More ethernet connections for airport express

I am looking to hook up an ethernet switch to an Airport Express to provide additional ports to connect devices such as a printer (which doesn't want to function consistently in Wi-Fi mode), and possibly a Blu-Ray player. Any problems with my thinking here?

As long as you have verified that the Ethernet port has been enabled on lthe AirPort Express, you can connect an Ethernet switch to the Express to accommodate additional Ethernet devices.
Keep in mind that your "Ethernet" connections will only support as much bandwidth as the wireless network allows. This will likely be far less than a direct wired Ethernet cable connection from the main router to the Ethernet devices.

Similar Messages

ITunes 10.6.3.25 on ethernet connection loses airport express speakers but iPhone 4 airplay works

Hi,
I have started experiencing a problem this past week (Aug 2012) that I see sometimes reported here. When I run iTunes 10.6.3.25 on a Win7 machine that is connected by ethernet to my router, the airport express speakers would regularly disappear. I can always connect to these airport express via airplay from my iPhone 4. In fact when the airplay speakers disappear from iTunes on the ethernet-connected machine, I can reliably make them reappear by turning on the Music app on the iPhone. But after a while the airplay speakers would disappear again. On a Win7 laptop connected via wifi to the network the same version of iTunes seems so far not to exhibit the same problem.
Has anyone discovered what the underlying problem is or found a solution?

I ran into the specific problem in another thread. There are more than 100 connections from the apple TV's to iTunes. You can do a netstat -a (windows or Mac), and verify the problem. iTunes is smart enough to stop allowing more than 100 connections but stupid to allow the ATV to create so many connections.
Now for what you really want! Set all of your ATVs to wifi only. Even setting the iTunes host to wifi might help also. I think that wifi is more unreliable, and forces connections to drop, keeping the count under 100.
I also turned off ip v6. That could help you also. I originally had problems on a Mac mini, and built a windows 7 box to try to fix the problem. The wifi trick worked on both platforms. Several of us have bug reports into apple. I have a wired house also, and am very angry to NEED to use slow wifi to overcome this problem. The ATV gen 3 has been able to keep up with 1080p over wifi, so it doesn't hurt too much. What really hurts is spending over 40 hours troubleshooting this bug.

Can anyone recommend an ethernet modem for AirPort Express?

Well I think I want an ethernet modem as I don't know the differences between those and routers or whatever. I just want to access my broadband ADSL Demon account wirelessly with my AirPort Express. I'm currently 'using' an XBridgeDSL bought from the Apple store, but it's proving unreliable (I constantly have to reset it by turning the power on and off). The only other one Apple sell which seems suitable is the D-Link but that apparently only works if one computer is using the connection. Any ideas?

The only true Ethernet Modem that passes the IP address to the Express is the X-Modem but unfortunately it is as yet still not available due to manufacturing delays. However you can use an ADSL Router by switching off the distribute IP addresses in the Airport Express. The only down side to that is that you may have to configure port forwarding rules in the router if you want to do iChat AV conferencing etc.

Best Compatible Ethernet Modem for Airport Express

Hi, I'm thinking about buying an AirPort Express. I've had one before but it broke. I used it in conjunction with a D-Link modem however it would not work well if i was running more than one computer. Basically I just want a modem that is easy to set up and works great. Any Ideas?
Thanks
Rob

Hi Thanks for your reply. Basically I want to create a wireless network with the airport express to run more than one computer off. so what else would I need? Previously I used the airport express and a D-Link 300-T ADSL Modem. However I had trouble running more than one computer off it.
Thanks
Rob

Wireless to ethernet connection using airport express

Here is what I have and what I wish to do. I have a Mac Mini intel duo with Airport extreme card Connected to road runner via a ethernet router. My wife has a window running XP with out airport extreme. Can I use airport express to share the internet with my wife's computer by using an ethernet cable from my wife's computer to the airport express, remotely to (another room). Utilizing my computer as a base station?

Fordmanduo, Welcome to the discussion area!
No that will not work.
The Ethernet port on the AirPort Express (AX) is active ONLY when the AX uses WDS to wirelessly connect to a network.
OS X's Internet Sharing (via Mac mini) is not compatible with WDS.

Password for ethernet, connecting with AirPort Express?!

I live in a student-house, and normally connects with a cable to the wall (ethernet). I´ve got a password from the University where I study, and have to use this to connect with the ethernet.
My question; Can I place the ethernet-cable into the AirPort Extreme, and make it work on my mac, even though there´s a password? (can I type in this password somewhere during the installation?)
I´m no good at this, and I´m really really tired of having to use the cable on my mackbook....

Okey, than I wont try no more...
Thank you so much!!

HT2497 do I connect my airport express to my modem via the WAN port and then connect to my imac via ethernet cable?

Do I connect my airport express to my modem via the WAN port and then connect from airport express to my imac with ethernet cable? Is that how you "hard wire" the connection? Because when I do that, I still can't get online. Thanks.

What is the make & model of your modem?
You pretty much stated the correct wiring. There should be an Ethernet cable connected between the modem and the WAN (circle of dots) port on the AirPort Express base station.
Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

Question re AEBS Connected to Airport Express via Ethernet

If I have an AEBS that is being used to extend the range of my wireless network, if I connect an Airport Express via Ethernet to this AEBS for purposes of itunes airtunes will this work and will the wireless network remain wireless-n?

Yes, it will.
You also have the option of (a) completely turning off the radio on the Airport Express or (b) leaving it on, and using it to create a b/g point of access to your LAN thus allowing you to run the AEBSn in n-only mode for your n-capable wireless clients.

Connect to Airport Express to use AirTunes via ethernet cable?

Hi,
Here's my setup and question: I am connected to the internet using the wireless network in my house. I want to also connect my computer to my Airport Express for AirTunes which is hooked up to my stereo in the computer room. Since I'm already connected to a different wireless network for internet, can I connect my Airport Express directly to my computer using an ethernet cable in order to run AirTunes?
Thanks!

Hi.
You don't need to do that. You can simply set the express up as a "client" allowing you to be on the network and/or airtunes and/or wireless printing.
Have a look at this post for the relevant info:
http://discussions.apple.com/message.jspa?messageID=5578616#5578616
---

Connecting Two Airport Express Via Ethernet

I have a unique situation in which I would like to connect two airport express via ethernet. Here is the situation: I can connect the first AX directly to the internet and set up a WDS for the second AX. Unfortunately, the second AX signal does not reach where I need it to go. I can run an ethernet cable between the two. Is this setting valid for a WDS? Or does the WDS have to be wireless? If I can set up the WDS using an ethernet, will the relay AX broadcast the internet wirelessly then?
Are there any specific settings I should know about?
Any help would be great.
Thanks in advance,
Debbie

I currently have an old snow basestation at this location. Can I plug an ethernet cable into it and connect it to the AX?
Yes that will work.
My understanding was that the older basestation could not do this?
I think you have it confused with extending a network wirelessly. That is not possible with the snow AirPort base station (ABS).

IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

What does any of this have to do with the Apple TV?

HT1515 do you need to connect the airport express to a router via ethernet or can it do it using wireless?

do you need to connect the airport express to a router via ethernet or can it do it using wireless?

There are 3 Apple routers....AirPort Express, AirPort Extreme and Time Capsule. Details here:
http://www.apple.com/compare-wifi-models/
Do you have one of these products in the living room?
If no, you can only use the AirPort Express by connecting to the router in the living room using an Ethernet cable at all times.

Connecting to Airport Express as speaker?

Trying to connect to airport express with my new MacBook Air and iTunes. I just do not seem to be able to din the right way to do this. Also, I used to see a choice of speakers on my old machines in the lower right corner of the iTunes window while playing music. I do not seem to havethat anymore. Any ideas> Many thanks in advance!

Actually, I did manage now. I must have done something wrong previously. Follow instructions with this link http://www.apple.com/airportexpress/setup.html. What may not be so obvious is the icon in the bottom right of the iTunes screen. It's the rectangle with the up arrow. It may have been different previously but it works and if you follow the instructions you may well find it works as in my case. The only thing I did differently this time is to "enable ethernet for airtunes" at least I think that is what it was called. I did not think that was necessary as I am using the WiFi but clicked it anyway just in case.
For me a case of "Less haste ...more speed".. I am now listening to my music.

Internet speed slows down when connected via airport express

Internet speed slows down when connecting via airport express. When connecting directly via the timecapsulethe internet speed is ok, when connecting via the airport express the speed slows down.What can I do to change that? Any suggestions?

Turn off the AirPort Express completely as a test, and move your computer very close to the location of the Express.
As I said before, the Express can only extend the bandwidth (speed) that it receives from the Time Capsule, so the speed that you see there with the Express powered off will be the fastest speed of which the Express is capable.
The Express will make the signal go further when it extends....but it will not make the signal go faster.
A good location for a device that extends wirelessly is a point that is about half the distance from the Time Capsule and the general area that needs more wireless coverage.
If you locate the AirPort Express too far from the Time Capsule or there are more than a couple of walls in the signal path, the signal will be very slow by the time that it reaches the Express....and the Express simply extends a signal that has already slowed down significantly.
If you already have the Express located about half the distance between the Time Capsule and general area that needs more wireless coverage, how many walls, ceilings or other obstructions are there in the signal path between the Time Capsule, the AirPort Express and the area that needs more coverage?
Often, due to obstructions, it is just not possible to achieve good performance when you try to extend a network wirelessly. The solution is connect the AirPort Express to the Time Capsule using a wired Ethernet connection.
There is virtually no signal loss with this type of connection, so the Express can be located exactly where it is needed and it will produce a much faster wireless signal in this type of setup.

HT1126 Can I connect the Airport Express directly to my wireless router?

The old owner of my house set the Air port for my use, gave me a password ... when I tried it, the password never worked.
DO not want to lose my old wireless system as it allows me to do more than just the Air Port.
should I reset the system?

can i connect the airport express into an ethernet port in the wall
I assume you are asking about obtaining an Internet connection here.
First, temporarily turn off the wireless on a laptop and connect the laptop to the Ethernet wall jack with an Ethernet cable. Can you log on to the Internet this way?
If yes, then you can connect an AirPort Express to this Ethernet port and configure it to provide a wireless signal for multiple devices.
If no, then you can connect the Express, but you will not have an Internet connection.

More ethernet connections for airport express

Similar Messages

Maybe you are looking for