Mono vs. stereo, answer to random resets?

i read elsewhere on the forums that if you have mono recorded songs it causes you ipod to crash. this is the problem im currently having, where it crashes randomnly as its shuffling through songs.
so how can i determine which songs are mono so i can get rid of them and see if this fixes my problem?

Honestly, it doesn't matter whether the song is mono or stereo for whether it will play or not, just to how it sounds. Is it just certain songs or does it do it completely randomly? If it is certain songs, then you have to remove those songs and reformat them so they are in a proper format. If it isn't that particular ones, then you have a corrupt iPod Control file on your iPod and you'll have to do a reformat. If you don't want to lose all your music because you don't have proper backups of it, there are a few ways around it. But before I get into that, let me know what you discover about which songs it is.

Similar Messages

IPod and JVC Car Stereo random resetting problem

Hey all,
I recently bought my first iPod (yay!), a 30gig 5th generation. I also had a JVC KD-PDR30 cd player installed in my car so that I could hook up the iPod to it and eliminate all the random cds cluttering up my vehicle. It works great -- most of the time... the last few days I've my iPod has been randomly resetting itself while connected to the car stereo -- it's connected through the dock port (not the headphone jack) and works 90% of the time. Even still, this is frustrating. I almost want to just connect it from the headphone jack to the aux in on the car stereo. Anyway, it only seems to do this while it is connected to the car stereo. I've never had a problem with the iPod resetting while using it outside of the car. Anyone have any suggestions? Thanks Apple community!!!
Theo

I had the JVC radio with iPod connector which worked just fine for my old iPod. When I upgraded to the iTouch I had to put in a new JVC stereo. The old version does not work with the iTouch (the same issues prev. stated). The new stereo has an USB hookup on the front. It plays the iTouch, but occas. the song or book will skip. At first I thought it was when I turned corners, but realized it was just random. A bit annoying. I looked at other stereos, but I could not get the iTouch and Sirus in the same unit, except for the JVC. If you can live without your iTouch I would wait until JVC or Apple address this issue. I could not live without either (I hate commercials!), so I made the jump to the first generation. I know better.

Random switching between mono and stereo sound on t400s

i just found out one problem on my t400s, it randomly alters between mono and stereo sounds. any idea why that happens? i'm using win7 enterprise x64, with all the latest drivers installed (i.e. no beta drivers).
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

This issue seems to be similar to the "T410 Extremely Annoying Audio Issues" thread, have you tried potential solutions there? (Can't summarize it because I haven't read the thread.)
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Lumia 720 : mono or stereo?

I have Lumia 720. Here's my problem. When I plugged my headset, the output seemed to be mono, not stereo. I checked with the same headset and the same song on my pc and the output was stereo. Another audio setting on my lumia are working properly, like the equalizer and dolby experience. Is my lumia getting a problem here?
Solved!
Go to Solution.

hi mate, have you checked that you are fully up to date with the latest firmware for your device, and that you have all the latest Nokia system app updates from the Store? also check that you are pushing the earphones all the way into the headset jack on the phone properly, and try performing a soft reset.

HELP!!! iPhone randomly reset and now it won't detect SIM card?

Ok so here's what I was doing when this all happened.
I had called the Linksys support for a new router I just bought that wasn't working right. After waiting about 8 mins I was connected to a gentlmen in India, we worked on my problem for about 10mins or so and then all of sudden my phone just reset, or at least went to the apple logo and just sat there.
then after 30 seconds it started ringing (before it fully restarted) and it was the tech gentlemen call me back. So I slide the thing to answer and the screen froze with the slider on the right but not unlocked but I could see the time and my back ground, just no buttons and I could still hear him and talk to him.
After we fix my problem with the router he hung up, but my phone was still froze and then it started ringing (a friend had tried to call me before it reset while I was on the phone so I assume it was him again). I couldn't answer and it just kept ringing and ringing so I held the wake button and slide the red slider to shut it off.
Left it off for 30 seconds or so then press and held it again to turn it on. Now it says restore need, connect to itunes!
ok, so I did and after wait about 30sec to a minute after connecting it to itunes it comes up with this error:
*"iTunes cannot activate your iPhone because the SIM card is not inserted or a SIM PIN is required. Disconnect your iPhone, make sure the SIM card is inserted correctly and, if you use a SIM PIN, tap Unlock to enter it, and then reconnect your iPhone."*
What the heck?! I've had it randomly reset once before about a month and a half ago and which point I did have to restore, and it did and it worked fine after that.
The SIM card IS in there, and I have no idea what my SIM PIN would be, nor do I see the option for it they speak of! And this happened about 9:30pm, well after any Apple or AT&T stores are closed! I even turned off the phone, took the SIM card out and put it back and it still did the same thing!
What would cause this to randomly just mess-up like this? I loved this phone when I got it but now that this is the 2nd time this has happened and much worse I'm pretty ticked about it. And it's not like I hacked it or unlocked it or whatever that is even called, the only things I've put on my iphone are music, pictures, and programs I all got thru itunes!
PLEASE HELP!

Hi Guys,
I'm writing this from the UK. Got an iPhone 3G bought a few weeks ago and activated (no jailbreak or other stuff)it. It worked fine but last night it gave the same error as originally reported in this thread.
Went into the O2 store (this is the provider selling iPhones in the UK) and they told me is the SIM card. Got a new one but still the same...
There is something going on here because I've seen lots of claims with the exact same description. Its almost like there is a bug in the software that gets activated on the 3rd of January.
Will go tomorrow again and ask for a new phone.

Change Mixdown from Mono to Stereo

I'm sorry if this has come up previously but I coudn't find anything that exactly related to my situation.
First let me say I bought CS5.5 about two years ago and after trying it a few times, I found I did not like all the "missing functions like Group Tracks and the fact that it seemed to work slower than my old 1.5.
Recently I decided to give it another try and be patient. I had to assembe two VOs with SFX and various production music beds. When I was happy with the mix, I was ready to do a mixdown...only to discover that my mixdown was in Mono. Mono? I tried to find where to convert it to stereo. After searching help and then this forum, it appears that there is no way to choose Strero or Momo....except apparently only when initially naming the Multitrack session. SAY IT AIN'T SO!!! Does this mean I have to start all over with a new session file and spend all that time again? If this is so, WHY would they remove the option to mixdown in Mono OR Stereo which seem so common sense and was an option in previous Audition versions. I never understood software developers who seem to want to take away functions that worked.
Am I wrong? Is there any way to choose or change a mixdown in a session? I like choice. Choice is good.
Cheers
RoosterKoop Ken

For clarity's sake, a stereo track with audio on one side is still a stereo track, not a mono track. So you're not really changing mono to stereo, you're just routing the active channel to fill both left and right sides. There are a number of ways to do that. I like #3 myself.
Larry Jordan - Premiere Pro CS6: Isolate Audio Channels | Final Cut Pro Training & Classes

Are iPad and iPhone built in microphones mono or stereo?

That's my question.

He assumed that you were hoping the mic would be stereo. As I said, though, for most use cases, a mono mic is just fine (or even better). What use do you have in mind. The only situation in which a stereo mic would be better is if you're going to record a stage or room full of musicians playing. If you're recording voice memos, or even recording yourself playing a single instrument, a stereo mic is unnecessary.
That said, we still haven't completely resolved whether the built-in mic is mono or stereo. The tech specs on apple.com don't specify, but I am 99.9% certain that it is mono.

Mono to stereo converter for 6600

Hey guys,
Does anyone have any clue how to convert music output from mono to stereo in the nokia 6600?
Thanks,
I need a reply soon plz!!!
Thanx

It is a physical impossibility. If there is only one line out signal, you can't convert it to two with any converter (software or hardware).
If you really must have stereo output, then you need a new phone.

Change between mono- and stereo-sound

My question is if there is any way to change between mono and stereo sound on the ipod nano 3th generation...?
Thanks for help!

Are you not getting stereo? What are you listening with - maybe there's a plug problem...
Does it sound like stereo from iTunes?

Converted mono to stereo

I converted a left channel recording from imovie hd to both channels using quicktime. Now the audio track is way to long even though the size is the same. Format: Linear PCM Channels: Mono Rate: 48 (the rate decreases the size but it doesn't matter). Any ideas how to keep the audio the same length.

I can't reproduce the problem with "Save as..." again, so the tracks switched from mono to stereo somewhere between the time I recorded them and by the time I was done tweaking their EQ and compression settings. I don't know how to delete or edit my discussion question above, sorry!

Random reset of ringtone volume since update to 2.0

Since updating to 2.0 my ringtone volume level, which I keep on the hightest level, will randomly reset to mid-level, causing me to miss a number of calls. Anyone else notice this and is there a solution?
Thanks

My 1st gen iphone (16GB) is up to the same antics. Pre 2.0 all was perfect. Then then update... During calls, if you adjust the volume for either the iphone earpiece, speaker phone, or bluetooth headset (I'm using the Plantronics voyager 520, which was purchased at the apple store), the ringer volume gets adjusted as well.
Just go into the sounds option under settings, make a call, and watch in awe as you adjust your call volume and ringer volume at the same time.
I've missed calls b/c the volume resets it self to a lower (random) setting. Now I must check after every call. The best part is if you push up on your volume button while at the home screen (the ringer volume pop up appears) and note that you have it on the highest setting, go ahead and check the sound option under settings. It will be at some random lower level. Oh my phone never did this on 1.4. I do hope the engineers are reading this and release a fix ASAP. The main purpose of the iPhone is to be a phone. Missing calls due to a low ringer volume is crazy.
Oh, I've already restored, don't bother, problem was not resolved. I haven't come across any other problems with the 2.0 update.

Random reset of Linksys router

Problem: Linksys router randomly resets in small business environment.
Model Number: WRK54G V2.0 (Router is part of Linksys Network Kit.)
Router Firmware: 1.00.1
Observations: Linksys router resets when Sony laptops are using the Linksys router and other routers (from neighboring small business) are on.
However,
Linksys router does not reset when Sony laptops are not using the Linksys router.
Linksys router does not reset when Sony laptops are using the Linksys router and the other routers (from neighboring small businesses) are off. This was discovered during after hours when neighboring small business were able to turned off their routers.
Solutions found on internet search: All internet search solutions found to date recommend replacing the Linksys router with another brand of wireless router. Solutions date back to March 2005.
Question 1: Does Linksys have a solution for using Sony laptops in a multi-router non-Linksys environment?
Question 2: What is happening in the Linksys router to cause it to reset?

My 1st gen iphone (16GB) is up to the same antics. Pre 2.0 all was perfect. Then then update... During calls, if you adjust the volume for either the iphone earpiece, speaker phone, or bluetooth headset (I'm using the Plantronics voyager 520, which was purchased at the apple store), the ringer volume gets adjusted as well.
Just go into the sounds option under settings, make a call, and watch in awe as you adjust your call volume and ringer volume at the same time.
I've missed calls b/c the volume resets it self to a lower (random) setting. Now I must check after every call. The best part is if you push up on your volume button while at the home screen (the ringer volume pop up appears) and note that you have it on the highest setting, go ahead and check the sound option under settings. It will be at some random lower level. Oh my phone never did this on 1.4. I do hope the engineers are reading this and release a fix ASAP. The main purpose of the iPhone is to be a phone. Missing calls due to a low ringer volume is crazy.
Oh, I've already restored, don't bother, problem was not resolved. I haven't come across any other problems with the 2.0 update.

HT4589 How do I change the audio to dual mono from stereo when using Share to DVD in Final Cut 10.1?

How do I switch the audio to Dual Mono from Stereo when using Share in Final Cut Pro 10.1? Even though the audio is all in dual mono in the timeline, it lists it as stereo in the share box.

Hi rationale1,
Welcome to the Support Communities!
The share to DVD settings in Final Cut Pro X use the Dolby Digital settings which are stereo for DVDs. So this can’t be done directly in Final Cut Pro X.
The link below will explain the Dolby Digital parameters and options in Compressor 4. You may need to research a different DVD authoring software to achieve your desired result.
Dolby Digital - Compressor 4 User Manual
http://help.apple.com/compressor/mac/4.1/#cpsrb71736a2
Dolby Digital
The built-in Dolby Digital settings (in the Create Blu-ray and Create DVD destinations, as well as the built-in AC-3 and EC-3 audio settings) use the Dolby Digital transcoding format. This format encodes Dolby Digital (AC-3) and Dolby Digital Plus (EC-3) audio files that contain multiple audio channels, including 5.1 surround sound. You can also create custom settings that use the Dolby Digital transcoding format.
Note: All files intended for video and audio DVD authoring must have a 48 kHz sample rate as required by the DVD specification.
DVD Video: Choose this option if you’re encoding for use in a DVD video authoring application.
DVD Audio: Choose this option if you’re encoding for use in a DVD audio authoring application.
Tip: For stereo encoding, rates of 192 kbps and 224 kbps are typical and will produce good results. For Dolby Digital 5.1 encoding, a rate of 384 kbps is recommended. For 5.1 Dolby Digital Plus encoding, a rate of 192 kbps is recommended.
Cheers,
Judy

Random resets H77MA-G43

Hello,
I build a PC two months ago with the components listed below with Windows 7 64 bit. It worked perfect for two months. Now I get random resets. No BSOD or anything, just a reset. After a reset I have to select to Start Windows Normally. I did not change any software or hardware.
MSI H77MA-G43
Intel Core i5 3350P
Corsair Vengeance LP CML8GX3M2A1600C9
Sapphire HD 4850 512MB
Crucial M4 CT064M4SSD2
Corsair Builder CX600 Bronze
Fractal Design Define Mini
I have tried the following to solve the problem.
Update the BIOS to V1.11.
Install new Windows, formatted the SSD.
Run tests with IntelBurnTest, passed it.
Checked every cable in the case, all fine.
Removed the reset cable from JFP1 on the motherboard.
Clear CMOS.
Measure temps: 30 when idle, 50 when using IntelBurnTest.
I think it is the motherboard or PSU, but I am not sure. So what should I do?
Thanks in advance.

Quote from: goodkid878 on 19-May-13, 03:56:53
Thanks for the help. It turned out to be the PSU. Solved.
Thanks for reporting! Corsair PSU's are usually extremely reliable. I hope this isn't a trend of a cheapening of their quality.

Mono to stereo or combine audio

I have an iMovie that is an electronic white board. I recorded an audio file from my Nikon (so I would think it would be stereo) and added that to the whiteboard video. I've been told the audio is mono, but I don't know how to verify that or how to correct it. 1. How can I tell if the audio track is mono or stereo? 2. If it is mono can I convert it to stereo or play it as mono on both tracks to simulate stereo? Thanks.

Hi
In iMovie You can not do any of it.
But You can
• From Event's - iPhoto Videos take it and drop it into a new Project
• From Project You export it as QuickTime and as Audio only (.aiff)
• This file You can open in an Audio/Sound-Editor as Audacity (free on Internet) or GarageBand ( might work ? )
And here in e.g. Audacity You can see if the Right and Left track are identical = MONO or have slight differences. I do this by invert one track and add it to the other - if it is silent - then the tracks are in Mono if not then You've got a Stereo Sound from start.
Mono to Stereo = Impossibly
Mono out via Left and Right speaker - Just copy the audio in one track and paste it into the other - BUT still when You listen all will come from center. Simulated Stereo - I've never seen any working application that can produce this.
When done in Audacity - then Save (still as .aiff) and import this to Your Movie project.
Far from so easy as in FinalCut Pro. Where You just pan audio to the other canal.
Yours Bengt W

Mono vs. stereo, answer to random resets?

Similar Messages

Maybe you are looking for