MOPZ: no System in SMSY for the installation number 1234567879 found
Hi!
Within SOLMAN MOPZ by opening a new maintenance action I get the following error:
no System in SMSY for the installation number 1234567879 found
Question:
How can I find this installation number within SMSY and solve the problem?
Thank you very much!
regards
Hi,
the question still is:
how to identify the system that currently has this installation number?
When I go to SMSY --> Landscape Components --> Systems and search for the installation number I get no results.
I think that this system no longer exist in SMSY...
Any idea how to proceed?
Similar Messages
-
I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?
Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts; -
Adobe won't accept my System Admin Password for an installation, what to do?
Adobe won't accept my System Admin Password for an installation, what to do? This password has been used for years and years and has never failed. Something in the communication to Adobe for an installation (Bridge CC) failed but they offer no suggested alternate action. Thanks to everyone.
attach a screenshot of the password prompt, http://forums.adobe.com/message/4209263#4209263
-
Hello everyone,
I have install windows XP in my existing windows 7 64 bit system using virtualization software. I have allocated 1024 MB of RAM to XP virtual windows.
Now, M trying to install oracle developer suite 10g and oracle database 11 in the XP windows.
IS 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???
And which one to install first developer suite or database????
Thanks in advance.you should check (before installing) requeriments from documentation.
Oracle Developer Suite Installation Guide 10g (10.1.2.0.2) for Solaris, Windows and Linux x86
Table 4 Memory Requirements for Oracle Developer Suite Components
Component
Memory
Oracle10g JDeveloper (including Oracle Business Intelligence Beans, and UIX and Bali subcomponents)
Minimum: 256 MB
Recommended: 512 MB
Oracle Reports Developer
Minimum: 128 MB
Recommended: 256 MB
Oracle Forms Developer
Minimum: 128 MB
Recommended: 256 MB
I usually install first database and later DS, I never tried first DS and later database. -
can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?
Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.
-
Hi Team,
Unfortunatly, I plugged-in one of my friends external hard drive, and its asked me for the seagate driver instalation, after that every time when I am turning on my system, its asking for the goFlex software instalation process.
I tried out some process by googleing, I tried to remove the complete segate from my system, still it didn't help me.
Please help me with, to remove a complete segate package.
Thanks,
Jayaram.Thanks Richard.
The 3 point did help me, now its not all asking for the each time instalation for the same driver.
Here one question comes to my mind, by deleting the content of the temp folder for the segate and removing all the releated files from the application, library->application support, library->extension, library->LaunchAgents, I deleted all the releated files of segate, could you please let me know if I need to delete from any more location to avoid the garbage files.
Thanks for your time and help -
Creating system in portal for the backend SRM
Dear All,
We are in the process of setting up a system in portal for the backend SRM system
I have tried to create system in System admin--> System configuration --.>System landscape
For SAP Web AS Connection , the parameters maintained are:
Hostname : <FQ hostname>:8000 ( 8000 is the HTTP port for ICM)
Web AS path: /sap/bc/webdynpro
protocol :8000
But test is failing as 'An HTTP/S connection to http://xxxxxxxxx::8000/sap/bc/webdynpro was not obtained successfully; this might be due to a closed port on the Firewall:
test details:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (bhidfwao06.ent.bhicorp.com:8000)
5. The host name bhidfwao06.ent.bhicorp.com was resolved successfully.
6. The Web AS ping service http://bhidfwao06.ent.bhicorp.com:8000/sap/bc/ping was pinged successfully.
7. An HTTP/S connection to http://xxxxxxxxx::8000/sap/bc/webdynpro was not obtained successfully; this might be due to a closed port on the Firewall.
Is there any problem with the port, I doublechecked and the port for HTTP is 8000.
If I give the Web AS path: /sap/bc/bsp test is successful.
Any pointers please?
Regards,
Arunhi arun,
u may have to activate some more services in sicf
u can follow this link what are the neccesary applicaiton need in sicf
http://help.sap.com/saphelp_nw70/helpdata/EN/46/d28dfa34bb12bee10000000a1553f7/frameset.htm
let me know u need any further information
ravindra -
How to creat a Business System and Tech System in SLD for the DB2 DataBase?
Hi,
How to creat a Business System and Tech System in SLD for the DB2 DataBase?
JosephHi,
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Go Through this links..
TBIT41:
https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
TBIT42:
https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
TBIT43:
http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
TBIT44:
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
Also try elearning.
https://www.sdn.sap.com/irj/sdn/elearn
Thanks,
Satya Kumar -
I bought this iPhone from a guy and later on he passed away in Syria , after that , I tried to update the soft ware to ISO 7 but the system asked me for the old owner's information which I do not know so could you please advice me on that , what can I do to reactivate the device ?
You cannot reactivate the device without knowing the previous owner's information. This is the new antitheft measure built into the iPhone.
There's nothing you can do. You'll need to purchase a new phone. -
I have just transferred my entire application file from an Imac to an identical Imac, both running OS 10.9.5. Everything works fine, excepting that when I attempt to open Photoshop 6, I am prompted for the serial number. I enter the serial number provided by Adobe, which I have confirmed with my "previous purchase" records kept by Adobe. It is demanding a "qualifying product", all of which is contained in the complete files I transferred. Why can't Adobe recognise my valid serial number for Photoshop 6?
I have just transferred my entire application file from an Imac to an identical Imac,
Say what?
Please use the proper installer.
Are you really talking about Photoshop 6 or about Photoshop CS6? -
Installing Photoshop CS4 from original Disk onto my new Macbook Pro. Serial number accepted but now asks for the serial number of a previous version e.g. CS3 which I no longer keep. How do I resolve ?
Tina Hadley did you migrate/transfer your applications over to your new Macintosh? If so this could cause problems with your serial number being recognized. Please run the available uninstallers located in Applications/Utilities/Adobe Installers folder. Once this is done you will also want to run the CC Cleaner Tool. Details on the use of the CC Cleaner Tool can be found at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
-
so im trying to reinstall my itunes and there is a message saying that the dll to finish the installation is not found. so i need to contact the support. can anybody help me with this problem please.
Hi Dimas Muchammad,
Thanks for visiting Apple Support Communities.
If you are installing iTunes 11.1.4 on Windows and receiving an error during installation, the specific troubleshooting steps in this article can help:
iTunes 11.1.4 for Windows: Unable to install or open
All the best,
Jeremy -
Aperture forgets it license and asks me for the serial number over and over again
Hi,
This is getting ridiculous to the point where I'm thinking of just ditching Aperture. It's continually forgetting is license and asking me for the serial number over and over again. I have the original serial number and an upgrade number when I upgraded to v3, but right now, it's not accepting either of them. What's going on and how do I fix it permanently?
Thanks,
RobRob, have you upgraded to Aperture 3.4.3? This is supposed to have fixed the serial number problem:
http://support.apple.com/kb/DL1610
About Aperture 3.4.3
Addresses an issue that could cause a licensed copy of Aperture to prompt for a serial number with each launch
Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise can it not be stored.
Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library, and this requires read/write access for administrators. Do you enter your serial number using an administrator account?
When did this start? Have you migrated your system from from another mac? Then you still may have an older ProAppSystemID file or Aperture cannot write to the System Library.
To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see the file there, move it to its proper location.
In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
Regards
Léonie -
can't install my adobe creative suite after i put the serial number. its asking for the serial number for cs3 and i don't have that.... what do i do?
ANd what exactly? You hav not told us, what you are actually trying to install onto what system and other details....
Mylenium -
I got my adobe creative license but the app are asking for the serial number. What can I do?
Welcome to Adobe Forum,
Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
So you need to login with your Adobe ID and password to activate the cloud membership.
Log out & log back in of the CC Desktop App.
In case it is not signing in successfully please try the following:
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
Windows:
In windows 7 navigate to following location:
/windows/system32/drivers/etc
1. look out for "Hosts" file
2. Open it with notepad
3. Check if you have any entry for Adobe
4. Remove the entries and try again launching any product from CC
Mac:
1. Please click on "Go" and navigate to /private/etc
2. Open "hosts" file and check out for any entries for Adobe.com
3. Remove the entries and save the file
4. try again launching any product from CC
You can refer :
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html.
Please let us know if it worked.
Regards,
Rajshree
Maybe you are looking for
-
Can No Longer Sort New Files By Date!
Whenever I download new files and try to access them in finder by sorting by ANY of the date related fields, the new files always show up under "No Date" making them a pain to access. WHY??? Most other files show up in the different categories "Yeste
-
FRM-92101- There is a failure in the form server during startup.
Hi, I'm deploying a forms 10g application . I'm using Oracle Application Server Forms and Reports Services 10.1.2.0.2 under Red Hat Enterprise Linux 5, along with an Oracle 10g Database on another server. Every time I try testing the form services us
-
Rented a movie for for iPad, said my cloud was full so I paid 20 for more space and still says it can't download because of lack of space
-
DLSMusicDevice Sound Bank menu greyed out
When I launch the DLSMusicDevice from an instruments Details view, DLSMusicDevice Sound Banks menu is grayed out, and displays the QuickTime Music Synthesizer in the grayed out menu. I do have a .SF2 file in the Audio/Sounds/Banks folder. What am I d
-
NI-8452 Stream Mode more than 64bits?
I hava an SPI ADC which I want to read using the stream API for high conversion rates (using the NI-8452) but want to read back all 7 ADC channels in one multi-read SPI command. The maximum number of bits that the stream API seems to support is 64 bi