Monitoring using headphones

what's up yall? i have a problem that seems simple but can't figure it out.
i'm using apogee's rosetta 800 with logic. the rosetta has 8 ins/outs which are being used with a mackie 1202. outputs 1&2 of rosetta are on lines 9/10 of mackie and the alt 3/4 (bus) outputs of mackie are going to lines 1/2 on the rosetta. i can hear the heaphones when monitoring everything connected to the mackie. however, i have an avalon preamp which is feeding input 3 on the rosetta. what equipment do i need to hear the mic when recording vocals? the rosetta has no headphone jacks like the mackie. i don't want to use the mic pres on the mackie. i have a headphone amp but don't know how to hook everything up. any suggestions anyone? thanx in advance.

Usually I'll use the mixer in the interface to create your submixes for headphones and send them out individual outs, either pached to the HP amp or into the mixer. Let me know if I went throught oo fast.
J

Similar Messages

  • Is it possible to use headphones with the digital AV-adapter w/ iPad 3?

    Hi there.
    Just wondering if its possible to show video on my monitor with HDMI and simultaneously use headphones through 3.5 on the iPad 3/iPhone 4S?
    This is because the monitor i will use doesnt have loudspeakers.

    No, this is not possible.  It would be like dialing your own phone number.  You must verify an additional new email address for your second iPad.  See the following link which will tell you how to do this.  You will need to add this new address to Facetime app in one of your iPads.
    http://support.apple.com/kb/HE68

  • How do I get more volume when watching a movie and can I use headphones?

    How do I get more volume when watching a movie? And can I also use headphones?

    Many governments now limit how loud headphones can go. Europe has been plagued with this for many years. Separate amplifiers are available.  
    I believe volumes should be kept at reasonable levels to avoid hearing loss, but it's not the governments job to protect me.
    I prefer Beyerdynamic over Bose Headphones. (They spend a lot less money on advertising.)
    http://www.amazon.com/beyerdynamic-DT770-PRO-250-ohm/dp/B0006NL5SM/ref=sr_1_1?s= electronics&ie=UTF8&qid=1308969660&sr=1-1

  • How to connect my guitar into my new 13'' macbook pro using headphone's port?

    how to connect my guitar into my new 13'' macbook pro using headphone's port?

    you need a standard guitar cable and a 1/4 inch to 1/8 inch adapter such as this http://www.amazon.com/Recoton-CW1521-4-Inch-8-Inch-Adapter/dp/B00006HOIW

  • HDTV as external monitor using ethernet connection

    Hello,
    I want to connect my HDTV to my iMac and use it as an external monitor.
    My HDTV is about 25 ft away from my iMac.
    A HDMI cable of that length cost over 200 $.
    So, its not an option to me.
    I just bought a smart rooter but my HDTV Panasonic Viera P50GT30 is not a smart TV.
    It needs a DLNA server and I can't find one.
    Question : Is there a way to use my HDTV as an external monitor using the Ethernet or Wifi connection?
    Thank's,
    Pierre.

    This look's good.
    http://www.startech.com/AV/Extenders/HDMI/HDMI-over-IP-Extender-with-Audio~IPUSB 2HD2
    But its not.
    OS Compatibility                                                                                                                                                                  Windows® XP(32bit)/ Vista(32/64bit)/ 7(32/64bit) Aero themes supported

  • The volume keys on my MacBook Pro stop working after using headphones.

    The volume keys on my MacBook Pro recently stopped controling the volume after I've used headphones. I still have sound; I just can't make the volume increase or decrease. The mute, however, still works just fine. Because I have sound from the intenral speakers I know the computer doesn't think the headphones are still in the jack. A reboot fixes the problem, but as soon as I use headphones the problem starts up again. I want to fix this permanently.
    I don't know if this helps but all the other keys (brightness, play/pause, etc) still work. I recently had to reset the PRAM because my computer refused to sleep when the lid was shut. I've checked system preferences and everything seems to be in order.
    Can someone please help!?

    I found this advice on another thread after encountering the same problem - I did the reboot and it worked fine and dandy!
    I spoke with Applecare to fix my Macbook volume. Apparently there are pins inside the speaker/headphone jack that can get jammed. We fixed mine by doing some sort of reboot:
    Turn off laptop.
    Hold down the Option, Command, P, and R keys (all four at once, it's tricky!) and while holding down the four keys, turn on the computer. When you hear the second chime, release the four keys.
    This re-set the sound toggle to internal speakers. Now I'm afraid to insert headphones again, but I assume this reboot will work over and over.

  • My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • Can you hook up a monitor using hdmi?

    Hi I am using a Cintiqi Display and would like to add another monitor using the other port HDMI is that possible or do I need to do something else. I just wanted another display to watch videos to learn how to do some Adobe products and thought it be easier to watch it on a monitor while I work on the products ...kind of step by step process. 
    thanks for any help  Maggie

    Not all or even many monitors have HDMI ports but it does have one yes it can be connected. You can also use a HDMI to DVI adapter, in fact Apple include such an adapter in the Mac mini box.
    There is one issue you need to consider though, the Mac mini only supports a maximum resolution of 1920x1200 pixels on the HDMI port. If you monitor has a higher resolution then this may not be the best solution.
    Your other alternative is to get a USB Displaylink adapter to allow connecting a monitor via USB.

  • I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

    I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
    I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
    The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

    The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
    So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
    As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

  • How do you get your tv to act as a monitor using apple tv?

    Can you get your television to act as a monitor using Apple TV?

    I presume you mean you want to view your computer screen on your TV by going through the Apple TV. Right now you can't do that but the next version of Mac OS X, 10.8 Mountain Lion, will allow Mac computers to mirror their computer screen on a TV connected to Apple TV.

  • Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz  The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:  Is there any way of fixing this? I've tried

    Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
    The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
    Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
    Question 2 (related):
    This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
    Thanks for reading this.
    el7

    Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
    If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
    -USB-to-VGA
    http://www.cablestogo.com/product/30545
    -Convert s-video or composite video signals to high resolution VGA
    http://www.cablestogo.com/product/40971
    The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
    el7

  • External monitor using separate menu bars

    I got an external monitor plugged in. Is it possible to run separate menu bars on each monitor? Menu bars corresponding to the applications on each monitor?

    Only the foremost application's menus are visible on the menu bar. The foremost application will span both monitors.
    It's not possible to have two different applications both active on different monitors.
    You can however duplicate the menu bar of the foremost application on the second monitor using shareware programs. Try MenuEverywhere if that's what you wanting to do.

  • Can the last link in a thunderbolt daisy-chain be a non-thunderbolt monitor using miniDisplay port?

    Can the last link in a thunderbolt daisy-chain be a non-thunderbolt monitor, using miniDisplay port?
    For example, Mac mini <--> external SSD <--> apple cinema display 30" (using miniDisplay port adaptor plugged into the SSD's second thunderbolt port)

    TechnoMax wrote:
    for instance STAE122 or STAE 127?
    FWIW, STAE129 is the current version TB adapter
    that is self powered and has TB daisy chain port.
    STAE122 and STAE127 are older versions and
    not the current model, though there may be stock of
    these around.  As to whether this will solve your issue,
    I don't know.
    Can I trick the Mac under Bootcamp as OS to use HDMI for the monitor? Dell officially says that the monitor can only accept 1900x1080 over HDMI, but some have fiddled wth different computers with custom settings that worked with some Monitors but mostly under Linux and to Dell 2711.
    The MacMini HDMI port is hardware limited to 1980x1200.

  • Can I use headphones/headsets with my ipad3 because they arnt included in the ipad box so have any of u used it and from where I can have them ?

    Can I use headphones/headsets with my ipad3 because they arnt included in the ipad box so any of u used it and from where I can have them ?

    Yes you can use earphones or earbuds. You can use iPhone or iPod earbuds and there are many other headphones that will work with the iPad - and bluetooth headphones wiill work as well.

  • Distorted sound using headphones with my iPhone 4

    Hello,
    I have a strange and very annoing problem that I am currently experiencing with my iPhone 4.
    Basically I have a problem where when I insert my Headphones (The Genuine Apple Headphones with Mic) into the iPhone 4, every now and then I hear popping sounds and this also happens when I unplug the Headphones from the phone too. The major problem with this is that when I listen to music the Bass effects seem very distorted, to the point of which you have to turn the music up so loud to fix the problem that it deafens you. If you turn the music down low then all you can hear is a very deep bass kind of sound.
    This problem doesnt just happen with music, its with whatever sound I play (whether from a video on YouTube, or saved on my phone, to Music on my iPhone and sounds on the iPhone itself.).
    I cant tell if the iPhone speakers themselves are distorted however I dont think they are, I have listened to music through the speakers on the phone and they seem to be all OK, although I havent done any proper testing, this problem only occurs with using Headphones.
    I have tried a restore in iTunes and this has not helped. The iPhone is running the latest and greatest system from Apple, in my case as I am writing this it is iOS 5.1.1.
    The iPhone has had a service just recently as the iPhone's home button was not working, but it was fine after that. I have not dropped the phone either.
    Could you please help me?
    Thanks!

    Could you clean the connector with cotton swab?I fear there is debris in the connector.
    If it is the same,I think it should be open for major repair.

Maybe you are looking for