depends on what your shop is using currently for monitoring of other servers / services. You could monitor your AS using AS Control, but it doesn't send you any alerts etc. OEM might be a good choice, but not if you have to install (and but) it for one server etc. etc.
-
Hi ,
As my setup is running oracle 10g application server on Red hat Linux , iam looking for a monitoring tool to monitor my applications server, please suggest me which tool is best for monitoring and administrating
regards
SyedThere is no "best" monitoring tool for AS. It all depends on what your shop is using currently for monitoring of other servers / services. You could monitor your AS using AS Control, but it doesn't send you any alerts etc. OEM might be a good choice, but not if you have to install (and but) it for one server etc. etc.
-
Reporting tools for the Business user - Crystal reports or BEx tools ?
Hi,
We have recently implemented BI/BO infrastructure. Scope of the inital implementation was an executive dashboard based off COPA data. We have used Xelcisus for dashboard and BEx tools for query design etc.
We would like to set up some of our key business users (analysts in respective functions) to be able to write their own queries off this COPA cube. The discussion point is whether to roll out Crystal reports for business users or have them trained on BEx tools i.e BEx query designer/analyzer.
Any inputs to my question "Crystal Reports or BEx tools for the Business users - pros and cons", is appreciated.
Thanks,
GirishOur user currently do not have anything. It's fresh implementation. We would like to get the business users involved. The question is - what's the best start for a business user - Crystal Reports or Bex ?
-
Reservation of Stock for different business processes
Hi
We have a scenario like two types of sales processes are there
1. Direct Sales
2. E-sales
From Plant-A both sales will happen, but while creating sales order for direct sales 70% of the plant capacity and E-sales 30% of the plant capacity.
plant capacity we are mapping with planned orders
how can we acheve this.
reagrds
rajendraI doubt that Reservation of Stock is possible for different business processes. Based on Sales Orders, the stock will be consumed.
Regards,
Rajesh Banka -
Monitoring proxy abap in business process monitoring
Hi
Expert. Iu2019m working with Business Process Monitoring in my Solution Manager 7.0 sp20.
I would to monitor the communication between SAP ECC and SAP PI.
SAP ECC and SAP PI communicate by proxy.
I would know if can I monitor the proxy abap using SAP PI Message Error Monitoring based on Message-Based-Alerting (RWB).
I have just defined the alert category in abap stack and in RWB. In RWB I have inserted all information in u201CConditionsu201D fields and in the u201CWhere did the error occur?u201D fields I have chose:
Integration engine : XI Proxy
Error Code: *
Is this the correct procedure to monitor a proxy abap?
Thanks a lot
Giou2019Hello Giovanni,
The described procedure looks correct in general. If you have set any restrictions in "Conditions" fields than you will only monitor on these specific message. If not all message will be considered which turn into a error status on the ABAP Proxy.
For information regarding the PI/XI Message Based Alerting please refer to service.sap.com/bpm -> Media Library -> Technical Information "Setup Guide - Interface Monitoring".
Best regards,
Maciej -
Managed Server Monitoring tools for WLS 8.1 on linux
Our organization uses a set of locally written shell scripts to monitor the status of the managed servers in a WLS 8.1 domain installed on RedHat Linux 4, update4.
The main monitoring script uses the output of the "ps" and "netstat" commands to determine the process-id, server name, and tcp ports used by each managed server.
It is able to determine the name of the managed server by parsing the value of the "-Dweblogic.Name" parameter from the command line of the java command that launches the jvm that represents the managed server.
When a managed server is started, the command line resembles the following:
java \
-DLotsofVariables \
-classpath LotsofCpElements \
-Djava.security.policy==PolicyFile \
-Dweblogic.Name=NameOfMgdServer
The maximum number of characters displayed by the "ps" command with the wide (-w) option is 4096.
A recent addition to the class path has increased the length of the command line, resulting in the "NameOfMgdServer" being truncated.
It now appears similar to the following:
java \
-DLotsofVariables \
-classpath LotsofCpElements \
-Djava.security.policy==PolicyFile \
-Dweblogic.Name=NameO
This breaks our monitoring script because it is looking for a managed server named "NameOfMgdServer", not "NameO".
Each managed server is monitored by the WLS administration server and the local node manager.
Is there a way to restructure or rewrite the command line used to launch the managed server java jvm such that the "-Dweblogic.Name=NameOfMgdServer" appears before the specification of the classpath?
I can find no mention of the "-Dweblogic.Name" parameter on the "Remote Start" tab corresponding to each managed server, so it appears that WLS is building the java command line internally based on the contents of the config.xml file, before launching the managed server process.
I've considered adding an additional parameter to the java command line preceding the specification of the classpath, simply to identify the identity of the managed server, but I don't like this type of hack.
Perhaps someone else has developed a similar monitoring tool, and could provide some advice?
Any feedback is appreciatedOur organization uses a set of locally written shell scripts to monitor the status of the managed servers in a WLS 8.1 domain installed on RedHat Linux 4, update4.
The main monitoring script uses the output of the "ps" and "netstat" commands to determine the process-id, server name, and tcp ports used by each managed server.
It is able to determine the name of the managed server by parsing the value of the "-Dweblogic.Name" parameter from the command line of the java command that launches the jvm that represents the managed server.
When a managed server is started, the command line resembles the following:
java \
-DLotsofVariables \
-classpath LotsofCpElements \
-Djava.security.policy==PolicyFile \
-Dweblogic.Name=NameOfMgdServer
The maximum number of characters displayed by the "ps" command with the wide (-w) option is 4096.
A recent addition to the class path has increased the length of the command line, resulting in the "NameOfMgdServer" being truncated.
It now appears similar to the following:
java \
-DLotsofVariables \
-classpath LotsofCpElements \
-Djava.security.policy==PolicyFile \
-Dweblogic.Name=NameO
This breaks our monitoring script because it is looking for a managed server named "NameOfMgdServer", not "NameO".
Each managed server is monitored by the WLS administration server and the local node manager.
Is there a way to restructure or rewrite the command line used to launch the managed server java jvm such that the "-Dweblogic.Name=NameOfMgdServer" appears before the specification of the classpath?
I can find no mention of the "-Dweblogic.Name" parameter on the "Remote Start" tab corresponding to each managed server, so it appears that WLS is building the java command line internally based on the contents of the config.xml file, before launching the managed server process.
I've considered adding an additional parameter to the java command line preceding the specification of the classpath, simply to identify the identity of the managed server, but I don't like this type of hack.
Perhaps someone else has developed a similar monitoring tool, and could provide some advice?
Any feedback is appreciated -
External tools for monitoring job scheduling
Hello All,
Please give me the infomation on third party tool used for monitoring the process chains, handling issues and job scheduling.
Also why do we need third party tools and what are the available third party tools..
Thanks
Regards
M.AHi,
Giving you a scenerio,
Data load from Oracle to BI. Flow is
Oracle 7.0 --> Oracle 10G Daily refresh
Oracle 10G --> BI 7.0 Daily load ones Oracle 10G refresh complete
how BI 7.0 will understand if 10G refresh is complete ?
Need a triggering/scheduling tool which triggers events that this step is complete.
These tools usually reads a small file usually kepts on servers using FTP ones one step is complete. Such tools read if the file is available ( based on conditions provided, like check between 2am to 3am if file has arrived etc.) and ones available they trigger an even and next process starts
E.g. MAESTRO is used in such case.
Regards,
Akshay
Maybe you are looking for
-
Supporting Multiple domains in IM&P with and Expressway deployment?
Hello everyone. This is long winded but the context is needed to explain what I'm looking for. Any help is appreciated. My customer has piloted IM&P for 1 year now and is looking to take it to the next level. They purchased Expressway Core & Edge and
-
I have a previous itunes with music on it and now have a new 8GB nano and want to sync the music onto it but all it does is ask me to register my ipod (which I did) and then asks me to read the whole software license, check the box, save it, and then
-
Hey, everytime i want to use a SVG Filter Illustrator crashes - and i cant open files with an SVG Effect in it. ty
-
BEx: diagram missing in workbook
Dear experts, I have included a diagram in a workbook (via menu -> layout -> diagram) and saved the workbook. When I start the workbook again (via role in SAP) the diagram is disappeared. We use BI 7.0, but the query still was created under BW 3.5. H
-
Hi, i am working on a web application using the weblogic controls (e.g. database controls, custom controls, ...) I want to enable the bea server to execute a job every night. This job check the database and send emails to an administrator. I want to