Monthly Balance Sheet is not balanced
Hi Everyone,
I just found out that when I print my balance sheet by monthly, in some month, the figure of my "assets" is not equal to my "liabilities + equity". But when I print in annually, the both are tally.
What could be the cause?
Thanks in advance,
Best Regards,
Kevin
Hi
Sorry by due to missintereption wrongly posted
Giri
Edited by: Giri dharan on Aug 27, 2009 12:08 PM
Edited by: Giri dharan on Aug 27, 2009 12:48 PM
Similar Messages
-
Balance sheet valuation not active (Customizing transaction OMWE)
Hi,
For FIFO Valuation, I have done the following SPRO setting:
1. Activate balance sheet valuation (Trans: OMWE) - as LIFO not relevant, FIFO active.
2. Defined LIFO/FIFO valuation levels (Trans: OMWL) - set as Plant (valuation area).
3. Configured FIFO Valuation areas for year 2008.
4. Define LIFO/FIFO method (Trans: OMWP) - FIFO01 as CUR u2013 current
5. No changes made to movements relevant to FIFO (Trans: OMW4);
While running the MRF1, the system is throwing the following message:
Balance sheet valuation not active (Customizing transaction OMWE)
Message no. MY043
Pls. help in rectifying the problem.
Pls. note that I have already activated the LIFO/FIFO-relevant Check box while creating the Material.
Do I need to execute MRF4 before executing MRF1?
Regards,hey guys... can anyone help me to solve this issue....
-
J2iu Not Showing Previous month Balances For PLA (High Priority)
Dear Gurus
We are using Transaction J2iu for Fortnight Utlization. Now When we are
trying to utlize PLA for the second Fortnight Of month March 07, The
System is only showing the Current Month Balances ie The Balances for the
month Of March 07 , And not accounting the balances for the previous months.
Kindly Suggest .Carry Forward the GL Balances to Next Year i.e in Apr.07 &
then Try it out again.
Sometimes, System takes into account reatime balances & not balances as on particular posting date.
Regards..
Ameya... -
Monthly balances - GL accounts
Hi,
I have a requirement of generating monthly balances (Please note that its not period wise) of GL accounts as per legal requirements.Can some one guide me as to how to accomplish this? Also guide me as to which table is updated with monthly balances.
Thanks in advancePurchase info record -
Message type : INFREC
SAP Standard Program - RBDSEINF
G/L Accounts -
Message type ,Idoc Type
GLMAST / GLMAST01.
It is possible to send the data from one system to other syetm,setup all configuration.
Reward points
Thanks
Seshu -
We are running PS with valuated project stock. Our accountants would like to have a monthly balance of all project stock similar to what SAP can produce for plant stock in MC.5. Does anyone know how to do this or something similar?
Hi,
Please check MMBE for Project Stock Or MBBS - valueated Q Stock.
hope this will help you.
Swapnil Kharul -
How do I know I'm the remaining monthly balance monthly common touch
How do I know I'm the remaining monthly balance monthly common touch
Put it on, drop it from the top of ur stairs and see if it works
-
I am building a monthly time sheet. I need all the dates to populate once the initial date is chosen by the user. I have this working properly for each month that has 31 days. For months with 30 days, it populates the first day of the next month. How do I make sure that the only the dates for the month selected are populated?
Any help is appreciated!
TracyHello!
Thank you for your response, but I can not get it to function properly.
I added a text field to calculate the number of days. Here is the script I placed in the text field:
form1.commentSub.NoofDays::calculate - (FormCalc, client)
var StartDate = Ref(SubPg1.tableSub.Table1.Row1.Date1)
var EndDate = Ref(SubPg1.tableSub.Table1.Row2.Date2)
var MonthStart = Date2Num(Date1.formattedValue, "MM/DD/YYYY")
var nMonth = Num2Date(MonthStart, "MM") ; Current Month
var nDay = Num2Date(MonthStart, "DD") ; Current Day
var nYear = Num2Date(MonthStart, "YYYY") ; Current Year
var nFirstDay = Date2Num(Concat(nMonth,"01", nYear), "MM/DD/YYYY") ; First Day in the current month
var nLastDay
var nCountDays = nFirstDay
StartDate.rawValue = Num2Date(nFirstDay, "MM/DD/YYYY") ; Set first day of month as start date
; Determine number of days in the current month
var nMonthCheckStart = Num2Date(nFirstDay, "MM")
var nMonthCheckEnd
for i=0 upto 31 step 1 do
nCountDays = nCountDays + 1
nMonthCheckEnd = Num2Date(nCountDays , "MM")
if(nMonthCheckStart == nMonthCheckEnd) then
nLastDay = nCountDays
endif
endfor
EndDate.rawValue = Num2Date(nLastDay, "MM/DD/YYYY") ; Set lastday of month as end date
$.rawValue = Num2Date(nLastDay, "DD") ; Set number of days this month
In the date field where the user selects the date. I have this:
form1.SubPg1.tableSub.Table1.Row1.Date1::exit - (FormCalc, client)
var dayNum = Date2Num($.formattedValue,"MM/DD/YY")
Row2.Date2.rawValue = Num2Date(dayNum+1,"MM/DD/YY")
Row3.Date3.rawValue = Num2Date(dayNum+2,"MM/DD/YY")
Row4.Date4.rawValue = Num2Date(dayNum+3,"MM/DD/YY")
Row5.Date5.rawValue = Num2Date(dayNum+4,"MM/DD/YY")
Row6.Date6.rawValue = Num2Date(dayNum+5,"MM/DD/YY")
Row7.Date7.rawValue = Num2Date(dayNum+6,"MM/DD/YY")
Row8.Date8.rawValue = Num2Date(dayNum+7,"MM/DD/YY")
Row9.Date9.rawValue = Num2Date(dayNum+8,"MM/DD/YY")
Row10.Date10.rawValue = Num2Date(dayNum+9,"MM/DD/YY")
Row11.Date11.rawValue = Num2Date(dayNum+10,"MM/DD/YY")
Row12.Date12.rawValue = Num2Date(dayNum+11,"MM/DD/YY")
Row13.Date13.rawValue = Num2Date(dayNum+12,"MM/DD/YY")
Row14.Date14.rawValue = Num2Date(dayNum+13,"MM/DD/YY")
Row15.Date15.rawValue = Num2Date(dayNum+14,"MM/DD/YY")
Row16.Date16.rawValue = Num2Date(dayNum+15,"MM/DD/YY")
Row17.Date17.rawValue = Num2Date(dayNum+16,"MM/DD/YY")
Row18.Date18.rawValue = Num2Date(dayNum+17,"MM/DD/YY")
Row19.Date19.rawValue = Num2Date(dayNum+18,"MM/DD/YY")
Row20.Date20.rawValue = Num2Date(dayNum+19,"MM/DD/YY")
Row21.Date21.rawValue = Num2Date(dayNum+20,"MM/DD/YY")
Row22.Date22.rawValue = Num2Date(dayNum+21,"MM/DD/YY")
Row23.Date23.rawValue = Num2Date(dayNum+22,"MM/DD/YY")
Row24.Date24.rawValue = Num2Date(dayNum+23,"MM/DD/YY")
Row25.Date25.rawValue = Num2Date(dayNum+24,"MM/DD/YY")
Row26.Date26.rawValue = Num2Date(dayNum+25,"MM/DD/YY")
Row27.Date27.rawValue = Num2Date(dayNum+26,"MM/DD/YY")
Row28.Date28.rawValue = Num2Date(dayNum+27,"MM/DD/YY")
Row29.Date29.rawValue = Num2Date(dayNum+28,"MM/DD/YY")
Row30.Date30.rawValue = Num2Date(dayNum+29,"MM/DD/YY")
Row31.Date31.rawValue = Num2Date(dayNum+30,"MM/DD/YY")
Row1.Day1.rawValue = Num2Date(dayNum,"EEE")
Row2.Day2.rawValue = Num2Date(dayNum+1,"EEE")
Row3.Day3.rawValue = Num2Date(dayNum+2,"EEE")
Row4.Day4.rawValue = Num2Date(dayNum+3,"EEE")
Row5.Day5.rawValue = Num2Date(dayNum+4,"EEE")
Row6.Day6.rawValue = Num2Date(dayNum+5,"EEE")
Row7.Day7.rawValue = Num2Date(dayNum+6,"EEE")
Row8.Day8.rawValue = Num2Date(dayNum+7,"EEE")
Row9.Day9.rawValue = Num2Date(dayNum+8,"EEE")
Row10.Day10.rawValue = Num2Date(dayNum+9,"EEE")
Row11.Day11.rawValue = Num2Date(dayNum+10,"EEE")
Row12.Day12.rawValue = Num2Date(dayNum+11,"EEE")
Row13.Day13.rawValue = Num2Date(dayNum+12,"EEE")
Row14.Day14.rawValue = Num2Date(dayNum+13,"EEE")
Row15.Day15.rawValue = Num2Date(dayNum+14,"EEE")
Row16.Day16.rawValue = Num2Date(dayNum+15,"EEE")
Row17.Day17.rawValue = Num2Date(dayNum+16,"EEE")
Row18.Day18.rawValue = Num2Date(dayNum+17,"EEE")
Row19.Day19.rawValue = Num2Date(dayNum+18,"EEE")
Row20.Day20.rawValue = Num2Date(dayNum+19,"EEE")
Row21.Day21.rawValue = Num2Date(dayNum+20,"EEE")
Row22.Day22.rawValue = Num2Date(dayNum+21,"EEE")
Row23.Day23.rawValue = Num2Date(dayNum+22,"EEE")
Row24.Day24.rawValue = Num2Date(dayNum+23,"EEE")
Row25.Day25.rawValue = Num2Date(dayNum+24,"EEE")
Row26.Day26.rawValue = Num2Date(dayNum+25,"EEE")
Row27.Day27.rawValue = Num2Date(dayNum+26,"EEE")
Row28.Day28.rawValue = Num2Date(dayNum+27,"EEE")
Row29.Day29.rawValue = Num2Date(dayNum+28,"EEE")
Row30.Day30.rawValue = Num2Date(dayNum+29,"EEE")
Row31.Day31.rawValue = Num2Date(dayNum+30,"EEE")
It still adds the beginning date for the following month if the month selected only has 30 days.
I am not sure how to attach the file here for you to see.
Tracy -
My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
FACT SHEET Configuration not saving in transport to move to QA system
hi Experts
I am setting up the Account Fact Sheet BP_ACCOUNT_FS for my users and the only configuration that is saving is the configuration of the layout of the fact sheet to a transport. The actual settings or configuration within the fact sheet is not saving. For example, I used a BI report and added my query and parameter and while this saves in our development box, this will not save in the transport to move up through the systems.
Any thoughts? I already have a message open with SAP but checking to see if anyone has an immediate solution.
Thanks,
ChrisHi,
P-table is an time independent attribute table ie it contains all the attribute info. in that table. so when u added a characteristic to that infoobject, u can find that entry in the P-table.
Also M is a view on P & Q tables. It is not a table.
T- ie Text table will contain only short,medium and long texts related to that info object.
so when u add a characteristic to infoobject it will be refelcted in P-table or Q- only. Not in Text tables.
Narendra Reddy -
my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.
Most likely, water damage.
You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.) -
"Entry sheet does not exist message no. SE012"
Dear all,
One SES is created and saved. Now if i check system message as below.
"Entry sheet does not exist message no. SE012"
Please adviceHi Deepu,
Please check in the PO, if in the Item Detail, The tab "Purchase Order History" is there or not, if it is there with the SES no, it means that the SES is created and you might not be able to view the same Please check the same no in the table ESSR.
Hope it helps you.
Regards,
Yawar Kahn -
When I try to synchronise my calendar it all goes wrong when I have recurring appointments which I enter on Outlook. These are in the format ' first Tuesday of each month' as I play Bridge with different partners on different days each month so it is NOT every 4 weeks necessarily, it depends on the month. These get lost on synchronisation or sometimes end up on a totally different day/date. What can I do as it is very annoying.
Also it altered some theatre dates where I had entered both date and name of play - the name of the play vanished when I synchronised not just on i-pad but it deleted the info from Outlook as well.Others have the same complaint. iCal on the iPad can do recurring appointments, but not in the format you want (First Tuesday of every Month). It will do the same DATE each month (e.g, the 25th of each month), but for now it does not do a particular DAY of each month.
-
How to identify if the data is excel sheet is not on fixed column in SSIS package
Hi, I am using SSIS 2008 R2 in which my excel file is the source for data. I am using the "Excel Source" transformation. For the normal data feed and all it is working fine.
There is a requirement the data in the excel sheets are not static. For example think like, data may start from A1 Cell next it may be B1 or B2 and next time E1 or F2 like that. How to identify in which Cell the data is there to load to DB?
Kindly tell me whatever the possibilites are there ....
SridharHi ,
The mapping of SSIS packages cannot be modified at run time based on the input. Instead , you may consider to bring all the columns from excel into a staging table and figure out from where the data starts. Then load the destination table. If not
you need to think of creating the ssis package itself dynamically using .Net code based on the excel metadata.
Best Regards Sorna -
The battery of my two months old iPad2 is not charging anymore. Somebody knows what is going on?
Hi there Dan Laven,
You may find the information in the article below helpful.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/ht1476
About battery life and the battery
Battery life and number of charge cycles vary by use and settings. Find more information about batteries for iPhone and iPod.
Find information on how long the battery is expected to last between charges.
Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced.
-Griff W. -
I have the new iphone and thought I could download Netflix but only found "Netflix Instant's Best Movies" in the apps. I pay for Netflix monthly. Is it not possible to download it here and use it on the iPhone? Insight appreciated.
TJBUSMC1973 wrote:
The iPhone is working, as designed and advertised. In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
Best of luck. -
How to undelete a sheet on NOTES app.
I delete a sheet from NOTES and I need to recover it. Is there an option to reaches it and brings it back?
No way to recovery it, do you have a Time Machine backup you may able to restore you app.
Maybe you are looking for
-
I have recently purchased an iMac running Lion. The HP Photosmart 3210 printer was connected through the network and I was happy that it recognised the printer - good old Mac's!! However, when I tried to print some of my photos from the photo tray, t
-
Iphone 6 emoticons showing up as question marks
My iphone 6 is not showing emoticons in text messages, they are coming up as question marks. The messages are coming from an IPhone 4s to my 6, the IPhone 4s did the update for IOS and that has still not remedied the issue. I should also note that
-
How can I check Bandwidth of the user
I want to check Bandwidth/Connection speed of the user, by downloading one non-compressible file to his system. And the time taken to do this process will give me the connection speed. Can you tell How is it possible in JSP. Regards, Ankur
-
Flex 4 Premium reference to the Stage issue! width and height seem to be switched??
So I am doing a very basic resize effect with a panel, but if I want it to fill the screen, I have to switch stage.stageWidth and stage.stageHeight. I have also traced them out and they come out as switched values. Anyone else having this issue? prot
-
I am a GNOME user, however I do admit to loading up XFCE and KDE sometimes, to see if the grass is greener on the other side. Usually, I could do this without anything changing on the GNOME side, but nowadays I'm finding that when I installed KDE, so