Monitoring Web Dispatcher, SAP Content Server, apache with SM 7.1
Hello,
Did anyone of you come across monitoring possibilities of SAP WD, Content Server or an apache via SM 7.1 SP04? I want to integrate monitoring of these components to technical monitoring in new SM, but didn't find much about it so far.
Thank you very much for help.
Caro Mauro,
I'm more or less in the same situation right now.
Taking into account that you ask for help on this subject last 2004 Oct. I suppose that you have probably solved the problem.
Please can you help me with the solution implemented.
Find below my current work e-mail adress
[email protected]
Thanks in advance,
Best regards, Xavier Grau.
Similar Messages
-
Https access to Sap Content Server 620 with R/3 46C
We are trying to access the Sap Content Server 620 via Https.
We do not want to administer it via HTTPS, (as we know CSADMIN doesn't support Https in rel. 46C as for note 712332). We want to do in way that the users when do check-in/out of originals these go across the
network using Https instead Http.
According note 712330 it should be possible.
Anyone already did it ?
Any suggestions ?
NOte 506314 is not clear. We are in doubt how we applyed it.
What we did:
0)activate the SSL on the Sap COntent Server Web Site, requiring and installing a CA certificate.
1)On the R/3 server in tx OAC0 with %HTTPS filled up the
two boxes with "%HHTPS
required"
1)unpacked the Sap criptolibrary and copied all the files (including those in ntintel subdirectory created during the unpacking) under c:\Programmi\Sap\Frontend\Sapgui on a frontend PC.
2)set the env. variable SAPHTTP=c:\Programmi\Sap\Frontend\Sapgui on
Frontend PC
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the SAPSSLC.pse and the SAPSSLS.pse file with the command :
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the
SAPSSLC.pse and the SAPSSLS.pse file with the command :
sapgenpse get_pse -noreq -p C:\Programmi\SAP\FrontEnd\SAPgui\<PSE-NAME>
CN=localhost
4) we run the test: saphttp https://itmif069
from the frontend to the server where the Content Server is (itmif069). We recive the error:
trc file: "dev_http", trc level: 2, release: "620"
Fri Oct 08 12:26:46 2004
[2256] sccsid: @(#) $Id: //bas/620/src/krn/ftp/http.c#26 $ SAP
[2256] HTTP Start : argc - 2 a0 - saphttp
[2256] https//itmif069
[2256] SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
<<- SapSSLSetTraceFile()==SAP_O_K
=================================================
= SSL Initialization
SapISSLComposeFilename(ssl_lib): using default "sapcrypto.dll"
SapISSLComposeFilename(server_pse): using default "SAPSSLS.pse"
SapISSLComposeFilename(client_pse): using default "SAPSSLC.pse"
SapISSLComposeFilename(anon_pse): using default "SAPSSLA.pse"
= found SAPCRYPTOLIB 5.5.5C pl16 (Jun 10 2004) MT-safe
= found SECUDIR environment variable
= using SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
= secudessl_Create_SSL_CTX(): PSE "SAPSSLA.pse" not found,
= using PSE "SAPSSLC.pse" as fallback
= The Server SSL_CTX
= provides this ordered list of 9 ciphersuites:
= 1. SSL_RSA_WITH_RC4_128_SHA
= 2. SSL_RSA_WITH_RC4_128_MD5
= 3. SSL_RSA_WITH_3DES_EDE_CBC_SHA
= 4. SSL_RSA_WITH_DES_CBC_SHA
= 5. SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
= 6. SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
= 7. SSL_RSA_EXPORT_WITH_RC4_40_MD5
= 8. SSL_RSA_WITH_NULL_SHA
= 9. SSL_RSA_WITH_NULL_MD5
= Success -- SapCryptoLib SSL ready!
=================================================
<<- SapSSLInit(, read_profile=0)==SAP_O_K
ERROR => [2256] URI https//itmif069 [http.c 774]
ERROR => [2256] Connect to Host Port 443 error: NIECONN_REFUSED
[http.c 777]
We do not know if the criptolibrary ha to be instyalled to the R/3 server to.
We do not know if the CA certificate instalelled on the Sap COntent Server web site has to be installed on the R/3 server too.
Any suggestion ?
RegardsCaro Mauro,
I'm more or less in the same situation right now.
Taking into account that you ask for help on this subject last 2004 Oct. I suppose that you have probably solved the problem.
Please can you help me with the solution implemented.
Find below my current work e-mail adress
[email protected]
Thanks in advance,
Best regards, Xavier Grau. -
SAP Content Server error 405 Method Not Allowed
Hello Everyone
We have installed SAP Content server 04s with SAP DB 7.6 build on Solaris platform. We are trying to connect it through ECC. We have configured Apache web server on content server, and we are able to access it through http url.
On ECC we have defined repository OAC0 and when we click on CSADMIN to create repository its giving us u201C405 Method Not Allowedu201D allowed error. Even we tried to test this configuration with Report RSHTTP60 this is also giving us 405 errors.
We have tried lots of things to resolve this error but we didnu2019t get any fine solution, does any one come across to such kind of error while configuring Content server with R/3 or ECC?
We will appreciate any help asap,
Thanking you and waiting for reply,
Warm Regards
SharmishthaDear,
Can you please try following URL ?
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046&contRep=<Repository Name>
Regards
S S B -
SAP Content server installation using apache web server under HP-UX 11i
Hello,
I installed a SAP Content Server 6.4 in HP-UX 11.11 with MaxDB 7.6.
Although Installation is finished completely I got an syxtext error when apache web server is started after completing installation as below;
kbwpdc 106: /home/dmscs/bin>./apachectl start
Syntax error on line 233 of /home/dmscs/conf/httpd.conf:
Cannot load /home/dmscs/modules/mod_sapcs2.so into server: Invalid
argument
I think apache web server doesn't know mod_sapcs2.so although it exists in the directory(/home/dmscs/module).
- Working sequence
1) Environment variables setup to compile with 64bit.
2) "configure" generation with option relevant to SAP content server
3) "make" generation
4) "make install" generation
5) Install SAP Content server 6.40
6) Install MaxDB 7.6
7) Edit httpd.conf for loading mod_sapcs2.so module and changing Listen port.
8) Start apache web server.
Do I need to configure to solve this syntext error? missing any step?
Please let me know to solution if you had experienced with the same problem.
I will wait for your response.
Thanks,
Mark Yoo.Hi Mark,
Can i check with you how do you set your environment to compile in 64bit ? My file mod_sapcs.o apear in the libexec directory instead of mod_sapcs.so. That why my apache cannot start. It prompted Cannot load module /home/sapcs/libexec/mod_sapc.o
Regards
Kim -
How to install Apache Web server on my SAP Content Server
Dear Experts,
I am in the process of installaing Content Server in my landscape, i am working on Suse Linux 10 SP2 and planning to install ContentServer 6.30.
I have read the standard SAP installation document for the same and it says that we need to install Apache Web server version 1.3.XX, so i have downloaded the file apache_1.3.27-x86_64-whatever-linux22.tar.
Now i want to know the following before i take any actions on my further installation of the Content Server
What is the difference between Apache and httpd servers (services) are they different or same
Is the file apache_1.3.27-x86_64-whatever-linux22.tar correct to install Web Server on my Linux system
Do i have to download any other httpd files
How to install and start the Web server on my Linux
Waiting for some information
Thanks and regards
BasoKingYou can install a higher apache also (2.2.x), I'd not use the old versions. I'd also not use a "somwhere" compiled apache, you don't now if that version is clean.
I'd rather compile an own one, it's not that difficult:
Note 664384 - Generation info for Apache Web server for SAP Content Server
The result will be a default webserver (httpd) without any unnecessary modules compiled in.
Markus -
Error while starting Apache WebServer in SAP Content server from sapcs user
Dear Consultants,
We are facing a Issue while staring Apache Server from SAPCS user
We have installed SAP Content server 6.4 with SAP MAX DB 7.6 on RHEL
Linux 64 bit OS, we also installed Apache web server server following SAP
Standard Installation guide,
When We run Apache server using sapcs user we are facing a error
Error (1) -
[sapcs@hpsebdev1 bin]$ apachectl start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Error (2) - same issue we get when we use httpd script to start apache
service.
[sapcs@hpsebdev1 bin]$ httpd -k start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Please Help regarding the issue
Regards
Gagan Sharma
SAP BASIS ConsultantHello Gaghan,
From the error it seems that port 80 is being already used. Did you install the second Apache under a different user?
Can you please try using another port?
Regards,
Blanca -
Apache start error on SAP Content server 6.40
Hi all
I installed a SAP Content Server 6.4 successfully in Solaris 10 with MaxDB 7.6.
Although Installation is finished completely I got an syxtext error when apache web server is started after completing installation as below;
dmscs/bin>./apachectl start
Cannot load /usr/sap/XXD/apache/libexec/mod_sapcs.so into server: ld.so.1: httpd: fatal:sap/Apache/libexec/mod_sapcs.so: wrong ELF class: ELFCLASS64
./apachectl start: httpd could not be started
let me know to solution if you had experienced with the same problem.Hi Nelis,
We did the module registration after after installation, Please find the below of httpd.conf.
=======================================================================================
Example:
LoadModule foo_module libexec/mod_foo.so
LoadModule sapcs_module libexec/mod_sapcs.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module libexec/mod_env.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module libexec/mod_status.so
LoadModule info_module libexec/mod_info.so
LoadModule includes_module libexec/mod_include.so
LoadModule autoindex_module libexec/mod_autoindex.so
LoadModule dir_module libexec/mod_dir.so
LoadModule cgi_module libexec/mod_cgi.so
LoadModule asis_module libexec/mod_asis.so
LoadModule imap_module libexec/mod_imap.so
LoadModule action_module libexec/mod_actions.so
LoadModule speling_module libexec/mod_speling.so
LoadModule userdir_module libexec/mod_userdir.so
LoadModule alias_module libexec/mod_alias.so
LoadModule rewrite_module libexec/mod_rewrite.so
LoadModule access_module libexec/mod_access.so
LoadModule auth_module libexec/mod_auth.so
LoadModule anon_auth_module libexec/mod_auth_anon.so
LoadModule dbm_auth_module libexec/mod_auth_dbm.so
LoadModule digest_module libexec/mod_digest.so
LoadModule proxy_module libexec/libproxy.so
LoadModule cern_meta_module libexec/mod_cern_meta.so
LoadModule expires_module libexec/mod_expires.so
LoadModule headers_module libexec/mod_headers.so
LoadModule usertrack_module libexec/mod_usertrack.so
LoadModule log_forensic_module libexec/mod_log_forensic.so
LoadModule unique_id_module libexec/mod_unique_id.so
LoadModule setenvif_module libexec/mod_setenvif.so
Reconstruction of the complete module list from all available modules
(static and shared ones) to achieve correct module execution order.
[WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
AddModule mod_sapcs.cpp
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_digest.c
AddModule mod_proxy.c
AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
AddModule mod_log_forensic.c
AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
Can you guide me where exactly point to the correct location for /ContentServer/ContentServer.dll in httpd.conf.
=========================================================================
#<VirtualHost *:80>
DocumentRoot /www/docs/dummy-host.example.com
ServerName dummy-host.example.com
ErrorLog logs/dummy-host.example.com-error_log
CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
<IfModule mod_sapcs.cpp>
AddModuleInfo ContentServer "SAP Content Server 640/0 (Prototype) (C) SAP AG 1998, 2001"
CSConfigPath /export/home/sapcs1/conf/cs.conf
<Location /sapcs>
SetHandler sapcs_module
Allow from all
</Location>
<Location /ContentServer/ContentServer.dll>
SetHandler sapcs_module
Allow from all
</Location>
<Location /contentserver/contentserver.dll>
SetHandler sapcs_module
Allow from all
</Location>
Regards,
Panu
Edited by: kumar panu on Sep 7, 2010 9:05 AM
Edited by: kumar panu on Sep 7, 2010 9:07 AM
Edited by: kumar panu on Sep 7, 2010 9:08 AM
Edited by: kumar panu on Sep 7, 2010 9:08 AM -
Webi Hyperlink to SAP Content Server
Hi folks,
My customer is trying to use a hyperlink;
http://opentext.samca.net:8080/archive?get&pVersion=0045&contRep=D1&docId=4945274BD42AD25FE10000000AC819E6
in his Webi report to launch a document stored on his SAP Content Server.
However the url will not parse in Webi because the u2018HTTP ver 4.5 for Content Serveru2019 expects a method as a first parameter, whilst in standard HTTP protocol the option of passing a parameter is not covered.
Is there any way around this, the url above has to be specified this way to comply with the SAP Content Server?
Kind regards,
JohnJohn,
In WebI:
Drag and Drop: Free-standing cell, Blank cell, in that paste the URL. And change cell properties of "Read Cell content as" -- Hyperlink.
Thank You!! -
Creating documents with SCMS_DOC_URL_CREATE in SAP Content Server
Hi there,
I have a Problem here with the Knowledge Provider concerning SCMS_DOC_URL_CREATE and hope anyone could help me out.
For a SAP Records Management document I am calling BAPI_SRM_DOC_CREATE and get a LOIO and a PHIO ID for my new document. The PHIO-ID I pass to SCMS_DOC_URL_CREATE which then creates the URL to put the file on a SAP Content Server with a 3rd party tool. That works totally fine and I can see the file on the Content Server with its metadata,
Unfortunately SAP Records Management doesn't recognize that a file has been uploaded. When I open the file in the transaction ORGANIZER it has no content and no components.
Is there any function call I am missing to tell the Records Management document that I have uploaded something?
All is working fine when I get the uploaded content into NetWeaver with SCMS_GET... and call BAPI_SRM_CHECKIN_DOCUMENT. But of course this is not what I want (transferring the file directly in the local network area where the content server stands, then getting it back to NetWeaver and back again to the content server).
Any help would really be appreciated.
Thank you
MarcusAnswer: because SCMS_DOC_URL_CREATE is not remote enabled by default.
-
Integrate DMS / SAP Content Server 6.40 with EP
Hello ,
With reference to [DMS Installation |DMS Installation; integrate DMS / SAP Content Server 6.40 with EP to access EP PCD .
Regards ,
SantoshYou can integrate the portal with DMS/CMS by using the DMS connector or DMS repository manager. The DMS repository manager can be dowloaded from sap service marketplace
See threads for more information
DMS Integration in EP
Content Server 6.3 integrate with Portal 6.0 possible?
Points are welcome if it is useful
Koti Reddy -
Hello colleagues,
I have this error when start the Content Server,
host:(/directory/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /directory/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into
server: /directory/apache/modules/mod_sapcs22.so: undefined symbol: ap_log_error
Can you help me?
ThanksHi Reagan,
Execute the first parameter,
rgqaserp:(/sapcontreps/apache/modules)(root)#cat /sapcontreps/apache/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/sapcontreps/apache"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:logs
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 1090
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule sapcs_module modules/mod_sapcs22.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
#LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule info_module modules/mod_info.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/sapcontreps/apache/htdocs"
<Directory "/sapcontreps/apache/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "logs/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/sapcontreps/apache/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/sapcontreps/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/sapcontreps/apache/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
<IfModule mod_sapcs.cpp>
AddModuleInfo ContentServer "SAP Content Server 640/0 (Prototype) (C) SAP AG 1998, 2001"
CSConfigPath /sapcontreps/conf/cs.conf
<Location /sapcs>
SetHandler sapcs_module
Allow from all
</Location>
<Location /ContentServer/ContentServer.dll>
SetHandler sapcs_module
Allow from all
</Location>
<Location /contentserver/contentserver.dll>
SetHandler sapcs_module
Allow from all
</Location>
</IfModule>
Second parameter,
rgdeverp:(/sapcontreps/apache/modules)(root)#ls -la /sapcontreps/apache/modules
total 5544
drwxrwxrwx 2 sapcs sapsys 4096 Jun 12 15:46 .
drwxrwxrwx 15 sapcs sapsys 4096 Jun 12 14:56 ..
-rwxrwxrwx 1 sapcs sapsys 13836 Jun 12 14:54 httpd.exp
lrwxrwxrwx 1 sapcs sapsys 34 Jun 12 15:46 libsapsecu.so -> /sapcontreps/modules/libsapsecu.so
-rwxrwxrwx 1 sapcs sapsys 34756 Jun 12 14:56 mod_access_compat.so
-rwxrwxrwx 1 sapcs sapsys 31861 Jun 12 14:56 mod_actions.so
-rwxrwxrwx 1 sapcs sapsys 44418 Jun 12 14:56 mod_alias.so
-rwxrwxrwx 1 sapcs sapsys 30426 Jun 12 14:56 mod_allowmethods.so
-rwxrwxrwx 1 sapcs sapsys 41605 Jun 12 14:56 mod_auth_basic.so
-rwxrwxrwx 1 sapcs sapsys 84126 Jun 12 14:56 mod_auth_digest.so
-rwxrwxrwx 1 sapcs sapsys 68399 Jun 12 14:56 mod_auth_form.so
-rwxrwxrwx 1 sapcs sapsys 30531 Jun 12 14:56 mod_authn_anon.so
-rwxrwxrwx 1 sapcs sapsys 36079 Jun 12 14:56 mod_authn_core.so
-rwxrwxrwx 1 sapcs sapsys 40100 Jun 12 14:56 mod_authn_dbd.so
-rwxrwxrwx 1 sapcs sapsys 32532 Jun 12 14:56 mod_authn_dbm.so
-rwxrwxrwx 1 sapcs sapsys 32359 Jun 12 14:56 mod_authn_file.so
-rwxrwxrwx 1 sapcs sapsys 49757 Jun 12 14:56 mod_authn_socache.so
-rwxrwxrwx 1 sapcs sapsys 61854 Jun 12 14:56 mod_authz_core.so
-rwxrwxrwx 1 sapcs sapsys 42581 Jun 12 14:56 mod_authz_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35071 Jun 12 14:56 mod_authz_dbm.so
-rwxrwxrwx 1 sapcs sapsys 34704 Jun 12 14:56 mod_authz_groupfile.so
-rwxrwxrwx 1 sapcs sapsys 35256 Jun 12 14:56 mod_authz_host.so
-rwxrwxrwx 1 sapcs sapsys 30435 Jun 12 14:56 mod_authz_owner.so
-rwxrwxrwx 1 sapcs sapsys 30802 Jun 12 14:56 mod_authz_user.so
-rwxrwxrwx 1 sapcs sapsys 105072 Jun 12 14:56 mod_autoindex.so
-rwxrwxrwx 1 sapcs sapsys 34253 Jun 12 14:56 mod_buffer.so
-rwxrwxrwx 1 sapcs sapsys 192292 Jun 12 14:56 mod_cache.so
-rwxrwxrwx 1 sapcs sapsys 84567 Jun 12 14:56 mod_cache_disk.so
-rwxrwxrwx 1 sapcs sapsys 88616 Jun 12 14:56 mod_cache_socache.so
-rwxrwxrwx 1 sapcs sapsys 98717 Jun 12 14:56 mod_cgid.so
-rwxrwxrwx 1 sapcs sapsys 354271 Jun 12 14:56 mod_dav.so
-rwxrwxrwx 1 sapcs sapsys 189761 Jun 12 14:56 mod_dav_fs.so
-rwxrwxrwx 1 sapcs sapsys 59275 Jun 12 14:56 mod_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35504 Jun 12 14:56 mod_dir.so
-rwxrwxrwx 1 sapcs sapsys 33559 Jun 12 14:56 mod_dumpio.so
-rwxrwxrwx 1 sapcs sapsys 31544 Jun 12 14:56 mod_env.so
-rwxrwxrwx 1 sapcs sapsys 40037 Jun 12 14:56 mod_expires.so
-rwxrwxrwx 1 sapcs sapsys 63988 Jun 12 14:56 mod_ext_filter.so
-rwxrwxrwx 1 sapcs sapsys 39211 Jun 12 14:56 mod_file_cache.so
-rwxrwxrwx 1 sapcs sapsys 52811 Jun 12 14:56 mod_filter.so
-rwxrwxrwx 1 sapcs sapsys 60936 Jun 12 14:56 mod_headers.so
-rwxrwxrwx 1 sapcs sapsys 158790 Jun 12 14:56 mod_include.so
-rwxrwxrwx 1 sapcs sapsys 66838 Jun 12 14:56 mod_info.so
-rwxrwxrwx 1 sapcs sapsys 36196 Jun 12 14:56 mod_lbmethod_bybusyness.so
-rwxrwxrwx 1 sapcs sapsys 36188 Jun 12 14:56 mod_lbmethod_byrequests.so
-rwxrwxrwx 1 sapcs sapsys 36192 Jun 12 14:56 mod_lbmethod_bytraffic.so
-rwxrwxrwx 1 sapcs sapsys 48496 Jun 12 14:56 mod_lbmethod_heartbeat.so
-rwxrwxrwx 1 sapcs sapsys 86665 Jun 12 14:56 mod_log_config.so
-rwxrwxrwx 1 sapcs sapsys 40163 Jun 12 14:56 mod_log_debug.so
-rwxrwxrwx 1 sapcs sapsys 31797 Jun 12 14:56 mod_logio.so
-rwxrwxrwx 1 sapcs sapsys 48254 Jun 12 14:56 mod_macro.so
-rwxrwxrwx 1 sapcs sapsys 54195 Jun 12 14:56 mod_mime.so
-rwxrwxrwx 1 sapcs sapsys 106526 Jun 12 14:56 mod_negotiation.so
-rwxrwxrwx 1 sapcs sapsys 291551 Jun 12 14:56 mod_proxy.so
-rwxrwxrwx 1 sapcs sapsys 171766 Jun 12 14:56 mod_proxy_ajp.so
-rwxrwxrwx 1 sapcs sapsys 108144 Jun 12 14:56 mod_proxy_balancer.so
-rwxrwxrwx 1 sapcs sapsys 54249 Jun 12 14:56 mod_proxy_connect.so
-rwxrwxrwx 1 sapcs sapsys 38536 Jun 12 14:56 mod_proxy_express.so
-rwxrwxrwx 1 sapcs sapsys 61607 Jun 12 14:56 mod_proxy_fcgi.so
-rwxrwxrwx 1 sapcs sapsys 112538 Jun 12 14:56 mod_proxy_ftp.so
-rwxrwxrwx 1 sapcs sapsys 114424 Jun 12 14:56 mod_proxy_http.so
-rwxrwxrwx 1 sapcs sapsys 56400 Jun 12 14:56 mod_proxy_scgi.so
-rwxrwxrwx 1 sapcs sapsys 55514 Jun 12 14:56 mod_proxy_wstunnel.so
-rwxrwxrwx 1 sapcs sapsys 32760 Jun 12 14:56 mod_ratelimit.so
-rwxrwxrwx 1 sapcs sapsys 40376 Jun 12 14:56 mod_remoteip.so
-rwxrwxrwx 1 sapcs sapsys 45091 Jun 12 14:56 mod_reqtimeout.so
-rwxrwxrwx 1 sapcs sapsys 37224 Jun 12 14:56 mod_request.so
-rwxrwxrwx 1 sapcs sapsys 171049 Jun 12 14:56 mod_rewrite.so
lrwxrwxrwx 1 sapcs sapsys 35 Jun 12 15:46 mod_sapcs22.so -> /sapcontreps/modules/mod_sapcs22.so
-rwxrwxrwx 1 sapcs sapsys 119242 Jun 12 14:56 mod_sed.so
-rwxrwxrwx 1 sapcs sapsys 57944 Jun 12 14:56 mod_session.so
-rwxrwxrwx 1 sapcs sapsys 32806 Jun 12 14:56 mod_session_cookie.so
-rwxrwxrwx 1 sapcs sapsys 47023 Jun 12 14:56 mod_session_dbd.so
-rwxrwxrwx 1 sapcs sapsys 44102 Jun 12 14:56 mod_setenvif.so
-rwxrwxrwx 1 sapcs sapsys 53976 Jun 12 14:56 mod_slotmem_shm.so
-rwxrwxrwx 1 sapcs sapsys 45214 Jun 12 14:56 mod_socache_dbm.so
-rwxrwxrwx 1 sapcs sapsys 35686 Jun 12 14:56 mod_socache_memcache.so
-rwxrwxrwx 1 sapcs sapsys 68519 Jun 12 14:56 mod_socache_shmcb.so
-rwxrwxrwx 1 sapcs sapsys 39669 Jun 12 14:56 mod_speling.so
-rwxrwxrwx 1 sapcs sapsys 63924 Jun 12 14:56 mod_status.so
-rwxrwxrwx 1 sapcs sapsys 43320 Jun 12 14:56 mod_substitute.so
-rwxrwxrwx 1 sapcs sapsys 33237 Jun 12 14:56 mod_unique_id.so
-rwxrwxrwx 1 sapcs sapsys 33466 Jun 12 14:56 mod_unixd.so
-rwxrwxrwx 1 sapcs sapsys 33615 Jun 12 14:56 mod_userdir.so
-rwxrwxrwx 1 sapcs sapsys 25961 Jun 12 14:56 mod_version.so
-rwxrwxrwx 1 sapcs sapsys 37707 Jun 12 14:56 mod_vhost_alias.so
But when stop or stat I have the error,
rgqaserp:(/sapcontreps/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /sapcontreps/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into server: /sapcontreps/apache/modules/mod_sapcs22.so: ELF file data encoding not little-endian
Can you help me?
Thanks -
SAP Content Server Configuration (CSADMIN) error in connection
Dear Colleagues
I have installed SAP Content Server 6.40 on Windows 2008 R2 server (64 bit) using IIS 7.5 with MaxDB 7.8.02, Installation completed successfully.
URL testing Information on both Content Server and an Instance which we need to connect to it.
http://cs460:1090/ContentServer/ContentServer.dll?serverInfo
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001 ";serverVersion="6400";serverPatch="9";serverBuild="201";pVersion="0046";serverStatus=
"running";serverStatusDescription="";serverDate="2014-05-11";serverTime="02:03:08";startUpDate="2014-05-11";startUpTime="02:03:08";lastAccessDate="2014-05-11";lastAccessTime="02:03:08";
However, when I try to create repository with CSADMIN tcode, I am getting error ''HTTP error: 500 (Internal Server Error)'.
database host is up or down and the web server up
My settings are as follows
1- On Content server I give full permission to content Rep directory
2- On IIS I have allowed Unspecified ISAPI& CGI & modules.
3-odbcreg as the following:-
C:\sapdb\SDB\db\pgm>odbcreg -g
List of installed drivers
1. SQL Server; %WINDIR%\system32\SQLSRV32.dll
2. SAP MaxDB SDB (Unicode); C:\sapdb\SDB\db\pgm\sdbodbcw.dll
3. SAP MaxDB SDB; C:\sapdb\SDB\db\pgm\sdbodbc.dll
C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbcw.dll
ODBC Driver for 'MaxDB' has been successfully registered.
C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbc.dll
ODBC Driver for 'MaxDB' has been successfully registered.
4- under settings tab for the repository I set the parameter (driver = MaxDB) as per SAP note 977091
Please suggest, how to resolve this issue.
ThanksHI Hany Zahran,
Hope that your issue resolved? if so please close this thread with updated answer and make sure mark assumed answered (see top of the screen).
All the best my dear fnd.
Regards,
chandu. -
Checkout and editing of original files to a DIR stored in SAP content server
Hi,
is it possible with SAP Web Documents to checkout and edit original files from a document info record that are stored in a SAP Content Server and save the changes back to the SAP Content Server?
Kind regards
Florian WiedemannHi,
unfortunately it's not that easy. Mobile Documents provides with NW ABAP 7.40 SP10 an API which, if you implement it, allows you to expose data from basically any ABAP system. Currently the API only provides read support, but we are already working on enabling write and versioning support also.
If you are interested there is an Expert Session next week on Wednesday the 17th which explains how to get your Data to SAP Mobile Documents.
Here are the details: SAP Mobile Documents - Webinars
Best regards
Alex -
Sap content server - error sending certificate - HTTPIO_PLG_NO_MPI_INIT
Hello all,
we have installed the SAP content server and created a new repository which has the status running.
Now when we go to OAC0 and the send certificate button, we get an error message:
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 HTTPIO_PLG_NO_MPI_INIT
Message no. CMS166
Why can I not send the certificate?
Thanks
AnneWhat i mean is you need a user that has both local machine administration rights and local domain administration rights. This is due to the fact that it installs some web components that require domain admin. If you don't install with this, its likely you will be able to test connection fine but receive errors when trying to send the certificate. This issue cannot be resolved after the installation. i.e. if you install with the incorrect admin rights and then adjust these afterwards, it will still not work, and the only solution is to reinstall with the correct rights.
-
Dear Experts,
I got problem in installing SAP Content Server 6.30 in Solaris 9 (Unix-SPARC 64bit). After discus with OSS they sugest to review the Apache installation, i try to follow the OSS note number 664384, but i confused with some error about the compilation, here is my compilation step :
1. We install gcc for solaris 9 from www.sunfreeware.com
2. In PATH we add PATH=/usr/bin:/opt/sfw/gcc-3/bin
3. run configure --prefix=/home/sapcs --enable-module=most --enable-shared=max
i got error :
============================================================
./helpers/TestCompile: make: not found
++ doing sanity check on compiler and options+
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
./helpers/TestCompile: make: not found
============= End of Error Report =============
4. Then we add PATH=/usr/bin:/usr/ccs/bin:/opt/sfw/gcc-3/bin and CFLAGS="-xarch=v9" (note 664384)
================================================
re run ./configure --prefix=/home/sapcs/ --enable-module=most --enable-shared=max
Configuring for Apache, Version 1.3.41
++ using installation path layout: Apache (config.layout)+
Creating Makefile
Creating Configuration.apaci in src
++ enabling mod_so for DSO support+
Creating Makefile in src
++ configured for Solaris 290 platform+
++ setting C compiler to gcc+
++ setting C pre-processor to gcc -E+
++ using "tr [a-z] [A-Z]" to uppercase+
++ checking for system header files+
++ adding selected modules+
o rewrite_module uses ConfigStart/End
disabling DBM support for mod_rewrite
(perhaps you need to add -ldbm, -lndbm or -lgdbm to EXTRA_LIBS)
o dbm_auth_module uses ConfigStart/End
++ using builtin Expat+
++ checking sizeof various data types+
++ doing sanity check on compiler and options+
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
cd ..; gcc -DSOLARIS2=290 -DNO_DBM_REWRITEMAP -DUSE_EXPAT -I./lib/expat-lite -xarch=v9 `./apaci` -o helpers/dummy helpers/dummy.c -lsocket -lnsl -lpthread
gcc: language arch=v9 not recognized
ld: fatal: file helpers/dummy.c: unknown file type
ld: fatal: File processing errors. No output written to helpers/dummy
collect2: ld returned 1 exit status
*** Error code 1
make: Fatal error: Command failed for target `dummy'
============= End of Error Report =============
Aborting!
5. I tried to remove the env variable CFLAGS="-xarch=v9", and the result it successfuly installed then i tried to install SAP Content Server 6.30, the installation had been done suceesfully but when i tried to start apache, it can not load the mod_sapcs.so
Syntax error on line 205 of /home_sapcs/conf/httpd.conf:
Cannot load /home_sapcs/libexec/mod_sapcs.so into server: ld.so.1: httpd: fatal: /home_sapcs/libexec/mod_sapcs.so: wrong ELF class: ELFCLASS64
apachectl start: httpd could not be started
Do you have any idea with this problem? I really need advice for this.
Thanks in advance
BagusHello Experts,
Please provide the solution, how the problem was resolved. Even I am getting following error right after installation of Content server when installation prompts to restart the server, when I try to stop apache on Solaris 10, it throws following error:
Syntax error on line 233 of /usr/local/apache2/conf/httpd.conf:
Cannot load /usr/local/apache2/modules/mod_sapcs2.so into server: ld.so.1: httpd: fatal: /usr/local/apache2/modules/mod_sapcs2.so: wrong ELF class: ELFCLASS64
I am facing this issue since very long now.
Please reply at earliest.
Thanks.
Regards,
Kashyap Shah
Maybe you are looking for
-
Adding users to roles in the new preview portal (new RBAC feature) does not work
When I click the Invite Users/Add button for any of the 3 roles in the new preview portal, the page doesn't load and instead, it instantly redirects to an HTTP 520 error page. Can anyone please look into this and fix it? It's been this way since last
-
I need to get a new hard drive for the g56..
the one thats in it has a error code 301 and i cant boot it. This is only 16 months old and its only been used about 10 times.
-
In the event of anything untoward happening when I install SL is it not just possible to put in the original Leopard Disc? Do I have to back up my system? I could back up any of my documents and put these on a memory disc. Its just that it seems such
-
Photoshop Elements 9 for Win & Mac
Hi, Thinking of buying Elements 9 which is advertised for "Windows or Mac" . Is it correct that a) I can install it on *either* my Macbook or XP computer?. Could I possibly (b) install on both ? ( at home) , if I don't then use the prog. simul
-
Is it possible to use roles defined for a particular site in another site without recreating them? We have a large organization with multiple sites (to avoid confusion with workflow), and we often use the same role settings when defining custom roles