Monitoring with Grid Control : Default thresholds
Hi,
I have installed Grid Control 10GR2, and have been struggling with the monitoring the health of Enterprise databases. Previously, any critical health problem seemed to have been reported promptly..
The default time interval in Grid Control is too long for certain health issues.. like
database up-down, tablespace full...
I just wanted to get idea from others, what have they done with the time intervals?
Any suggestions/experiences??
- Jayant
I've kept the defaults on most things, I have changed a few things, notably a metric on the agent itself. But all databases self manage their space anyway. tablespace full you can just change to 5 minutes or something if you are concerned about it.Just experiment, everybodys requirements are different.
And for the other chap to change a time interval on grid control 10.2:
Go to Targets-->All Targets
Click on the name of the target you want to change (be it host/database or agent etc)
Scroll down the page and click on 'Metric and Policy Settings'
There you will see the collection schedule for each metric, this a clickable link from where you can then edit.
Alternatively use a monitoring template and do it that way, especially if you got lots to change.
Bazza
Similar Messages
-
What are the prerequisites to monitor SAP ENVIROMENT with grid control
anybody know what are the prerequisites to monitor SAP ENVIROMENT with grid control
its necessary another software
thanksThere's currently no way to monitor a whole SAP system through gridcontrol. Of course you can monitor the underlying database.
Werner -
How to monitor Oracle Glassfish with Grid Control 11g
Hi,
Could someone tell me how can i monitor Oracle Glassfish with Grid Control 11g ?? i think i need a plug-in but i don't know where could i download it
I guess the information i can monitor depends on the plug-in :)
Regards
CarlosHi Carlos,
We do have partners that routinely write plug-ins to extend OEM. If you take a look at the EM Extensibility Exchange below, you will find various extensions that partners such as Blue Medora have written:
http://apex.oracle.com/pls/apex/f?p=34841:1:26399399216901:::::
Please keep in mind though that between SLM and JVM diagnostics, you would have a significant amount of visibility even without the Glassfish target.
Cheers,
Glen -
Dataguard creation with Grid Control
hi all
i'm trying to create a physical standby database with grid control. (asm to asm)
after setting various properties in the wizard, grid goes on creating a broker config and when it gets to the step "preparing standby database creation" it fails with "ERROR: invalid username and/or password."
no more info on where it fails.
preciate if anyone has any tips on what to check.Hi jstem,
thank you for your help
The initial status of the DATAGUARD is SUCCESS, and all is working fine with the BROKER.
The"Availability"=>"Dataguard Administration" page is correct, all the indications are right, except :
- Estimate Failover Time : Not available
Here is the output of 'Verify Data Guard Setup'
Initializing
Connected to instance srv-bdd02:PHOENIX
Starting alert log monitor...
Updating Data Guard link on database homepage...
Skipping verification of fast-start failover static services check.
Data Protection Settings:
Protection mode : Maximum Availability
Redo Transport Mode settings:
PHNXFIN: SYNC
PHNXENT: SYNC
Checking standby redo log files.....OK
Checking Data Guard status
PHNXFIN : Normal
PHNXENT : Normal
Checking inconsistent properties
Checking agent status
WARNING: No credentials available for target. srv-bdd01
Attempting agent ping ... OK
WARNING: No credentials available for target. srv-bdd02
Attempting agent ping ... OK
Checking applied log on PHNXENT...OK
Processing completed.
Yes, i've already investigated about credentials ...
ALL the credentials are OK for hosts, instance, agent, .... don't know where to add more credentials .... -
PeopleSoft 8.52 Plug-in Implementation Guide for use with Grid Control
Per the Readme accompanying the download of PeopleSoft 8.52 Plug-in for use with Grid Control (11.1.0.1)-- "For the implementation reference guide, refer to "PeopleSoft Enterprise Environment Management Plug-in 8.52 for Oracle Enterprise Manager Implementation Guide" which you can download from Oracle Technology Network."
I don't seem able to find it.
Can anyone point me in the right direction?
TIA
JeriDuh, I was looking on the wrong site.
-
Can Oracle Application Diagnostics for Java used with Grid Control 10.2.0.3
I have installed Grid Control 10.2.0.3 in Solaris 10.
I was asked to install AD4J . Is it necessary to upgrade Grid Control to 10.2.0.4 for installing AD4J or can I use the present 10.2.0.3 version withour upgrading it ?Hello.
We already have Grid Control 10.2.0.4 and just installed AD4J 10.2.0.4. This version of AD4J is not integrated with Grid Control, and can be setup on any server by unzipping the downloaded file (no installer). I did find the installation/configuration documentation lacking, but worked through it with a little help from Oracle Support.
The AD4J console has the look and feel of Grid Control, but is totally separate app with its own Apache server, etc.
Daren -
Batch remove all default policys on all targets monitored by Grid Control.
Hi all,
I have been searching for a way on how to remove all default policy's that are attached to the target after they have been added into the Grid Control.
I have been trying with monitoring templates, but without any luck. Yes it changes values but it does not remove non template listed policy's.
There must be a way to do this, without manually do it on all 400+ targets.
All ideas of interest.
Best regz,
/RobbanNice it worked just fine.
Thanks for the input.
Dont know why I didn't think of disabling the policy's, but i guess that i goy snowed in on the removal part.
Also ran into a new problem. (Unable to apply a monitoring template to a group with more then 100 targets)
Found the solution on metalink: Note:455279.1
Its a bug and there is a OneOff for it: "Patch 5573244"
After applying that patch it worked fine.
Best regz,
/Robban -
Manualy onfigure database with grid control
Hi All,
I am using EM grid control 10g r4 to monitor many of the 9i and 10g databases in the environment.
Need help in this scenario.
On a db server (10.2.0.2) I have grid control agent (10.2.0.4) installed and able to monitor databases on it.
Recently my colleague created a new database with ’local EM database control’ instead of using centralized grid control. In this case how can I manually configure this new database to point to EM grid control.
Please let me know
~ThanksYou can attempt a rediscovery from within Grid Control.
On the server where you want to discover the target database set the ORACLE_HOME to the agent home and then execute:
agentca -d
This should rediscover and find your database. -
How to use stored script from with Grid Control 10gR2
HI
My backup method uses a stored script in the recovery catalog that is separated from Grid Control's repository database.
In Scheduled Backup, there is no way to connect to recovery catalog; let alone use stored script. Is that true?
Thanks,
Kevinit works, here is a test case , I use this functionality a lot
$connected from HOST
rman target / catalog <mycatalog>
connected to target database: TOPAZ (DBID=3348250252)
connected to recovery catalog database
RMAN> create script testbackup
2> {backup current controlfile;
3> }
created script testbackup
RMAN> run {execute script testbackup;}
executing script: testbackup
Starting backup at 12-JUN-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=217 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=251 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=200 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=337 devtype=DISK
allocated channel: ORA_DISK_5
channel ORA_DISK_5: sid=182 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
channel ORA_DISK_1: starting piece 1 at 12-JUN-07
channel ORA_DISK_1: finished piece 1 at 12-JUN-07
piece handle=/rman_backup/d_TOPAZ_s_12344_p_1_t_625077001 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
Finished backup at 12-JUN-07
Starting Control File and SPFILE Autobackup at 12-JUN-07
piece handle=/rman_backup/c-3348250252-20070612-06 comment=NONE
Finished Control File and SPFILE Autobackup at 12-JUN-07
NOW in grid control I have configured my Recovery catalog settings, check for OS username , that should be owner of oracle home for recover catalog
I schedule a RMAN backup job with these parameters in script
{execute script testbackup;}
Status Running
Step ID 203585
Targets topaz.ucas.ac.uk
Started 12-Jun-2007 16:34:56 (UTC+01:00)
Step Elapsed Time 1 minutes, 37 seconds
Management Service stardb1:4889_Management_Service
TIP Management Service from which the job step was dispatched.
Output Log
Recovery Manager: Release 9.2.0.6.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
connected to target database: TOPAZ (DBID=3348250252)
RMAN>
connected to recovery catalog database
RMAN>
echo set on
RMAN> {execute script testbackup;}
2> exit;
executing script: testbackup
Starting backup at 12-JUN-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=164 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=134 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=22 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=198 devtype=DISK
allocated channel: ORA_DISK_5
channel ORA_DISK_5: sid=145 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
channel ORA_DISK_1: starting piece 1 at 12-JUN-07
channel ORA_DISK_1: finished piece 1 at 12-JUN-07
piece handle=/rman_backup/d_TOPAZ_s_12346_p_1_t_625077300 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 12-JUN-07
Starting Control File and SPFILE Autobackup at 12-JUN-07
piece handle=/rman_backup/c-3348250252-20070612-07 comment=NONE
Finished Control File and SPFILE Autobackup at 12-JUN-07
null -
Backing up database and archivelogs with grid control.
So I was scheduling a job to backup the entire database and archive logs to an ASM diskgroup. Well for some reason.... the backup of both the datafiles and archivelog files keep going to my $ORACLE_HOME/db/dbs directory. I have no clue as I've dropped the job and recreated it and made sure it was going to <diskgroup>. Anyone have any idea what might be happening? I'm using 10.2.0.4 for the database and ASM. My Grid control is also 10.2.0.4.
Thanks in advance
LukeGrid Control:
Disk Backup Location: I've tried to leave it blank so that it will goto my flash recovery area(Which is on ASM) and I even tried to explicitly state an ASM diskgroup, but both of those fail and start backing up to /dbs directory
RMAN:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 3 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTRONLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F';
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 4;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '%U';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128;
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/SOMEDIR/';
Edited by: Luke22 on Feb 2, 2010 12:07 PM -
Emca -config dbcontrol db fails with grid control error
hi friends
i am using oracle 11.2.0.2.0 in windows xp 32 bit
while i was trying to config the EM with the command
emca -config dbcontrol db
i am getting the following error
The existing database you have specified has Grid Control repository.This operation is not supported.
what should i do as i tried everything like i stopped the gridcontrol services already
with regards
saugatJul 28, 2011 6:23:23 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : accessdba
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: accessdba
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: D:\app\saugat\product\11.2.0\dbhome_1, and user: SYS
Jul 28, 2011 6:23:27 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Jul 28, 2011 6:23:27 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: Spooling to D:\app\saugat\cfgtoollogs\emca\orcl\emca_repos_create_2011_07_28_18_23_27.log
Jul 28, 2011 6:23:27 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMReposConfig createRepository
WARNING: ORA-25153: Temporary Tablespace is Empty
ORA-06512: at line 37
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at D:\app\saugat\cfgtoollogs\emca\orcl\emca_repos_create_<date>.log for more details.
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at D:\app\saugat\cfgtoollogs\emca\orcl\emca_2011_07_28_18_15_19.log for more details.
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error creating the repository
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:252)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:599)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1482)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:583)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:529)
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to D:\app\saugat\product\11.2.0\dbhome_1\oui
it shows thaat temp tablespace is empty -
Patch Deployment with Grid Control
Hello *,
i tried to move a patch to a 9i database. My grid-control is installed on a laptop with w2k and is running fine. The patch should be deployed to another laptop with an installed 9.2.0.4 database. The job is starting and creates the new directory and subdirectory on the target host but then the job failed with the following message.
java.net.NoRouteToHostException: No route to host: connect
I found nothing in metalink, so where is the problem?
Greetz
UlliI think this is a windows related problem. It's not so easy to transfer files to a windows workstation, ftp normally does not work, unless a ftp server is running. The formal explanation of this error says, the target host cannot be reached because of router or firewall problems, but this may be misleading in this case. If you have a support contract (hopefully), you should open a TAR.
-
Help with grid control survey....
I have to follow a grid control project, their company have AD,exchange plugin. I have to make a survey before deploying but i dont know how to ask some necessary questions to collect information, this the first time i have to do this.... I need a help, please help me. thanks
Regards
DzũngTQ.I went through a similar upgrade from 10.2.0.3GC/10.1.0.4 repository to 10.2.0.5GC/11.1.0.7 repository. What you have to make sure is that your configuration remains certified. So, given that 10.1.0.4 repository is certified against newer versions of GC, you can upgrade from 10.2.0.1 to 10.2.0.5 for GC first. Then upgrade your repository to the latest version, you can go with 10.2.0.4 or 10.2.0.5 or even 11.1.0.7.
HTH -
Can not Integrate with Grid Control
Hi all,
We are testing the feature of Ops Center 11g and Grid Control 11g. When we perform connect to Grid Control from Ops Center, all other tests are OK except a message say that we can reconfigure to another EMRepository, like this:
Job ID : testserver.90
Job Name : OEMGCManager-config
Job Type : OEMGC
Job Desc : -
Run ID : 1
Status : FAILED
Mode : Actual run
Owner : john
Create Date : 03/19/2012 11:51:53 AM ICT
Start Date : 03/19/2012 11:51:54 AM ICT
Last Updated : 03/19/2012 11:51:56 AM ICT
Execution Order : SEQUENTIAL
Failure Policy : ABORT_ON_ANY_FAILURE
Task : OEMGCManager-config
Target : EC->satellite
Status : FAILED
Result : Task failed
Logs :
03/19/2012 11:51:56 AM ICT INFO Action: config
03/19/2012 11:51:56 AM ICT INFO Started configuration procedure
03/19/2012 11:51:56 AM ICT INFO Configuration details:
03/19/2012 11:51:56 AM ICT INFO OEMGC url:jdbc:oracle:thin:@192.168.0.10:1521:testdb
03/19/2012 11:51:56 AM ICT INFO oemgc mbean: __local/com.sun.hss.domain.manager:type=OEMGCManager
03/19/2012 11:51:56 AM ICT INFO oemgc mbean: MXBeanProxy(com.sun.jdmk.JdmkMBeanServerImpl@c1f10e[__local/com.sun.hss.domain.manager:type=OEMGCManager])
03/19/2012 11:51:56 AM ICT INFO OEMGC Console connection test OK for: testsvr10
03/19/2012 11:51:56 AM ICT INFO OEMGC Repostory connection test OK for: jdbc:oracle:thin:@192.168.0.10:1521:testdb
03/19/2012 11:51:56 AM ICT ERROR Reconfiguring to another EMRepository is not supported. (101055)
We searched Google but can not see any thing to resolve this problem. So can anyone give us some advices to try? Thank you very much.Whe have same problem.
I open a ticket whit Oracle:
Job ID : ge09.73
Job Name : OEMGCManager-config
Job Type : OEMGC
Job Description : -
Run ID : 1
Status : FAILED
Mode : Actual run
Owner : root
Create Date : 04/24/2012 08:34:48 AM CEST
Start Date : 04/24/2012 08:34:48 AM CEST
Last Updated : 04/24/2012 08:34:49 AM CEST
Execution Order : SEQUENTIAL
Failure Policy : ABORT_ON_ANY_FAILURE
Task : OEMGCManager-config
Task Run ID : 335
Target : EC->EC
Status : FAILED
Result : Task failed. (15030)
Logs :
04/24/2012 08:34:48 AM CEST INFO Action: config
04/24/2012 08:34:48 AM CEST INFO Started configuration procedure
04/24/2012 08:34:49 AM CEST INFO Configuration details:
04/24/2012 08:34:49 AM CEST INFO OEMGC url:jdbc:oracle:thin:@oe01.san.gva.es:1521:GRID
04/24/2012 08:34:49 AM CEST INFO oemgc mbean: __local/com.sun.hss.domain.manager:type=OEMGCManager
04/24/2012 08:34:49 AM CEST INFO oemgc mbean: Proxy[com.sun.hss.domain.oemgc.OEMGCManagerMXBean: __local/com.sun.hss.domain.manager:type=OEMGCManager]
04/24/2012 08:34:49 AM CEST INFO OEMGC Console connection test OK for: oe01.san.gva.es
04/24/2012 08:34:49 AM CEST INFO OEMGC Repostory connection test OK for: jdbc:oracle:thin:@oe01.san.gva.es:1521:GRID
04/24/2012 08:34:49 AM CEST ERROR Reconfiguring to another EMRepository is not supported. (101055) -
Zenworks 10 SP3 and more than 2 monitors with Remote Control
I know Zenworks is touted as having support for "dual monitors", but will it support more than that for when using Remote Control? We have stations using 3 and sometimes 4 monitors.
ThanksHawk312,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Maybe you are looking for
-
I am trying to download my paid for Elements 13 upgrade. When I click on the "download" button, I receive this message: 413 Header Length too Large. Help?
-
N95 conection problem in Australia
G'Day People. I just purchased a used N95-1 and have no network conection. I live in rural QLD and I was wondering if this phone is Telstra "Bluetick" compatable?? Any advice would be helpful. I have been told by some friends it should work, so I'm n
-
Hi All, I have created an enhancement in VL01N while creating Delivery. Now when I do manual Delivery the code is working fine . Enhancement gets triggred and the desired output is achived. But the problem comes when the I uase BAPI to create the Del
-
Bootcamp: Win7, not enough memory.
I mainly run Bootcamp: Win7 for gaming such as StarTrek Online and it generally runs well. However, often when playing StarTrek Online I get a little message from the computer in the upper right hand corner telling me the game is "running in reduced
-
Hierarchy BW User Exit code EXIT_SAPLRSAP_004 ZXRSAU04
Hi All, We are loading Hierarchy data in BW using User Exit by taking data from master dat InfoObject. As we thought it's working fine; but on every 2nd load it's getting failed (1st load is success, 2nd load failed, 3rd load success likewise; so eve