Mono sound issue

Hi there,
I made this video last week and spent all weekend editing it in FCP X, which I am completely new to.
I found out after exporting it, that I only had sound in the left channel becuase I have external soundrecording. Because I am new at this, I have later made my entire clip into a compund clip (maybe a newbie mistake?)  and therefore it seems like that I cannot go into the audio - channel config. and change it.
What can I do to get audio in both channels on my clip ?
Hope you can help. Thx

Hi
Why not ask in FCP-X forum.
In FCE/P - You have stereo pairs of audio and if one is silent a poor solution is to copy over the other to a x2 mono track.
Yours Bengt W

Similar Messages

  • Seek to a particular location for MONO sounds not working in AS3

    Hi Guys,
    I am facing an issue seeking to a particular location for
    MONO sounds with sample rate 22KHz. Another thing I observed was
    that there is a problem seeking to positions greater than half the
    total length of the actual sound, otherwise it is working fine. I
    have been trying to test this in a browser.
    Any ideas or thoughts will really help me.
    Cheers,
    TarXXXXX

    I am not streaming the sound from FMS, it is normal
    progressive download with audios placed local alongside my swf
    file. It works fine for 44 KHz sounds.

  • My balance sounds horrible when is at the center ... it only happen when I plug my Headphones... if a move the balance to the left/right i have a mono sound in my headphonesleft/right

    My balance sounds horrible when is at the center ... it only happen when I plug my Headphones... if I move the balance to the left/right i have a mono sound in my headphones left/right

    I too am experiencing this issue after upgrading to Mavericks. Headphone audio balance seems to always stick to the far right. When moved to the center, it still only outputs sound to the right side. I have to constantly adjust the setting a little to the left of center for both sides to output sound equally.

  • Mono Sound

    Hello guys. Interesting problem today, all of a sudden on my way home from work the left speaker on my headset went poof. I figured the headset broke suddenly. So I arrived home to try them on my old iphone but alas they worked. So I tried the headset that came with my original iphone on my new iphone 3g and there is no sound from the left channel. I performed a reset on the 3g phone and tried it again, nothing. I have even performed a reset on the 3g iphone and the issue persist. I have not yet even dropped the phone and this happens? I also have tried reinserting the headset several times like on the original iphone to try to get it to work but alas, nothing. So for now this new phone is in mono sound. This issue is with all operations such as ipod feature and phone feature.

    I have the same problem on a iPhone 2G with 2.1. No sound in the left channel when using headset. I have tried many different headsets but problem remains.
    I have tried restarting the phone, changing the settings back and forth, and plugging headset in and out many times.
    I have not yet tried to reset the iphone, but i will have to try that soon if i don't find a better solution.

  • HP Envy 4-1215dx Sound Issues

    Hi, I own an HP Envy 4-1215dx. It's a great unit overall, but I am having problems with the audio on it. From the day I took it out of the box it will randomly spew out quick bursts of buzzing/crackling/digital noise whenever I try and play some sort of media, it will appear to have stopped for a while but then start doing it again, it is quite intermitten. It does it with sound from the internet such as youtube, playing MP3's, and even in Games. It is extremely irritating and I need to find a solution. I have already uninstalled and reinstalled the audio drivers and have had no luck. Doing a quick google search, I found out that there are several other people with the same problem, yet the only answer they get back is to reinstall the drivers. I have done this already and it does not fix the problem. Any help would be appreciated.
    Thanks!

    Hello Livingedge,
    I understand that the driver is an older version. This is the version that is available for your specific product on the HP Driver & Software page. I have been able to locate a driver that is also IDT, but the release date is 2013-09-30. I have included that driver here for you 'IDT High-Definition (HD) Audio Driver'.
    If this driver fails to resolve the sound issue, I would keep an eye on the 'HP Driver & Software' page. This is where if and any updates are available, will be provided here.
    Thank you.
    I worked on behalf of HP

  • Strange sound issue on iPad2

    my mom is having odd sound issues on her iPad 2 that i was able to somewhat fix. and it goes from fixed back to broken o.O
    i thought it was interesting and worth mentioning, in case this happens to anyone else.
    her iPad 2 is up to date on the latest iOS (5.0.1) and the issue occured while she was watching a video in YouTube. sound is totally off in all apps. in Settings>General under 'use side switch to' it is set to 'mute'. when going to Settings>General>Sounds the volume control for ringers will work and cause the ringtone to play, so it seems the speaker itself is fine. however it will only work there and for that short time. afterward sound will continue to remain off. the volume control on the side of the unit will bring up the on screen speaker icon, except it doesnt show the bar that usually goes up and down with the volume. and sometimes at the top of the grey box it will say 'sound effects'. ive also tried switching the mute on and off which changes nothing.
    the one thing ive found that changes anything is the multi tasking bar volume control (double clicking the home button and then sliding all the way to the left, where it shows a screen orientation lock, brightness slider and a volume control bar). now the volume control bar is unfilled and doesnt show the dot that you can slide up and down to change the volume. however when i plug the iPad 2 into a computer (any computer seems to cause this) the volume control bar will suddenly fill and the dot will appear. now suddenly sound works in all apps and will change with the side control again as normal.
    now heres where it gets even weirder!!!
    sometimes when unplugging the iPad 2, after a short while volume will slowly fade out and be unresponsive again. the side buttons stop working and the volume control in the multi tasking bar will be unfilled and unresponsive. repeatedly plugging it in, going back to the multi tasking bar volume control and unplugging will eventually bring volume back. a couple times ive gotten volume to stay on and the volume bar to stay responsive by unplugging it while im in the multi tasking bar. but sometimes this is not the case.
    for the record, ive tried 'turning it off and on again' and resetting all settings and erasing all content and settings (both with starting up from a back up on iCloud and PC, and starting up as a new iPad). ive used two different laptops, one with Windows Vista and one with Windows 7. the iPad is synced with one laptop but aside from using iTunes to back it up and for charging, ive not made any changes to the iPad using these devices. during the entire duration of my attempts to fix it, the iPad has been on no lower than 80% power. ive also called Apple and discussed this with an Apple Care representative. who suggested all the same things id already done, and walked me through all the fixes to make sure i didnt skip anything.
    hopefully and most probable is that its just an issue with iOS 5.0.1. i also have an iPad 2 thats up to date with 5.0.1 and ive not had this issue, YET.
    i just thought it would be beneficial to the community to share this issue and get word out that this is happening. i would like to hear everyones thoughts on this issue and if this has happened to anyone else. the Apple Representative that i spoke to had not heard of or had to deal with this issue so it sounds like its rather new or rare. though she did mention that this is not normal behavior for the device and might be a software issue.
    id like to conclude with my love for Apple, and how user friendly iDevices are in general. ive had iPods from the very first generation and all of them still work (though the older ones cant be updated past a certain iOS). the few issues ive ever had were easily fixed with a visit to the Apple Store or searching on the Apple Support Communities. so as with before, i will remain positive and look forward to a bug fix in the next update.
    -thanks in advanced for reading, and any comments
    Paper_Dragon

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Sound issue on iphone 4 - 7.1.1

    My mom has an iphone 4 that was handed down to her from my sister.  After one of the ios updates...can't remember which one...the phone stopped giving audible notifications for text messages.  As I have tried to troubleshoot this issue I have discovered the other following problems:
    The phone will not play music on any speaker.  I was trying to connect the phone via bluetooth to a speaker bar and when I tried to play pandora, I got nothing.  I then disconnected the bluetooth to see if I would get sound out of the phone's speaker and got nothing.  I attempted to play a downloaded song and got nothing.
    I then tried to see if I could find other issues and I did.  When I go into settings>sounds>ringtones I can switch ringtones and hear the ringtone sample.  When I go into settings>sounds>text tone, I can select any tone in the list and all I get is a vibration, no sound at all from any of them.
    I also found that when pressing the volume up and down buttons on the side of the phone do not produce the pop up box that shows volume going up and down
    I believe these three problems to be related as some kind of systematic software bug.  Can anyone confirm this or offer a possible solution. Keep in mind the phone does make sounds when someone calls also from the speaker phone.  The only non-sound issues are text notifications and playing music.  I find this to be a rather important problem because the phone can really no longer be used as a phone since my mom continually misses text messages because she does not get an audible notification.

    Hello hiknmt06,
    You may need to restart or reset the device.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Should the behavior continue, it may be necessary to restore your iPhone.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • Windows Vista major sound issues

    On my 2 month old Unibody Macbook, I'm experiencing severe sound issues with bootcamp 2.1 in windows vista. While playing games such as Halo 2 or Fallout 3, which the macbook graphically handles exceptionally well for a laptop, the sound crackles and often disappears! To get the sound back I have to reboot my macbook. Help, this is extremely annoying, and apple won't do a thing about it!!! Please help!

    try what I posted here and report back
    http://discussions.apple.com/thread.jspa?messageID=9071165&#9071165

  • Sound issues with MacBook Pro

    I am experiencing sound issues with my MacBook Pro. I am using a headset and when I am on a skype calsl I have a hard time hearing the other person, the sound is coming in and out and sounds digitized. This issue only started recently, the sound had been working fine for years before this issue.

    I do not use Skype, but may be  information from the  below linked article helpful.
    https://support.skype.com/en-us/faq/FA10992/Why-can-t-I-hear-the-other-person-in -Skype-for-Mac-OS-X
    Best.

  • Sound issues in iOS6

    I'm having random sound issues since upgrading iPhone to iOS6. For instance, after using iMessage I will sleep the phone without exiting iMessage. 5 mins later I will have messages sent to me but there were no sound notifications indicating such. Only if I exit iMessage prior to sleeping the phone will I hear notifications of new texts or iMessages.   Also, random sounds like the swoosh when sending an email will mute randomly. I have to shut the phone off and restart before it works again.    Why is this happening?

    If you have a iMessage open and into a message, normally it will not sound.  I think it is because you already have it open and in it.  That is what I have noticed.

  • What is a packet problem? I'm having sound issues.

    I'm at my wit's end. I am having sound issues. I've run diagnostic tests and everything comes back as OK, but it's not OK! Something somewhere is messed up and I can't figure it out.
    I have been to the help rooms on paltlak and opened up support tickets and everything they told me to try has not helped. They suggested I change the sound tuning on my chat program, change exceptions on my firewall, uninstall and reinstall chat program, uninstall and install earlier version, download drivers for sound card, and etc. Nothing is helping this problem.
    Someone mentioned that it may be router problems or packet problems. I'm not sure what that means, and that is why I'm on this forum asking for help. I have no other sound problems on my computer. My music and videos play fine. It's just when I'm in a voice enabled chat, do I experience these problems, or if I'm on a website that has videos, the video will not load all the way, so I only get 30 seconds of a video. Does anyone know what could be causing this?
    I have used this chat service for over 5 years and up until a week or so ago, it worked fine. I did a complete reformat of my computer in hopes that it would help, but I'm still having the same problems. I lose sound within 5 seconds of entering the chat room. Then it takes between 3-5 minutes before I hear sound again, but then I only hear it for a few seconds. Then it goes away for another few minutes. Repeat. Over and over again.
    I'm running Windows Vista on an Acer Aspire 380 with wireless cable modem. I keep losing sound in any voice/sound enabled chat and on any site that has videos. I have 1gig of ram, 300 gb hard drive, 32 bit operating system, 2 processor cores, directx version 9, realtek sound card. Everything is up to date, and firmware is up to date. My speed test is: download: 6.162 mbps and upload: 926 kbps.
    When I do the ipconfig/all, it shows
    Tunnel adapter local aera connection* 6: Media State: Media disconnected
    description: teredo tunneling pseudo-interface
    dhcp enabled: no
    autoconfiguration enabled: yes
    I don't know if this has anything to do with my sound issues on the chat program or not. ??
    Also shows:
    node type: hybrid
    dhcp enabled: yes
    autoconfiguration enabled: yes
    default gateway: 192.168.1.1
    dhcp server: 192.168.1.1
    netbios over tcpip: enabled
    If by chance it is a packet problem, how do I fix that?

    Hi. Thanks for the quick reply. Yes, it just started recently and after not being able to fix the problem, I completely reformatted my computer and started with a fresh slate, but still having the same problems. The videos will not continue to load. They get less than half way and then just totally stop loading, therefore I only get to view the video up to the point where it stops loading. I just took your advice and I disconnected the router and connected my computer directly to the modem and my sound issues were fixed. I went into the voice chat and had sound for over 10 minutes (and then I disconnected) instead of the usual 5 seconds that it'd been. So is it the linksys that is causing this? If so, how can I fix it? Thank-you. Message Edited by nightrider7000 on 01-22-2008 11:34 AM
    Message Edited by nightrider7000 on 01-22-2008 12:44 PM

  • I am having sound issues with Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmated. I can hear samples of audio books in the store section.  Any ideas?

    I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section.  Any ideas? I have reset Safari.  Website works fine on Firefox.

    I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section.  Any ideas? I have reset Safari.  Website works fine on Firefox.

  • Mono sound only

    This is a really annoying problem: I only get mono sound with my headphone jack - the builtin laptop speakers are doing fine, though. I had this problem a few days ago, I asked for help in another forum but right after that (after a reboot) it worked again. After I used jack server for a while I noticed that there was mono sound only again, system-wide, and it couldn't be fixed with a reboot. I think I should mention that I had the same problem on ubuntu before (about 5 days ago; installed arch linux afterwards) too.
    (i don't know how to use code tags yet, sorry)
    [alexander@alexander-p6634 ~]$ LANG=C aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: CX20585 Analog [CX20585 Analog]
      Subdevices: 0/1
      Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 1: CX20585 Digital [CX20585 Digital]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    [alexander@alexander-p6634 ~]$ dmesg | grep sound
    [    6.822506] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [    6.822649] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [    6.822787] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [alexander@alexander-p6634 ~]$ dmesg | grep snd_
    [    6.576589] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [alexander@alexander-p6634 ~]$ lsmod | grep snd_
    snd_hda_codec_hdmi     29298  1
    snd_hda_codec_conexant    36191  1
    snd_hda_intel          35816  6
    snd_hda_codec         145920  3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
    snd_hwdep               6364  1 snd_hda_codec
    snd_pcm                76860  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc          7330  2 snd_pcm,snd_hda_intel
    snd_timer              18687  1 snd_pcm
    snd                    58893  18 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
    Maybe it will be gone when I'll do some reboots, there are often problems without any cause (that makes sense, at least; today my laptop died for 3 hours, i couldn't turn it on anymore, and when i took it to a repair service, when i explained it to the guy he tried pressing the power button and it just worked again)

    It went away for a while and came back right now, I don't know how to reproduce it, I don't know the cause. This is really bothersome.
    The built-in speakers work normally, by the way.

  • Mono sound unchecking itself after reboot

    Hello all,
    I primarily use headphones for sound and as I have near-total hearing loss on one side I use the mono sound option in Universal Access. Every time I reboot my Mac the setting undoes itself and I have to go back into preferences and recheck it. Is there anything I can do to lock that setting into place?
    Thanks.

    Try trashing the file ~/Library/Preferences/com.apple.universalaccess.plist (when System Preferences is not active, of course), then resetting your Universal Access preferences.
    Good luck!
    Archie

  • Macbook sound issue after standby

    Hello,
    Bit random issue here..
    This is not consistence but it is totally random. Randomly when i open the macbook lid when it comes out off standby by i hear a weird "ripping" sound issue i think its coming from left hand speaker or side. Im assuming its the speaker.
    Its hard to explain its starts with a weird fuzzyness and then it turns into a rip type sound and stops.
    It last about 2 seconds and is random and only happens after putting up lid.
    Is this normal? any ideas?
    thanks

    Upgrade kernel to 3.1.5 still not fix the sound issue
    On 12/14, I upgraded    imagemagick, pcre, texinfo, virtualbox-modules, wxgtk with `pacman -Syu`,
    after reboot, the sound comes back, everything works fine just like before
    But on 12/16, I lost the sound again, only found these line in kernel.org
    Dec 16 09:28:29 localhost kernel: [75508.452468] ice1724: Too long irq loop, status = 0xff
    Dec 16 09:28:29 localhost kernel: [75508.452468] ice1724: Disabling MPU_TX
    no matter how I tried to reproduce the upgrade on 12/14, still unable to fix the
    issue, and those warning didn't show up again, I also boot into live USB to check
    if this is hardware problem, but sound works normal in live USB
    it's so weird...

Maybe you are looking for