More Administration with Airport Extreme?

I recently purchased an Airport Extreme and I was wondering if there was any way to be more administrative with it? I don't mind using 3rd party software.
I'd like to be able to remove others from my network without having to change the network password.
I'd like to be able to limit the time span for usage on the network for certain users. (Only able to use the network between certain times)
I'm not an expert when it comes to networking, but if any of this is possible, I'd appreciate some feedback.
Thank you!

The Timed Access settings in AirPort Utility will allow you to control "who" connects to your network and "when" they can connect.
AirPort Utility >Click AirPort icon > Edit > Network tab > Enable Timed Access
For more information, click the Help menu at the top of the screen
Click AirPort Utility Help
Click Setting up a WiFi network,
Click Control when a user can access your network, and also
Click Control access to your wireless network.

Similar Messages

Automatic backups more on Drobo with Airport Extreme

Sure you can as I continue to help with your good type, with a similar problem though.
Silk for about 1 week alone makes my iMac 24 inch no automatic backups more on Drobo with Airport Extreme version 7.6.3 Connected via a USB cable. Went up a few weeks ago Actually getting rid of problem with the backup from Time Machine program of MAC OS X version 10.8.3.
I take a can further help me secure forgive me my english is not my native language.

The Timed Access settings in AirPort Utility will allow you to control "who" connects to your network and "when" they can connect.
AirPort Utility >Click AirPort icon > Edit > Network tab > Enable Timed Access
For more information, click the Help menu at the top of the screen
Click AirPort Utility Help
Click Setting up a WiFi network,
Click Control when a user can access your network, and also
Click Control access to your wireless network.

Manage more than 20 Airport Extreme, model A1354 in same broadcast domain

Problem: manage more than 20 Airport Extreme, model A1354 in the same broadcast domain), firmware 7.5.1
We have more than 20 Airport Extreme (A1354) in the same broadcast domain with firmware 7.5.1, now we can not manage them anymore (with airport Utilty)
(Reading the Airport Extreme configuration...) An error occured while reading the configuration. (-6753). When moving one airport to another VLAN, there is no problem anymore. (only if we put more than 20 basestations in the same VLAN)
With the old type basestations (firmware 5.7) there is no such problem! But we need the new one, can you confirm this problem and will there be a solution ?
Client OS: 10.6.3 (Build 10D578)
Airport Utility: 5.5.1 (551.19)
Airport Extreme Base Station, Model Number: A1354, Firmware 7.5.1
LAN: Private Lan /23 network
Al clients have a dynamic IP adres, the Airport have a static IP adres (true ISC dhcp @3.1.2_0 server), we use bridge mode.
We use SNMP, to monitor the airports (Nagios and MRTG)
With Regards,
John

Welcome to the Apple discussion area!
Your post appears to have specific questions directed to Apple. This is a user to user forum and there is no assurance that Apple will see your post. Even if they might, they do not respond on this forum
Your best bet would be to contact Apple directly on your issue.

Scanning with Airport Extreme

Just set up my new Airport Extreme, printing is working fine but I can not scan. Is scanning supported with Airport Extreme?
MacBook Pro Mac OS X (10.4.9)

from looking through the discussion forum more closely I found that is probably the issue...printing only and no scanning. A bit of a disappointment as I do a fair share of scanning. Seem interesting to have to wire-up for a function when wireless is so convenient.
Anyone think that this will change?

Help! iMac would not Connect/Find with Airport Extreme

Strange issue. I used to connect my Airport extreme with iMac, until recently iMac could not join with aiport. Instead my iMac connected to my neighbor's network. I'm using Time Warner cable.
However, my MBP and my Dell laptop could connect to my airport. Any ideas what could interfere with my iMac? I already called the Tech support and even went to the Apple store, they all said is the iMac since the iMac was able to connect with all the airports at the store. The tech support suggested me to move my airport to a room with less interference. Is that right? the iMac or the airport should I move?
We spent 2 hours, resetting back to factory setting and still iMac could not join Airport Extreme.
Any suggestions or advices are appreciated.
Tom
iMac Mac OS X (10.4.10)
Mac OS X (10.4.10)

Thank you for your e-mail, Duane. Yes, the airport express (hooked up to my stereo in the dining room) does receive iTunes from my G5 in the office. The light is a blinking yellow, but it still receives the signal.
Last night, I was able to get an internet signal on my eMac (with airport extreme card installed) from the VersaLink router that my G5 uses in the office!
I figured out that the eMac and G5 were obviously not communicating with each other, and went to the Airport icon on the top of both screens to make sure that the Location Names were correct. I discovered that I needed to change the G5 from the Airport Express Location (stereo)to the name of the eMac location (Master Bedroom). Then I got the network connection. I suppose to play iTunes to my stereo, I will have to change the location, again, right?
Another comment: I was rather amazed that, after at least an hour and a half phone conversation with three different technicians, no one came close to this solution. And I'm paying for technical help (two years left on a three year contract)! Evidently, it is not common knowledge that a wireless router and an airport extreme card with mini-antenna can communicate? I came close to buying an Airport Extreme Base Station because I thought that I might need it!!!
So, I'm thinking I'm in the right ballpark but would welcome any more comments.
Thanks for listening.
Dave

Lost wifi connection with Airport Extreme.

Lost wifi connection with Airport Extreme. When I connect my modem directly to the computer I can access the internet, however as of this morning I am no longer able to access the internet via wifi on my airport extreme. I have been using airport extreme for 6 months or more and everything has been working fine.
When I diconnect my airport extreme and reconnect it I get wifi for 1-2 minutes working fine, but then i lose internet connection. According to airport Utility everything is setup and connected and working ok, but I still am not able to access any webpages over wifi.

I have the same issue, I'm getting droppeds from wireless constantly

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.

I'm looking for a list of printers compatible with Airport Extreme

My existing HP printer is not compatible with Airport Extreme and I want to be able to print from all of my Apple devices. I'm looking for a new photo quality printer / scanner / copier which will work wirelessly with all my devices.

Sorry, but there is no "official" list of printers that Apple provides that indicate which are fully functional with the AirPorts. One "unofficial" list has been maintained by iFelix and may be worth taking a look at.

Can I use powerline wireless adapters with airport extreme

can I use power line wireless adapters with airport extreme?

Can this work?
Yes
I read somewhere that powerline adapters are not compatible with Airport.
That information is not correct.
If the AirPort Extreme is already set up as your "main" router, you would connect a short Ethernet cable from one of the LAN <-> ports on the Extreme to the power line adapter.
Locate another adapter in the area where you want to use the AirPort Express and connect a short Ethernet cable from the adapter to the Express.
Configure the Express to "create a wireless network" using the same wireless network name, same security settings and and same password as the AirPort Extreme network and select the Bridge Mode setting for the Express so that it work correctly on the network.

Is anyone successfully using Netgear WN3000RP with Airport Extreme?

Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
I'm using Airport Utility version 6.1.
Can someone out there can let me know if they got this device working with their Airport Extreme?
Also, what are my other options to extend my range?

I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
A Visual Representation would be
ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

What printers are compatible with airport extreme

What printers are compatible with Airport Extreme so my PC, I-Phone and I-pad can all print wirelessly?
Thanks

You can only use AirPrint-capable printers to print from your devices > http://support.apple.com/kb/ht4356

Creating a bridge with airport extreme (base) and airport express

i am having trouble creating a bridge with airport extreme (base) and airport express. i got the airport express to connect to my network. Airtunes sees it fine. i have an iMac (running Tiger) connected to the airport express via ethernet which i was hoping to get internet on (the iMac doesn't not have built in wireless and i had a spare airport express). now the airport express is no longer visible to the airport setup assistant on that iMac. but, like i mentioned, Airtunes is working fine, and the light is green.
i'm new to the wireless stuff. i am sure i just missed a step. how do i get the iMac to connect to the internet via my airport express bridging to my airport extreme wireless network?
your help is appreciated.

You can do this with the equipment you have. Configure the AirPort Extreme base station (AEBS) to act as a WDS main base station and configure the AirPort Express (AX) to act as a WDS remote base station. That will allow you to use the Ethernet port on the AX.
Unfortunately WDS also causes the available wireless bandwidth to be cut in half.

What wireless adapters are compatible with Airport Extreme?

What third party wireless adapters are compatible with Airport Extreme?

I would suggest checking out some of the wireless USB adapters provided by Other World Computing (OWC). They have a number of models to choose from. The link is to just one of their offerings.

How do i set up time capsule to work with airport extreme base to extend wireless network?

i have a airport extreme base, how do i set up a time machine to extend the wireless network i have with airport extreme? i have also 3 airport express's connected to the same network to extend my wifi all over my house. thanks in advance.

Much better graphics, thanks.
You can leave the Time Capsule connected by Ethernet from the Linksys and configure for a "roaming" network as mentioned previously.
To do this, open AirPort Utility - Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as the AirPort Extreme
No check mark needed next to Allow this network to be extended
Radio Mode = Same setting as the AirPort Extreme
Channel = Automatic
Wireless Security = Same setting as the AirPort Extreme
Wireless Password = Same password as the AirPort Extreme
Confirm Password
Click the Internet icon, then the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and allow the Time Capsue to restart
Then power down the entire network
Wait a minute or two
Start the modem first and let it run a full minute
Start the AirPort Extreme the same way
Power up the switch
Power up the Time Capsule for a minute
Keep starting devices one at a time about a minute apart
Now, your computer will automatically pick up a wireless signal from either the AirPort Extreme or Time Capsule, whichever device is closer and providing the stronger signal.

Has anyone setup a Canon PIXMA MP500 Photo All-in-One with Airport Extreme

Hi,
This printer is fairly well rated but I don't know if its compatible with Airport Extreme and 10.4, and if so how difficult was the set up.
Also, if you can suggest a multifunction printer that works well with Airport Extreme and 10.4, I'd appreciate it.
Thanks,
MK

First, Only printing works for multifunctions connected to Airport Extreme/Express.
See this:
http://www.ifelix.co.uk/tech/1300.html
And read through the separate Discussions forum here for Airport Extreme/Express-connected printers.

More Administration with Airport Extreme?

Similar Messages

Maybe you are looking for