Monitoring using Enterprise Manger (Cloud Control 12c)

Hello,
I have problems using Enterprise Manager to Monitor the GoldenGate Manager.
The Jagent is running, and the host agent is known by Cloud Control, but it doesnt find the jagent.
Somebody an idea?
http://docs.oracle.com/cd/E24628_01/install.121/e27804/toc.htm
Thanks

See this step by step guide on Oracle support:
GoldenGate Monitor Plug-In for Enterprise Manager 12c Visual Installation Guide (Doc ID 1469108.1)
Good luck,
-joe

Similar Messages

Oracle VM and Oracle VM Template for Enterprise Manager Cloud Control 12c M

Hello!
After installation of *"Oracle VM 3.1.1 Media Pack v1 for x86_64 (64 bit)"* to bare hardware
can I install Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack ?
Is it the wrong plan ?
What to do if I need to set VLAN №1 ? (according note of installer I have to choose number between 2 and 4094 )
Thanks and regards,
Pavel
Edited by: Pavel on Jul 30, 2012 5:01 AM

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1

Hello
I download Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1
I was checking the structure and I found this
[oracle@em12c bin]$ cd /u01
[oracle@em12c u01]$ ls
app lost+found OracleHomes oracle-template.sh scripts
[oracle@em12c u01]$ cd OracleHomes/
[oracle@em12c OracleHomes]$ ls
checkpoints db11g Middleware
[oracle@em12c OracleHomes]$ pwd
/u01/OracleHomes
[oracle@em12c OracleHomes]$ cd db11g/
[oracle@em12c db11g]$ ls
admin cfgtoollogs checkpoints diag fast_recovery_area oradata product
[oracle@em12c db11g]$ cd ..
[oracle@em12c OracleHomes]$ cd Middleware/
[oracle@em12c Middleware]$ ls
[oracle@em12c Middleware]$
The Database has all binaries but Middleware is empty
Same body knows about this issue.
Regards

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

Dbcontrol migrate to enterprise manager cloud control 12c

Currently we are using Oracle 11gR2 database in our enterprise and manage them with EM database control.
We're planning to migrate to centralized management with oracle enterprise manager cloud control 12c.
Is it possible to manage DBs both ways, with db control AND using EMCC agent simultaneously?
Is there a easy way to migrate db control managed DBs to be managed by agent?
I've searched EM documentation but didn't find any topic about this job.

Hi P2
Yes You can manage DB from both. But why you are going to use EM instead of Cloud Control 12. You Can do each and every work from it more tan EM. Cloud Control 12c is very good tool.
No. But You can easily setup them using manual agent push or auto discovery method from cloud control 12c. You need to create password less ssh login to both side for oracle user and open the relevant ports from network. It is very easy. After add agent you can add targets from relevant hosts easily.
Thanks
Dilshan
Edited by: user11923797 on Dec 24, 2012 10:39 AM

How to find out Oracle Enterprise Manager Cloud Control 12c Home page

Hi all,
I have a PROD environment with OEM Cloud Control 12c and I do know its home page, but today I was wondering, what if I do not know the environment where could I get this info.
So I tried to find it out on Oracle docs and on the internet, on my environment but I was not able to find this info.
Could you guys help me?
Thanks in advance.

Hi ,
The easiest way is to run emctl status oms -details command from OMS_HOME/bin and check for the value for Console URL
example
$ emctl status oms -details
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root (SYSMAN) Password :
Console Server Host        : myomshost.mydomain.com
HTTP Console Port          : 7789
HTTPS Console Port         : 7801
HTTP Upload Port           : 4890
HTTPS Upload Port          : 4901
EM Instance Home           : /u01/app/oracle/product/Middleware12cR2/gc_inst/em/EMGC_OMS1
OMS Log Directory Location : /u01/app/oracle/product/Middleware12cR2/gc_inst/em/EMGC_OMS1/sysman/log
OMS is not configured with SLB or virtual hostname
Agent Upload is locked.
OMS Console is locked.
Active CA ID: 1
Console URL: https://myomshost.mydomain.com:7801/em
Upload URL: https://myomshost.mydomain.com:4901/empbs/upload
WLS Domain Information
Domain Name      : GCDomain
Admin Server Host: myomshost.mydomain.com
Managed Server Information
Managed Server Instance Name: EMGC_OMS1
Managed Server Instance Host: myomshost.mydomain.com
WebTier is Up
Oracle Management Server is Up
Other way is to check in the <OMS_HOME>/install/setupinfo.txt file and check for Enterprise Manager Cloud Control URL
Regards,
Rahul

Enterprise manager cloud control 12c issue configuring Target Disconvery

I've performed a silent agent install of Oracle Enterprise Cloud Control Agent 12c on the first node of a RAC two node cluster (oracle 11gR2) on Red Hat Linux 5.6 64bit.
oemgrid>./emctl status agent
Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
Agent Version : 12.1.0.1.0
OMS Version : (unknown)
Protocol Version : 12.1.0.1.0
Agent Home : /emcc/agent12c/agent_inst
Agent Binaries : /emcc/agent12c/core/12.1.0.1.0
Agent Process ID : 31354
Parent Process ID : 31302
Agent URL : http://rac1.respecti.com:3872/emd/main/
Repository URL : https://emcc.respecti.com:14511/empbs/upload/
Started at : 2011-10-25 16:36:47
Started by user : oemgrid
Last Reload : (none)
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0
Number of XML files pending upload : 1
Size of XML files pending upload(MB) : 0
Available disk space on upload filesystem : 91.95%
Collection Status : Collections enabled
Last attempted heartbeat to OMS : 2011-10-25 16:36:52
Last successful heartbeat to OMS : (none)
Agent is Running and Ready
However from OMS server (OECC 12c)
From Setup -> Add Target -> Configure Auto Discovery
Configure Auto Discovery -> Database - Listener -> Agent Based -> Configure
Add Host -> Target Type = Host
Target Name = rac1
Host Name = 192.168.1.12 -> Search -> AND NO TARGETS FOUND
Why
Recommendations Appreciated!

If I am understanding correctly, you are looking to discovery a RAC DB on a host on which you deployed an agent. The auto discovery configuration you mention is used to configure the frequency of automatic discovery on a given host after the initial deployment. Normally, you do not need to do anything in this screen.
Immediately after initial installation and successful registration, the agent will search the host automatically for database installations and report its findings to the OMS. These results can be seen in Setup->Add Target->Auto Discovery Results on the Non-Host targets tab. Here you can search by host and you should see a Cluster Database target. To get the target under management, select it and click Promote and follow the wizard.
You can also initiate a discovery of databases on a host by going to Setup->Add Target->Add Targets Manually. Select Add Non-Host targets using Guided process. Select target type in drop down of "oracle database, Listener and Automatic Storeage management". The click Add Using Guided Discovery. Here the agent will immediately scan the host and show the results which you can then complete the target addition process.
If I am misunderstanding you please let me know.
Dave

Oracle Enterprise Manager Cloud Control 12c Release 1 (12.1.0.1) for Window

Hi,
When we run the setup.exe (Disk 1) on windows machine, Installation Wizard does not appear. So we couldn’t go ahead further steps for the installation. Please help us.
Thanks,
Jebastin.

I have see similar issue...
Please validate whether there is any Anti Virus installed on your Windows machine...
If it is installed, disable it temporarily... The Anti Virus typically blocks such Installers.exe which are about to generate more than 65535 files...
Second possibility can be you don't have enough permission i.e. you don't have Admin permission on this Windows machine...
Third possibility can be that the installer in itself might be corrupt...

Cloud Control 12c: Configuration Details Error

Hi,
I'm currently in the process of installing the Oracle Enterprise Manager Cloud Control 12c, after typing the configuration details (step 5 of 8), I get an error popup window stating the following:
The following prerequisite check failed because the ORacle Database, where the Management Repository will be configured, does not meet the configuration requirements. Fix the issue manually base on the recommendation offered for this prerequisite, and click OK. For more details check the logs: /oraInventory/logs/emdbprereqs
Prereq Name:
Check the compatible instance prarameter value.
Recommendation:
The compatible instance parameter must be set to the same version value as the database instance of the EM repository.
When I check the repos_perf.log, I see the following fails:
Executing Prereq Action
executing Action: select count(*) from v$log where 300000000 > bytes
output: 3
Prerequisite failed
Running component repos_perf Done
Executing component :repos_perf
Running component repos_perf Done
How can I set parameter?
Thanks,
Olivares

Hi Olivares,
Assuming your question is about setting the compatible initialization parameter, you can connect to the repository database (e.g. using sqlplus as user system or sys) to execute the following command, then restart the database:
ALTER SYSTEM SET COMPATIBLE = <value> SCOPE=SPFILE;
EX:
ALTER SYSTEM SET COMPATIBLE = '11.2.0.0.0' SCOPE=SPFILE;
If necessary, see the following doc for guidance on the parameter value:
http://docs.oracle.com/cd/E24628_01/install.121/e22624/appdx_about_emprereqkit.htm#CIHHBGFD
Regards,
- Loc

SQL script with host command job in Enterprise Manger Grid Control

I use Enterprise Manger Grid Control 10.2.0.5 and need to create SQL script job on database instance target on unix/linux platform.
I have problem with os command inside sqlplus script.
For example for the simple command: SQL> host ls
I get the message in output log: SQL> SQL> SQL> SQL> SQL> SQL> /bin/bash: ls: command not found
Can anyone help me?
Thank you.

Hi,
Make sure you have granted all necessary rights (log on as a batch job etc.) to the user used in the prefered credentials.
Cheers,
Kenneth

EM Cloud Control 12c has no databases

Hello @ all,
i've installed Enterprise Manager Cloud Control 12.1.0.2.0 on a virtual machine with RedHat Linux 6 and configured the EM by installing it so, that he should connect to my test database server with Oracle 11g 11.2.0.3.0 to watch over that. The installer get a valid connection to that database server.
Now, after install, i want to test the connection. So i started the Overview of EMCC in my browser, connected as SYSMAN, selected the "Database Home" and at the frame "Database Loadmap" there displays the message "no databases available". But the database at the test server is running without any problem:
lsnrctl status
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 07-JUN-2013 09:39:52
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dbtest2.berl.axway.int)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date                17-MAY-2013 10:05:48
Uptime                    20 days 23 hr. 34 min. 3 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /home/oracle/srv/ora/product/11.2.0/dbtest_2/network/admin/listener.ora
Listener Log File         /home/oracle/srv/ora/diag/tnslsnr/dbtest2/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dbtest2.berl.axway.int)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dbtest2.berl.axway.int)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "<hostname>" has 1 instance(s).
Instance "<hostname>", status READY, has 1 handler(s) for this service...
Service "<hostname>" has 1 instance(s).
Instance "dbtest2", status READY, has 1 handler(s) for this service...
The command completed successfully
SQL> select * from v$instance;
INSTANCE_NUMBER INSTANCE_NAME    HOST_NAME                                                        VERSION           STARTUP_TIME        STATUS       PAR    THREAD# ARCHIVE LOG_SWITCH_WAIT LOGINS     SHU DATABASE_STATUS   INSTANCE_ROLE     ACTIVE_ST BLO
              1 dbtest2          dbtest2                                                          11.2.0.3.0        06/06/2013 09:51:08 OPEN         NO           1 STARTED                 ALLOWED    NO ACTIVE           PRIMARY_INSTANCE   NORMAL    NOAlso the agent of EMCC is running too:
./emctl status agent
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Agent Version     : 12.1.0.2.0
OMS Version       : (unknown)
Protocol Version : 12.1.0.1.0
Agent Home        : /path/to/agent_inst
Agent Binaries    : /path/to/oracle/agent/core/12.1.0.2.0
Agent Process ID : 2814
Parent Process ID : 2768
Agent URL         : https://<hostname>:3872/emd/main/
Repository URL    : https://<hostname>:4903/empbs/upload
Started at        : 2013-06-07 11:18:13
Started by user   : oracle
Last Reload       : (none)
Last successful upload                       : (none)
Last attempted upload                        : 2013-06-07 11:18:36
Total Megabytes of XML files uploaded so far : 0
Number of XML files pending upload           : 73
Size of XML files pending upload(MB)         : 0,27
Available disk space on upload filesystem    : 45,74%
Collection Status                            : Collections enabled
Heartbeat Status                             : Agent is blocked
Last attempted heartbeat to OMS              : 2013-06-07 11:39:36
Last successful heartbeat to OMS             : (none)
Next scheduled heartbeat to OMS              : 2013-06-07 11:42:36
Agent is Running and ReadySo what could i do more to find out the problem? Which logs would you need for more information?
Thanks a lot and best regards,
David

After some minutes he was ready with resyncronisation. But now the EM Console told me, that the agent woulnd't be available.
So i looked for it:
emctl status agent
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Agent Version     : 12.1.0.2.0
OMS Version       : 12.1.0.2.0
Protocol Version : 12.1.0.1.0
Agent Home        : /path/to/oracle/agent/agent_inst
Agent Binaries    : /path/to/oracle/agent/core/12.1.0.2.0
Agent Process ID : 4529
Parent Process ID : 4483
Agent URL         : https://<hostname>:3872/emd/main/
Repository URL    : https://<hostname>:4903/empbs/upload
Started at        : 2013-06-07 14:32:22
Started by user   : oracle
Last Reload       : (none)
Last successful upload                       : 2013-06-07 14:53:07
Last attempted upload                        : 2013-06-07 14:53:12
Total Megabytes of XML files uploaded so far : 0,09
Number of XML files pending upload           : 13
Size of XML files pending upload(MB)         : 0,01
Available disk space on upload filesystem    : 45,32%
Collection Status                            : Collections enabled
Heartbeat Status                             : Ok
Last attempted heartbeat to OMS              : 2013-06-07 14:52:28
Last successful heartbeat to OMS             : 2013-06-07 14:52:28
Next scheduled heartbeat to OMS              : 2013-06-07 14:53:28
Agent is Running and ReadyAlso a ping to OMS is successfully:
emctl pingOMS
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
EMD pingOMS completed successfullyEmctl upload says the same:
emctl upload
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
EMD upload completed successfullyBut why is the agent now not available?
EDIT: i've restarted the agent and now he is up!!! Yes!
But in home screen he also tels me, that he can't find a database :(
Edited by: David_Pasternak on 07.06.2013 03:59

How to disable autostart of Enterprise Manager Cloud Control (EMC12cr2)

Hi Everyone,
I am new to Oracle Enterprise Manager Cloud Control 12c Release 2 ( EMC12cr2)
Recently, I have installed EMC12cr2 on Oracle Linux 6.3. I follow one document to install, and It was ok after the installation.
But after I reboot the testing server, I found out that it is very slow as the EMC12cr2 services are auto start at boot such OMS, and agent.
So could you please tell me how to disable the EMC12cr2 or OMS service from auto startup, so that it makes the system reboot faster.
Thanks in advance,

Take a look at this article on My Oracle Support - 1478617.1
It's a little older, but the same idea applies. There is a script in /etc/init.d/ called gcstartup, you can comment out the startup lines in there with a hashtag.

Creating Standby database using Cloud Control 12C

Hi,
I want to setup Standby database for my existing RAC database, Both standby and PRimary databases are on 11.2.0.3 and we are using "Cloud Control 12C".
After specifing and testing the Host creddential and Database credentials and choosing the Backup method when I click next I get following error message
"Username- The Specified user must own the source database oracle server installation."
I am giving the host credential as oracle, we use single os user "Oracle" for all our installation and administration.
This is AIX OS and 11.2.0.3 database installation.
Any help will be appreciated.
Regards
Bhushan

Guys,
After searching for 2 days on web and raising question on OTN, in the last we resolved the issue. The issue was registering the primary database with correct oracle binaries.
We have 2 set of binaries Oracle Infrastructure and Oracle RDBMS, The database was register in 12C with Oracle Infrastructure binaries. I changed that and every thing is working soomth.
regards
bhushan

Cloud Control 12c monitoring Oracle 11g Standard Edition alert.log

Hi guys.
I just installed Cloud Control 12c3 and added my cluster database, I have readed many papers, tech docs and tech discuss and now i have a huge confussion about packs, licensing and other fruits. Please help...
I have four Oracle 11g databases (differents hosts) Standard Edition, and i want monitoring and notificate alert.log errors. For example, if alert.log says "ORA-01438, blablabla" i want a email notification.
I read about packs, and says that "diagnostic pack" is needed for alert.log monitoring in Cloud Control 12c. But my version database is Standard Edition without packs, so I CAN'T MONITORING ALERT LOG!!!.
Question:
Do I really need Diagnostic Pack for monitoring alert.log with Cloud Control?
If Diagnostinc Pack is not necessary, how can i monitoring alert.log?
Thanks

I do not think you require any pack for alert.log content monitoring but you might need to check with Oracle rep. I am saying so because if you go to the "Alert log content" page and click on management pack for this page, Grid will display a message that this page does not require any pack.
Go to the Alert log content by "oracle database -> logs -> alert log contents"
then
go to SETUP -> management packs -> packs for this page
You will see the message will be displayed " this pages does not require any pack"
Can you also provide the doc where it says that this pae needs diagnostic pack?

Cloud Control 12c identifies unused Weblogic version on Managed Server

I'm using Cloud Control to monitor our domain. In this case I upgraded from WebLogic 10.3.1 to Weblogic 12.1.2.0.0 by installing 12c on a separate Oracle/Middleware/Oracle_Home and updateing the startup script to use this new WL_Home location.
The Weblogic 10.3.1 installation is still there.
When I connect through Cloud Control to discover the Middleware Targets (WebLogic) it identifies my server as being 10.3.1
I checked the path and classpath in the startup script and there are no references to the 10.3 path. How is the cloud control agent finding the inactive one ?
any help is appreciated

For the error messagee:
Shell path is incorrect or not defined.:/usr/local/bin/bash(SH_PATH),-c(SH_ARGS) on host XXX. Check the property values in the following files in this order, ssPaths_<plat>.properties or sPaths.properties or Paths.properties, in "/oracle/em12c/oms/oui/prov/resources" directory.For more details, refer to the Oracle Enterprise Manager Basic Installation Guide.
yes , you are suppose to change the shell patch as its at a different location.
The file where you have to chnage is: $<OMS_HOME>/oui/prov/resources/hpi.properties and change the variable: SH_PATH=
Try the agent deployment
On your another question: deploy manual agent , you have to get the em12c agent binaries usings elf update console. For information on Self Update and how you can use it to download the software, see the chapter on Self Update in the Oracle Enterprise Manager Cloud Control Administrator's Guide.
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/self_update.htm#CACBHCBH

Performance tab in Cloud Control 12c

Hi guyz,
How can I activate Performance tab in EM Cloud Control 12c? Do I need any license or is there light version?
In Grid Control 11g it was easy to activate.
Thank you beforehand.

Could you please confirm the Database Diagnostic Pack and Oracle Tuning Pack is enabled for the database.
From the Setup -> Management Pack -> Management Pack Access
To enable the Management Pack for Oracle Database:
From the Setup menu, select Management Packs, then select Management Pack Access.Enterprise Manager Cloud Control displays the Management Pack Access page.
In the Management Pack Access page, from the Search list, select Database ===> It will lists all the Oracle Database targets being monitored.
From the table, for the select your Oracle Database target and enable the Oracle Diagnostics Pack, Oracle Database Tuning Pack and click Apply.
For licensing information on the Oracle Diagnostics Pack and Oracle Tuning Pack
Ref to:
http://docs.oracle.com/cd/E24628_01/doc.121/e24474/toc.htm
Understanding the Management Packs in Enterprise Manager (dbconsole, grid control and cloud control) (Doc ID 1566956.1)

Monitoring using Enterprise Manger (Cloud Control 12c)

Similar Messages

Maybe you are looking for