More abt xslt ...

i have one more doubt pondering on....
ie
creating a single xslt program template can be able to be used for various programming transformations in the future... or for each program we create we must create a xslt prog... for THE programs transformation.... is it necessary....

HI
GOOD
A SINGLE XSLT PROGRAM CANT BE USE IN VARIOUS PROGRAMM TRNSFORMATION IN THE FUTURE,THE XSLT FILE WILL BE DIFFERENT ACCORDING TO YOUR REQUIREMENT.SO FOR EACH AND EVERY PROGRAM YOU MIGHT HAVE TO RIGHT DIFFERENT XSLT PROGRAM.
I HAD GIVEN YOU SOME LINK,READ THEM CAREFULLY ,I HOPE YOU CAN GET SOME MORE IDEA ABOUT THE XSLT.
THANKS
MRUTYUN

Similar Messages

How to know more abt Bi 7.o

am working on bw 3.5 wish to know more abt Bi 7.o which blogs or web sites helps me to learn Bi7.o
pls replay
ramakrishna

Hello Rama,
There are lots of links for this
[SAP NetWeaver Business Intelligence Roadmap|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e044a9f7-e632-2a10-f6a3-d74831f01262]
[SAP NetWeaver 2004s Enterprise Data Warehousing|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10ac515c-a04d-2a10-799f-e1641a88ff49]
[SAP NetWeaver 7.0 Business Intelligence Upgrade Specifics|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742]
[SAP NetWeaver 7.0 Business Intelligence: Query Reporting and Analysis |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90bc0c7a-031d-2a10-d7a2-9047b4d1f43f]
[SAP NetWeaver 2004s BEx Web Application Designer: Working with Advanced Capabilities - Webinar PPT|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b085e86e-2353-2910-0c96-9f6ab693d0e6]
[New Business Intelligence Capabilities in SAP NetWeaver 7.0|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0fd6c18-d71c-2a10-7c9f-a359624d99b7]
Some blogs for BI7.0
[SAP Network Blog: SAP NetWeaver 7.0 BI: new DSO Write-Optimized DataStore"|/people/martin.mouilpadeti/blog/2007/08/24/sap-netweaver-70-bi-new-datastore-write-optimized-dso]
[SAP Network Blog: New Features in BI 2004s Process Chains|/people/mallikarjuna.reddy7/blog/2007/02/08/new-features-in-bi-2004s-process-chains]
[SAP Network Blog: Enterprise Reporting, Query and Analysis: An Overview of Design and Analysis Tools for Business Intelligence in SAP NetWeaver 2004s|/people/community.user/blog/2006/12/27/enterprise-reporting-query-and-analysis-an-overview-of-design-and-analysis-tools-for-business-intelligence-in-sap-netweaver-2004s]
[SAP Network Blog: SAP NetWeaver 2004s BI Authorizations for Reporting|/people/prakash.darji/blog/2006/10/09/sap-netweaver-2004s-bi-authorizations-for-reporting]
Thanks
Chandran

Abt XSLT tricky mapping

Hi Friends,
I am working on one scenario file to IDoc using XSLT Mapping.I have got the following query.
The file is obtained by the third party as xsd file.
This xsd file is mapped to IDoc.The xsd file contains multiple tax details (E1EDK04 seg) at the header level and multiple line item details at the item level (E1EDP01- E1EDP04 seg).
My query is, for each Tax header detail (E1EDK04), only one Tax Item detail /item detail should appear.
For ex:
E1EDK04(1) should match with E1EDP01-E1EDP04 (1) values. and so on.
IDOC
--E1EDK04 (1)
--E1EDK04 (2)
--E1EDP01
E1EDP02
E1EDP04 (1)
--E1EDP01
E1EDP02
E1EDP04 (2)
Currently I am getting structure as below:
IDOC
--E1EDK04 (1)
--E1EDK04 (2)
--E1EDP01
E1EDP02
E1EDP04 (1)
E1EDP04 (2)
--E1EDP01
E1EDP02
E1EDP04 (1)
E1EDP04 (2)
but the desired result is :
IDOC
--E1EDK04 (1)
--E1EDK04 (2)
--E1EDP01
E1EDP02
E1EDP04 (1)
--E1EDP01
E1EDP02
E1EDP04 (2)
E1EDK04 (1) seg to E1EDP04 (1)seg and so on for the above case using XSLT mapping..?
Thanks in advance for your help
Sam

Is there a specific reason why you are using XSLT mapping? You can go for graphical mapping and use node functions to acheive your result.

Abt xslt prog..

what these programs or translations ...
are these used for transforming the to and fro from xml to abap.... or the others... what is the need of such a transformation...
kindly discribe in detail about xslt ......
and xsl
regards,
bs

Hi Swami,
Extensible Stylesheet Language Transformation (XSLT) is based on XSL. While XSL transforms XML to HTML, XSLT is used to transform data content from one XML format and / or metadata tags to another XML format or tags. This XML transformation is often required for Enterprise Application Integration (EAI).
(The Extensible Stylesheet Language (XSL) is based on XML and is a recommended W3C standard. It separates the presentation of data from the data content. XSL is a transformation language that typically is used to translate XML data content to HTML - to be displayed in a browser. A single XSL stylesheet file can be used by many XML documents. )
Here are some useful links.
http://xml.coverpages.org/ni2003-12-17-a.html
http://www.topxml.com/xsl/tutorials/intro/xsl1.asp
http://www.topxml.com/xsl/default.asp
http://help.sap.com/saphelp_nw04/helpdata/en/4c/b2ad3de2d76b3be10000000a114084/content.htm
Regards,
Susmitha.
Dont forget to reward points for useful answers.

I want to know more abt the local xi in WEB AS =6.40?

Hi all,
Is there a local Xi in Systems which has webas >=6.40? if yes plz send me links , which gives more information regarding the same.
Thanks and regards,
Anil

Hi,
There is no Local XI system is available or No such demo pack is provided for XI.
Either you could have the subscription from SDN to deal with WAS 6.4 and PI for individual purpose.
https://www.sdn.sap.com/irj/sdn/subscriptions/development
but you can install on local computer for example the PCK to develop and test XI adapters.
http://help.sap.com/saphelp_nw04/helpdata/en/30/3ee23f671b0e5fe10000000a155106/frameset.htm
http://help.sap.com/bp_bpmv130/Documentation/PCK-Overview.pdf
I hope this can help you.
thanks
Swarup

Regd XSLT Mapping

Hi All,
I have a scenario where i need to use XSLT mapping, I would like you to provide docs/links from where i can get info abt XSLT mapping.
Thanks in advance
Shiva

Hi Thomas,
XSLT Mapping
xpath functions in xslt mapping
Design time Value-mappings in XSLT
File to Multiple IDocs (XSLT Mapping)
XSLT Mapping with java enhancement
XSLT Mapping With JAVA Enhancement ( For Beginners)
XSLT - Grouping XML with XSLT - From Muenchian Method To XSLT 2.0
Dynamically sending a mail to the PO creator using XSLT- ABAP Mapping -
Dynamically sending a mail to the PO creator using XSLT- ABAP Mapping
xpath functions in xslt mapping -xpath functions in xslt mapping
Lookups with XSLT - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
Using XSLT Mapping within the J2EE Adapter Framework -https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3823 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
Regards
Goli Sridhar

Where is XSLT mapper?

I was advised by PeopleSoft Tech Support (who now work for Oracle!) that JDeveloper contained a utility for creating XSLT. There directions were to right-click the project, expand General, select XML, then select XSLT mapper in the Items list. Problem: XSLT mapper is NOT in that list, and I did not leave anything out when installing (Studio 10.1.3.0.3.3412)
Essentially I have an XML interface file that I generate out of PeopleSoft Financials - and I have an XML file that my non-PS client wants to receive. There is a gap between - ok, a chasm - and apparently this XSLT mapper enables you to drag a field from one file into the other & it will generate the XSLT code for you.
Can anyone shed some light on where this tool is? Thanks!

Paul, this is not in the EA1 realese of JDeveloper 10.1.3.
Something like this is suppose to be part of the BPEL extension to JDeveloper 10.1.3 production.
There are other "more manual" XSLT capabilities in JDeveloper right now.
See here:
http://www.oracle.com/technology/products/jdev/101/viewlets/101/xsltdebug_viewlet_swf.html

Who knows about xdk: xslt vm and xml pipeline processor

hello,
i read anywhere that xslt vm and xml pipeline processor is
part of the xdk.
i would know more about xslt vm and pipeline processor,
but where ??
thank you!!

Hi,
XSLT VM is a high performance XSLT transformation engine in C.
XML Pipeline Processor specifies Java processes to be executed in a declarative manner. W3C recommendation is at http://www.w3.org/TR/2002/NOTE-xml-pipeline-20020228/.
Both of these are supported by Oracle in XDK 10i. More information at http://technet.oracle.com/tech/xml/xdk/content.html. Documentation at http://otn.oracle.com/docs/tech/xml/xdk/doc_library/Beta/index.html.
Thanks.

Want to know abt routines which we mainatin in pricing.

Dear Sd gurus
I have one query like is there any link betn routines & condition catagories as we maintain11 as profit margin rountine in atl cal type field & we define condition type on cond catagory i.g internal price for cost cond vprs. so plz put ur valuable views in the same.
& want to know more abt routines & links of the same
Regards

Hi,
This document will help you: http://www.saptechsolutions.com/pdf/InsideVOFM.pdf
Regards,
Eduardo

Abt pricing (Alt Cal & Base cal type

Hi gurus,
I want to know more abt alt cal type & base cal type.
I know that we use base cal type for frieght cond.
Want to know more abt the same.
Thanks in advance
regards
nitin

The alternate base value is used as the calculation basis only, while the alternate calculation is used to modify the final value.
*For example *
imagine you have a condition type ZZ01, with a condition record maintained (master data) for $100. Now, condition ZZ02 also exists lower in the schema, but with a rate of 10%. The standard calculation would result in a final value of $110.
The alternate base value could say, "don't use $100 as the basis -- use the original price PR00 only, which was $90." Then, the final value would be $100 + (10% of $90) = $109.
The alternate calculation routine says, "ignore the 10% altogether. Instead, use an externally calculated 20%." Then, you end up with a final value of $100 + (20% of $100) = $120.
Put them both together, and you could end up with $100 + (20% of $90) = $118.
Now once again,
Alternative Calculation Type
Normally if you want to calculate a value you have to use a calculation type for determinating the value. This calculation type is either addition, subtraction or multiplication. Similarly SAP also has got a default calculation type in the control data of the condition type. There you have the options of either Qty based , Fixed Amount Based or Percentage based.
Here what happens is suppose if you define Your condition type that calculates the base price of a material on Qty based. Then the calculation will be done based on the quantity of the material. If the customer orders 10 Nos and you have maintained a unit price of 100 Rs for each material then the value determined is 1000 INR. Similarly if the discount condition type , you maintain the calculation type as %. This means if you maintain the value of 10 % in the condition record. Then this percentage is taken as the calculation type and the condition value is determined.
In some cases you have to forego the default calculation types and use the customer specific method for calculating a value. For ex if you are calculating the Freight charges for a Material . it depends on so many criteria like, the weight, volume and also the minimum amount etc etc, in those cases, you forego the default value and then use the alternative calculation type in calculating the condition value against the particular condition.
Base calc. type:
I think it is available in the V/06 screen for each condition type. This is the standard calc. type followed for any condition type.
Hope it is useful
Reward points if helpful...

Info Abt Rebate.

Dear SD Gurus,
I want to know some more abt rebate senarios.
what is manual payments & manual accurals doc. when we use them.
Please explain with some examples.
Regards
nitin

Hi nitin
Manual accurals - you can post accurals manually in two scenarios when you are going to pay for lumpsum amount and when you are going for accurals correction
when you enter the amount manually in VBo2 then a credit memo request is created . but these are not posted to FI as these are manual accurals and manual payments
Manual payments - When you click on the payment data tab in VBo2 then you can enter the value and the accural amount partially or fully and when you save a credit memo request is created . then you can do the billing and that accural amount is passed to FI
Regards
Srinath

Report on Contact attached data

Hi Experts,
I am working on CRM 2007 Employee Interaction center. we have a requirement to pull call attached data into crm and later pull it to BI from crm to make reports out of it.
So can anyone share a doc on how to pull contact attached data(CAD) to CRM(config steps) .
Thanks in advance.
Sudhakar

Hi Sudhakar,
Call-attached data is optional and comes in addition to data already delivered by the ICI-certified third-party CTI solution. This solution shoud already deliver on each incoming call - out of the box - caller number (ANI), which can be enough to have caller automatically identified.
In case you need additional information to help identify caller, or to gather information that caller has keyed in on his phone during an automated dialog (Interactive Voice Response), then you have the possibility to transfer this extra information from the CTI solution to your SAP CRM system via ICI interface.
What should appear in the CAD is something you have to define with the CTI vendor. Have you checked with your CTI vendor if they don't already have an analysis tool of IVR dialogs ?
Let me present the example of what we did during an integration with a Cisco CTI, used in a service scenario where callers refer to service requests (creation, inquiry):
We agreed with the CTI vendor that they set-up an IVR script where caller gets asked if he is calling about an existing service request or not. If yes, he is asked to enter the number of the service request. If not, he is asked to answer 2 questions that will already help the agent who gets the call to better qualify it. Relevant answers are also displayed in the IC alert area; they are clickable (e. g. to directly navigate to service request).
We then agreed on following xml tags:
<ItemAttachedData>
<Application id="SAP-IC">
    <CV01>+321234567</CV01>          caller number (CLID)
    <CV02>+327654321</CV02>          called number (DNIS)
    <CV03>1</CV03>               OPEN TICKET OR NOT
    <CV04>7777777</CV04>          TICKET #
    <CV05>1</CV05>               ANSWER TO QUESTION 1
    <CV06>1</CV06>               ANSWER TO QUESTION 2
    <CV07/>
    <CV08/>
    <CV09/>
    <CV10/>
</Application>
</ItemAttachedData>
In SAP CRM customizing, you can specify an XSL transformation to postprocess this CAD. It is interesting to note that SAP's implementation of the XSLT processor allows call of ABAP methods, where you can easily code evaluation of CAD, and even save CAD to a custom DB table.
If you want to learn more about XSLT and ABAP, I recommend following book; it is a good investment!
http://www.sap-press.com/products/XML-Data-Exchange-using-ABAP.html
Hope I made this topic clearer
Kind regards
Walter

In Multimapping how can we configure the Receiver , Interface Deter for BPM

Hi Friends ,
I am trying the the BPM scenario using Integration Process
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00 in the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
I am using a File Sender Adapter and Receiver Adapter .
It is Successfully picked up the File but nothing is happening after that .
I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
I have checked in SWWL my Integration Process Return code is "0"
The steps Which i have followed in BPM are
1. Block with Deadlkine branch and Exception handler( as TimeOut Exception)
Block Start and Block End as New Transaction
2. Inside Block infinite Loop which contains Receive step ( Actives the Correlation ) and Multiline Container element which appends the Messages with CollectMessage
3. Transformation Step
It creates the New Transaction and Interface Maping from CollectMessage List to New Mesage
4. Send Step
It sends the New Message . It creates the New Transaction .
Can you Please tell me how to configure the Receiver and Interface Determination for the above scenario ?
Regards.,
V.Rangarajan

Hi Ranga
have a look at these
you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm
if useful pls reward

Using iPlanet Web Server 6.0 (with ASP or JSP), is it possible to create a StarOffice, Word or Acrobat document using a template and merging it with data from a database (say Oracle)?

Hi,
It is possible, But it has to be done through codes and iPlanet Web Server has nothing to do with it. But if you want to create the word document by ASP you have to install ASP plugin like ChilliASP (from Chilisoft) with iPlanet Web Server.Merging with database can be done through your code.
To know more abt creating word doc through ASP try this link
http://web.ukonline.co.uk/vance/code/aspworddoc.pdf
Regards,
T.Raghulan.

Receiver determination in BPM ..what is used for?

Hi everyone.
I've never used 'receiver determination' step in a BPM. I want to know what is used for.
Regards,
Inigo.

you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm

More abt xslt ...

Similar Messages

Maybe you are looking for