Monitors problem on startup - weird flickering, zigzag distortion

I'm at work on a G5 PowerPC Dual 2GHz, OS 10.5.6.
After upgrading to Leopard in a different studio, and then switching this CPU to a studio with two Samsung 214T 21" Monitors connected via DVI, a problem has started. When starting up, both monitors show a distorted desktop display. The displays both show the same broken up vertical columns, about 3 inches wide, and every other column shows a sliced-up portion of the desktop. Also there is weird zigzag flickering in some columns. As soon as I select any monitor resolution, or turn on mirrored displays, the monitors act fine. It seems like it may be a sync-type of problem but I'm not sure.
This problem did not happen in the original studio when the CPU was upgraded to Leopard. That studio had two Samsung VGA displays connected with DVI adapters.
Please note that I tried resetting PRAM, I gave it 4 chimes.
Also note this CPU is used for sound editing, It has Pro Tools HD hardware, as well as a recently installed Blackmagic Decklink PCI video capture board.

I am having the same problem, and i have seen reports of similar effects with other models of HP laptops. It appears to mainly be a problem in the signal from the graphics card to the screen, so either the plugin on the motherboard, the plugin on the back of the LCD screen, or the wire ribbon itself. I isolated mine to being a loose wire ribbon and by reseating the connection on the LCD screen, mine was repaired. I still keep an eye on it because if one place can be effected by socket creep, they all can. (socket creep is where a plugin or socket location disconnects over time for no other reason other than age)
Give it a try if you know what you are doing in that aspect, if not you may need to take it to a servicing center and have them do it. I suggest learning how to do it yourself, as once you begin learning how to maintenance your own machine, you can troubleshoot many different problems based on experiences with others.
Hope this helps! Best of luck to you!

Similar Messages

Possibly mundane Mini-DVI to VGA into an external monitor problem

Hi,
I've had a look over the interwebs regarding my problem and it seems as if it's not unusual to have external monitor problems but I'm not sure if mine is slightly different:
I had a perfectly working set up with my new Macbook (the white one, '06 model I believe), that was connected to my Hanns-G HU196D monitor via a mini-DVI to VGA adapter, no problems whatsoever. But for a couple of weeks now my Macbook just flickers a light blue colour, with nothing at all on the monitor, and my macbook is unusable until I remove the adapter. I've read about updating firmware but I can't see my desktop once the macbook is connected to the monitor so it's not possible to configure anything. I've read somewhere that my external monitor isn't compatible with this set up, but it was until a couple of weeks ago!
My Macbook's 4 months old now and since then I've bought a new mini-dvi to vga adapter and a new VGA cable, no connections seem loose on either mini-dvi port or my monitor's vga port.
Thanks if you can help!
Jack

You will need to use a mini Dvi-dvi and a dvi-svideo/rca adapter.
Joy joy hallelujah.
Pardon the sarcasm...I just wasted 3 hours of my life trying to sort the issue out.
Heard a KWORLD PlusTV PCTOTV Converter SA235 USB 2.0 Interface would sort the issue out for under 40$ but it's not Mac.
Hope that helps.
~r

Dual monitor setup - primary monitor blank upon startup

Hello -
This has been vexing me for some time now. I've seen hints of this issue from other people but never the exact same circumstances and never do I see a definitive answer.
I have a dual monitor arrangement on my 8 core Clovertown (first generation) Mac Pro. After shutting the machine down, when I start it back up, the primary monitor almost always flickers very quickly then goes black while the machine boots, and the secondary monitor kicks on. Note - this never happens on restarts or waking up from sleep mode; just after starting up after completely shutting the machine down.
Exact specs are:
The afore mentioned first-gen 8 core Mac Pro (spring 2007), combined with an ATI 4870 graphics card, with the 24 inch Cinema Display LED serving as primary monitor (the one that's useless upon starting up), and my older 23 inch LCD as secondary display. Also worth noting - I'm aware the ATI 4870 is not officially supported in this generation of Mac Pro, however there were so many reports on the web of it working that I did the swap-out myself, and ended up getting the 24 inch LED since I then had the Mini Displayport on the back of my machine.
The only way I manage to get my machine working after starting back up is to restart it several times - literally up to over a dozen attempts sometimes, before the primary display finally does start functioning and I can begin working as normal.
Because there were many reports of the ATI 4870 working fine with this Mac Pro and word of other flickering monitor problems, I thought I'd ask despite the graphics card not being officially supported. Any ideas on how to remedy this problem so I don't have to keep restarting over and over before both my screens eventually work?
Thank you in advance.

So I have the same issue. I run dual 23" Apple Cinema Displays. For a while now the main monitor has had trouble waking up. I have also been unable to put the Display to sleep from the power button on the display. The other monitor seems to go to sleep fine. So when I get it to sleep and it won't start up, I usually restart and everything is fine. Today I can't get that monitor to come up at all. In addition, I have swapped ports on the video card switching the order of the monitors, no change. I also checked in my System Preferences>Display, and the system is still recognizing two monitors. So I am guessing my issue is related to the Display itself. What can be done at this point?

Problem in startup of Shadow Instance (START_SHDI_FIRST)

Hi Experts
I am having problem in 4.6B - ERP6.0 Upgrade. I have problem in startup of Shadow Instance. Here is log description.
DEVTRACE.LOG
trc file: "dev_ms", trc level: 1, release: "700"
Thr 01 Fri Feb 22 19:53:01 2008
Thr 01 MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 7614
Thr 01 ***LOG Q01=> MsSInit, MSStart (Msg Server 1 7614) http://msxxserv_mt. 1824
Thr 01 SigISetDefaultAction : default handling for signal 18
Thr 01 load acl file = /usr/sap/put/<SID>/SYS/global/ms_acl_info
Thr 01 MsGetOwnIpAddr: my host addresses are :
Thr 01 1 : http://192.168.21.21 <hostname> (HOSTNAME)
Thr 01 2 : http://127.0.0.1 localhost (LOCALHOST)
Thr 01 MsHttpInit: full qualified hostname = <hostname>
Thr 01 HTTP logging is switch off
Thr 01 ms/icf_info_server : deleted
Thr 01 *** I listen to port sapmsSHD<SID> (3602) ***
Thr 01 CUSTOMER KEY: >L0506167855
trc file: "dev_rd", trc level: 1, release: "700"
Fri Feb 22 15:25:15 2008
***LOG S00=> GwInitReader, gateway started ( 1059) http://gwxxrd.c 1691
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: single threaded, ASCII, 64 bit, optimized
pid 1059
gateway runs with dp version 232(ext=109) (@(#) DPLIB-INT-VERSION-232)
gateway (version=700.2007.10.01)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Bind service sapgw02 (socket) to port 3302
GwPrintMyHostAddr: my host addresses are :
1 : http://192.168.21.21 <hostname> (HOSTNAME)
2 : http://127.0.0.1 localhost (LOCALHOST)
Full qualified hostname =
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Fri Feb 22 15:25:20 2008
DpShMCreate: sizeof(wp_adm) 70080 (960)
DpShMCreate: sizeof(tm_adm) 51017496 (25496)
DpShMCreate: sizeof(wp_ca_adm) 184800 (88)
DpShMCreate: sizeof(appc_ca_adm) 8800 (88)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/8/2192040/2192048
DpShMCreate: sizeof(comm_adm) 2192048 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1840)
DpShMCreate: sizeof(wall_adm) (224040/346312/80/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: ffffffff5bc00000, size: 54051296)
DpShMCreate: allocated sys_adm at ffffffff5bc00000
DpShMCreate: allocated wp_adm at ffffffff5bc01cc0
DpShMCreate: allocated tm_adm_list at ffffffff5bc12e80
DpShMCreate: allocated tm_adm at ffffffff5bc12ee0
DpShMCreate: allocated appc_ca_adm at ffffffff5ece77d8
DpShMCreate: allocated comm_adm at ffffffff5ece9a38
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at ffffffff5ef00ce8
DpShMCreate: allocated gw_adm at ffffffff5ef00d68
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at ffffffff5ef00d98
MtxInit: -2 0 0
Fri Feb 22 15:25:26 2008
GwDpInit: attached to gw_adm at ffffffff5ef00d68
Fri Feb 22 15:25:44 2008
caught SIGINT (2)
***LOG S30=> GwStopGateway, gateway stopped () http://gwxxrd.c 14586
STARTSFI.LOG
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080222195300")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '02', GwService = 'sapgw02'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SW<SID>H"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/put/<SID>/homeshd/<SID>
4 ETQ399 ext. env.: LD_LIBRARY_PATH=/usr/sap/put/<SID>/homeshd/<SID>:/usr/j2se/jre/lib/sparc/c
lient:/usr/j2se/jre/lib/sparc:/usr/j2se/jre/../lib/sparc:/oracle/<SID>/102_64/lib:/usr/sap/I
TC/SYS/exe/run:/oracle/client/10x_64/instantclient
4 ETQ399 2008/02/22 19:53:00: put_execute: (startsap) forkpid:7500
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
Please let me know if you have any ideas.
Thanks & best Regards
L Raghunahth

Hi ,
I am forwarding the dev_w0 log.
dev_w0 ==> log is as follows
M Fri Feb 22 15:25:26 2008
M ab_init o.k.
M ThrInitGlobals o.k.
M ThrCreateShObjects           allocated 150834 bytes at ffffffff52200000
M SosRegisterMemAddr: add mem addr ffffffff52200000 / >thr_serv_info<
M SosRegisterMemAddr: add mem addr ffffffff52200010 / >thr_wpadm<
M ThrCreateShObjects o.k.
M SosRegisterMemAddr: add mem addr 1050aace0 / >ztta<
M SosRegisterMemAddr: alloc/realloc table
M SosRegisterMemAddr: add mem addr 105328a60 / >spa<
M ThrRegisterMemAddrs o.k.
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtRegJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtRegWpWriterJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegWpJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegUsrJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegMemJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegSysJavaNatives failed (-1)
M ThrInitRunTime o.k.
M ab_startup o.k.
N SsfSapSecin: putenv(SECUDIR=/usr/sap/put/<SID>/DVEBMGS02/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/put/exe/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
M load shared library (/usr/sap/put/exe/libsapsecu.so), hdl 1
N ===...sucessfully completed.
N =================================================
M
M Returncode of AlMCCreateAttach (): 50
M Returncode of AlMOCreateAttach (): 50
M Returncode of AlSmesCreateAttach (): 50
M *** Start of API function likey_init ***
M likey_init: sid = "<SID>"
M likeymem_calloc (2, 21) for type "List of the SW products" returns 1050a55e0.
M likey_init: products [0] = "R3_ORA              "
M likey_init: products [1] = "R3_BASIS            "
M likey_init: basis_release = "700"
M likey_init: temporary license keys allowed.
M likey_init: running within the SAP WebAS ABAP.
M Generated absolute filename of the verify PSE: "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerif
y.pse"
M PSE name "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerify.pse" memorized.
M The contents of the PSE file "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerify.pse" is the 2038
version.
M SAPSECULIB initialized by calling SsfLibGetToolkit ().
M likeyper_init: insert_record memorized.
M likeyper_init: update_record memorized.
M likeyper_init: delete_record memorized.
M likeyper_init: get_record memorized.
M likeyper_init: get_all_records memorized.
M likeyper_init: cleanup memorized.
M likeyche_get_existing_buffer: buffer found in EG memory.
M likeyche_get_existing_buffer: magic number okay, reserved entries = 5, used entries = 0
M *** End of API function likey_init ***
M SAPlicense: LIKEY initialisation done
M ThBtcClnZombies o.k.
M Enq-Reset-Registration o.k.
M SosRegisterHook: add hook >rsts_storage_free(101a2ee78)< for event AFTER_STORAGE_FREE
M SosRegisterHook: add hook >rsts_before_commit(101a2efb0)< for event BEFORE_COMMIT
M SosRegisterHook: add hook >rsts_after_commit(101a2f098)< for event AFTER_COMMIT
M SosRegisterHook: add hook >rsts_after_rollback(101a2f168)< for event AFTER_ROLLBACK
M SosRegisterHook: add hook >rsts_after_rollback(101a2f168)< for event AFTER_ROLLBACK_WOR
K
M SosRegisterHook: add hook >rsts_after_rollin(101a2acd0)< for event AFTER_ROLL_IN
M SosRegisterHook: add hook >rsts_before_rollout(101a2acec)< for event BEFORE_ROLL_OUT
M DpISetTrcLog: trc logging active, max size = 20971520 bytes
M DpISetTrcLog: sw<SID>h off trace logging global is off
M DpISetTrcLog: trc logging active, max size = 20971520 bytes
M ThSetTrcLogParam2 o.k.
M register db commit/rollback hook o.k.
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M MskiInitLogonTicketCacheHandle o.k.
M ThrtRegisterJCoNatives o.k.
M JrfcVmcRegisterNativesDriver o.k.
M ThJRegNatives3: java not active
M EnqVmcRegisterNatives failed
M ThJRegNatives3: java not active
M JMonVmcRegisterNatives failed
M ThJRegNatives3: java not active
M JTSAuthorityRegisterNatives failed
W =================================================
W === ipl_Init() called
W    ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
M ipl_Init returns 2 ITSPE_DISABLED: Service is disabled (sapparam)
M SosRegisterHook: add hook >DbgBeforeSessionEnd(100495c64)< for event BEFORE_SESSION_END
M SosRegisterHook: add hook >DbgBeforeTaskSw<SID>h(10049575c)< for event BEFORE_TASK_SW<SID>H
M ThDbgInit returns 0
M ThJRegNatives3: java not active
M ThDSysEnv: delete environment
M REL WP ca_blk 56
M ThDtWpBlk: detach WP ca_blk 56
M REL APPC ca_blk 2
M ThDtAppcBlk: detach APPC ca_blk 2
M ThIEmFree: delete hyper context (hyperHdl=fffffffdd99f1e60)
M ThIEmFree: call EmContextDelete (em_hdl=0)
M set act fields to T-1/M255
M ThSetProcessPriority o.k.
M SosRegisterMemAddr: add mem addr ffffffff57412e80 / >tm_adm_list<
M SosRegisterMemAddr: add mem addr ffffffff57412ee0 / >tm_adm<
M SosRegisterMemAddr: add mem addr ffffffff57401cc0 / >wp_adm<
M SosRegisterMemAddr: add mem addr ffffffff53000000 / >wp_ca<
M SosRegisterMemAddr: add mem addr ffffffff5a4ba5f8 / >wp_ca_adm<
M SosRegisterMemAddr: add mem addr ffffffff5a4e9a38 / >comm_adm<
M SosRegisterMemAddr: add mem addr ffffffff5702edc0 / >appc_ca<
M SosRegisterMemAddr: add mem addr ffffffff5a4e77d8 / >appc_ca_adm<
M SosRegisterMemAddr: add mem addr 0 / >vmc_adm<
M SosRegisterMemAddr: alloc/realloc table
M SosRegisterMemAddr: add mem addr ffffffff57400000 / >sys_adm<
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M db_commit98 (keep resources) o.k.
M SigSave o.k.
M rdisp/rfc_use_quotas : 1
M rdisp/rfc_max_queue : 5
M rdisp/rfc_max_login : 90
M rdisp/rfc_max_own_login : 25
M rdisp/rfc_min_wait_dia_wp : 1
M rdisp/rfc_max_own_used_wp : 75
M rdisp/rfc_max_comm_entries : 90
M rdisp/rfc_max_wait_time : 15
E Fri Feb 22 15:25:29 2008
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M init lock table o.k.
M ThrSetMemHdl o.k.
M ThInit o.k.
M SigIRegisterExitRoutine: exithandler installed (ThSigHandler)
M TskhLoop: tell dispatcher: I'am ready for processing
M LOCK WP ca_blk 56
M LOCK APPC ca_blk 2
M ThIEndBg: end background processing of T-1 (type=0x41, logoff=1, freeResources=0)
M ThISend: (tm/user/type/info = -1/           ?/0x41/0x0, mode_deleted=1)
M    TASK_SW<SID>H
M    DISP
M abap strategy ROLL / O.K.
M ThRqOutCheck: o.k.
M ThNewWpStat (type=0x41, task_sw<SID>h=1, inline_hold=0, hand_shake=0, debug=0, ..)
M ThISend: new wp stat: 0x2
M rdisp/wp_auto_restart = 0 sec
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThDtWpBlk: detach WP ca_blk 56
M ThISend: clear stat record
M PfClearAllRec: clear statistic area
M ThISend: stat_state = TH_STAT_CLEAR
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
M make DISP owner of wp_ca_blk 56
M DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 18)
M -OUT- sender_id WORK_PROCESS      tid -1    wp_ca_blk   56      wp_id 0
M -OUT- action    SEND_TO_DP        uid -1    appc_ca_blk -1      type NOWP
M -OUT- new_stat WP_WAIT           mode 0     len         8       rq_id 18
M wake_evt_udp_now 1, no dgram needed
M REL APPC ca_blk 2
M ThDtAppcBlk: detach APPC ca_blk 2
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SW<SID>H
M TrThHookFunc: called for task sw<SID>h
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SW<SID>H
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SW<SID>H
M ThCallHooks: call hook >DbgBeforeTaskSw<SID>h< for event BEFORE_TASK_SW<SID>H
M
M ********* W0 LOOP (DIA) *********
M TskhLoop: save spa pointer 105328a60 and install dummy spa
M ThRqWaitFor: wait for next request (new time slice)
M event-handling: W0, key 50240, flag 50240
M ThAlarm: no previous alarm
M ThRqWaitFor: wait for request
M Fri Feb 22 15:25:42 2008
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThCallDbBreak: use db_sqlbreak
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ThDBDisconnect: disconnect from data base
B Disconnecting from ALL connections:
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time
DBHost
B 000 000 R/3              000000000 INACTIVE     NO YES NO 000 255 255 20080222 152515
<hostname>
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=105b54538,usrhp=105b51478)
C Detaching from DB Server (con_hdl=0,svchp=105b54538,srvhp=105b56868)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=2, com_tx=0)
B statistics db_con_rollback (roll_total=0, roll_tx=0)
M ThDBDisconnect: disconnect o.k.
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1060) [dpuxtool.c   260]
M Good Bye .....
Best Regards,
L Raghunahth

Problem during startup of NWDS - Error while opening NWDS -

Hi,
iam unable to start up NWDS.problem during startup of NWDS
Error when double click the NWDS to open.
Error in .log file of workshop[--
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 03, 2007 15:59:04.226
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:2330)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:101)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
     at org.eclipse.swt.widgets.Display.release(Display.java:1782)
     at org.eclipse.swt.graphics.Device.dispose(Device.java:212)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1390)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more

Hi nayab,
                 Ur workspace metadata seems to be corrupted. Go to ur workspace. rename .metadata folder & open the NWDS. It will not show ur previous configuration so u have to import the Development configuration again. In case ur any activity is open, it will come back when u import the Development Configuration.
regards
Sumit

Problem in Startup 10g DB

Dear all
i m facing a little problem in startup 10g DB i m using 10g DB on Windows 2000 Professional operating system
when i start data base from enterprize manager i log on SYS user then i select Startup then i feed some parameter like
1) Host Credentials
Specify the OS user name and password to login to target database machine
i feed there operating system user name & passowrd
then
2)Specify the credentials for the target database.
To use OS authentication, leave the user name and password fields blank.*
i enter sys user and his password
Database yasir
Connect As SYSOPER
when i pressed OK button then ii face that error
Error Message
RemoteOperationException: ERROR: Wrong password for user
but my both password operatin system & sys password are correct
any one have any idea what is problem & how can i slove my problem
Thanks
Rizwan

From control panel go to
1. Administrative tool---local security policy---local security settings
2.From the local security settings windows: local policies---user rights assignment
3.double click "log on as a batch job, add the administrative user you want to assign on the OEM.
Hope this works for you.

I faced white screen with gray line problem on startup. How to fix it?

I faced white screen with gray line problem on startup. How to fix it?

Hi vikashjha,
Thanks for visiting Apple Support Communities.
You may find some of the troubleshooting steps in this article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Jeremy

Recovery harddrive is reporting a problem on startup. where do I start on trouble shooting the drive

Recovery harddrive is reporting a problem on startup. where do I start on trouble shooting the drive

Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run a tests on the whole Hard Drive. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problems during startup NWDS

Hello Experts,
Need your help: I got an error "Problems during startup, Check the ".log"....." when starting NWDS. I checked .log, here is the errors:
org.eclipse.core.internal.boot.DelegatingLoaderException: org.eclipse.core.runtime.CoreException: Problems encountered starting up plug-in: "org.eclipse.core.resources".
at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:754)
at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
at org.eclipse.core.internal.plugins.PluginClassLoader.activatePlugin(PluginClassLoader.java:112)
Any suggestions/advises?
Thanks, Jin

Hi,
Take the backup of .metadata folder, then delete that from your workspace.
If you delete the .metadata file - It will no do any harm to your existing projects in your workspace.
But you need to import them into the NWDS again.
If there is any issue you delete the new .metadata and place the old backup .metadata.
There are no issues. I did that just now
Or
Instead of deleting the .metadata you can try giving the new workspace in -data of NWDS.
And in new workspace copy your old projects (from old workspace) and import them again into NWDS.
How to give -data
Right click on NWDS shortcut on desktop and in shortcut tab
in target input:
For example already you have like this
D:\IDE70\eclipse\SapIde.exe -vm "C:\Program Files\Java\jdk1.5.0_04\bin\javaw.exe"
then at the end add
-data "C:\NewWorkspace"
Regards,
Charan

Monitoring services Automatic startup type

I've installed Opsmgr 2012 R2 CU5 in a test environment. Going to replace our Opsmgr 2007 R2 live environment within 2 months.
I want to monitor all Automatic startup services. In Opsmgr 2007 R2 I created an override for the rule " A service terminated Unexpectedly". Did the same In Opsmgr 2012, but I don't get an alert if I stop a service. I noticed that there or a few
services in the "Core Windows Services Rollup" monitor that do create an alert if I stop them.
What am I missing?
Thanx

I've got something similar in my toolbox. No clue where I've got the VBS from (ages ago, thanks to the author :-) ) but it still works fine:
<UnitMonitor ID="Syliance.Windows.Server.Extension.ManagementPack.Generic.Service.Monitor" Accessibility="Internal" Enabled="false" Target="Windows!Microsoft.Windows.Server.Computer" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="Windows!Microsoft.Windows.TimedScript.TwoStateMonitorType" ConfirmDelivery="false">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="Syliance.Windows.Server.Extension.ManagementPack.Generic.Service.Monitor_AlertMessageResourceID">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Error</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/Property[@Name='Description']$</AlertParameter1>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="Success" MonitorTypeStateID="Success" HealthState="Success" />
<OperationalState ID="Error" MonitorTypeStateID="Error" HealthState="Error" />
</OperationalStates>
<Configuration>
<IntervalSeconds>300</IntervalSeconds>
<SyncTime />
<ScriptName>Monitor_Auto_Services.vbs</ScriptName>
<Arguments>/Exclude:"'Microsoft .NET Framework NGEN v4.0.30319_X64' 'Microsoft .NET Framework NGEN v4.0.30319_X86' 'Performance Logs and Alerts'"</Arguments>
<ScriptBody><![CDATA[' Monitor if any automatic service is not running
' Excluded: Performance Logs and Alerts service is auto but never running
' Create a two state timed generic script unit monitor
' HEALTH EXPRESSIONS
' Healthy Property[@Name='State'] Contains GOOD
' Unhealthy Property[@Name='State'] Contains BAD
' ALERT DESCRIPTION
' $Data/Context/Property[@Name='Description']$
Set oAPI = CreateObject("MOM.ScriptAPI")
Set oShell = CreateObject( "WScript.Shell" )
Set arArgs = WScript.Arguments.Named
Set oBag = oAPI.CreatePropertyBag()
dim StateRegPath : StateRegPath = "HKLM\" & oAPI.GetScriptStateKeyPath("ServicesStopped")
On Error Resume Next
GetState = oShell.RegRead(StateRegPath & "\ServicesList")
on error Goto 0
allGood = TRUE
RepeatDown = FALSE
sExcludeList = arArgs.Item("Exclude")
Set oWMI = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\cimv2")
'Get System Uptime, if recently rebotted, do not continue
Set colOperatingSystems = oWMI.ExecQuery("Select * From Win32_PerfFormattedData_PerfOS_System")
For Each objOS in colOperatingSystems
intSystemUptime = Int(objOS.SystemUpTime)
Next
If (intSystemUptime > 900) Then
Set allSvc = oWMI.ExecQuery("Select * from Win32_Service Where StartMode = 'Auto'")
For Each oSvc in allSvc
If (oSvc.Started = FALSE and instr(1,sExcludeList,"'" & oSvc.DisplayName & "'") < 1) Then
sList = sList & oSvc.DisplayName & ", "
allGood = FALSE
if instr(1,GetState,oSvc.DisplayName) > 0 then RepeatDown = TRUE
End If
Next
If allGood = TRUE then
Call oBag.AddValue("State", "GOOD")
call oShell.RegWrite (StateRegPath & "\ServicesList", "", "REG_SZ")
Else
if RepeatDown = TRUE then
Call oBag.AddValue("State", "BAD")
Call oBag.AddValue("Description", "Automatic service(s) not running: " & sList)
end if
call oShell.RegWrite (StateRegPath & "\ServicesList", sList, "REG_SZ")
End if
Else
Call oBag.AddValue("State", "GOOD")
End If
Call oAPI.Return(oBag)]]></ScriptBody>
<TimeoutSeconds>60</TimeoutSeconds>
<ErrorExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">BAD</Value>
</ValueExpression>
</SimpleExpression>
</ErrorExpression>
<SuccessExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">GOOD</Value>
</ValueExpression>
</SimpleExpression>
</SuccessExpression>
</Configuration>
</UnitMonitor>
</Monitors>
HTH,
Cheers,
Patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

Batch Monitor Problem

Hi,
When I run batch monitor, i get this weird thing that no matter what I do, it keeps asking if I want to allow incoming connecting, and not matter how many times i hit allow, and having set it up the same in the security preference pane it still does the same.
Any idea?

joey848 wrote:
Turn off your firewall or set it to Allow incoming connections for batch monitor.
I allowed it every time it asks.
So far I have silenced it by answering no and then allowing in firewall settings.
But every time Batch Monitor starts, same thing again and again...

My screen on my iPad has gone weird flickering colour and negative look about it

My screen on my iPad has gone weird flickering colour and negative look about it any ideas

Settings>General>Accessibility>Invert Colors>Off

M93p dual monitor problems; monitor turns off and cannot be turned on again

Hi,
we have multiple M93p tiny computers causing problems in dual monitor setup (VGA / Displayport->DVI). Our users (already >5) keep telling us, they leave their workplace, return, then DVI attached monitor if off and they do not find a way to turn it on. This is true; the only workaround that has been found by our users is to bring Win7/32bit into standby mode and awaking it again.
Needless to say, we turned all windows energy saving options off (computer standby/hibernate, monitor turn off). Still the problem appears.
Maybe there is something wrong with DVI power/DVI signal?
- Monitor independent, as far as I can see
- Independent from Windows energy saving modes
- BIOS updates did not help
[todo]: Try Intel/(AMD?) drivers, let users test.
I haven't seen exactly when the monitor turns off because it is reported by users. I had a testing machine, but was not able to reproduce.
http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/Dual-monitors-problem-VGA-and-Displaypor... is related.
Anyone?
Thx

Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Activity Monitor problems increase CPU and power burn

Migration Assistant worked very nicely, transferring from a Powerbook G4 with 30GB of files and data in about 45min via Firewire.
However, after 2 days of usage, the CPU was still running at 80% and applications were incredibly sluggish. My battery calibration at full charge only showed a little over 1 hour. Activity Monitor also would not show any processes -- the list was completely blank.
The solution was to rename the Preferences folder, allowing programs to create a new Preferences folder. I then selectively populated the new folder with the main old preferences for mail, Safari, etc. This not only solved the Activity Monitor problem, but immediately drove down the CPU usage to about 10% where I'd expect it. Now the battery shows over 2.5 hrs on a full charge with the screen on full brightness (and it's BRIGHT!)
Also, Microsoft Word/Powerpoint/Excel/Entourage: trial software on the MacBookPro will mess up your migration, so delete the trial software BEFORE MIGRATION ASSISTANT.
Hope this helps some of you out there!

Another thing users who run Migration Assistant should know is that many of your background processes and helpers may slow down the Macbook.
For example, I notice that a bunch of PowerPC menu items running under Rosetta slowed things down. Also, the Microsoft Office Autoupdate background process, which is started from System Preferences > Accounts > Login Items constituted one Rosetta process running all of the time.
When I remove/disabled these background processes, I noticed a significant difference.

Very weird monitor problem, betcha can't solve this one.

OK I have a MacBook Pro 2.4GHz with 4GB of Ram, it's fully up to date with Lion, and is connected to a Formac W2300-1U 23 inch TFT Monitor (DVI, VGA, 1920 x1080, 1000:1, 5ms, 400cd/m²) through a HDMI to Mini port adaptor.
Now, the problem is the monitor flicks off, then on, at first I thought it was just randomly, but today I isolated the problem to something specific that make it happen. When I open the preference panel, and click on 'Trackpad' as soon as the video demo starts to play the monitor switches off then on.
It's totally weird, what on earth could be causing this? Any ideas?

ok well i have no idea what happened. i started out again with a fresh installation of JBoss, and it worked. no clue as to what was wrong. musta been some JAR that was out of place or something.
thank you for your help!

Monitors problem on startup - weird flickering, zigzag distortion

Similar Messages

Maybe you are looking for