More 0 byte files on OES11

I've just migrated a 2.25 TB file volume from NW6.5SP8 to OES11SP1. Roughly 1.8 million files total and on the source there are 1,122 0 byte files (empty log files and other placeholders) and on the destination there are 10,755 0 byte files. No quotas on either volume. I know there were patches for this issue on OES2 but this is OES11. Anyone else seeing this on OES11?
Andrew

Originally Posted by aferris
I've just migrated a 2.25 TB file volume from NW6.5SP8 to OES11SP1. Roughly 1.8 million files total and on the source there are 1,122 0 byte files (empty log files and other placeholders) and on the destination there are 10,755 0 byte files. No quotas on either volume. I know there were patches for this issue on OES2 but this is OES11. Anyone else seeing this on OES11?
Andrew
Can't say as I have, although the only time I've ever seen it was with a quota (directory or volume). Can't remember what happens if the file was in use at the time either (if it just skips it or creates zero-byte files)
I've seen zero-byte files generated by people's auto-archive in GroupWise when they ran out of space, which of course, those would be copied over as well.
Doesn't mean there isn't a problem, just that I've only ever seen it due to space/quota issues.
What do your debug logs from the miggui show (assuming you used miggui)

Similar Messages

  • File adapter causes FTP process stop result 0 byte file.

    Has anyone ever heard that FTP adapter can cause FTP process to stop and end up with 0 byte file transferred?
    We use the normal ftp script to ftp file from external file server place file in XI inbound folder so that file adapter can pick them up from that folder.
    We have encounter a few 0 byte FTPed file in our system. One suspecting is the network between XI server and file server might get some interruption. With out just blaming on the network. We would like to know if there is any possibility that it is also causes by our file adapter? Says, it try to read the file that is not yet complete transferring make FTP give up transferring??
    We would like to know if FTP process is transferring the file over and file adapter try to read, what will happen? Will it read file with incomplete content and ftp still go on? Or will it stop reading and return back error as the file could not be open? Or it will force FTP process to let go the file??
    Best rgds,
    Thida

    Hi,
    ><i>We would like to know if there is any possibility that it is also causes by our file adapter? Says, it try to read the file that is not yet complete transferring make FTP give up transferring??</i>
    have not seen the file adapter causing any such problems. So, it looks like a network issue.
    ><i>We would like to know if FTP process is transferring the file over and file adapter try to read, what will happen? Will it read file with incomplete content and ftp still go on? Or will it stop reading and return back error as the file could not be open? Or it will force FTP process to let go the file??</i>
    Am not exactly sure, but when a file is being created and the file adapter tries to read such a file, the file would be READ and WRITE Locked and so File adapter should not be able to read such a file until the creation of the file is complete.
    Also, take a look at the note :  <b>821267</b> , question 31 for how file adapter processes empty file.
    Regards,
    Bhavesh

  • How to add more PDF file in to a designed form

    Hi,
    I have already designed a form and now want to add 2 more pdf file in to the form, how can I do that.
    Rgds
    Anver

    LiveCycle Designer and forms created using LiveCycle Designer can not do this. Just as PDF's created outside of LiveCycle Designer can not import forms created by LiveCycle Designer, but one can import the underlying PDF page without the form fields. The reason for this is that LiveCycle Designer creates an XML form with a minimal PDF page. The inclusion of the XML form data is enough to make the document not compliant to the PDF format. It should be noted that only versions of Acrobat 5.1 or above can process LiveCycle Designer forms, as these versions have had additional code added to the application to process the XML information.

  • Creating 1 pdf file from 2 or more pdf files

    Is it possible to combine two or more pdf files into one pdf file ?

    Yes, you can do this with our CreatePDF service or with our desktop application, Adobe Acrobat.

  • Much more PNG files in iWeb site and make it slowly

    I found that iWeb will change some text into PNG files, it cause anyone can not copy the text from my page, and make the page size bigger and slowly.
    And then, I don't know when iWeb will change text into PNG, when it will not. Sometimes when I write some words in the page, and publish, I can see the words are in text format, but when I continue adding words in it and publish again, I found that all the words has been changed into PNG.
    So, when a page loading in Safari, I can see much more image files in my page, but not text+image same as a normal web page.
    All that make the site loading very slowly. I don't like that if iWeb look like this.

    Instead of creating a hyperlink and then choose a file, put the pdf(s) on the server yourself first.
    Create a separate folder for them.
    Then determine the URL(s) to the file(s).
    In iWeb add a hyperlink *to an external page*. Use one of the URLs to the pdfs.
    Now you can update the pdf without iWeb.

  • Zero byte files not transferred with FTP Adapter

    All,
    I am seeing that zero byte files are not being transferred using FTP Adapter (SFTP type). Is there a known bug around this? Please respond if anybody have seen this behavior and resolved this issue. I am using 10.1.3.3.0
    Thanks,
    Dipal

    Thanks Marc,
    I still have doubt if that is the case. When I tested the same from 10.1.3.3.1 windows platform and FTP being windows OS zero bytes files transferred OK. Do you think this is to do with OS or SOA version?
    Thanks,
    Dipal

  • Copy doesn't work and creates zero bytes files that I can't delete.

    After installing Yosemite (I am now using version 10.10.1) I had problems copying files.
    Sometimes (not always) it doesn't copy files from a folder to another using the simple cmd-c cmd-v procedure. Even if both folders are on the desktop. It creates many empty files (white icons, zero bytes) named as my files, but the copy isn't happening.
    The main problem is that I cannot delete the files anyhow. If they are in a folder I can delete the whole folder and empty the trash.
    It doesn't happen everytime, but yesterday I had the same problem copying a few videos to the desktop and I can't get rid of them (because I obviously can't delete the desktop folder...).
    Can anybody help me? I need to be able to delete those zero bytes files that are now on my desktop.
    I tried to drag them into a folder but it wouldn't let me. As well, I tried to copy the same files to the desktop to see if they disappeared, but the new files copied were renamed with 2 (ex. I had the zero byte file called IMG_0705.MOV on my desktop. I tried to paste the same file and it appeared named as IMG_0705 2.MOV).
    I don't know what to do...
    Thanks

    Take it to an Apple store or AASP. How much it will cost will depend on their determination of the problems. To bad you didn't purchase extended AppleCare. No you don't get your money back for purchasing Lion.

  • FTP Interruption creates 0 byte file

    Hello,
    When I use a receiver file adapter to send an .xml file to an FTP server I will occassionally get a 0 byte file.  When I look in RTWB I see that the file initially failed and then succeeded on the first retry.  Since I am using a time stamp on the file, the file name changes and does not overwrite the 0 byte file.  How can I have PI clear up the old 0 byte file.
    I believe using Put File:  "Use Temporary File" will allow me to use a .tmp file but I'll still have a bad 0 byte file in the folder.  It will just be easier to recognize.
    Thanks,
    Matt

    Hi,
    Can below thing be useful?
    Select Handling of Empty Messages:
    ○       Write Empty File
    An empty file (length 0 bytes) is put in the target directory.
    ○       Ignore
    No file is put in the target directory.
    Help Link:
    [http://help.sap.com/erp2005_ehp_04/helpdata/EN/bc/bb79d6061007419a081e58cbeaaf28/content.htm]
    -Gouri

  • HT1355 How to send 2 or more pdf files in e mail

    How to send 2 or more pdf files in e mail...????????

    Also i have a workspace created in html.oracle.com in that when i want to upload excel file or copy data from excel i am getting error as......
    ORA-20001: create_table error: ORA-20001: Excel load run ddl error: ORA-01658: unable to create INITIAL extent for segment in tablespace FLOW_6868Looks like the data you're trying to load will exceed your workspace quota (2MB small, 5MB medium). Try loading fewer rows.

  • Drag and Drop image to desktop == Zero Byte File

    Drag and Drop image to desktop == Zero Byte File
    == This happened ==
    Every time Firefox opened
    == FireFox 3.6 OR Windows 7 64

    i have the same problem and Sun doesn't seem to have an answer to this question. The DnD works in Mac OS, but not on Window 2000/XP.

  • Join two or more xml files

    I want to join two or more xml files and create a nw xml or html file w/o using java!!
    Is it possible with only xsl. if yes how?
    Raju

    Sure it's possible with XSLT.
    Just use the document() function to refer to one or more additional source documents. I recommend using an <xsl:variable> to capture the secondary document in a variable so you can easily refer to it any number of times in the stylesheet.
    So, at the top-level of your stylesheet, just do:
    <xsl:variable name="otherDoc" select="document('otherDoc.xml')"/>
    Then anywhere you want to select nodes from the secondary document (will the full power of XPath), just start your XPath expression with the $otherDoc variable like this:
    select="$otherDoc/something/somethingelse[somepredicate-if-needed]"
    In this way you can combine the values of the current node in the main source document to lookup corresponding nodes in the secondary document and do joins this way.

  • Making more archieve file while refreshing materialised view

    Hi experts,
    i have created a materialised view and index on that, while refreshing it is making more archive files,
    how to stop making archieve while refreshing the Materialised view.
    i also opted nologging option on that,

    Hi experts,
    i have created a materialised view and index on that, while refreshing it is making more archive files,
    how to stop making archieve while refreshing the Materialised view.
    i also opted nologging option on that,

  • MPEG -2 Blu-Ray more accurate file size reading in Encore than H.264 Blu-Ray???

    Hi,
    I just read on Kenstone.com that if you encode a MPEG-2 Blu-Ray instead of an H.264 Blu-Ray, Encore will give you a much closer and more accurate file size reading.
    Is this true?
    Encore CS 5.1

    EdwurdAdam wrote:
    Hi,
    I just read on Kenstone.com that if you encode a MPEG-2 Blu-Ray instead of an H.264 Blu-Ray, Encore will give you a much closer and more accurate file size reading.
    Is this true?
    Encore CS 5.1
    They are all guesses anyway.
    H264 will get you more on the disc, as it is a much more efficient codec. Same quality in MPEG-2 will be twice the size, roughly.

  • Zero Byte Files

    When I ran a smart folder consisting of all files with Zero bytes, I got a dozens of them (including a lot in the preference folder).  Is this normal?  Should I be trashing any of these or do they serve some purpose?  I have a MacBook Pro running OSX 10.7.4.

    This turned out to be a user error. However, I realized this after fixing the error by deleting the follwoing files:
    Check if the issue exists with another user? Continue if the issue is not reproducible.
    Delete all the preferences from ~/Library/Preferences/*.*
    This fixed the issue. However, while deleting the plist files, I realized that the issue was as a result of bad task I created in Automator. The process was replicating the zero byte files. The issue could've been resolved had I traced my steps back to the time when I first saw the problem. Could've save me some time in customizing my desktop from scratch.

  • 0 byte files in /usr/bin

    Hello all,
    I just found a bunch of 0 byte files /usr/bin uname, unexpand and pubsub are just a few of about 50 files.
    Anyone know how I can restore those files?
    uname is needed to build som unix tool using MaxPorts.
    Thanks
    adi

    It should not affect your data BUT you should always back up your data routinely & regularly, whether or not you install anything. Computers & hard drives fail, sometimes catastrophically & without warning. The only way to protect yourself from this is to back up anything you can't afford to lose.

Maybe you are looking for