Monitors & GF ti4200: Compatibility problems?

Hello everybody, i have this problem with my gforce ti4200. I posted a thread about it but i may have solved it myself. When i use it on my 15" Samsung 550v monitor there are these flickering lines across the screen, and i tried it with a 17" Philips monitor and the same problem was even more visible. I took the whole CPU over to my computer guy and he says that it works just fine on his monitor. Are there really compatibility issues? If so... what type of monitor do i need?
Thank you.
Mark

I doubt there is a compatability issue, I have not heard of any in any of the forums I visit nor have I seen anything posted here.
There could be several causes, bad power at the outlet, some type of interference caused by nearby electronic equipment or magnetic interference. Try moving to different locations or bring the tower and monitor to a friends house and see if there is a difference.

Similar Messages

  • Wierd monitor compatibility problem

    Hi all,
    Got a wierd monitor compatibility problem. G3 works fine on a sony 21" CRT.
    Connected it to a Daytec 15" CRT which works fine with a windows 98 PC.
    With the G3 I get the apple and the spinning up logo then the screen just goes blank.
    Is this monitor PC only or something? It is an old monitor but I thought any monitor should work
    if the vga connector fits?

    So you are using this directly plugged into the stock Display card in a Blue & White G3 with NO adapter?
    The Mac is probably still set for a higher resolution that the SONY can do, and has not noticed the display has changed.
    Video pros says that Video can be plugged and unplugged all day long with no bad effects. If your old display is still around, try setting it to 640 by 480, save changes, and swap the other one in "live" at that resolution.
    Other tricks:
    Reset the PRAM. This will send you back to a default setting while booting up, but may change when the system becomes active.
    Boot from a CD. This ignores the settings on your Hard drive, and boots to a very simple resolution like 640 by 480 to ensure that Most Macs can start up with it.

  • Monitor user in compatibility realm

    Hello,
    we use a compatibility realm, because we migrated our server from Weblogic 5.1 !
    Now I want to setup a read-only user for the weblogic console. It is possible to create a user for the group monitor in a compatibility realm? If yes how does it works?
    please advice ...
    Holger

    "Vikram" <[email protected]> wrote in message
    news:3eb6f601$[email protected]..
    >
    Hi,
    We are having problems seeing users or groups in our LDAP repository, thruWLS(7.0
    sp2) console. I created a Custom Security Realm(myRealm) in which I addedthe
    Novell LDAP Authentication provider as one of the authentication providersbesides
    a Default Weblogic Authentication Provider (for system user account). WhenI click
    on Users or Groups, I see either the "system" user account or"Administrators,
    Deployers, Operators, Monitors" groups.These groups and user accounts areprovided
    by the Weblogic Default Authentication provider. I am unable to see any ofour
    LDAP groups or User accounts. If I try to login to the WLS console with anLDAP
    user account, the authentication goes successfully. So WLS isauthenticating the
    user correctly but is not displaying the User and Group information in theconsole.
    We need to be able to look at the Group information in order to configurea Group
    Portal.
    Just out of curiosity, I configured an LDAP authentication provider in theCompatibility
    Security Realm and I was not able to see any of our LDAP users or groupsin the
    Compatibility Secyrity Realm also. I did reboot the WLS after configuringthe
    LDAP authentication provider in both the cases.
    I would appreciate if anybody can suggest probable reasons or workaroundsto list
    the LDAP groups in the WLS 7.0 console.
    I believe this is fixed in the latest 7.0 sp.

  • Nvidia GF4 Ti4200 Driver problems!!!

    I have built up a new system with the following:
    MSI K7N2G-ILSR
    nVIDIA GF4 Ti4200 128mb DDR
    AMD XP2400+
    512MB 333 DDR
    PSU 350W
    WD 80GB Caviar (partitioned)
    Thermaltake Volcano 9 HSF
    I have installed XP-PRO (+SP1). The problem I have is the drivers.  First off I install the nFORCE 2 platform drivers - Fine, then I install the VGA Driver disc 40.72's. According to the installation, all is fine.  When the system reboots, we have a no go (blank screen). I then need to go back to last known settings....yeah, yeah!
    So far I have downloaded nearly all the drivers off the Nvidia site as well, using my other PC. (1MB CABLE).  Each one cause pretty much the same problem, including all the WHQL versions.
    I even downloaded the Nvidia nFORCE 2 platform package, which included a VGA driver.  This still caused the same result.
    My next step was to swap over with my other PC.  Once I inserted a GeForce2 64MB DDR PRO/GTS, all appears fine, the drivers install...no problem.
    I insert the GF4 Ti4200 into my ECS K7S5A, and low and behold all is fine here.....drivers, no problems.
    Any idea's......anyone??????
    Like compatibility problem or what..... I'm totally lost and confused now!!
    MARKONE.

    No, Markone from UK, novice PC builder..... :D
    Borgstif:  
    "uninstall the driver in safe mode and the Reg entry in WinXp "
    Explain exactly what you mean, I can choose start up in safe mode yes, but what will that do for me??
    gfilitti:  
    Not sure exactly what specs you want? this is my first build ever.  The PSU is a bog standard fitment inside an ATX Case, not a separate fitment.  Can you be more specific about "timing etc..."
    The Ti4200 is working fine in my less advanced ECS K7S5A machine......with 300W PSU.
    And likewise the Nforce 2 machine operates my Geforce 2 GTS/PRO also with no problems.
    Markone.

  • MSI GTX 660 OC compatibility problem with MB

    I recently got the MSI GeForce GTX 660 OC TwinFrozr III 2GB DDR5 192-bit and Gigabyte GA-B75-D3V.
    Problem is: when I start the computer, the monitor doesn't show anything, it's like it's on stand-by. I then connected the GTX 660 to another computer with a pci-e 2.0 motherboard and worked fine (didn't install drivers, just started the computer and saw that it shows stuff on the monitor). I then connected another GPU  (Gigabyte GT 420) to my  new pc and worked fine aswell (showed stuff on the monitor).
    My question is: is there a compatibility problem between the gpu and the motherboard? Do I need to make a bios upgrade?
    Thank you for your help! 

    VGA S/N?
    also save current vbios with nvflash http://www.techpowerup.com/downloads/2133/NVFlash_5.118_for_Windows.html
    nvflash -b myrom.rom [ENTER]
    then upload myrom.rom somewhere and give a link to it

  • Has anybody gotten this popup error message: ASI Eve CL Monitor has encountered a problem and needs to close

    Has anybody received this error message: ASI Eve CL Monitor has encountered a problem and need to close?
    == This happened ==
    Every time Firefox opened
    == Don't know

    I don't think this is a Firefox problem. I have the same error message and I get it regardless of whether I'm using Firefox or another browser.
    In checking [http://www.whatsrunning.net/QueryProductID.aspx?Product=16854] it is a file owned by Microsoft. I suggest you check your registry for errors.

  • Are There Compatability Problems Wtih Adobe Photoshop CS2 On The Windows Portion of iMac?

    I understand that there are compatability problems with CS2 and lower vesions of the creative suite in relation to Leoapard OSX. Are there any compatability problems with CS2 for Windows if I install it on the Windows (using XP) partition of an iMac that uses the Leopard OSX?
    Please advise. Thanks.

    If its not running in Leopard you should be fine.
    don't confuse running PowerPC software in Rosetta (PPC emulation) with running CS2 in XP which is native. It like apples and oranges. there is nothing in common.

  • HT5085 I would like to upload my music library from my PC to the Cloud through iTunes Match.  I also will be purchasing a Mac in the near future and would like to download some of that music from iCloud to my Mac.  Will I have compatability problems?

    I would like to upload my music library from my PC to the Cloud through iTunes Match.  I also will be purchasing a Mac in the near future and would like to download some of that music from iCloud to my Mac.  Will I have compatability problems?

    You should have no problems. To add a second computer or device to iTunes Match, see:
    http://support.apple.com/kb/ht4913
    Regards.

  • I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem

    I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem with my new camera? Will upgrading elements to a newqer version solve the problem?

    NEF's for the D7100 should work with the latest version PSE13
    You can download here and try free for 30 days:
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 #

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • Replacing Firefox 3.6.16 containing my history, bookmarks etc by version 4.0, I find that it will not open on my Mac Power PC G4 running on OS 10.4.11. Is there is a compatibility problem and how do I retrieve version 3.6 with my bookmarks etc

    Replacing Firefox 3.6.16 containing my history, bookmarks etc by version 4.0, I find that it will not open on my Mac Power PC G4 running on OS 10.4.11. Is there is a compatibility problem and how do I retrieve version 3.6 with my bookmarks etc.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    When you install one of the above it will use your existing bookmarks etc

  • Windows Media Player 11 is needed for video on fav website, but version for firefox isn't working. Is this a compatability problem with Windows 7?

    My favorite jewelry website requires a plug-in to operate. Installation of the plug-in is offered, but will not download and function. Is this a compatibility problem for Windows 7?

    Link to that site please.

  • How can I Download Adobe Acrobat 7 Standard (needed due to a compatibility problem)?

    How can I Download Adobe Acrobat 7 Standard (needed due to a compatibility problem)?

    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • Shockwave player updates: graphics card compatibility problems?

    I've recently had a new problem reported to me in the Driveway Visualiser, a piece of Shockwave 3D content that I've been maintaining since we built it in 2008.  I'm wondering if  recent updates to the Shockwave Plugin (e.g. 11.5.8.612) may be contributing to this...
          www.marshalls.co.uk/transform/driveway_visualiser/dv.asp
    So I'd be interested to know if anyone else has had any new problems affecting old content. I tried reverting the dcr file to last year's version but the same problem still occurs, so it doesn't seem to be a recently-added bug in my code.  I think it could be either a compatibility problem between the graphics card and the plugin, or between the Director 11.0 dcr and the Shockwave 11.5 web player.
    Because we need the DirectImage Xtra, it's Windows only.  For  each different computer that we've tested, the Driveway Visualiser (DV) will either always  work or always fail on that machine - regardless of whether IE or  Firefox is used.  All the test machines have DirectX 9.0c; all are  running Win XP SP3 apart from one laptop with SP2 and Intel 965 chipset  on which the DV fails.  Only one has Director (11.0) installed, and on  that the DV always works.  The problem is much more common on laptops,  so we reckon that Shockwave's ability to interface with the various  graphics cards might be the reason why it's not getting the image  property of a 3D cast member.
    So here's what's actually happening:
    When you get to step 4 of the DV, after you've drawn round the shape of your driveway, it tries to grab the image of a 3D cast member referred to by the  variable gWorldMember, and fails with the "four parameters expected" error message, on  this line of code...
          zoomAfterImage.copyPixels(gWorldMember.image, zoomAfterImage.rect, gWorldMember.image.rect)
    gWorldMember.image is being returned as <image:0> (not a usuable  image) and so its rect property does not exist, hence the crash.  This  line of code crashes whether or not there's a sprite of the relevant 3D  member on the stage at the time.  The member's defaultRect has been  temporarily changed so we can grab a 1024x1024 image off it.  Using  copyPixels, this image is resized down to the size of the zoomAfterImage  image variable (again 450x450).  This gives us an image at the original  size of 450x450, but with a softer image quality than if we'd grabbed  it from the 3D member at that size.
    Is anyone suffering similar problems or aware of what Adobe has been changing in the player?  At the moment I just don't see how I can fix this by changing my code...

    I had wondered if there was a clash between the Director 11.0 dcr and the Shockwave 11.5 player, so I downloaded the Director 11.5 trial and re-published it using that.
    It didn't make any difference, so I'm left with my original suspicion that Shockwave is failing to interface with certain graphics hardware setups via directX, when it tries to read the image property of a 3D cast member.

  • IMac 27" & External monitor ( Benq 241 ) resolution problems

    Hi, im using a 27" imac... recently just bought a mini displayport to HDMI cable to hook it up to my 24" Benq 241 monitor.
    Im pretty sure ive used this monitor before without a problem on my old macbook.
    The monitors max resolution is : 1920 x 1200
    but im only getting the option of :
    1080i
    1080p
    720p
    480i
    480p
    1600 x 900
    1344 x 1008
    .... the rest go down in numbers
    selecting 1080p gives a fuzzy picture... and 1080i, is what looks liek the highest - but still really pixellated
    any ideas?

    You can get one like this
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?fnode=MTY1NDA3Ng
    But you can also get an inexpensive one from Monoprice
    http://www.monoprice.com/products/subdepartment.asp?c_id=104&cp_id=10428
    They usually work well

Maybe you are looking for