More disk permissions problems after updating to 10.5.1

After updating to 10.5.1, my hard disk shows more disk permissions problems. But for 10.5.0, there is only one permission problem which cannot be repaired.
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete

I'm also getting similar results:
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/jvm.cfg", should be 0, user is 95.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/classlist" , should be 0, user is 95.
Permissions repair complete
At least the progress bar is fixed
Mark

Similar Messages

Disk permissions problem after installing Leopard

Hi!
I performed a Repair Permissions after installing Leopard. Firstly, I noticed that this procedure took a lot longer than before the upgrade. I also received the following error messages -
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions repair complete
What does all this mean? How can I fix it?
Thanks.

You suggest I reinstall all of Leopard and then update to 10.5.1?
No. Download and install the standalone 10.51 updater without reinstalling the entire OS.
I found 2 Remote Desktop updates (Client and Admin) - version 3.2. Are these for Leopard?
Use the client version.
How will this help my problem?
Those are status messages. You don't have a problem.
(26178)

Disk Utility Problem after update itunes to 6.0.3

After undated itunes to 6.0.3, disk utility runs 1/4 and stopped with message "disk utility lost connection with disk management tool, and can not continue....."
and when i Trashed itunes and Disk Utility worked through ok this happed with itunes update 6.0.2 as well did not happen to itunes 6.0.1.
Any body got any ideas, please help!!!!
I'm using os x 10.3.9 runing on PowerBook G4 1.3GHz

Yinwa, see the workaround here.
Joe
Power Mac G4 Gigabit Ethernet Mac OS X (10.3.9)

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this

Anyone has any problem after updating to iSO 4.3.1 ?

anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.

My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it.

HT6147 Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem?

Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem? I lost my notes, calendar, songs, games+ more. I've tried everything to restore these, but it won't let me. HELP!!!!'

Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

Mythbackend problem after update

I am facing the following problem after updating mythtv.
The installed packages are:
sip03ds ~ $ sudo yaourt -Ss mythtv | grep installed
extra/mythmusic 0.21-3 [installed] (mythtv-extras)
extra/mythtv 0.22-3 [installed] (pvr)
extra/mythvideo 0.21-2 [installed] (mythtv-extras)
extra/nuvexport 20090413-1 [installed]
after updating mythtv the backend refuses to start. Even though is displays that it is starting normally:
sip03ds ~ $ sudo /etc/rc.d/mythbackend start
:: Starting MythTV Backend [DONE]
sip03ds ~ $
for some reason it shows that the backend is unavailable.
sip03ds ~ $ mythfrontend
2009-11-21 10:32:59.615 mythfrontend version: tags/release-0-22 [0.22] www.mythtv.org
2009-11-21 10:32:59.668 Using runtime prefix = /usr
2009-11-21 10:32:59.668 Using configuration directory = /home/sip03ds/.mythtv
2009-11-21 10:33:00.548 Empty LocalHostName.
2009-11-21 10:33:00.549 Using localhost value of htpc
2009-11-21 10:33:00.570 New DB connection, total: 1
2009-11-21 10:33:00.587 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:00.588 Could not open settings file /home/sip03ds/.mythtv/config.xml for writing
2009-11-21 10:33:00.588 Closing DB connection named 'DBManager0'
2009-11-21 10:33:00.631 ScreenSaverX11Private: Gnome screen saver support enabled
2009-11-21 10:33:00.667 DPMS is active.
2009-11-21 10:33:00.710 Primary screen: 0.
2009-11-21 10:33:00.719 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:00.723 Using screen 0, 1280x800 at 0,0
2009-11-21 10:33:00.823 MythUI Image Cache size set to 20971520 bytes
2009-11-21 10:33:00.824 Enabled verbose msgs: important general
2009-11-21 10:33:00.889 Starting mythlcdserver
QWidget: Cannot create a QWidget when no GUI is being used
2009-11-21 10:33:01.408 Connecting to lcd server: localhost:6545 (try 1 of 10)
2009-11-21 10:33:01.911 Connecting to lcd server: localhost:6545 (try 2 of 10)
2009-11-21 10:33:02.412 Connecting to lcd server: localhost:6545 (try 3 of 10)
2009-11-21 10:33:02.913 Connecting to lcd server: localhost:6545 (try 4 of 10)
2009-11-21 10:33:03.414 Connecting to lcd server: localhost:6545 (try 5 of 10)
2009-11-21 10:33:03.915 Connecting to lcd server: localhost:6545 (try 6 of 10)
2009-11-21 10:33:04.416 Connecting to lcd server: localhost:6545 (try 7 of 10)
2009-11-21 10:33:04.917 Connecting to lcd server: localhost:6545 (try 8 of 10)
2009-11-21 10:33:05.417 Connecting to lcd server: localhost:6545 (try 9 of 10)
2009-11-21 10:33:05.918 Connecting to lcd server: localhost:6545 (try 10 of 10)
2009-11-21 10:33:06.471 Primary screen: 0.
2009-11-21 10:33:06.473 Using screen 0, 1280x800 at 0,0
2009-11-21 10:33:06.475 Using theme base resolution of 800x600
2009-11-21 10:33:06.500 LIRC, Error: Failed to connect to Unix socket '/var/run/lirc/lircd'
eno: No such file or directory (2)
2009-11-21 10:33:06.500 JoystickMenuThread Error: Joystick disabled - Failed to read /home/sip03ds/.mythtv/joystickmenurc
2009-11-21 10:33:08.531 Using the Qt painter
2009-11-21 10:33:08.535 Removing stale cache dir: /home/sip03ds/.mythtv/themecache/MythCenter-wide.1280.800
2009-11-21 10:33:08.557 Loaded base theme from /usr/share/mythtv/themes/MythCenter/base.xml
2009-11-21 10:33:08.891 Loaded base theme from /usr/share/mythtv/themes/default/base.xml
2009-11-21 10:33:08.897 New DB connection, total: 2
2009-11-21 10:33:08.897 New DB connection, total: 3
2009-11-21 10:33:08.902 New DB connection, total: 4
2009-11-21 10:33:08.906 Current MythTV Schema Version (DBSchemaVer): 1244
2009-11-21 10:33:08.910 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:08.926 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:08.927 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:09.589 Desktop video mode: 1280x800 59.9125 Hz
2009-11-21 10:33:10.602 Registering Internal as a media playback plugin.
2009-11-21 10:33:10.958 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythmusic.so: undefined symbol: _ZNK15ComboBoxSetting9classNameEv
2009-11-21 10:33:10.958 Unable to initialize plugin 'mythmusic'.
2009-11-21 10:33:11.230 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythvideo.so: undefined symbol: _ZNK7Setting9classNameEv
2009-11-21 10:33:11.230 Unable to initialize plugin 'mythvideo'.
2009-11-21 10:33:11.248 MMUnix::AddDevice() Error: failed to stat /dev/bdi,
eno: No such file or directory (2)
2009-11-21 10:33:11.259 MMUnix::AddDevice() Error: failed to stat /dev/power,
eno: No such file or directory (2)
2009-11-21 10:33:11.271 Loading window theme from /usr/share/mythtv/themes/MythCenter/menu-ui.xml
2009-11-21 10:33:11.377 Loading menu theme from /usr/share/mythtv/themes/defaultmenu//mainmenu.xml
2009-11-21 10:33:11.381 Found mainmenu.xml for theme 'MythCenter'
Any ideas or logs where to check would be more that appreciated.
Thanks
Last edited by sip03ds (2009-11-21 09:40:36)

I removed all the plugins and reinstalled mythtv. Configured it as advised on the wiki (without dropping the database schema) but the server is still not starting up correctly.
I found out that the server is starting and and stopping when I run:
sudo /etc/rc.d/mythbackend start
when I start the front end, the front end cannot connect to the back end because it is unavailable.
in case I start the server manually:
sudo mythbackend
I am able to connect via mythfrontend and mythtv is working correctly. Any suggestions to change the daemon script ?
Last edited by sip03ds (2009-11-21 22:56:51)

Bluetooth problem after update to lollipop

Hi,I've recently updated my 6503 to Lollipop.Everything went smoothly and is working fine, except 2 issues - one solved, second NOT. FIRST (solved) - phone after update waked up and logged to 2G network, with no data transmission (despite it was turned ON). What was strange - my operator's network appeared in 'available network list' as separate 3 NETWORKS ( 2g, 3g and LTE) Switching manually to LTE solved it - now phone is switching between technologies automatically, data transmission is working fine. SECOND AND NOT SOLVED: I'm using the hands-free system built in my car ( mitsubishi lancer, 2008 ) . After update, phone failed to establish connection with it, even hands-free system remained as 'associated device'. OK ... I erased hands-free system from phone, as well as phone from car's memory. Paired devices again - starting procedure from car's side. Nothing better. Erased and paired starting from phone side. Nothing better.What I've observed more: phone after try to establish connection , phone in eye blink looses it. On list of available services of hands-free system (in phone menu ofc) , only 'phone sound' appears, while -as I remember but i'm not sure- before update more (2 or 3) services were detected . PLEASE HEEELP !

Re: Bluetooth problem after update to lollipop As above post, I am also experiencing problems with bluetooth on my Z2:- Phone connection is OK if Bluetooth is turned on the phone for " car is ready". Then I can make and receive calls.
- Playing music on bluetooth does not work after Lollipop 5.0.2 update on my car head unit. Previously connected and able to stream music on 4.4.4 Kit Kat with no issues, looking on web this is not a new issue with Bluetooth connection issues to devices since Lollipop came out so what the **bleep** is going on? I purposely bought a Sony TV, Car Head Unit and Soundbar to ensure everything worked together now the head unit that I only had fiitted in February does not connect which cost me £249!!! No issues connecting to TV or Soundbar but on HU it tries to connect then disconnects and BT Audio Icon on HU display greys out although phone is connected and icon highlighted as connected. I have cleared cache, unpaired and paired again, reinstalled 5.0.2 again through wifi instead of OTA but still the same. Car device: Sony XAV-602BTAndroid version 5.0.2Version: 23.1.A.0.726

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?

I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

Disk permissions problems

Hi. I am having persistent disk permissions problems that do not seem to be able to repair. This is what I am getting:
Verify permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "usr/bin/setregion" has been modified and will not be repaired.
Warning: SUID file "System/Library/Printers/IOMs/LPRIOM.plugin/Contents/MacOS/LPRIOMHelper" has been modified and will not be repaired.
Group differs on "private/etc/cups", should be 0, group is 26.
Permissions verification complete
Any suggestions. I know there is supposed to be no malware for mac, but could this be some?
Thanks, Shannon

Hi Shannon,
Do not worry about malware here.
This kind of message is generated when there is such a change in the software used by your computer's Mac OS X, that its library of permissions doesn't contain anymore the corresponding basis.
It is very likely that there is nothing to be repaired anymore as Permissions for the files mentioned in that log.
Anyway it is nothing to be worried about as malware or virus or such thing.

Disk permissions changed after switching off FileVault

Hi,
I found my disk permissions changed after switching off FileVault, nearly everything belongs to "system" now.
Can anyone PLEASE tell me what permissions are standard for
-Desktop
-Applications
-System
-Libary
ore doesn't it matter anyway ????
Thanks a lot...

Assuming you're just talking about the Owner being System then:
The owner of Desktop should be your user name.
Applications and System should be System. Since these are not in your Home folder these permissions would have been corrected when you ran Repair Disk Permissions.
The Library folder depends on which Library folder you are talking about. If it's the Library folder that's in the same folder as System and Applications, then the Owner should be System, as well. Again, if that is not in your Home folder, then the permissions repair would have corrected it.
If, however, it's the Library that's in your Home folder, then it should have your username as the Owner.
Filevault only affects things that are in your Home folder so turning it on/off doesn't affect permissions anywhere else.

More disk permissions problems after updating to 10.5.1

Similar Messages

Maybe you are looking for