Monitoring using Openview

Does anyone monitor their appliances using openview? If so, how?

Does anyone monitor their appliances using openview? If so, how?
Hi Nirender,
Did you get any other private responses to your message? I asked internally, and one of our folks said that HP Openview supports both SNMP Traps and SNMP polling. I hope that helps you with your monitoring.
Regards,
Cordelia

Similar Messages

  • HDTV as external monitor using ethernet connection

    Hello,
    I want to connect my HDTV to my iMac and use it as an external monitor.
    My HDTV is about 25 ft away from my iMac.
    A HDMI cable of that length cost over 200 $.
    So, its not an option to me.
    I just bought a smart rooter but my HDTV Panasonic Viera P50GT30 is not a smart TV.
    It needs a DLNA server and I can't find one.
    Question : Is there a way to use my HDTV as an external monitor using the Ethernet or Wifi connection?
    Thank's,
    Pierre.

    This look's good.
    http://www.startech.com/AV/Extenders/HDMI/HDMI-over-IP-Extender-with-Audio~IPUSB 2HD2
    But its not.
    OS Compatibility                                                                                                                                                                  Windows® XP(32bit)/ Vista(32/64bit)/ 7(32/64bit) Aero themes supported

  • Can you hook up a monitor using hdmi?

    Hi I am using a Cintiqi Display and would like to add another monitor using the other port HDMI is that possible or do I need to do something else. I just wanted another display to watch videos to learn how to do some Adobe products and thought it be easier to watch it on a monitor while I work on the products ...kind of step by step process. 
    thanks for any help  Maggie

    Not all or even many monitors have HDMI ports but it does have one yes it can be connected. You can also use a HDMI to DVI adapter, in fact Apple include such an adapter in the Mac mini box.
    There is one issue you need to consider though, the Mac mini only supports a maximum resolution of 1920x1200 pixels on the HDMI port. If you monitor has a higher resolution then this may not be the best solution.
    Your other alternative is to get a USB Displaylink adapter to allow connecting a monitor via USB.

  • How do you get your tv to act as a monitor using apple tv?

    Can you get your television to act as a monitor using Apple TV?

    I presume you mean you want to view your computer screen on your TV by going through the Apple TV. Right now you can't do that but the next version of Mac OS X, 10.8 Mountain Lion, will allow Mac computers to mirror their computer screen on a TV connected to Apple TV.

  • Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz  The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:  Is there any way of fixing this? I've tried

    Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
    The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
    Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
    Question 2 (related):
    This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
    Thanks for reading this.
    el7

    Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
    If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
    -USB-to-VGA
    http://www.cablestogo.com/product/30545
    -Convert s-video or composite video signals to high resolution VGA
    http://www.cablestogo.com/product/40971
    The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
    el7

  • External monitor using separate menu bars

    I got an external monitor plugged in. Is it possible to run separate menu bars on each monitor? Menu bars corresponding to the applications on each monitor?

    Only the foremost application's menus are visible on the menu bar. The foremost application will span both monitors.
    It's not possible to have two different applications both active on different monitors.
    You can however duplicate the menu bar of the foremost application on the second monitor using shareware programs. Try MenuEverywhere if that's what you wanting to do.

  • Can the last link in a thunderbolt daisy-chain be a non-thunderbolt monitor using miniDisplay port?

    Can the last link in a thunderbolt daisy-chain be a non-thunderbolt monitor, using miniDisplay port?
    For example, Mac mini <--> external SSD <--> apple cinema display 30" (using miniDisplay port adaptor plugged into the SSD's second thunderbolt port)

    TechnoMax wrote:
    for instance STAE122 or STAE 127?
    FWIW, STAE129 is the current version TB adapter
    that is self powered and has TB daisy chain port.
    STAE122 and STAE127 are older versions and
    not the current model, though there may be stock of
    these around.  As to whether this will solve your issue,
    I don't know.
    Can I trick the Mac under Bootcamp as OS to use HDMI for the monitor? Dell officially says that the monitor can only accept 1900x1080 over HDMI, but some have fiddled wth different computers with custom settings that worked with some Monitors but mostly under Linux and to Dell 2711.
    The MacMini HDMI port is hardware limited to 1980x1200.

  • Add and Remove Publishers from Replication Monitor using T SQL

    Is there any possibility to add an Publishers from Replication Monitor using T SQL.i am trying to configure the replication using T SQL..i can create all other steps but didn't find any way to add publisher to the replication monitor..kindly suggest..

    Hi Snehasis,
    Tom is correct, there is no T-SQL command to add a publisher to Replication Monitor.  However, the server from which you launch Replication Monitor will automatically be added to Replication Monitor if it is a Publisher.  Also, you can add additional
    Publishers using the Add Publisher dialog.
    This is covered in
    Add and Remove Publishers from Replication Monitor
    Brandon Williams (blog |
    linkedin)

  • Idoc monitoring using WE06

    Hi all,
    I want to do Idoc monitoring using the tool Active Idoc Monitoring(Programm: RSEIDOCA;Transaction : WE06).
    So when ever something goes wrong in an Idoc,depending on the idoc type ,I want to inform the concerned person by email using SAP mail( Business Workplace).
    My questions are with regard to the 2 possibilities(I thought) stated below for achieving this.
    [1]
    Is it possible to directly send an email to the SAP mail inbox of the concerned person,using this program depending on the Idoc type and other conditions if they exists .Because depending on the idoc type different users need to be informed of the error.
    I made a variant as said below in the link.
    http://help.sap.com/saphelp_470/helpdata/En/dc/6b81b943d711d1893e0000e8323c4f/frameset.htm
    Is it possible to test this case immediately by sending a error ORDERS Idoc.If yes,How?
    Is the configuration said in the above link sufficient or Is there any need to make any further changes.
    OR
    [2]
    Using transaction WE06,I want to the send the email to my sap mailBox and from there forward it to other users depending on the conditions said above.
    How could I achieve it? Test it immediately
    I would like to go forward with this 2nd solution,if thats better and easily configurable.
    How to configure this scenario.
    Any help is greatly appreciated.
    Regards
    K

    Closing this thread.Moving it to a more appropriate forum.

  • How to mirror to tv monitor using macbook pro 2012

    how to mirror to tv monitor using macbook pro 2012.  The airplay is not displayed anywhere except I Tunes which only plays what is on I Tunes.

    Howdy there nell a-7,
    It sounds like you are not seeing the Airplay icon in the menu bar on your Mac but you do see it in iTunes. I would use these steps from the following article to help troubleshoot the issue:
    iOS: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    Try these steps first
    Verify that your iOS device's software is up to date.
    Verify your Apple TV's software is up to date.
    Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
    All AirPlay-enabled devices must be connected to the same Wi-Fi network.
    Some Wi-Fi network configurations offer a Guest Network. On your Apple TV, go to Settings > General >Network and ensure that you're connecting to the same Wi-Fi network on your iOS device. On your iOS device, tap Setting > Wi-Fi and confirm that this matches your Apple TV.
    If the AirPlay icon doesn't appear
    Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.If you are still unable to see the AirPlay icon  , try one of the following steps:
    If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
    Check Internet or network connectivity on all affected devices.
    Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
    If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
    Here is some additional information about Airplay for Mac:
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/HT5404
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Hi! hooked up my new macbook pro to my LGE2442 monitor using a MDP to HDTV cable and the monitor resolution is terrible. suggestions? thanks!

    hi! hooked up my new macbook pro to my LGE2442 monitor using a MDP to HDTV cable and the monitor resolution is terrible. suggestions? thanks!

    thanks, guys mirror on/off didn't make a difference and there were no resolution options with the cable. switched to a VGA adaptor and all is working great now! cheers

  • Dual monitor use on iMac 24"

    Can I hook up another monitor to the iMac for dual monitor use. Looks like it
    can be done looking through the post, just want to make sure.
    Thanks

    Yes you will need this cable.
    http://store.apple.com/us/product/M9321G/B?fnode=MTY1NDA3Ng&mco=MTUzNTQ

  • CHaRM, TMS, Monitoring using WILY Interoscope, Maintenance Optimizer

    Hi Folks,
    I am in urgent need of the configuration guide of SolMan 4.0.
    as I want to implement CHaRM, TMS, Monitoring using WILY Interoscope, Maintenance Optimizer.
    Also clearify the below mention doubts.
    Scenario:
    SAP is already implemented and Sol Man 4.0 is also installed.
    We have 6 landscape of XI, BI, APO, CRM, SRM, HR, EP.
    Also TMS is configured already for each and every system.
    Doubts:
    1. Can we do transport managment by using SolMan while we dont want to implement CHaRM.
    2. Do we have to define the TMS again in the SolMan  including routes and TDC or just we have to add the satellite systems with Sol Man.
    3. What would be the detail steps for this.
    Mail me docs at [email protected]
    Thanks in advance.
    Regards,
    Akshay

    Akshay Shail wrote:>
    > I am from SAP Partener company. Do we have to pay any thing to get RKT PDFs.
    >
    > I would be very thankful of u if u will forward me PDFs at [email protected]
    Hi Akshay,
    as a registered SAP Partner, you should have access to
    [SAP Support Portal - http://www.service.sap.com/support |http://www.service.sap.com/support]
    Here you find all learning material from Ramp-Up Knowledge Transfer (RKT) for SAP Solution Manager 4.0.
    [Ramp-Up Knowledge Transfer - SAP Solution Manager - http://www.service.sap.com/rkt-solman|http://www.service.sap.com/rkt-solman]
    The documents PDFs, SAP Tutor sessions, ... may not be distributed or forwarded to you via E-Mail.
    Best regards,
    Ruediger

  • How do i add Linux systems to be monitored using Virtual agent/SNMP in OLT?

    Dear All,
    I need to know the process to add Linux systems to be monitored using Virtual agent and SNMP in OLT ?
    I have added my details to Virtual agent and chosen ssh and all i get is cannot connect
    Appreciate if someone can give me the detailed screenshot by screenshot process.
    Regards
    Praveen

    On 05/13/2010 09:30 AM, Raja Vengala wrote:
    >
    Yes, the problem is with the old packaged PLINK.exe. Downloaded version is working smoothly. Any reason for shipping the old version ??
    From: Mikael Fries
    Sent: Wednesday, May 12, 2010 11:56 PM
    To: Praveen Arora; Drupad Panchal; Matthew Demeusy; Ashish Dave; Raja Vengala
    Subject: RE: OLT Linux system moniting issue
    Praveen
    I have set up LINUX and virtual agent configs a couple of times, and it has worked pretty ok.
    What I found was that you might have to download a newer version of PLINK.exe and put that onto your OLT system.
    (with the packaged version, I also had some communication issues)
    Try to download the lates plink.exe and see if that works…
    (you may want to restart you system after replacing plink.exe)

  • Maximum number of monitors used for remote desktop not working correctly

    My goal is to connect from my home to my work machine but limit the number of monitors used to 2.
    At work, I have a machine running Windows 7 Enterprise SP1 with dual monitors. My home machine is Windows 8.1 Pro and it has 3 monitors (on two video cards).
    I followed the instructions of the MSDN blog post about using multiple monitors for remote desktop but cannot get it to work right.
    Here's what I see when I modify the group policy setting "Limit maximum number of monitors" on the target (work) machine:
    Setting - Result:
    1 - 1
    2 - 1 (???)
    3 - 3
    It looks like I can't limit the number of monitors used to 2, I get either one or all. Am I missing something or is this by design?
    Max

    Hi Max,
    Support for multiple monitors is available when connecting from any Windows 7/8.1 computer, however, there are restrictions when connecting to a computer using multi-monitor mode. When connecting to Windows 7 computers, only computers that are running Windows
    7 Enterprise or Ultimate can be connected to in multi-monitor mode. When connecting to Windows 8.1, only computers that are running Windows 8.1 Professional or Enterprise can be connected to in multi-monitor mode.
    Karen Hu
    TechNet Community Support

Maybe you are looking for