Monster cable itv link

Hi
I was just wondering if I can use the MonsterCable iTV Link wire to connect my MacBook to a television like I used to do with my iBook G4 14"? Do I need some sort of adapter?
Thanks.

Hi.
I have problems with connecting the cable.
The cable i have used to connect straight into the audio jack and mini-VGA (as I've learned here) of my iBook. which looks like this:
http://upload.wikimedia.org/wikipedia/en/thumb/2/2b/Mini-VGA.jpg/300px-Mini-VGA. jpg
My MacBook has a port, but I understand it is a mini-DVI port like in this picture
http://upload.wikimedia.org/wikipedia/commons/thumb/4/4f/Kobushi-mini-dvi.jpg/30 0px-Kobushi-mini-dvi.jpg
So I guess I need some sort of mini-VGA to mini-DVI adapter.

Similar Messages

  • IPhone TV out w/ iTV Link Monster Cable

    Purchased the Monster Cable iTV Link, how do I set my iPhone to use this for watching my movies on my TV? I cannot find any info in the user manual. Please help.

    Yes, that is what you need (they also sell a similar, component out cable. I have both of them and they work great).
    If you feel like spending another $50 (g) you might want to consider the universal dock as well:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=5B5 90630&fnode=standard/home/shopipod/ipod_accessories/cablesdocks&nplm=MB125G/A
    When you plug in the composite video cable to this and then dock your iPhone you can control the playback via the supplied remote. It only does stop/start and FF FB, but it's still very handy for controlling what you see from across the room. It's also easier to simply dock the phone rather than try and connect the composite cable to it.
    I bought two of them to pair with my composite and component cables, and it's very very cool to watch videos from your phone on a large TV (I have one connected to a 38" TV and the picture is every bit as good as DVD). The slideshow also works, along with YouTube (but nothing else, so don't think you can simply view Safari through this).

  • Monster iTV Link Cable

    hey there all,
    just been reading some posts & thought i'd pass this along. i've been using a Monster Cable to connect my MacBook to my Olevia 26" 16:9 LCD HD monitor/TV. it's the iTV Link cable for the old 12" PowerBook, which also had video out over a mini-DVI connector. the cable is 10 feet long, has a mini-DVI + 1/8" stereo plug on the Mac end & an S-Video + 2 RCA plugs on the TV end. i've set my MacBook for extended desktop & use the external monitor w/ Final Cut Express to display the Canvas. i know it's not the greatest for "real serious work" but to be able to be in bed & work on a project from an external FW hard drive as opposed to going downstairs & firing up the "Big Mac" it's pretty cool, also for watching a DVD on the bigger screen. & once i set the extended desktop it's easier to work in FCE as opposed to sending signal over firewire to my cam/deck then to a TV, because the MacBook sees the TV as 2nd computer display(it shows the desktop wallpaper). the TV is set as follows: resolution 1024 x 768 @ 60 Hz(NTSC), millions of colors. the TV is also set @ fullscreen from it's menu. the MacBook is set @ max native resolution 1280 x 800, millions of colors.
    i got 2 cables from CompUSA($15.00/ea.) less than 1/2 the original list price. probably because there are no more 12" P'Books & they think they have no market for them & want to get 'em out of inventory. iTV Link cable might also work for MacBook presentations using a Projector.
    hope this helps someone.
    DP 2.0 G5 w/ 2.5 GB RAM, 20" Cinema Display, 23" Philips HDTV   Mac OS X (10.4.8)   17" FP iMac G4 w/ 512 MB RAM, MacBookC2D w/ 1GB RAM

    iPod AV Cable M9765G/A

  • Monster iTV Link for Macbook- Mini-DVI ports different...

    I have been watching movies etc. on my TV through my 14" G4 iBook for the last year using the Monster iTV Link with the mini-DVI end. I recently bought a Macbook and expected to do the same with it, but the mini-DVI ports are a different shape!
    I have scoured the internet for some information on different mini-DVI ports but have come up short. Can someone explain why Apple would install a different mini-DVI port on the Macbook? Or not install an S-video?
    Regardless of why they did this, I now need a new adapter or Monster needs to make a new iTV Link cable for Macbook. Has anyone seen an iTV link for Macbook? Is there one out there I can use?
    I am assuming my other option is to buy the mini-DVI to video adapter, use the audio part of the Monster cable I currently have and get a S-Video cable. However before I acquire more cables and adapters...
    Can someone confirm that the the Mini-DVI end of the Mini-DVI to Video adapter is the correct shape (version) for the MacBook.
    THANKS
    Macbook Intel, 14" G4 iBook   Mac OS X (10.4.7)  

    Welcome to Apple Discussions!
    It would appear the Monster guy is confused what cable you got. The iTV cable I bought up on Google has the standard round-din S-Video connector found on 15" and 17" Powerbook G4s of the same generation, but I don't think that is found on the 12" Powerbook. What you need is a DVI to S-Video connector to hook up the iTV cable from all indications.
    This may be what you are looking for:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M92 67G/A

  • Monster ITV Link

    HI guys
    after seeking advice from apple over the phone as to the best way to connect my macbook to my TV they advised I get a Monster ITV Link cable with a scart adapter. The picture displays by using this but in black and white, is there anything I can do?
    Thank you for your help

    hey there & welcome to Discussions.
    i have a Monster iTV link w/ miniDVI> S-video. also has a 1/8" stereo mini plug to stereo RCA plugs. 10 foot cable made for a 12" P'Book G4. works. has come in handy.

  • IPhone 32 GB 3GS TV output with Monster iTV Link

    I have used my Monster iTV Link cable http://www.monstercable.com/productdisplay.asp?pin=3897 to connect my 80GB 5th generation ipod (through the dock port on the bottom) to my Chevy Avalance's AUX Video input via left, right audio and video plug. When using my old ipod and selecting a video it will automatically ask for "TV out" on or off. I switch it to "TV on" and my ipod plays through the cable into my AUX Video input with great video and audio quality in my vehicle. I tried the exact same thing using my new iphone 32GB 3GS and nothing happens. It does not ask to select "TV on" It plays through the iPhone speakers as if it wasn't connected to anything.
    When using the mini jack input from my 5th generation iPod and my new iPhone 3GS into the vehicle AUX audio jack input the result is the same. Both play through the vehicle speakers. However, the mini jack audio quality is noticeably inferior to the dock port on the bottom of the devices.
    Why don't both play through the AUX video input?
    I tried changing the settings in my iPhone (NTSC & PAL) with no luck?
    The website for Monster says the cable is for "iPod Video" is it possible the cable is not iPhone compatible?
    How do I get my new iPhone to play through the bottom dock port to my left right audio, video, input?

    Older video cables are not compatible with the iPhone. The Apple A/V cables are:
    <http://store.apple.com/us/product/MB129LL/B> Composite video
    <http://store.apple.com/us/product/MB128LL/B> Component video

  • Using Monster iTV Link to connect to 42" Plasma

    I have a 12' G4 iBook bought in October 2003.
    I want to use the Monster iTV Link cable to play DVDs from te iBook and display them through my Panasonic Viera 42" Plasma TV.
    Are there any issues I should be aware of, or is this a straightforward
    process?
    Any advice at all would be much appreciated.
    Thanks in advance.
    Kieran

    Check out the resolution of your plasma. As i can assume it is wide screen... Also try to connect it via regular monitor cable. Besides this adapter goes with your laptop. It will be much better. DO NOT FORGET THAT YOUR iBook IN STANDARD MODE COULD WORK WITH EXTERNAL TV OR MONITOR IN MIRRORING MODE ONLY. To unlock possibility to work in extended desktop mode you could use SSD (Screen Spanning doctor). Suggesting you to use it as resolution of your laptop monitor and plasma is different.
    Ask if something is not clear.
    Ivan

  • Monster iTV Link for 13-inch MacBook and 12-inch PowerBook

    Does anyone knows or the Monster iTV Link for 13-inch MacBook and 12-inch PowerBook even work with the imac intel-based mini-dvi port?
    hp   Windows XP  

    I went with the crucial 512 SSD.  It will push your budget just a tiny bit more as with tax and shipping it came to about $834 but oh man what a difference this makes!  My MBP sprang to life with this SDD... Everything simply pops open instantly.
    www.crucial.com
    On transferring, I suggest the following: 
    Get a copy of SuperDuper
    Buy an external case for your internal drive.
    Install SuperDuper on your current HD (before swapping)
    Perform the HD/SSD swap, so your SSD is in the MBP, your HD is now in the external case.
    Plug in the external HD and power up holding down option.  You should be presented with a choice of boot drives (DVD and your external).  Boot off your external.   Once OS is loaded, use Disk Utility to format and initialize your SSD.  BECAREFUL that you initialize the SSD and NOT the external HD!!!
    Now run SuperDuper, clone from the external to the internal SSD.  It might take an hour or so to do this.  When complete.  Power down, disconnect the external and reboot.  If you've done everything right your computer should come up on the SSD but basically will look exactly like your old drive.
    You're good to go.  Use it a few days and make sure everything is good, then you can format your external and use it for general purpose storage!
    I'm not sure this will work on the 13" but these guys:  www.mcetech.com make a bracket that you can remove your internal DVD and install your old HD inside.  This way you have your SSD + your old HD installed at all times.  You move your DVD to an external case.  I did this in my MBP 15 so now I have basically a 1 TB laptop.  My main drive is the SSD but for storage of stuff I don't use all the time I have the HD which is also 512gb.  Pretty cool.  For me I didn't use the internal DVD that much so having it in an external case was just fine.

  • Using iTV Link

    The cable MONSTER iTV Link is compatible with the iPOD Classic 80GB to view videos and photos on a TV?

    No. You need a cable from Apple.
    http://docs.info.apple.com/article.html?artnum=300233

  • HT4614 How can i use the Thunderbolt cable to link my Mac computers

    How can i use the Thunderbolt cable to link my Mac computers

    Connect them with it and start up one computer with the T key held down.
    (76624)

  • I have the old skool Monster car cable--i tune in the channel on the Monster cable and my old iPod plays. I bought the adapter for Lightning to accommodate the new iPod i just bought. But it won't play. ***?

    I have the old skool Monster car cable--i tune in the channel on the Monster cable and my old iPod plays. I bought the adapter for Lightning to accommodate the new iPod i just bought. But it won't play. ***?

    It could just be a compatibility issue.  Have you tried resetting the Nano with everything connected to see if that makes a difference?
    To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • I have and audgiy card with us 5.25 drive but i lost the cable with link it to the sound c

    have and audgiy card with is 5.25 dri've ,but i lost the cable with link it to the sound card/
    the model number of the 5.25 dri've is sb000/
    serial no:tsb004007876.
    is thare any way i can buy the cable form you?

    Just to confirm, you are logged into the iTunes Store using the account in which the balance exists, and the balance is showing at the top of the iTunes Store window? And you're not trying to purchase gifts for someone else?

  • WRT310N Active - Cable Modem Link light off. WRT310N of - Cable Modem Link Light On.

    Been having intermittent disconnects with new WRT310N router (using old and new firmware).  When I lose connection, the cable modem (Moto SBV5120) link light is off.  If I remove power from the router, the cable modem link light comes on immediately.  As soon as I apply power to the router, the modem link light goes off.
    It appears that settings/something faulty with the router is crapping out the cable modem's connection.
    Thoughts??

    Connect the computer to the Modem & see if the Internet Light works fine or not ....
    Because if modem does not show proper lights after connecting to wireless router ....you need to check the settings on the Modem itself ....

  • Alternative to Monster Cable TOSlink cable?

    Any chance there's a cheaper mini-to-optical cable out there that takes advantage of the AX's optical output?
    I understand Monster's mini plug has an optical connector at the end so you're getting true optical-to-optical connectivity.
    I'd really rather pay less than $40 for a single cable instead of the full amount for three cables, including two I don't need, but fear that other mini-to-optical cables (if they exist) would only allow analog-to-optical connectivity (in other words, the mini end would not have the optical tip).
    If indeed such a single cable (and cheaper) option exists, links would be appreciated.
    Thanks...

    You can use an optical cable with a mini connector at one end and a Toslink connector at the other, or you can use an optical cable with Toslink connectors at both ends and a Toslink to optical mini adapter. Here are a few examples:
    http://www.amazon.com/exec/obidos/tg/detail/-/B00007E878
    http://www.amazon.com/exec/obidos/tg/detail/-/B0000649EZ
    http://www.amazon.com/exec/obidos/tg/detail/-/B0002MQGRM
    http://www.crutchfield.com/cgi-bin/ProdView.asp?g=37400&I=043185106A

  • Cable modem link slowness w ISA570 and CLI "show tech" equivalent

    Hi, I'm helping out a non profit that has a Mediacom 100mbs link, they get 90+ Speed connected directly to the cable modem, but anywhere past the ISA570 they only get 50-60mbs. They have switched cables, added a separate port, tried different PCs, results are the same, 50-60 mbs max.
    Also it's their understanding the ISA570 can't do CLI, so how can they get the equivalent of a 'show tech' command to a file to send offsite for troubleshooting,
    Thanks.
    Jim

    Hello,
    There is something similar to show tech on the ISA.
    Log into the web GUI, go to Device Management >> Cisco Services & Support >> Send Diagnostics.  At the bottom of that page is a Download button that will collect the config file, the logs, and some debug outputs into a zip file.  You can use this to troubleshoot the device, although I usually prefer to be on the live device itself to look at things.
    Before you dig too deep into those however, what kind of security services do you currently have enabled on the ISA?   I was looking over the datasheet and while the SPI is capable of ~500mbps, when you start to enable the various security services those speeds start to drop.
    If we look at the UTM (Unified Threat Management) throughput measures, that is at about 75mbps, which is fairly close to what you are getting.  I would go through and disable the various security services one at a time and test your speed.  My guess would be either A/V or IPS is slowing your connection down.  It may be one or a combination of these services causing the slowdown.  You can disable those options, or just explain that the extra security will cost a bit of speed.
    Hope that helps a bit,
    Christopher Ebert - Advanced Network Support Engineer
    Cisco Small Business Support Center
    *please rate helpful posts*

Maybe you are looking for

  • In Excel how to make a worksheet as default

    Hello , I have a Excel file called Report.xls . In this file there are many worksheets. Everytime I open this Excel  file, i want the second sheet as the default sheet which is visible to the user. The Excel file should always open with the second sh

  • Application pkg install in non Global zone

    I have got another virtual instance up on solaris box, i am trying to install application pkg which writes to /usr which is mounted as read only. is it possible to create policy to write under that folder e.g. /usr/writable where u can add/change stu

  • How can I print stuff from the 'Help' file using my MacBook Air?

    How can I print stuff from the 'Help' file using my MacBook Air?

  • Get PO Approval limit for Approver and substitute

    Hello all, Description: When an approver assigns a substitute for approval, the PO Value Limit (HRP5503-LIMIT) for the position needs to be equal to or greater than that of the approver.  If this is not true, then an error message saying u201CSubstit

  • Problem trying to save FM 8.0 file as PDF

    I have used Robohelp version 7.1 for several years. Yesterday, I installed the Technical Communication Suite. I opened and converted all 7.1 files in a 7.1 book to 8.0 Framemaker. Now, I'm trying to save one file as PDF and am getting the following e