Monitoring Tool : sje-systems

Hi,
Whether anybody using monitoring tool of sje-systems for weblogic 8.1.
http://www.free-administrator.com/Oracle-Weblogic-8.1-Monitor?n2123375857=119
http://www.sje-systems.com/
Please provide your inputs for any similar free tools for weblogic monitoring.

Hi
SAPMSG.INI file only for SAP systems, for non sap systems monitoring data exclusively pushed by the local agents
for detail please refer under [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
Thanks,
Jansi

Similar Messages

System Performance(Health) Monitoring Tool

Hi Experts,
We need to monitor our BW system performance at the database level, OS level, Data Retrieval level, Data loading level. Is there any tool or BW queries to track the performance?
Regards,
D. Dinesh

Hi Dinesh,
I think the best tool is to subscribe an Early Watch report from BW, you can find all necessary information under www.service.sap.com/bi. SAP will send you a very detailed report with all your problem in the system at every level (DB - AWB - BEx - GUI - ...).
If you do not want this report (you must pay to have it) you can try with Statistics, check in Business Content for all related Structures, also if I am not sure this will satisfy all your requirements.
Ciao.
Riccardo.

Oracle EPM 11.1.2.1 Monitoring tools

Gurus,
could you please let me know what are the available system monitoring or performance monitoring tools for oracle EPM 11.1.2.1 or in case licenses are involved what are the best key areas for manual procedures to monitor the system?
Many thanks !

Hello,
Monitoring is a broad term. There are many 3rd party tools available that can provide monitoring, it all depends on what exactly you're looking for.
Oracle has a document on setting up Oracle Enterprise Manager to monitor Hyperion Applications: http://www.oracle.com/technetwork/middleware/bi-foundation/sys9-oem-integration-1-129287.pdf. For performance monitoring, you can also look at this: https://blogs.oracle.com/pa/entry/epm_11_1_2_how3. This will basically connect to the JRockit JVM and look at the performance for the web application.
If you want to do more monitoring (services, servers, processor, CPU), you can look into Hyperic HQ: http://www.hyperic.com/. They have both an open source version and an enterprise version. I've used the open source version myself and it is pretty good and plays well with Windows. You can see many metrics, graphics and information via the web based application. You can also setup email alerts on certain activities (service stop, service start) and also monitor website availability. For being an open source software, I think it offers alot and it is very reliable.
Again, these are just a few suggestions. There are many tools out there that can accomplish what you're looking for.
Regards,
Luis

Messages are Holding in message monitoring tool

Hi All,
I am facing the problem with messages which are in holding state.
My scenario is file to proxy. The file content contains of EDI. my scenario is already gone to production last year.
and its working fine. Used java mappings for validation of EDI file. its running successfully.
where as in Dev system till october first i used to load the files in FTP inbox folder and messages were processed successfully.
But from october first week when i load the files in FTP inbox, file has been picking succesfully and can see the logs in sender comm channel but the i can see that my interface is in holding state in message monitoring tool and its not going to receiver comm channel. I have loaded 5 files and all are in holding state.
even i have cancelled first error message and tried to resend the next message swhich is in holding state, but this is not happening.
i am using EOIO queue.
when i cancel the error message remaining messages should processed automatically but its not getting processed here.
sequencing of the interface triggering is
1. Interface_1
2. Interface_2
3. Interface_3
4. Interface_4
Here i am stucking up with the first interface itself.Here only first interface is in holding state.
can any one advise what could be the problem..
I m on SP 10.
Thanks,
Bhaskar

Hi Abhijit,
Even after unchecking the checkbox maintain order at runtime, its not working.
i think there is no disturbed in message processing sequence.
my first sender interface itself going into hold state.
i have cancelled the hold message, even after that remaining messages are processing automatically.
and also i could not fine any messages in SMQ1 and SMQ2.
I also deresister and registered te queues and activated.
Kindly advise what would be the problem..
in production its working fine and development its not working fine.
Thanks,
Bhaskar

Suggest a good free monitoring tools

Hi Folks,
Please suggest a good free monitoring tools like big brother, hobbit. Only for solaris servers. it should be easy to configure.

For system resource checking,
- prstat
- sar
- iostat
- zpool iostat ( if the filesystem is ZFS )
- mdb ( Memory check)
example) echo ::memstat | mdb -k
I assume all free tools are from the commands above.
Hope it helps.
Cheers,

New monitoring tool for SAP BusinessObjects Enterprise XI 3.1 SP2 & higher

Did you know that there is a new monitoring tool available for SAP BusinessObjects Enterprise XI 3.1?
It produces reports that summarise the SAP BusinessObjects Enterprise system landscape and its configuration, helps out with troubleshooting issues and points out areas of concern.
It also delivers a lot of help with troubleshooting issues via Wily Introscope monitoring dashboards, an 'investigator' and transaction tracing.
You can read more about it in this blog: /people/miles.escow/blog/2010/12/01/remote-support-component
Edited by: Christian Luehe on Dec 2, 2010 5:07 PM

Hi,
we support official IBM Tivoli and Mircosoft SMS.
Check google with "businessobjects enterprise monitoring" and you will find a lot of other vendors. maybe you find yours.
Regards
-Seb.

Custome build PI monitoring tool

Hello Experts,
We are in the process of considering PI 7.1 as the next generation of EAI solution.
We have come across a requirement to build a custom web based application to show PI monitoring data.
The current EAI tool comes with such a user friendly web based application where bussiness users can see historic data about messages related to their bussiness units.We thought of having users to login to Run time work bench and see the message data, however, the RWB is too complex for the non technical users and it also have few components (performance monitoring, componenet monitoring) which end will not be concerned about.
Have anybody come across this kind of requirement?? Have anybody tried building a custome monitoring tool over PI in their PI implemetation??
Suggestion and comments will be greatly appreciated.
- Rajan

Thanks for the reply Prateek.
I apology for the late reply.The link you have mentioned talks about fetching the data out of integration engine tables.
I have following two concerns here about this approch if you would like to add your views on -
1. What if the message fails while it is being picked by the adapter? Will this message state be recorded in the IS tables? My understanding is that this message state will only be stored in the adapter frame work tables which are at java stack.
2. How much volume of data can be transported over the web service? What if I have thousands messages flowing throw the PI on per day basis? And using this web service, I may search for all the message details for the messages passed through the PI system in last one day or one week??
- Rajan

Advanced IDOC Monitoring Tool (AIM)

Dear all,
what is the Transaction of 'Advanced IDOC Monitoring Tool (AIM)' ?
It is mybe the WE02?
regards

Hi
IDOC Monitoring
WE02 IDoc display
WE05 IDoc Lists
WE06 Active IDoc monitoring
WE07 IDoc statistics
System Monitoring
SM12 Locked Entries
SM13 Update Monitoring
SM21 System Log Display
SM58 Transactional RFC Log
SM66 Debug Async Update Tasks
ST22 Dump Analysis
Regards
Gaurav

Server Monitor tool

Why cant i login to the server monitor tool on the server, also tryed from a remote machine.

Use the local path provided in Server Monitor. To add the entry for Server Monitor running directly on the box that is being monitored, [you can use the localhost/127.0.0.1 path|http://support.apple.com/kb/TA24514] or the local system option within the Server Monitor menus.
I'd encourage setting up a VPN solution here on your firewall, and not opening up the IPMI path through any firewall. Low-level console and similar hardware-level access can be a powerful attack vector, whether for a remote user that guesses right or for a currently- or formerly-authorized user that goes rogue. VPNs have various advantages, not the least of which is that you don't have to punch gazillions of protocol-specific holes through a firewall to get work done. And you can more centrally and more easily authorize (or de-authorize) specific remote access, given a decent firewall.
If you do want to expose your IPMI to the wilds, here's the [Apple Well-Known Ports List|http://support.apple.com/kb/TS1629], and you'll find the IMPI LOM stuff and Server Admin listed in there.
And for completeness, here is the general [LOM configuration sequence|http://support.apple.com/kb/HT2773]. Remember to physically pull the plug to power-cycle the LOM itself; the LOM stays powered when the box itself is shut off. Pulling the mains for some seconds forces the LOM to reload its configuration and its network settings when power is restored.
Why localhost? NICs can serve multiple network addresses, and you can't get an IP packet out from one address on the box on the NIC, and back in the same NIC on a different address. Ethernet just doesn't work that way. And the host and the LOM can use the same NIC, though with different addresses.

UCS Blade Utilization / Performance Monitoring Tools?

An unnamed software system vendor from whom we have purchased product was not ready to support their product in a virtualized platform environment. But we are a Cisco UCS shop. So we added a chassis, put four blades in it, and let the vendor install and configure their product across the four blades. I am not satisfied with the performance of their application, and have doubts that it is actually using the resources of all four blades. And I have no idea how to see the utilization of CPU Mhz or memory or even the blade-to-blade communication that one would expect the software system's clustering to implement.
NetApp has a great tool in OnCommand System Manager for monitoring the storage system performance. vSphere does a nice job with vSphere Client for datacenter hosts and the guests defined therein. But these blades are used as individual Linux servers....I'm looking for a way to get a view of how the application is using these compute resources.
Is anyone aware of a useful performance dashboarding tool available for monitoring the performance of blades in a UCS chassis?

A couple of answers:
ESXi hosts are monitored using a connection to vSphere, not directly to each ESXi host. By connecting to vSphere, UCS PM is able to track VMs as they vMotion from host to host. vSphere versions supported are 4.1, 5.0, 5.1.
Microsoft Servers are monitored using the WinRM protocol. Supported versions include 2003, 2008, 2008 R2, 2012, and 2012 R2. Hyper-V is supported on 2008, 2008 R2, 2012, and 2012 R2.
UCS PM is a performance and capacity monitoring product for people running UCS-based integrated infrastructures. That means it covers OS, virtualization, UCS compute, storage, and a focused set of network devices.
DCNM helps people implement, visualize, and manage a UCS Unified Fabric. It works with a really broad range of network devices.
You might well want both products. It depends on what you're trying to do!
In general UCS PM is licensed by the server, where all servers in a domain must be covered. There's one version just for the UCS fabric and one that covers all the integrated infrastructure components.
Perhaps a Cisco employee can respond on pricing.

Databases Performance Monitoring Tools

Hi Friends,
As I am searching for databases (sqlserver 2012) performances monitoring tools, I found lot of performance monitoring tool available in market but most of them even raise lot of hits to database and eating databases resource while collecting sample
data for performance monitoring. please help me to find best tool
asad

Hi asad,
Microsoft SQL Server and the Microsoft Windows operating system provide utilities that allow us to view the current condition of the database and to track performance as conditions change. There are a variety of tools and techniques that
can be used to monitor Microsoft SQL Server Databases.
The following document provides some Performance Monitoring and Tuning Tools:
http://msdn.microsoft.com/en-us/library/ms189081(v=sql.110).aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Motherboard and temp monitoring tool.

looking for motherboard monitoring tool like core center.
system specs.
msi 790gx-g65
amd phenom 2 x3 720 be
nvidia gtx 260 graphics
wd 250gb sata2 hd
4gb kingston hyperx ddr3 memory
cool max 600w psu
windows xp x64
system is stable and running fine , just like to have something like core center that will run in the background to give me a quick temp check.
tia

look here:
https://forum-en.msi.com/index.php?topic=107133.0

Best proactive monitoring tool

HI,
Please advise the best network proactive monitoring tool, that can raise auto-alert tickets with Remedy software.
Thanks

1 Spotlight works in about the same fashion as Grid Control/OEM, so you need a database to store metrics
2 Grid Control can also take care of Oracle patches, notifying you a patch has been released, and optionally install it, and even of O/S patches
3 Spotlight is a product of a third party, so it will always be less tightly integrated with Oracle
4 The Grid Control is interfaced by means of a browser, whereas Spotlight needs a fat client. If you want to have Spotlight on multiple systems, you have to buy it multiple times.
Sybrand Bakker
Senior Oracle DBA

WebLogic Monitoring tools

Are there any monitoring tools (say monitoring weblogic server is up or not , finding no of JMS queues and active connections, finding how much java heap is being used etc) available for WebLogic Server? Are there any documents available from Bea detailing the classes available for accomblishing the same.
Thanks
Venkat

Venkat,
There is a company called Precise (www.precise.com) that offers products for
WebLogic, Oracle, EMC, some ERP systems, and CISCO, as well as software that
ties all the information together. AFAIK, their WebLogic monitoring product
is currently only available as part of a "solution" (i.e. it comes in a
package with a consultant and may be bundled with some of their other
products).
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"Venkat" <[email protected]> wrote in message
news:3a313863$[email protected]..
>
Are there any monitoring tools (say monitoring weblogic server is up ornot , finding no of JMS queues and active connections, finding how much java
heap is being used etc) available for WebLogic Server? Are there any
documents available from Bea detailing the classes available for
accomblishing the same.
>
Thanks
Venkat

Pro-active Monitoring tools of EBS

Hi hussein/helios
We have exisinting EBS 11i
My boss ask me to be "proactive" in managing the system. I know she finds this word in the internet. She is just a sales person and not technical :)
She is so good in research and reading and surfing that all she finds in the internet, she pass it for me to carry out :(
Is there "proactive" monitoring tool in EBS? Have anyone of you do some "proactive" work in your EBS system?
She gave me list of things to do to be monitored "proactively".
Can you please help me validate where she found this document?
Are these activity found in OAM? or OEM?
Administering Linux server:
    * Software installation and patching
    * Custom disk partitioning
    * CERT advisory monitoring
    * System log rotation and maintenance
    * Space management
    * Boot script maintenance
Monitoring Systems :
    * Server and network interface availability
    * CPU, disk, and memory utilization
    * Swap space availability
    * Standard software ports
    * System and application logs
    * Backup execution
    * Custom scripting and monitoring available
Administering E-Business Suite:
    * Software installation including latest consolidated and critical patches
    * Ongoing patching support
    * Cloning production to managed test/dev environments
    * Concurrent manager configuration
    * Compile standard apps schema objects
    * Compile standard application objects
    * Advice on extending applications with custom code
Monitoring E-Business Suite:
    * Database, network, and server availability
    * Concurrent queue monitoring
    * Notification mailer availability
    * Forms and reports server availability
    * Application server availability
    * Custom scripting and monitoring available
===END===Do you have some home made scripts that handles these processes?
Thanks a lot
MsK

Hi MSK;
I belive she is giving you nice path to develop yourself about Oracle.
Can you please help me validate where she found this document?I belive she found this from:
http://www.blackdogdzine.com/blu/managed-services.htm
Better way ask it to her ;)
Are these activity found in OAM? or OEM?For Someof future answer is yes, you can make googling to find to use benefit of OEM
I strongly suggest to check below thread for your issue:
tool for ebs
Re: Tool for managing EBusiness environments *<< Posted by Hussein Sawwan*
As you can see there are many tool avaliable,please follow thread observe tools and you can give her one other idea about choosing tool
Regard
Helios

Monitoring Tool : sje-systems

Similar Messages

Maybe you are looking for