Monitoring WCI 10.3.0 & UCM 10.1.3.5 using OEM 11g R1

As part of the Service Monitoring for our OFM-OUCM environment, we have implemented OEM 11g R1. Our Dev/Test/UAT/Prod environment is comprised of SOA 10.1.3.5, WCI 10.3, UCM 10.1.3.5, multiple DB instances 10.2.0.3/10.2.0.4, IDM 10.1.4.0.1. We are able to monitor SOA 10.1.3.5, IDM 10.1.4.0.1 & the databases. But the 11g Agent wasnt able to discover the targets for WCI 10.3.0 & UCM 10.1.3.5. Is there a way to monitor UCM 10gR3 & WCI 10.3 using OEM 11g R1 or do we need to downgrade the OEM version.
We are able to see the WCI Products in the Hosts -> Configuration tab in OEM. But we are not able to monitor these as targets.
WebCenter Interaction API Service 10.3.0.0.0
WebCenter Interaction Automation Service 10.3.0.0.0
WebCenter Interaction Content Upload Service 10.3.0.0.0
WebCenter Interaction Directory 1.0.0.0.0
WebCenter Interaction Document Repository Service 10.3.0.0.0
WebCenter Interaction Identity Service for LDAP 10.3.0.0.0
WebCenter Interaction Image Service 10.3.0.0.0
WebCenter Interaction Notification Service 1.0.0.0.0
WebCenter Interaction Portal 10.3.0.0.0
WebCenter Interaction Remote Portlet Service 1.0.0.0.0
Thanks

Did you check http://www.oracle.com/us/products/enterprise-manager/039537.pdf ?
and http://www.oracle.com/technetwork/oem/soa-mgmt/index.html
MANAGEMENT PACK FOR WEBCENTER SUITE
Regards
Rob
http://oemgc.wordpress.com

Similar Messages

  • Using OEM to monitor Data Guard database

    Can someone please send me the link or docs of how to use OEM monitoring data guard? In specific, I would like to use OEM to monitor and be sure logs are applying to stand by site.
    Any ideas?

    Hello ,
    I will extend the document on the Fast Failover feature one of these days.
    What you need to do is:
    For using Fast Failover, you need to configure the Data Guard observer process.
    The configuration of this process can be done by selecting the Fast-Start Failover Disabled link on the Data Guard page of the database (Primary or Standby).
    You will be automatically redirected to the Fast-Start Failover: Configure Page.
    From this page you can do the configuration of the DG observer process, that then will enable you to activate the Fast Failover feature.
    Regards
    Rob
    http://oemgc.wordpress.com

  • I cannot afford an iMac, can anyone recommend a widescreen Monitor for my 15" MacBook Pro.  It would be used mainly for iPhoto and Aperture.

    I cannot afford an iMac, can anyone recommend a widescreen Monitor for my 15" MacBook Pro.  It will be used mainly for iPhoto and Aperture.  TF

    Pair a wireless KB with the laptop and all should be well when you attach the laptop to the iMac and invoke TDM. But as Denny mentions, it does seem like the waste of a good iMac to use it in just this configuration. Why is the laptop primary?

  • Whether  OEM 11g[without AMP]  monitor  non-database nodes  like  EBS node?

    Hi,
    Please let me know whether OEM 11g grid is capable of monitoring the OS level parameters like memory,server load,processes running etc [ although through  user defined metrics  shell scripts etc] for R12 EBS
    Major concern here , situation is requiring NOT to go for the licensing of AMP[ Application MAnagement Pack]
    So what ever is possible to be monitored on the EBS application nodes, it is good.
    Please suggest how to do on this , if possible.
    Regards
    GSN

    OK pay attention now ;-)
    I am under the assumption that you want to monitor Host resource usage like CPU, MEM, I/O etc.
    Meaning this would be the same approach for any kind of server, so also for an EBS server.
    Still you should realize that if you want to relate Host level resource consumption to a specific EBS Task / Activity, you still have to be able to understand there relationship etc., which might mean (depending) on your knowledge of EBS and the way it is implemented on a Webserver or whatsoever, is still a difficult task.
    You should assure yourself that you do not really need the EBS Apps Management Pack for this.
    What is you Job role within the organization?
    Regards
    Rob
    http://oemgc.wordpress.com

  • Oracle VM Monitoring Using OEM

    Hi,
    We need to monitor Oracle VM using OEM, we have Oracle VM setup with Two Guest servers (Linux and Windows 2003 server).
    we have OEM 10.2.0.5.0 setup, and enabled Oracle VM Management Packeage also.
    Could you please help someone, how to configure and monitor Oracle VM using OEM.

    Hi vdosi,
    Thanks for ur promy reply....
    am just confusing abt this configaration....first we need to register virtual server in OEM console or create virtual server pool....but while registering Virtual server
    it telling "You are not yet licensed to use the Oracle VM Management Pack. If you like this functionality, please see your super administrator about obtaining a license"
    In our Oracle VM server, we are created Two Guest server (Windows 2003, RHEL 4)..Now we need to monitor Oracle VM and two guest servers....How can do this...if it possible...can u send me the document......please help me on this.....
    thanks in advance..
    Jayaram

  • How i use OEM 12c to monitor Microsoft Active directory.

    Hi,
    How i use OEM 12c to monitor Microsoft Active directory.Please assist me on this.
    Thanks,
    Sagar

    Hi,
    The fundamental problem with this scenario is that you have non-failover capable modules in a failover chassis - think of the ASA failover pair as one device and the IPS modules as two completely separate devices.
    Then, as already mentioned, add only the primary ASA. (The secondary will never be passing traffic in standby mode so it's not actually needed in MARS) Then, with the first IPS module you can add it as a module of the ASA or as a standalone device (MARS doesn't care). With the second IPS module the only option is to add it as a separate device anyway.
    In a failover scenario the ASA's swap IP's but the IPS's don't so whereas you'll only ever get messages from the active ASA you'll get messages from both IPS IP's depending on which one happens to be in the active ASA at the time.
    Don't forget that you have to manually replicate all IPS configuration every time you make a change.
    HTH
    Andrew.

  • Anyone using Database 11g with UCM?

    Anyone using Database 11g with UCM? Can't find anything on the customer reference site. Customer wants to be reassured that they are not the first, etc...
    Thx.
    ft

    I know of a few companies that are using 11g ;)
    They wont be the first.

  • How to select my custom monitor calibration profile into Lightroom 5.7?  I used i1 Display Pro to calibrate my monitor, I could not find or confirm that Lightroom is using my custom monitor calibration profile? Thank you very much.

    How to select my custom monitor calibration profile into Lightroom 5.7?  I used i1 Display Pro to calibrate my monitor, I could not find or confirm that Lightroom is using my custom monitor calibration profile? Thank you very much.

    The monitor profile is set at system level. Lightroom will find it there and use it. You're not supposed to do anything, i1 Profiler will do it all for you.
    Go here to confirm that the right profile is set as system default (Windows):

  • I need to connect a computer monitor to my MacBook Pro but have found that when using the mini display port to VGA adaptor the screen display on my macbook is very small font. Please what do I do to correct this?

    I need to connect a computer monitor to my mac book pro, using a mini display port to VGA adaptor. But have experienced a drastic reduction in font size on my
    Mac screen even before I have managed to check the result on the monitor screen. Please how do I compensate for this and restore my mac screen appearance?
    Many Thanks Alangium in uk

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • HT1338 I just bought a brand new mac mini, and finally got it authorized for itunes.  I purchased some tv programs and now it is telling me I canʻt play them because my monitor doesnʻt support HDCP... I am using a 30inch mac monitor...

    Any ideas how to get this working?  I donʻt have money to go buy a new monitor...

    Unfortunately HDCP is a technical requirement for the playback of some movie formats, for example Blu-ray.  If your monitor does offer this, make sure your cabling and connection type also supports it.  If your monitor doesn't offer this, I'm afraid you may have to consider buying a new or additional monitor.  Any other suggestions I could make are not permitted on this forum, I'm afraid.
    I have this problem too.  I have a 2005/2006 Apple Cinema Display that's still in perfect working order, but doesn't have support HDCP.  I had to find an alternative way of playing back my blu-rays.

  • Firefox will not maximize. Covers about 1/2 of my monitor and will not max, no matter what method I use. How do I correct this?

    My firefox screen is filling only about 1/2 my monitor screen. I cannot maximize it no matter what method I use (F11, manual click & drag on corner). I have rebooted; no change.
    == This happened ==
    Just once or twice
    == I opened Firefox this morning. Has never happened before.

    See:
    *http://www.imessengr.com/2006/12/how-to-remove-uninstall-sweetim.html
    * http://www.sweetim.com/help_simff.asp

  • MDS switch: DCNM: Is there a way to monitor the traffic on every port within a port channel using DCNM?

    I am trying to monitor the load on an 8 port ISL between 2 MDS FC switches, on DCNM. 
    Since it is a plain trunk link, I am able to monitor the stats of every ISL port individually. 
    My question is, since port channel shows up as a single interface on DCNM, is there  a way to monitor the per port utilization in that port channel?

    Thanks for the update! If anyone else has the same question, the answer is that in order to extract the bus log information in the TDMS file, you should use the DIAdem Bus Log Converter tool. It is expected (though confusing) that the file looks mostly empty in the Data Portal until you use this tool to extract the information.
    Also, this is a fantastic tutorial from a very bright engineer on how to correlate data from multiple sources, such as raw frame files, in DIAdem. Highly recommended reading. It also has some data on the bus log converter.
    Jarrod S.
    National Instruments

  • Hello I am getting some nasty popups on safari. looks like malware. virtually all menus on safari are frozen out. Search with firefox and followed some directions to use the activity monitor to force quit these processes and it was no use.

    malware on safari. tried activity monitor > force quit but they just popped back up. Please help.

    wow thanks holding down the shift key worked. Is there anything else I should do know?
    The problem wasn't in quitting safari but everyone time I opened it, that crap would pop up. Should I be able to use it now without holding down shift?

  • OEM 11g - Monitored SQL Executions, click SQL ID, shows blank screen??

    I am trying to investigate my execution plans against my DB; and was informed i can check current status of SQL scripts using:
    Performance tab > SQL Monitoring > Monitored SQL Executions
    I click on SQL ID i want to investigate and comes back with blank screen instead of the overview tab.
    See Oracle URL below for screenshot
    Figure 6-8 Monitored SQL Execution Details Page
    http://download.oracle.com/docs/cd/E11857_01/em.111/e11982/database_management.htm
    Kind Regards,
    Paul

    Please log an SR provide SQL Monitor Active Report for your SQL. Thanks.
    -Mughees

  • UCM IDC service call caching using SSXA

    Hi,
    I am calling a UCM idc service using SSXA's wcm:service tab. Using "__ssxaCacheEnabled" parameter i am able to cache the service call. But cache gets created for each user(private cache). As per our requirement the cache should be shared across the user(public cache).
    Can anybody please tell me how to achieve this.
    Thanks in advance.

    You should better ask this in the enteprise content management forum: WebCenter Content

Maybe you are looking for

  • Multilingual forms

    I need to create a form in Hindi language. How to achieve this? Please help

  • Disabling System Beep

    I'm trying to disable the beeping that my swing application is doing. I've searched the forum and I've found where you subclass the WToolkit and implement a do nothing on the beep method. I've also set the system property. However, it's still beeping

  • Adobe Flash keeps randomly crashing

    Help is needed badly. i'll go to sites i always go to and haven't had a problem with before, and then, just at random, while i'm doing things with the sites, my Adobe Flash will just randomly crash on me. i have no idea why, and it's really annoying

  • Z10 BB "LinK" fails to synchroniz​e

    Hi, Problem 1. My new Z10 (9 weeks old)  now fails to synch when I use BB Link software (4 weeks an issue). Link wont upload files, docs, pictures, etc. onto PC. "Close Message" comes up on PC, part way thro synch every time. It did work once.   Prob

  • Issue with date profile

    Dear All, I have one issue related to date profile which is like this,i have created a date profile and i have assigned this date profile to both Tansaction type & Item category of TA(standard order). But the assigned date profile(date rules) is not