MOPZ - yellow warning does not allow to continue with generation of package

Hello,
Using Solution Manager (SM) to generate package and stack configuration
file for upgrade.
XXH is an HR, 640, with dual stack due to XSS. In SM, converted the
product version from ECC to ERP 2004 using SMSY_SWITCH_PRODUCT, there is no inconsistency.
Edited to add product instances - Portal Content and Enterprise Portal to link to XKP (JAVA system with Adobe Document Services, Application Server Java and Enterprise Portal. It is now showing in SMSY with the following product instances.
- SA ECC Server
- Portal content, pointing to another JAVA system XKP
- SAP NW - Entreprise Portal - pointing to XKP also
- SAP XSS - pointing to XKP also
In MOPZ, selected XXH, 'Upgrade with EHP' --> EHP4 on NW701. It shows the following warning
Attention! Software Component Version ESA ECC-SE 501 is installed!
Attention! Software Component Version BI CONT 3.53 is installed!
Then selected several technical usages
- ESA ECC-SE
- SAP ECC Server VPack successor
- Central Applications
- HCM
- Portal Content
- Portal Content Self Services
- HCM Self Services
- Self Services
However after the calculation it sill show the yellow warning below and
does not allow to continue, even if I try other technical usages.
Attention! Software Component Version BI CONT 3.53 is installed!
Anything missing here?
Regards,
Terry

Hello,
The document 'How to install EHP4' has the following
...' If you are combining the installation of SAP enhancement package 4 with an upgrade, you have to register the system according to the start release.'
Since it was ECC 5.0 and converted the product version (using SMSY_SWITCH_PRODUCT), it is 'SAP ERP 2004'.
The MOPZ log below, the first 4 lines are coming out as red
15:07:30 Attention! Software Component Version BI CONT 3.53 is installed!
15:07:30 Please check the instructions under the logging tab.
14:56:36 Please check the instructions under the logging tab.
14:56:36 Attention! Software Component Version BI CONT 3.53 is installed!
14:36:53 Attention! Software Component Version BI CONT 3.53 is installed!
14:36:53 Attention! Software Component Version ESA ECC-SE 501 is installed!
14:36:53 Product version of system not suitable for Netweaver
14:36:53 Technical Usage SCM .
14:36:53 Technical Usage ESA ECC-SE .
14:36:53 Attention! Software Component Version BI CONT 3.53 is installed!
14:36:53 Attention! Software Component Version ESA ECC-SE 501 is installed!
14:36:53 Please check the instructions under the logging tab.
14:36:10 Component BI CONT 3.53 without suitable Product Instance <--
The last line could be causing the error, but has not found any way to resolve it in SMSY. Any idea?
Regards,
Terry

Similar Messages

Mail does not allow signed message with .Mac certificate

Hi all,
until a few weeks ago, I was able to send signed or encrypted message with my .Mac account and .Mac certificate. Both of them are still valid, and I can still read all messages I sent as encrypted and/or signed, however, Mail does not show the two buttons to crypt and/or sign emails. The certficate seems to work to encrypt iChat dialogs as well.
I repaired my Keychain, looked at how certficates were configured, everything seems normal to me.
Any clue ??

Well, it seems that we've come across something finally.
In comparing notes, my friend (who is currently able to sign and encrypt messages) and I were comparing notes on our respective certificates. In doing so, he pointed out that he'd noticed a difference in the PURPOSE of my cert versus his cert.
His cert shows the following purposes:
1 - Client Authentication
2 - Email Protection
3 - Apple .Mac Identity
4 - Apple iChat Signing
5 - Apple iChat Encryption
Whereas mine only shows these purposes:
1 - Client Authentication
2 - Apple iChat Signing
3 - Apple iChat Encryption
Another thing I noticed while comparing his cert to mine after he pointed this out...his cert is due to expire at the end of October. Mine, on the other hand, was created this past Friday.
Now, from what I understand, these certs expire one year from date of issue, unless they are revoked earlier. So, I suppose the big question to everyone else out there that is having trouble with using their .Mac issued certificates is "When did yours get renewed?".
I'm suspecting at this point that somewhere around the end of June the certificates issued by Apple for iChat signing suddenly stopped having the "Purpose" of mail protection. It would also seem that they suddenly stopped having the purpose of .Mac Identity.
Now I'm curious why Apple would do this, make it actually relatively easy to create a cert that could be used for iChat and Mail encryption, then suddenly take it away. Is this actually what has happened here?
I'd be really interested in seeing what the renewal dates are and the corresponding "Purposes" are for many of the folks that are reporting trouble with this very issue.
If you are one of those people who had mail encryption working using your .mac certificate, and it suddenly stopped working...feel free to post your cert information here.
To get the ball rolling, here's the information from mine...
Issued By:
- Apple .Mac Certificate Authority
Expires:
- September 14, 2007
Purposes:
- Client Authentication
- Apple iChat Signing
- Apple iChat Encryption
G4 800 (Quicksilver) / Powerbook 1.5 GHz Mac OS X (10.4.7)

OVi Player does not allow download music with prox...

Hello,
i've noticed that OVI Player deos not allow to download music when I am inside the firewall or under a corporate proxy. ANy idea if this is a restriction from Nokia Player or is it specific to my connection ?

Dear svenks,
If you scroll down the discussion topics, you will realise many other users are facing music download problem after upgrading from Nokia Music to Ovi Player.
Same for me, whether I connect my WinXP Prof 32-bit notebk behind my company firewall or at my home's ADSL broadband with Windows Firewall off, antivirus off, http://music.ovi.com set as trusted site, the downloading still fails.
Per advised by Nokia careline, I have already sent them a log file and now waiting for their investigation.
I wonder if anyone in the world is currently successful in downloading songs using Ovi Player. If yes, I would really like to know what PC configuration they are running under.
Richard

I want to reinstall firefox version 4; 5 does not allow google toolbar with credit card autofill

I am using FF 5 and want to use google toolbar autofill for credit cards. Google tells me it does not support version 5 for this add on.

Firefox 4 was replaced by Firefox 5 and is no longer supported.
*Security and stability issues in Firefox 4 will not be updated in Firefox 4; '''those issues have been fixed in Firefox 5'''.
*Only 2 Firefox versions are currently supported: Firefox 3.6.19 (support to end soon) and Firefox 5.
*Firefox 3.6.20 (replacing 3.6.19) and Firefox 6 (replacing Firefox 5) are scheduled to be released on 08/16/2011 (subject to change).
There are some suggestions in the articles that follow to replace some functions of the Google toolbar.
'''Google decided that they will no longer produce the Google Toolbar for Firefox beyond Firefox 4'''. 
Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

Jdev 12.1.3 OAF- MsgBundle warning does not allow edit of BC4J components

Hi,
I have a OAF project in JDev 12.1.3 which has only custom components for an extension to Oracle HRMS. While trying to edit a couple of EO and VOs, I am getting the following message. The rest of the EO/VOs are editable.
Warning: There are java errors for this object. The wizard will be read-only until they are corrected.
file:C:/Jdev10gR1213/jdevhome/jdev/myprojects/custom/oracle/apps/xxh/wde/schema/server/common/BatchAbsLinesEOImplMsgBundle.java
I do not have any such a java file in my project directory. The only file in the above common folder is bc4j.xcfg.
There was the following reference to this java in the EO.xml file (not sure where it came from though) and I have tried editing the EO.xml to remove this reference but this has not changed the warning and I am unable to edit the EO and VO using the wizard. Any help is appreciated.
MsgBundleClass="custom.oracle.apps.xxh.wde.server.common.BatchAbsLinesEOImplMsgBundle"
Thanks
Adi

HI Anand,
I have edited the reference to the MsgBundle class in the EO.xml but it has not helped. I then compared the EO.xml to some others and found that this EO.xml had the following extra line in the designtime area. Removing this line did resolve this issue.
<Attr Name="_codeGenFlag2" Value="Init|Delete|Access|DML|Val|Msg" />
But I am still facing the original message when editing the VOs for this EO. The VO.xmls do not have the above line.
Thanks
Aditya

You are not allowed to continue because your account does not have the proper privileges

I've been using PS since version 3. I currently run CS2 on Windows XP service pack 2. I've been using CS2 since it was first released. Now, all of a sudden, anytime I install or uninstall a program, whether it is related to Photoshop or not, when I start CS2 I get a window that says "You are not allowed to continue because your account does not have the proper privileges" and the program aborts. The first time this happened and after I had restarted CS2 for the 4th time it started normally. Since then it requires at least one restart (not reboot)after the error and then CS2 starts normally. Anyone have any idea of what is going on here? The first time it happened was right after I had installed a new HP AIO printer and I thought that may have had something to do with it. However, I have installed a couple of other programs and uninstalled another, none of them related in any way to CS2, and I get the error the next time I run CS2. I have found some posts about this but no answers, and most of the posts were related to Vista, not XP. I need help please.

there's a section in adobe.com (not adobeforums.com!) where after you log in (seperate log in from this site) you can go to "my account" and then "my registrations". you can manually add registrations there. that's how i've registered most of my adobe purchases.
ok. just ran through it:
go to http://www.adobe.com/ (make sure you have flash turned on)
click "Your Account" in the upper left corner.
log in with your adobe.com id, create one if you don't have one. this is SEPERATE from the id you log into this forum with!
click on "View Product Registrations"
click on "View Adobe branded products registrations"
if you have any registed packages, they'll be listed. at the bottom of the page click on the button that looks like this:

WARN [SchemaTypeCreator] JAX-RPC does not allow collection types skipping:

hi
I am trying web service,where it returns collection.
following is the code snippet,
 @WebMethod()
 public Collection<CustomerInfo> getAccountList()
 Query query=em.createQuery("from CustomerInfo c");
 return query.getResultList();
the problem is at the time of deploying i am getting following warning,
WARN [SchemaTypeCreator] JAX-RPC does not allow collection types skipping: customer.__JBossWS_CustomerRegisteration_EndpointInterfacePort_getAccountListResponse.result
i am using JBoss 4.0.5,it supporting JAX-WS RI 2.0_03-b24-fcs version.
could anybody tell me why this warning?
is JAX WS not able to resolve the collection type?
i tested my web service with webservice explorer provided myeclipse5.5 IDE,there web service returns null
please help me in this?

Hi,
I have a serious problem when i deploy a web service in JBoss 4.0.5
when i invoke the service i can't access to SSSSS222 beacuse in my client don't be created that class SSSSS2222....
I mapped schemas to java with jaxb2.0.5.
I'm using:
JAXB 2.0 .5
JSR181
My schema is:
<xs:schema......>
 <xs:element name="PPPPPP">
 <xs:complexType>
 <xs:all>
 <xs:element ref="AAAAAAA"/>
 <xs:element ref="SSSSS111"/>
 </xs:all>
 </xs:complexType>
 </xs:element>
 <xs:element name="SSSSS111">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="SSSSS222" maxOccurs="unbounded"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="SSSSS222">
 <xs:complexType>
 <xs:all>
 <xs:element ref="DDDDDD"/>
 <xs:element ref="DEDEDEDE" minOccurs="0"/>
 </xs:all>
 </xs:complexType>
 </xs:element>
</xs:schema>Error:
13:24:23,271 WARN [SchemaTypeCreator] JAX-RPC does not allow collection types skipping: com.java.SSSSS111.SSSSS222
A part of wsdl generated is:
<complexType name="SSSSS111">
<sequence/> *****error comparing with schema
</complexType>My web service is:
 @WebMethod(operationName="WS1")
 @WebResult(name = "Resp",
 targetNamespace = "http://www.example.com/resp")
 @RequestWrapper(localName = "validacionWS",
 targetNamespace = "http://www.example.com/pet",
 className = "com.java.ValidacionWS")
 @ResponseWrapper(localName = "validacionFWSResponse",
 targetNamespace = "http://www.example.com/resp",
 className = "com.java.Respuesta")
 public Respuesta validacionPeticion(@WebParam(name = "peticion",
 targetNamespace = "http://www.example.com/pet")
 Peticion peticion)throws MyException,Please, help me...

When i am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to keep typing. i have to keep clicking on the page to continue to type letter by letter...is there some function on that i don't know about?

When I am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to continue typing...i have to click in the browser to allow typing to continue...is there a function running that I don't know about?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

IPhone 3G ** key does not allow me to access my land line voice mailbox...

OK, I have a great iPhone 3G issue for you. Here it is...
In order for me to retrieve my voice mail messages on my office land line, I have to call my office direct dial phone number. After that outgoing message begins to play, I have to press ** on my iphone keypad to prompt the voice mail phone system to let me know dial my extension number and password. On my old iphone 2G, it works fine. But with the new iphone, it does not. Another words, when I press **, it does not allow me to the part where I dial my extension number and password. It instead instructs me to dial my extension number and leave a message (not enter my password). Possibly the ** tones from the new phone are too short? Not sure? There are two other people at my company that are having the exact same issue on their 3G phones as well. I even went to the AT&T store and tested it on the display iphones there. Same problem...

I was on the phone for an hour today with tech support. I spoke first to a tech support agent and next to an iPhone product specialist. Neither had heard of this issue, but I referred them to this thread and they now know it is an issue.
The product specialist tried to solve the problem and could not. He told me he was emailing the engineers to determine a workaround. He told me he would call me by Tuesday at the latest. His name is Richard and I will continue to update our progress in fixing this issue as I receive information.
If we can't access our land line corporate voicemail I don't see how I can keep the iPhone even though it otherwise works well and has many positive benefits over the Windows-based smartphone I was using (and may have to go back to).

System setting does not allow changes to be made to object

Hi experts,
I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
"System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.

Hi,
If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
Or you can find the text in the note:
«/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
Regards,
André Nunes

Quicktime does not allow to change video position from streamed video

I just wanted to watch the newest Apple event stream. For many ears I have watched them typically from Mac as they works from there perfectly.
Now I installed quicktime for Windows (without iTunes) and I watched 34 minutes from the event. Then suddenly the sound went off from the quicktime. I tought the system sound went and I checked the volume and other player and they worked fine.
Then I tought it was about streaming problem and I allowed it to continue to 39 minutes. Then I tought I could scroll backward to position where the sound went off. But I couldn't at all. I can drag the position slider somewhere, but it always jump back to the place where it is streaming. When I stop mouse, it jumps back to current position. So if I keep mouse cursor moving and dragging same time the slider, it moves.
Neither I can not start a video (any video, was they a trailers or Apple event videos) and jump to the known position to continue watching.
So to me if I would now like to watch the latest presentation, I should watch first 40 minutes again. As I am not allowed to rewind to wanted position.
I tried this on my laptop as well and I got exactly the same problem (the scrolling).
Is it really so that Windows Quicktime does not allow rewind/forward functions at all on quicktime videos?
Is there tweaks to get that possibility as I do not want to watch 40 minutes and be sharp when it comes so I can continue where I left and not miss the position and never could rewind back?

QuickTime Pro does not allow to make video capture from desktop - only from camera. How can i solve this problem?
Use the QT X.1 Player to capture desktop video. QT 7 Pro does not and never has had this feature which was first introduced in the QT X.0 Player.

Acrobat does not allow connection to a certain website

I have a PDF with a link to a pdf-file on a certain website. When one user clicks the link it says ( it is in dutch, so i try to translate):
Acrobat does not allow connection with www.XXXX (the name of the link where the link addresses to)
We work in Citrix, most users do not have the problem, only one user has.

Compare the Security (enhanced) and Trust Manager settings for yourself and the user on the same machine. If they are not identical, make them so. If that doesn't work,
I'm assuming the msg appears in a dialog and not the yellow msg bar.
Ben

Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI

Hello All,
We are unable to make PGI for Sales Order 2066904/10 because of wrong Serial Number Status.
Delivery note was created on the 22.12.2012 and then due to errors deleted on 27.12.2012.
Problem is that now we need to do PGI but Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI with Serial Number Status ESTO.
These 8 products are in Stock and available for this Sales Order, one of the Serial Numbers is with OK Status
8115001012
8115001057
8115001058
8115001079
8115001081 with OK status
8115001180
8115001181
8115001690
Please let us know how to correct the problem so we could do PGI for this Order?
This scenario is not replicable in RST(Quality System)
Our Findings:
** 1. We have tried IQ02>Edit>Special Serial No Functions>Manual Transactions>To Stock, But it still do not remove EDEL.
2. Is it suggestible to use T Code BS22 and thereby change PMS8 to Warning? I am not sure regarding this since this a SAP managed Table
Your help is highly obliged......This is very urgent..........
Regards,
Anirban
SD Consultant

Hi,
I have encountered same issue today and here is the solution:
1. Manually changed the status from EDEL/ESTO to ECUS
Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Customer", then save.
2. Once status is in ECUS, change the serial number status back to ESTO.
Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Stock", then save.
After doing the 2 steps above, you should be able to do PGI using the serial number.
Kindly advise if it works for you.
Regards,
Vhanie

I tried to update, but my apple ID does not allowing me , always giving me 'Your device or computer could not be verified. Contact support for assistance

I tried to update, but my apple ID does not allowing me , always giving me 'Your device or computer could not be verified. Contact support for assistance '. I changed my apple ID passwords, still same. help me please

Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Log out, log back in, and test. If there's no improvement, continue.
Step 2
Reset your computer’s PRAM.

Updated my phone, now e-mail will not send because server does not allow relaying

Updated iphone 3GS to iOS 5, now my company e-mail will not send "because server does not allow relaying". I'm just an employee, not an IT type - have no idea what this means and I'm very frustrated. Also infuriated with Apple because THEIR update caused this to happen, yet I have to PAY for their support because I have an older iPhone. Someone please help.

razmee209, thanks for your reply. After signing up for the community, I saw that I wasn't the only one. However, I think I've solved it by looking over the comments in reply to others with this problem.
First, I think the iOS5 update may have made the phone default to IMAP setting. I noticed when I deleted my account and re-set it up that there is a large button at the top for either IMAP or POP. It is already defaulted to IMAP, but my account must be POP. So this is the first thing to check when you're setting up your account.
Second, I noted some other comments about needing to supply a username and password to the outgoing server even though it says optional. I included those, but got a message that it wasn't recognized (or something like that) and did I want to continue anyway. I told it to continue. After a few seconds, it verified my account, and now everything works.
Hope this helps others having this problem.

MOPZ - yellow warning does not allow to continue with generation of package

Similar Messages

Maybe you are looking for