Mono outs in channel strip possible?

i have created a couple of mono output channels in my audio mixer, but they are still showing up as stereo channels in the channel strip. i want to be able to set tracks to output to mono channels 5 OR 6, not stereo channel 5-6.

that's what i thought but then i only got it out of the left channel. on second glance i still had my hardware mixer channels panned hard left and right setup for my old card.......oops.
new computer + new interface + new sequencer = utter chaos.

Similar Messages

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels outputing different signals, to sound like the kit has been panned across the stereo field)?

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?

All the Drum Kits available for GarageBand are mixed in stereo.
Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Is it possible to copy all the channel strip info to another Logic project?

Hi
I'm trying to combine two projects so that I can crossfade from one to another yet still have full mix control. I've figured out how to copy the audio files (drag and drop), and that's brilliant, but I'd like to keep all my channel info without having to copy every single strip and rename them. Can anyone shed light on this and save me a couple of hours?
Thanks

Yeah, as Miles says, the track import function might be your best bet - you have to navigate to the files you want - double click on the Project file name to see what's in there and you can bring back your channel strips and the track contents, there are a few options to choose to decide what you want, but that's OK, innit ?
As DataStream says, you can even bring back the Mixer configuration, so that's something else to think about.

I've Lost My Stereo Out Channel Strip

Some how I've lost my stereo out channel strip and can no longer hear my tracks. I see the levels moving when I play. I no longer see the vertical seconds lines in my main work area, nor can I deselect a track by touching the gray background. On the channel viewer on far left at the very bottom is a speaker with red X and "no out" marking. Using Logic Express. What wrong button did I push ? Here is a screen shot http://galleries.tomsalyer.com/picture%201.png Thanks in advance.

Ok, replaced the strip, thanks ! Also, somehow I had managed to unclick the " Input 1-2 " and "Stereo Out" buttons on all six track's channel strips, and once
I fixed those, I now can hear my output again.Don't know how I messed up, but will be careful in future ... they say you can't teach an old photographer new tricks, but am determined to learn audio

Possible to create a new MainStage empty channel strip? (sans Rhodes!)

Is there any way to create a blank new software inst channel strip; i.e. without the EVP88+fx default setting? As it stands I have to use the "Reset Channel Strip" command everytime... totally annoying, especially since creating new channels and resetting them doesn't happen instantaneously.
mitchell sigman

I just tried it and it works fine.
Do this:
- Choose 'Reset Channel Strip' in the Settings popup at the top of a channel strip
- Choose 'Save Channel Strip Setting...' from the same menu and give it a name, like Empty
- In the Channel Strip Settings browser select the strip you just saved
- Use the Set as Default Channel Strip command
I followed these steps and I get an empty strip when I add a new SI strip or create a new patch with an SI strip. I'm assuming that you're resetting the strip to clear the plug-ins then immediately using the Set as Default command. This won't work since you haven't selected it in the settings browser first.

Create New Auxilliary Channel Strip in Logic X ? Taken Away ?

Using create new channel strip setting seems to have been removed or is it a bug ? I took the plunge only to find that a lot has changed in the new DAW. I am particularly distressed that one of the best features on Logic 9 has been removed or just DOES NOT WORK. When this feater used to allow me to create multiple AUX channels with the same BUS or have them ascend or descend. This does not seem to be the case anymore. Is anyone out there having the same issue ? In X it just spits out a channel which it should not do . It should allow you to say how many channels and where you want them routed. This seems like a backwards more for Logic. Very dissapointed.

I've got Core Audio going, and my interface is MOTU 828 mkII. My typical workflow has been with Universal Track Mode (UTM) deactivated. What I have seen is that when UTM is enabled on my sessions, the Aux channels switch from stereo to mono with the fader rotated all the way to the left.
That's what I saw when opening my session under the re-installed Logic, which defaulted to UTM enabled. So, I disabled UTM. But now, when creating new Aux strips, I get mono channels even when requesting stereo channels.
Also - typically, when I enable a bus send on an audio channel, the corresponding bus channel would appear in my Mixer. Now, that's not happening.
Thanks for your feedback thus far, Erik. - j

LP8: "Create New Auxilliary Channel Strips" won't create stereo

I have recently reloaded Logic Pro v8.0.2 onto a newly reformatted drive running OSX 10.5.8. I have opened a previous session, and brought Logic back out of Universal Track Mode. My mix busses had been converted to mono, so I deleted them and am attempting to recreate them. I'm having trouble creating stereo Aux channels to serve as stereo Bus channels. I try:
Mixer > Options > Create New Auxilliary Channel Strips
I choose these options:
Format: Stereo
Input: Bus 3-4 (for example), "Ascending" is checked
Output: Output 1-2
Upon clicking "Create" I get a mono track. In this example, a channel named Aux 3 which will only accept a mono input. I can therefore assign Bus 3 as the input on this Aux channel, but not Bus 3-4. There's no mono or stereo link-rings icon in the lower left of the Aux strip for me to toggle between stereo and mono.
Could someone explain what I'm doing wrong? Happy new year, all. - Jeff

I've got Core Audio going, and my interface is MOTU 828 mkII. My typical workflow has been with Universal Track Mode (UTM) deactivated. What I have seen is that when UTM is enabled on my sessions, the Aux channels switch from stereo to mono with the fader rotated all the way to the left.
That's what I saw when opening my session under the re-installed Logic, which defaulted to UTM enabled. So, I disabled UTM. But now, when creating new Aux strips, I get mono channels even when requesting stereo channels.
Also - typically, when I enable a bus send on an audio channel, the corresponding bus channel would appear in my Mixer. Now, that's not happening.
Thanks for your feedback thus far, Erik. - j

LPX channel strip presets missing (but L9 Legacy strips are showing!)

Hi Guys,
I would be grateful for any advice on something that seems to have gone a little wrong with my LPX installation...
Prior to installing LPX, I removed Logic Pro 9 completely (using instructions from Eriksimon to ensure that all L9-related folders had been removed). I then went ahead and installed LPX, including the "Legacy" downloads to support L9 settings.
I now have a strange situation where the LPX channel strip presets are not showing up in the "Setting" menu found at the top of each channel. However, they are showing up when I show the Library view!
In both views, the L9 "Legacy" settings ARE showing up!
I've taken some screen shots to better illustrate what I am seeing:
1. Here's what I see when I click on the "settings" button of a channel. I've gone into the subsequent menu levels just to show what comes next.
The concern I have is that in that first menu, I am expecting to see the channel strip "categories" for LPX, but all I am seeing there is a single "Legacy" category (containing all the L9 presets:
2. Here's what I see when I click on a channel and then open the Library. When I do this, it appears that all the LPX channel strip categories do show up...
(This suggests to me that the channel strip content for LPX has downloaded successfully, but for some reason it's only appearing in the library, not the settings menu itself)
3. Out of interest, I also tried clicking OPTION+Settings, which I would usually expect to show all strip presets (rather than limiting to track type)... again, when I do this, each of the categories is only offering the "Legacy" content, not the LPX content:
I'm not quite sure what's going wrong.
I am pretty confident that this is not due to the fact that I completely removed L9 before installing LPX - because all the L9 Legacy content is showing up fine, it's the LPX settings that appear only in the Library, and not the channel strip settings menu itself.
If anyone has any thoughts on what's happenening, or a possible way to resolve this, I'd be very grateful!
Cheers,
Mike

Hi all,
I've just had a chance to check out a Friend's installation of LPX - it seems that what I have described above is the way LPX handles presets... rather than showing the categories and sub-categories when you click on the "Settings" button in a channel, this is all now managed within the library.
Hope this is of help to anyone else coming from an earlier version of Logic Pro!
Cheers,
Mike

Send and returns to Auxiliary channel strips

Hi,
Does any body know how to make the Auxiliary channel strips appear on the list of possible output sends for the individual channel strips?
I would like to send a number of channels to a single Auxiliary strip but I cannot figure out how to do so.
Thank you.

THis is part of the messy way Logic uses Auxes and Busses... At least in my opinion.
But the answer is, send all the drum tracks to a bus. Either with a 'send' pot, or by assigning the output of the channels to a buss.
Logic will then create that buss (if it doesn't already exist) AND an AUX with that bus as its input.
So then, from that new AUX (which has all your drums going to it) you can add a send to another buss.
And logic will again create that buss (if need be) AND an aux with the new buss as its input. You can put your reverb or other effects on that new AUX and you're done.
I won't start the whole AUX vs. BUS debate again. Or I'll try not to. But I'm not a fan of the current system. BUT it does work.
Best idea is to create a template with your busses and auxes set up as you like. I've got 8 auxes fed by submix busses (drums, keys, lead vox, backing vox, gits, orchestra, keys, and leads) and then 8 fx auxes (fed by busses 9-18) with various reverbs, delays, etc on'em.
Good luck.

EVP88 Channel Strip for Babylon Sisters?

I'm looking for a EVP88 patch or a Channel Strip with as close as possible Rhodes sound used on Babylon Sisters by Steely Dan....
"Classic Suitcase Mk I" with some adjustments on EQ and chorus comes close, but still lack something. Hard for me to pinpoint what's missing....
Anyone got a customized Channel Strip to share? Thanks.

Having been an owner of a few real Fender Rhodes over my years & considering that Steely Dan used the real thing on that Gaucho album, the EVP88 is just eh' ok & sort of sterile in comparison. What I don't think you'll get out of the EVP88, is that "spank" or "bite" character that a real Rhodes with real steel tines has when you wack the keys.
The Babylon Sister Rhodes sounds like a slow stereo phaser was possibly used, as well as a slow tremlo L.R. panning. Sounds like Fagen used an 88key suitcase model on Gaucho.
There are other 3rd party sample libraries out there specifically dedicated to the Fender Rhodes, that will come much closer to the real thing, than the EVP88 can do.. of which isn't even sample based, but a physical model plug. A real high quality Rhodes sample based library will come much closer to the real thing, than a physical model plug such as the EVP88.

Forcing mono out

I have a Audigy 2 zs platinum pro. Is there any easy way to force it to ouput mono sound to the spdif? i.e Left channel -> both channel or right channel ->both channel?

Trackstarr,
I do not know what the problem is on your system. Here is what I just did:
1. I chose a bounce Output and yes the choices are all stereo so I clicked on the double circle (stereo) to change is to a single circle (mono).
2. I clicked on the word "Bnce" on the channel strip and it opened the dialog box. Where before there were stereo choices now it is grayed out implying that it is mono.
3. I bounced the file and looked at it on the Audio Window and sure enough it is mono.

Odd stuff - recording delay - automatic channel Strip changes

Recently I upgraded my interface from a MOTU 828MKII, to a Metric Halo 2882. I also upgraded from Logic 8 to 9. The problem is, I did this in the middle of a project. This project was/is just a test of a whole new upgrade to my home studio including some preamps/mics/interface/acoustic treatment/etc. Up to this point I mainly recorded my own stuff (5yrs), no big deal. But I'm thinking of moving this into a part time gig. So I asked a some friends if they'd be interested in free recording as guinea pigs.
The first day (Saturday) we tracked drums into the MOTU on Logic 8, as my Metric Halo interface hadn't arrived yet. Everything went good. That Monday, my Metric Halo arrived. I switched out the MOTU, and had the 2882 up and running by Wednesday. Thursday, I installed Logic 9 and updated to 9.1. I had all weekend to work though some of the new stuff, and it all sounded good.
By Monday I had the guitar/singer come by to lay down the rhythm guitar. When we recorded it, with the same settings as in the previous session, although with Logic 8 and a Motu interface, the guitar was around 246 samples late. I adjusted the Recording Delay ahead 246 samples, and it made it slower. I adjusted back 246, still not right. So we called the session.
I've scoured forums, and the only info I can find is plugin latency, and I/O buffer settings. I never had any issue with the MOTU as far as recording delay goes. I had latency issues, but nothing that actually recorded. It was my understanding that, the I/O buffer only affects the monitoring latency, everything "goes to tape" correctly though. I've spent the last 4-5 days trying to figure this out. If I start a new project with the 2882, everything syncs up great, no delay at all. But if I try to add to any project that was started with the MOTU, and Logic 8, I get a recorded delay.
The frustrating part of this is, last night, I updated Logic to 9.1.1, and recorded a loopback click. It worked fine. No delay at all. I tested a bass through the same recording chain I used before, and it was perfect too. I'm not sure if this was a fix in the new update, or I have some other instability thing going on. Any Ideas there?
Also, after updating last night I had a weird problem with plugins that were disabled, suddenly re-engaging. It seemed as though when I would do any changes in the MIO Console, I would come back to Logic, and random plugins would be re-enabled. I'll check tonight if this is repeatable, but last night it was a bother. I also had a Focusrite LiquiMix running at the same time. Maybe this was causing a problem. It did seem to only affect the channel strips that the LiquidMix inserts were on.
Thanks,
Erik

Thanks very much; I'm still perplexed though. You're right, the "mono->stereo" plug-ins yield stereo effects for the guitar; but I'm referring to the pre-assembled "sets" of plug-ins that are accessed by clicking on the word "inserts" (above the various slots for plug-ins). When you click on this word, all sorts of effects-sets are offered: for drums, vocals, pianos, guitars, etc. I'm referring to one for "electric guitar" (under "distorted guitar") called "Angus on SG + MS 1959" (though this is true of the other effects in this same category for electric guitar). Here's why things don't make sense to me: 1) since this effects-set ("Angus...") works just fine if it's applied AFTER I've recorded the guitar dry, why should it NOT work when I'm recording with the effect? I.e., I don't need a special double guitar plug for my Firepod for the effect to work on the signal it HAS recorded; so why should the special double plug be necessary WHILE recording? Meanwhile, 2) given that this is a GUITAR effect (Angus Young playing his Gibson SG through a 1959 Marshall Stack), and guitars always have mono output, then how can it be that Logic, by design, should require users to buy a special stereo plug when using effect-sets specifically designed for guitar? .... That's why I'm perplexed. I do think your two suggestions will work; but it just seems impossible to me that Logic is actually designed to work in this way -- at least not on purpose. On the other hand, I'm a newbie, and I may be missing something that's obvious. Sure would appreciate hearing whether it seems to people that there's a problem with my set-up (or with Logic), or whether the physical stereo-plug solution is actually a well-known practice that I am simply not familiar with. Many thanks!
You have recorded only one chanel on a stereo track.
Use a second input on your firepod or use mono ->
stereo plugins on a mono track to hear them in stereo.
dual g5 Mac OS X (10.4.4)

Apple midi loops load incorect channel strip

when i preview a midi apple loop in the loop browser it sounds fine, but when i drag it onto an inst. channel it loads up all the wrong channel strip info. it will load the Garage band sampler but the correct samples do not load. I have used Redmatica's EXS manager and the Inst. are connected to the correct samples, and still no luck. even if i go into the EXS24 and try to load the Garage band Inst it does nothing (not even a warning saying it cant find samples) it stays unloaded. this has mainly been the drums from jam pack 2. I have reinstalled them twice. initialized my drive and reinstalled everything .
has anyone experienced something like this?

Good question with a complex answer. Let's say you have three synths you want to layer together, EXS24, ES1 and ES2. On one of those tracks in your arrange window, drop in your midi arrangement, for this example we'll say it's the EXS24. You'll notice a "plug" on the top right corner of the channel strips. Locate the plug on the EXS 24, click + hold and drag this plug to the ES1. Now repeat the process for the ES1 to the ES2. You have now changed all the instruments together, and they will respond to the the midi input from the base synth, i.e. the EXS 24.
To make this easier, it may help you to create a new layer in the environment window and then place the channel strips for those instruments on this layer. This will keep things organized for your workflow, but it's entirely optional. Hope this helps. Check out macprovideo.com for more environment + midi tricks.

Write Channel Closed, possible SSL handshaking or trust failure

Hi,
I Have a problem while working with Two-way SSL. I get Write Channel Closed, possible
SSL handshaking or trust failure error while contacting the server for invoking
a webservice secured by SSL.
I could figure out that the error is happening on client side while validating
the server certificate.
One more observation that i was able to find is, it works fine if the Server certificate
and the client certificate are signed by the same (root) CA.
I tried various options but couldn't find my luck. The BEA documentation in this
regards is not at all sufficient.
If i give strict checking false on my client end, the application works fine.
But for my scenario i want strict checking to be happend (otherwise there is no
point in going for SSL itself).
I am using WLSSLAdapter on my client side. The client application is a standalone
java class running out of weblogic (ideally running on JRun).
The way i have coded in my java class is:
String certificatePath = "C:/Cerificates/cert.pem";
          String caCertificatePath = "C:/Cerificates/clientca.pem";
          String targetURL = "https://localhost:443/feedservice/FeedService";
          //set weblogic ServiceFactory
          System.setProperty( "javax.xml.rpc.ServiceFactory",
          "weblogic.webservice.core.rpc.ServiceFactoryImpl" );
          System.setProperty("java.protocol.handler.pkgs","com.certicom.net.ssl");
          System.setProperty("https.cipherSuites","SHA1withRSA,MD5withRSA");
          SSLAdapterFactory sslFactory = SSLAdapterFactory.getDefaultFactory();
          WLSSLAdapter adapter = (WLSSLAdapter) sslFactory.getSSLAdapter();
          adapter.setProtocolVersion("SSL3");
          adapter.setStrictChecking(true);
          adapter.setVerbose(true);
          FileInputStream clientCredentialFile = new FileInputStream (certificatePath);
          String pwd = "password";
          System.out.println("Loding Certificate from ........"+certificatePath);
          adapter.loadLocalIdentity(clientCredentialFile, pwd.toCharArray());
          System.out.println("Loding CA Certificate from ........"+caCertificatePath);
          adapter.setTrustedCertificatesFile(caCertificatePath);
          // optionally set the Adapter factory to use this instance always.
          sslFactory.setDefaultAdapter(adapter);
          sslFactory.setUseDefaultAdapter(true);
          // Webservice invocation code..
          call.setTargetEndpointAddress(targetURL);
          call.setProperty("weblogic.webservice.client.ssladapter",adapter);
          Object result = call.invoke(new Object[]{"test.xml"});
The error that i get :
java.io.IOException: Write Channel Closed, possible SSL handshaking or trust failure
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown
Source)
at com.certicom.tls.record.ReadHandler.interpretContent(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown
Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown
Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:67)
at java.io.BufferedOutputStream.write(BufferedOutputStream.java:106)
at java.io.FilterOutputStream.write(FilterOutputStream.java:78)
at weblogic.webservice.binding.soap.HttpClientBinding.writeToStream(HttpClientBinding.java:359)
at weblogic.webservice.binding.soap.HttpClientBinding.send(HttpClientBinding.java:284)
at weblogic.webservice.core.handler.ClientHandler.handleRequest(ClientHandler.java:34)
at weblogic.webservice.core.HandlerChain.handleRequest(HandlerChain.java:131)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:421)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:363)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:423)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:292)
at com.chase.userspace.aceclient.Client.main(Client.java:253)
Exception in handler's handleRequest().
Exception in thread "main" javax.xml.rpc.soap.SOAPFaultException: Write Channel
Closed, possible SSL handshaking or trust fail
ure
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:479)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:363)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:423)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:292)
at com.chase.userspace.aceclient.Client.main(Client.java:253)
Can someone give the working phone number of ....BEA CUSTOMER SUPPORT...

The signature validation failure means your trusted CA certificate is not the issuer
of the identity certificate. The identity certificate issuer name can match to
the trusted CA certificate name, but the signature check really determines whether
it is the issuer.
Pavel.
"Chandra Sekhar Rao" <[email protected]> wrote:
>
Hi payal,
I have the issuer of the server identity certificate in the trust file
on client
side. The problem is with signature validation
"Pavel" <[email protected]> wrote:
It looks like your client does not trust the server certificate. Make
sure the
certificate you pass in adapter.setTrustedCertificatesFile(caCertificatePath);
is the issuer of the server's identity certificate.
Pavel.
"Chandra Sekhar Rao" <[email protected]> wrote:
Hi,
I Have a problem while working with Two-way SSL. I get Write Channel
Closed, possible
SSL handshaking or trust failure error while contacting the server
for
invoking
a webservice secured by SSL.
I could figure out that the error is happening on client side whilevalidating
the server certificate.
One more observation that i was able to find is, it works fine if the
Server certificate
and the client certificate are signed by the same (root) CA.
I tried various options but couldn't find my luck. The BEA documentation
in this
regards is not at all sufficient.
If i give strict checking false on my client end, the application works
fine.
But for my scenario i want strict checking to be happend (otherwisethere
is no
point in going for SSL itself).
I am using WLSSLAdapter on my client side. The client application is
a standalone
java class running out of weblogic (ideally running on JRun).
The way i have coded in my java class is:
String certificatePath = "C:/Cerificates/cert.pem";
          String caCertificatePath = "C:/Cerificates/clientca.pem";
          String targetURL = "https://localhost:443/feedservice/FeedService";
          //set weblogic ServiceFactory
          System.setProperty( "javax.xml.rpc.ServiceFactory",
          "weblogic.webservice.core.rpc.ServiceFactoryImpl" );
          System.setProperty("java.protocol.handler.pkgs","com.certicom.net.ssl");
          System.setProperty("https.cipherSuites","SHA1withRSA,MD5withRSA");
          SSLAdapterFactory sslFactory = SSLAdapterFactory.getDefaultFactory();
          WLSSLAdapter adapter = (WLSSLAdapter) sslFactory.getSSLAdapter();
          adapter.setProtocolVersion("SSL3");
          adapter.setStrictChecking(true);
          adapter.setVerbose(true);
          FileInputStream clientCredentialFile = new FileInputStream (certificatePath);
          String pwd = "password";
          System.out.println("Loding Certificate from ........"+certificatePath);
          adapter.loadLocalIdentity(clientCredentialFile, pwd.toCharArray());
          System.out.println("Loding CA Certificate from ........"+caCertificatePath);
          adapter.setTrustedCertificatesFile(caCertificatePath);
          // optionally set the Adapter factory to use this instance always.
          sslFactory.setDefaultAdapter(adapter);
          sslFactory.setUseDefaultAdapter(true);
          // Webservice invocation code..
          call.setTargetEndpointAddress(targetURL);
          call.setProperty("weblogic.webservice.client.ssladapter",adapter);
          Object result = call.invoke(new Object[]{"test.xml"});
The error that i get :
java.io.IOException: Write Channel Closed, possible SSL handshakingor
trust failure
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown
Source)
at com.certicom.tls.record.ReadHandler.interpretContent(Unknown
Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown
Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown
Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:67)
at java.io.BufferedOutputStream.write(BufferedOutputStream.java:106)
at java.io.FilterOutputStream.write(FilterOutputStream.java:78)
at weblogic.webservice.binding.soap.HttpClientBinding.writeToStream(HttpClientBinding.java:359)
at weblogic.webservice.binding.soap.HttpClientBinding.send(HttpClientBinding.java:284)
at weblogic.webservice.core.handler.ClientHandler.handleRequest(ClientHandler.java:34)
at weblogic.webservice.core.HandlerChain.handleRequest(HandlerChain.java:131)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:421)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:363)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:423)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:292)
at com.chase.userspace.aceclient.Client.main(Client.java:253)
Exception in handler's handleRequest().
Exception in thread "main" javax.xml.rpc.soap.SOAPFaultException: Write
Channel
Closed, possible SSL handshaking or trust fail
ure
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:479)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:363)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:423)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:292)
at com.chase.userspace.aceclient.Client.main(Client.java:253)
Can someone give the working phone number of ....BEA CUSTOMER SUPPORT...

All of a sudden, I can no longer add any plugins to any channel strips? And when I click on an existing plugin to edit, it disappears off the channel strip?

I am running Logic express 9 on a 2008 Macbook, (non pro). Anyhow, logic has always seemed to work great for me. However, last week I opened up one of many existing projects, (I'm in sample editor). When I went to add a new plugin to one of the channel strips it would not allow me to. Also, if I click on any plugin that already exists on the channel strip it dissapears? The strange thing that also happens weather I click to add a new plugin or click on an already existing plugin, is both the "repeat section" and "crop", buttons from the above menu (in sample editor), the actual buttons become a faded image,(as far as the actual font and images of the buttons). As soon as I am done clicking to add a plugin on the channel strip, both buttons from the menu go back to looking normal like all of the other choices from that menu? I really don't get it? All I want to do is to be able to add plugins as well as edit or change plugins again. Any thoughts as to why I can no longer add any new plugins to any channel strips? And why any existing plugins disappear from the channel strip when I click on it? Why the "repeat section", and "Crop", buttons from the menu above fade in and out when I try clicking on the channel strip is very strange? I don't mind that I just want to be able to add or edit plugins again. I did do some document cleaning up last week as my memory was getting low. I then emptied out my trash bin. I'm hoping I didn't accidentally delete some kind of Logic component? Why can't I add or edit plugins anymore? Anyone ever run across this?
Thanks,
Mike.

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

Mono outs in channel strip possible?

Similar Messages

Maybe you are looking for