More Exchange synch issues
I have recently acquired an IPhone 4 (not 4s). I have it synched with my corporate email/calendar (exchange). However, I am experiencing annoying issues.
If I accept a meeting request (either 1 time or recurring) on my desktop, the meeting shows up on my iPhone, however, If I view the meeting on the calendar, the options are there to accept/decline. Why? I've already accepted it.
If I accept a recurring meeting request on my IPhone, it prompts me to accept for either the current appointment (first in the list) or for all appointments. If I accept all then go to a date in the future and open the meeting request, the prompts are there to accept/decline? Why? I've already accepted it. If I then click the accept option, it will send a reply to the sender.
Is there a setting I'm missing that is preventing this from working as expected? Or is this a "that is just the way it was designed and I have to live with it" kind of thing?
My corporate email is the only account I have synched (besides icloud).
I found one post on another site indicting they had same issue, however, the solution they used is not my issue.
From the other site:
"To get the iPhone to recognize that a meeting request has been responded to in Outlook so it stops asking you to accept/decline, do the following in Outlook (This should work for Outlook 2003 and 2007, not sure about other versions): Go to Tools->Options->Email Options->Advanced Email Options. Look for the item called "Delete meeting request form Inbox when responding" and make sure it is selected.
If it was already selected then you have a different issue then I did. This has solved my problem 100%."
I already had the option selected, it was set up before I even had an iPhone.
Similar Messages
-
Checklist for Exchange Certificate issues
Checklist for Exchange Certificate issues
1.
Why certificate is important for Exchange and What are Certificates used for
Exchange is now using certificates for more than just web, POP3, or IMAP. In addition to
securing web services, it has also incorporated Transport Layer Security (TLS) for session based authentication and encryption.
Certificates are used for several things on Exchange Server. Most customers also use certificates
on more than one Exchange server. In general, the fewer certificates you have, the easier certificate management becomes.
IIS (OWA, ECP, EWS, EAS, OA, Autodiscover, OAB, UM)
POP/IMAP
SMTP
2.
Common symptoms for
certificate issue
Here we can see three different types of the certificate warning, mainly from the Outlook
side.
a.
Certificate mismatch issue
b.
Certificate trust issue
c.
Certificate expiration issue
3.
Checklists
In this section, checklists will be provided according to the three different scenarios:
Certificate Mismatch Issue
[Analysis]:
This issue mainly occurs because the URL of the web services Outlook tries
to connect does not match the host name in the certificate.
[Checklist]:
Firstly make sure how many host name in your certificate the certificate. Run “Get-ExchangeCertificate | select certificatedomain”.
Secondly, check the web services URLs which Outlook are trying to connect to. Run “Test Email AutoConfiguration”
In this scenario, you need to check the host name for the following services:
Autodiscover
EWS
OAB
ECP
UM
If any of the urls above does not match the one in the certificate, refer to the following article to change
it via EMS:
http://support.microsoft.com/kb/940726
1.
Do not forget to restart the IIS service after applying the changes above.
2. Make sure a valid certificate is enabled on the IIS service.
Certificate Trust Issue
[Analysis]:
For the self-signed and PKI-based (Enterprise)
certificates, they are not automatically trusted by the client computer or mobile device, you must make sure that you import the certificate into the trusted root certificate store on client computers and devices. On the other hand, Third-party or commercial
certificates do not have this problem. Most commercial CA certificates are already trusted because the certificate already resides in the trusted root certificate store. Because the issuer is trusted, the certificate is also trusted. Using third-party certificates
greatly simplifies deployment.
[Checklist]:
If it’s an Enterprise CA certificate, manually install the root certificate to the “Trusted Root Certification Authorities” folder:
If it is a 3<sup>rd</sup>-party certificate, first remove and reinstall the certificate. Check whether the Windows Certificate Store on the local
client is corrupted. If it still does not work, please contact the third-party CA support to verify the certificate.
Certificate Expiration Issue
[Checklist]:
When a certificate is about to expired, we just need to renew it by referring the following article:
Renew an Exchange Certificate
http://technet.microsoft.com/en-us/library/ee332322(v=exchg.141).aspx
To avoid any conflictions, it’s recommended to remove the expired certificate from the certificate store.
[How to set a reminder to alert the administrator when a certificate is about to expired]:
It’s easy to fix the certificate expire issue. But it should be more important to set a reminder before the
certificate expiration. Or there can be a large user impacts.
Generally, the Event ID “^(24|25)$” will appear in Application log when a certificate is about to expire.
If it’s not quite visible, we can refer to the following solution:
http://blogs.technet.com/b/nexthop/archive/2011/11/18/certificate-expiration-alerting.aspx
OWA certificate revoked issue
[Analysis]:
IE
includes support for server certificate revocation which verifies that an issuing
CA has not revoked a server certificate. This feature checks for CryptoAPI revocation when certificate extensions
are present. If the URL for the revocation information is unresponsive, IE cancels the connection.
[Solution or workaround]:
1. Contact CA provider and check whether the questioned certificate is in the Revoked List.
2. If not, check whether the certificate has a private key.
3. Remove the old certificate and import the new one.
Workaround:
IE Internet Options -> Advanced tab -> Clear the "Check for server certificate revocation"
checkbox.
4.
More References
Digital Certificates and SSL
http://technet.microsoft.com/en-us/library/dd351044(v=exchg.150).aspx
More on Exchange 2007 and certificates - with real world scenario
http://blogs.technet.com/b/exchange/archive/2007/07/02/3403301.aspx(Reported previous post with link to SIS package to moderator)
This is not the correct SIS package for the N73. The package shown is for S60 3.2 devices, but the N73 is not S60 3.2, I believe it is S60 3.0.
Most features may work with this SIS, but if you experience strange problems, try using the S60 3.0 version.
But there are no significant difference between 2.5.3 and 2.5.5 with regard to attachments. The only changes were with localization (languages).
At this point, try 2.7.0 which is out now:
http://businesssoftware.nokia.com/mail_for_exchange_downloads.php
Make sure to pick the right phone on the drop down list. It does matter! There are 4 different packages. This list makes sure you get the right one.
I have seen some issues with attachments not completing that seem to be carrier dependent. You can test this my using Wifi (if possible).
Message Edited by m4e_team_k on 28-Sep-2008 12:25 AM -
My project displays fine in PE8. No audio synch issues in the preview. After outputting the project to a quicktime movie withe LAN setting the audio becomes seems to run faster than the video, becoming more and more out of synch as the movie plays. Any ideas what might cause such an issue?
The Stream info in MPEG streamclip for files from both cameras gives me this info:
Bitrate: 30.31 Mpbs
Video Tracks:
DV/DVCPRO - NTSC, 720x480, 16:9, 29.9699999999999 fps, 28.77 Mbps
Audio Tracks:
16-Bit Little Endian mono, 48 khz, 768 kbps
I don't know if this helps. -
Outlook with Exchange connection issues
I am implementing a security policy which includes blocking all outbound traffic on the firewall of our network (Except normal 80, 443 etc). It seems
that if I apply this, some users aren't able to connect to exchange. This appears to be related to Outlook Anywhere. What ports would I need to allow to prevent this connection issue?Hi
As per the information and details provided by you, to solve the Outlook with Exchange connection issues, Please follow these steps: -
Microsoft introduced
RPC over HHTP as a better way for Outlook client to connect to Exchange. The MAPI connections still use RPCs, but they encapsulate those with an HTTP connection. Since that HTTP connection is secured using SSL, it is may be
more accurate to call it RPC over HTTPS. These connections only require connectivity
over TCP port 443, which as you know is assigned to HTTPS and is normally open by
firewall admin for web servers.
Outlook Anywhere wraps
Remote Procedure Calls inside an HTTP layer to allow connectivity with the Exchange server. This simplifies the firewall administration process requiring only
the SSL port 443 to be opened to the CAS (Client Access Server) instead of several ports to the actual Mailbox Server (MBX).
I hope this information will be helpful for you.
Thanks and regards
Shweta@G -
Exchange 2013 issues - (new send email Stuck in Drafts not send)
Exchange 2013 issues - (new send email Stuck in Drafts folder not send)
I am also having this issue.
server 2012 VM with exchange 2013. plenty of resources, more than recommended so cannot be a BAck Pressure issue especially as no clients are connected yet.
In the early stages of setup and testing, mail sent to other mailboxes worked fine in outlook 2007 and OWA but after a few issue that developed and are now resolved, any e-mail send within outlook or OWA just goes straight into the drafts folder.
I tried, DNS setting changes under roles, on the server, on DNS server, MX DNS records, increased resources, looked at received connectors, changed and even deleted send connectors as this is not required for internal mail. Tried changing authentication
types but then outlook won't connect to, staying with Basic Auth.
Have not been able to test inbound e-mail as this is going to replace a production server and is not ready, although I could probably simulate a route from another server and push e-mail to it. Will try tomorrow.
I have spent about 20 hours trying to figure this out and made probably 40 changes. Change, test, rollback etc. Been searching through loads of forums and technet sites all with no help.
All services are started, server has been rebooted several times.
It is also an AD server and has both Exchange roles installed. There is no reason why it should not work. This is so frustrating, we don't have these issues with the now end of life Scalix, or MDaemon or Zimbra. Pity the client wanted a Microsoft solution.
To be honest there are not a lot of things that cannot be changed in ECP although there is more under exchange powershell however I am not familiar with all the commands yet. I have resorted to watching training videos even though I am a seasoned IT Pro, although
not so much with exchange it seems.
I have seen many people have this issue on Exchange 2007, 2010 and 2013. Someone must know how to resolve this or find a work around?
So far I have an expensive solution the client has purchased that I cannot get running properly.
Aside from this issue, I really like the new Server 2012 and new Hyper-V.
I was about to install Exchange Server 2013 on a physical machine due to this f#ckin' issue. But a post for the DNS change has saved my life:
http://social.technet.microsoft.com/Forums/en-US/exchangeserverpreview/thread/04c0147b-f4e3-4041-a566-310854e71068/ (rafael9908's answer)
And thanks Jesper Bernle for excellent info provided by your link. -
MS Outlook 2003 and Iphone 2G calendar synching issues
hi,
I have just recently (after a very long IPhone download) am having synch issues. Some of my appointments are on the Iphone but not seen on Outlook. I read something about a com add in but when I tried to check this and add, my outlook didn't have this option. I am very aggravated!!!! I am in sales and have many appts during the day and now I am afraid I am going to forget one if i don't check both phone and outlook.. Please help!!!!
JanetThis is causing alot of problems no idea what percentage of windows users sync'ing with Outlook this is effecting but a lot of unhappy campers out there.
For a constantly updating discussion on this try an independent site:
http://getsatisfaction.com/apple/topics/myiphone_calendar_will_not_sync_with_outlook2007 Covers 2003 Outlook too. - (Scroll down to 16th July)
Apple although acknowledged the problem, now 2 weeks ago seem in no hurry to correct it, something to do with trying to sell MobileMe a cynic may say? Problem has mean't alot of businesses returning iphones, exchanging for Blackberries or just trying to revert back to their smartphones or ppc's.
This added to the problems of bluetooth handsfree kits not working with voicemail and 3G problems I suspect Apple are wishing they never released Firmware 2.0 and iTunes 7.7.
We are all hoping for a swift patch for this critical problem but then again we were doing that 2 weeks ago too... until then at least my XDA Orbit still works.
Repeating the appointment once so it is a reoccuring one day appointment has proved to work in the meantime - major pain though. I am testing Dionhall's fix at the moment, it sounds as if it is fixing the problem for most users. (See link above)
<Edited by Moderator> -
I'm having an issue where my Exchange email seems to stop working on a random basis. I have to delete my account and then re-add it in order to start receiving emails again. My gmail and google apps accounts sync just fine. I've checked with our IT department, and other users aren't having the same issue. My phone worked fine up until about a week ago. I deleted the certificate and re-installed it, just to be certain. Any thoughts? Any known issues I should be aware of? Anyone else experiencing this problem?
ThanksI'll have to check with the IT department. Unless they have upgraded recently, we are using exchange 2003 SP1. I'll also ask about the test account.
As far as I know, and as far as IT knows, I'm the only one using WebOS. The IT department only "supports" Blackberries & iPhones. I prefer the Pre, and as long as the exchange sync works, I'll stick with it.
I have had the issue happen again several more times. It isn't an "8 am" exactly issue. The other morning I received emails up until 9 or so, then stopped.
I have tried just re-entering my password and that didn't seem to work. Maybe I need to give it a little more time. Maybe I should change my network password and see if that makes any difference. Perhpas that is where the sync "disconnects". Since exchange email works for iPhone users, I have to think it is a WebOS specific issue, versus an exchange issue, or perhaps I should say a WebOS - Exchange connection issue, as opposed to an "exchange" issue.
I only asked about the logs because I was involved with a previous exchange sync issue and worked with the support techs several times, and they have asked for several logs. -
i purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be erased. Is that true? My ultimate goad is to be able to read the books on my iPhone as well. Thanks.
You should be able to copy them to your computer's iTunes via File > Transfer Purchases and you can then sync them to the iPhone (or you could re-download them directly on the iPhone)
-
Re: [iPlanet-JATO] More on ComputedColumn issue
Vladimir--
I'm going to answer this question without doing my full homework on it;
please let me know if I hit the mark or not. If I understand correctly, you
have a problem using a model for both UPDATE and SELECT queries because of a
computed column...correct?
If so, this issue is solved in JATO 1.2. 1.2 has an attribute in the field
descriptor to indicate in which type of queries a field should be used. You
can use this attribute to indicate that a field should only be used for
UPDATE queries, SELECT queries, or whatever combination of query types you
require. You can then define synthetic fields for use only during one of
the query types.
Does this sound useful in fixing your issue? A way around this in JATO 1.1
would be to create separate models for SELECT and UPDATE queries. The
SELECT model could contain all the fields for the joined query, but the
UPDATE model would contain info for only one table. The 1.2 feature simple
allows you to do the same using one model.
Todd
----- Original Message -----
From: "vivanov4114" <vivanov@b...>
Sent: Friday, January 11, 2002 8:12 AM
Subject: [iPlanet-JATO] More on ComputedColumn issue
We have a similar problem with do's ComputedColumn after the
translation as Kostas described in his detailed message #439.
We have JATO/iMT version 1.1. Is the resolution of this problem added
to the version 1.2 (or 1.2.1)?
I've tried to adjust the ModelImpl class based on the .sdo file
(using ComputedColumn attributes) for these fields and failed.
Whether I missed something else, or our situation is a little bit
different.
In our case the dataObject has one Computed Field from one table and
another Computed Field from another table along with joint between
these two tables and third one, and, finally, the whole stuff is
under the repeatable (with static fields bindings to these two
computed fields).
The modelImpl class after the translation (as in the #439) has the
same values "" and "." for ..._NAME and QUALIFIED_..._NAME strings
respectively (for each computed do's field).
I guess that we could meet extra problem with this (for manual
adjustment) because of there is no TableName attribute in .sdo file
for computed field (as well as there is no ColumnName attribute for
computed field). If ComputedColumn attribute (computed field) could
play a role of ColumnName attribute (regular case), what would be an
analog of TableName attribute for computed field?
The bottom line of this is as follows: we have a same
SQLException "Invalid Column Name"
from ResultSetModelBase.updateModel() as Kostas described. It causes
the problem for
RequestHandlingTiledViewBase.executeAutoRetrieving() method that
can't bind the proper Model.
Finally, beginDisplay() method from
pgXXXXPriorityCountTiledView.class throws exception and
jasper compiler brings run-time error (Tomcat 3.2).
Kostas, if this problem still exists for translation of such cases,
could you please post a fragment that fixed you original problem in
addition to the message #439 (just to be sure, that I haven't missed
something important).
Thank you very much in advance.
Vladimir Ivanov,
P. S. I've enclosed the excerption from the .sdo file for this
dataObject below.
Class "SQLObject" ;
Name "doPriorityCount" ;
DataFields {
0 { // first df is a computed column from the first
//table
Class "DataField" ;
Name "dfPriorityDesc" ;
ComputedColumn "MIN
(MOS.PRIORITY.PDESCRIPTION)" ;
1 { // second df is a computed column from the second
// table
Class "DataField" ;
Name "dfPriorityCount" ;
ComputedColumn "COUNT
(ASSIGNEDTASKSWORKQUEUE.PRIORITYID)" ;
2 { // third df is a regular df
Class "DataField" ;
Name "MOS_PRIORITY_PRIORITYID" ;
TableName "MOS.PRIORITY" ; // this attribute
// doesn't exist for ComputedColumn
ColumnName "PRIORITYID" ; // this attribute
// doesn't exist for ComputedColumn
DataCachingEnabled "False" ;
DataCachingDuration "0" ;
DataCachingMaxRows "200" ;
DataObjectType "Select" ;
Tables "MOS.ASSIGNEDTASKSWORKQUEUE,MOS.PRIORITY,MOS.DEAL" ;
SQLDistinct "False" ;
SelectFilter {
"MOS.DEAL.SCENARIORECOMMENDED" ;
"=" ;
"'Y'" ;
"AND" ;
"MOS.DEAL.COPYTYPE" ;
"<>" ;
"'T'" ;
SelectOrder {
"MOS.PRIORITY.PRIORITYID ASC" ;
SelectGroup {
"MOS.PRIORITY.PRIORITYID" ;
EnableEntireTableDelete "False" ;
EnableEntireTableUpdate "False" ;
SQLTextOverrideSelect "Partial" ;
SQLTextOverrideDelete "None" ;
SQLTextSelectJoin "MOS.ASSIGNEDTASKSWORKQUEUE.DEALID =
MOS.DEAL.DEALID
AND MOS.PRIORITY.PRIORITYID <> 0
AND MOS.PRIORITY.PRIORITYID =
MOS.ASSIGNEDTASKSWORKQUEUE.PRIORITYID(+)
AND MOS.ASSIGNEDTASKSWORKQUEUE.TASKSTATUSID
(+) = 1 " ;
For more information about JATO, including download information, pleasevisit:
http://developer.iplanet.com/tech/appserver/framework/index.jspTodd,
Sorry for the delay with the answer, I've tried to obtain JATO 1.2
and repeat the project migration to verify whether version 1.2 solves
my problem or not (actually, it is a pilot sub-project).
Unfortunately, I still have no 1.2 version.
Let me try to answer on your question without getting the results
with JATO 1.2. Your explanation sounds like version 1.2 is very close
to solve the problem. Actually, our situation is easier because we
have SELECT object only, not SELECT and UPDATE. For data integrity
the only 'Select' ND's do(s) have been used through the whole
project. The backend communication (update, delete) is provided via
EJB like (entity) Java classes.
My question is: could I define synthetic field with 1.1.1 version. By
the way, word synthetic reflects the possibility to construct the
field under certain SQL circumstances (SELECT, UPDATE, e.g.) or the
possibility to construct a `fake' field (for example,
CountColumn of a do) as well. If the later is true, could you please
give a brief idea how to create this synthetic field.
After the translation in the doPriorityCountModelImpl class we've
got:
public static final String COLUMN_DFPRIORITYDESC="";
public static final String QUALIFIED_COLUMN_DFPRIO
RITYDESC=".";
public static final String COLUMN_DFPRIORITYCOUNT="";
public static final String QUALIFIED_COLUMN_DFPRIO
RITYCOUNT=".";
(see my original post please with details, as well).
If this is not a problem for 1.2 please do not waste your time to fix
it for 1.1.1. I need to repeat my results with the version 1.2 anyway.
We have a number of similar idioms through the project. In this
particular case, the CountColumn that counts the field from another
table may bring problem for manual adjustment (see my original
notes). The whole SQL query is as follows (for this case):
SELECT MIN(MOS.PRIORITY.PDESCRIPTION),
COUNT(ASSIGNEDTASKSWORKQUEUE.PRIORITYID),
MOS.PRIORITY.PRIORITYID
FROM MOS.ASSIGNEDTASKSWORKQUEUE, MOS.PRIORITY, MOS.DEAL
WHERE MOS.DEAL.SCENARIORECOMMENDED = 'Y'
AND MOS.DEAL.COPYTYPE <> 'T'
GROUP BY MOS.PRIORITY.PRIORITYID
ORDER BY MOS.PRIORITY.PRIORITYID ASC
During the pre-handler activity (it is the part of our Object
Framework on the top of Netdynamics Object Framework) system passes
id (and mos.deal.dealid = XXX) to the do (select query). After the
run-time execution of this do the results are displayed on the screen
bind to the repeatable statics.
Thank you very much,
Vladimir
--- In iPlanet-JATO@y..., "Todd Fast" <Todd.Fast@S...> wrote:
Vladimir--
I'm going to answer this question without doing my full homework on it;
please let me know if I hit the mark or not. If I understand correctly, you
have a problem using a model for both UPDATE and SELECT queries because of a
computed column...correct?
If so, this issue is solved in JATO 1.2. 1.2 has an attribute in the field
descriptor to indicate in which type of queries a field should be used. You
can use this attribute to indicate that a field should only be used for
UPDATE queries, SELECT queries, or whatever combination of query types you
require. You can then define synthetic fields for use only during one of
the query types.
Does this sound useful in fixing your issue? A way around this in JATO 1.1
would be to create separate models for SELECT and UPDATE queries. The
SELECT model could contain all the fields for the joined query, but the
UPDATE model would contain info for only one table. The 1.2 feature simple
allows you to do the same using one model.
Todd
----- Original Message -----
From: "vivanov4114" <vivanov@b...>
Sent: Friday, January 11, 2002 8:12 AM
Subject: [iPlanet-JATO] More on ComputedColumn issue
We have a similar problem with do's ComputedColumn after the
translation as Kostas described in his detailed message #439.
We have JATO/iMT version 1.1. Is the resolution of this problem
added
to the version 1.2 (or 1.2.1)?
I've tried to adjust the ModelImpl class based on the .sdo file
(using ComputedColumn attributes) for these fields and failed.
Whether I missed something else, or our situation is a little bit
different.
In our case the dataObject has one Computed Field from one table and
another Computed Field from another table along with joint between
these two tables and third one, and, finally, the whole stuff is
under the repeatable (with static fields bindings to these two
computed fields).
The modelImpl class after the translation (as in the #439) has the
same values "" and "." for ..._NAME and QUALIFIED_..._NAME strings
respectively (for each computed do's field).
I guess that we could meet extra problem with this (for manual
adjustment) because of there is no TableName attribute in .sdo file
for computed field (as well as there is no ColumnName attribute for
computed field). If ComputedColumn attribute (computed field) could
play a role of ColumnName attribute (regular case), what would be an
analog of TableName attribute for computed field?
The bottom line of this is as follows: we have a same
SQLException "Invalid Column Name"
from ResultSetModelBase.updateModel() as Kostas described. It causes
the problem for
RequestHandlingTiledViewBase.executeAutoRetrieving() method that
can't bind the proper Model.
Finally, beginDisplay() method from
pgXXXXPriorityCountTiledView.class throws exception and
jasper compiler brings run-time error (Tomcat 3.2).
Kostas, if this problem still exists for translation of such cases,
could you please post a fragment that fixed you original problem in
addition to the message #439 (just to be sure, that I haven't missed
something important).
Thank you very much in advance.
Vladimir Ivanov,
P. S. I've enclosed the excerption from the .sdo file for this
dataObject below.
Class "SQLObject" ;
Name "doPriorityCount" ;
DataFields {
0 { // first df is a computed column from the first
//table
Class "DataField" ;
Name "dfPriorityDesc" ;...........................................
ComputedColumn "MIN
(MOS.PRIORITY.PDESCRIPTION)" ;............................................
1 { // second df is a computed column from the second
// table
Class "DataField" ;
Name "dfPriorityCount" ;
ComputedColumn "COUNT
(ASSIGNEDTASKSWORKQUEUE.PRIORITYID)" ;
2 { // third df is a regular df
Class "DataField" ;
Name "MOS_PRIORITY_PRIORITYID" ;
TableName "MOS.PRIORITY" ; // this attribute
// doesn't exist for ComputedColumn
ColumnName "PRIORITYID" ; // this attribute
// doesn't exist for ComputedColumn
DataCachingEnabled "False" ;
DataCachingDuration "0" ;
DataCachingMaxRows "200" ;
DataObjectType "Select" ;
Tables "MOS.ASSIGNEDTASKSWORKQUEUE,MOS.PRIORITY,MOS.DEAL" ;
SQLDistinct "False" ;
SelectFilter {
"MOS.DEAL.SCENARIORECOMMENDED" ;
"=" ;
"'Y'" ;
"AND" ;
"MOS.DEAL.COPYTYPE" ;
"<>" ;
"'T'" ;
SelectOrder {
"MOS.PRIORITY.PRIORITYID ASC" ;
SelectGroup {
"MOS.PRIORITY.PRIORITYID" ;
EnableEntireTableDelete "False" ;
EnableEntireTableUpdate "False" ;
SQLTextOverrideSelect "Partial" ;
SQLTextOverrideDelete "None" ;
SQLTextSelectJoin "MOS.ASSIGNEDTASKSWORKQUEUE.DEALID =
MOS.DEAL.DEALID
AND MOS.PRIORITY.PRIORITYID <> 0
AND MOS.PRIORITY.PRIORITYID =
MOS.ASSIGNEDTASKSWORKQUEUE.PRIORITYID(+)
AND
MOS.ASSIGNEDTASKSWORKQUEUE.TASKSTATUSID
(+) = 1 " ;
For more information about JATO, including download information, please
visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp -
Synching Issues with iphone 4/ itunes
When attempting to synch my iphone with itunes, the synch cannot progress past the "backing up" stage. Why?? Getting a bit frustrated now to be honest.
Every time I plug my phone into the computer, itunes informs me of the latest update required (4.3.5), but because of the synching issue, I obviously can't get the new update.
any help appreciated"iTunes could not back up the iPhone "Guru's iPhone" because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again."
The above is the error message I receive when trying to upgrade/ synch my iPhone with iTunes on my Laptop. I have the latest version of iTunes available (10.4.1) -
Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
I recreated the profile in outlook... same thing.
I created the profile with outlook 2013... same thing.
There is only one user profile setup in Outlook.
(I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
Does anyone have any ideas?So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
it IS going from your user)? -
Exchange Rate Issue ( Ditect & Indirect Quotation )
Dear,
Alll Experts.
I am stuck up at one level , that is Exchange Rate issue.
User is creating shopping cart in SRM, Local Currency is USD and the goods is ordering from Canada ( CAD ).
While doing this amount is getting calculated in - ( Negative ), And it is going to wrong approval for shopping cart approval.
When I see the TCURR table I am seeing there as negative sign in exchange rate because it is maintained in Indirect Quotation.
I want to calculate the same amount in postive figure.
How this can be achieve? If I maintain the same in direct quotation it will calculate positive but final amount will be bigger which is not proper one.
Experts guidance will be helpful.
Regards,
Sharvari Joshi.Hi,
I gave the OB08 entries, not sure if you wanted me to explain the logic. Here it is..
Maintain 'Indirect quotation' from Local currency(USD) to Transaction currency(CAD) and 'Direct quotation' from Transaction currency(CAD) to Local currency(USD).
Direct quotation is where the cost of one unit of foreign currency is given in units of local currency, whereas indirect quotation is where the cost of one unit of local currency is given in units of foreign currency.
Your local currency is USD:
- Direct exchange rate: 1CAD = 0.92819 USD
- Indirect exchange rate: 1USD = 1.08238 CAD
The following settings have been made in the standard system:
- Direct quotation: ' '
- Indirect quotation: ' / '
Direct exchange rates do not have a prefix.
Your local currency is USD. You enter a business transaction in the transaction currency CAD. Until now, you had to use direct quotation to enter the exchange rate (1CAD =0.92819 USD). If you have defined '/' as the prefix for indirect quotation, you can also enter the exchange rate with indirect quotation (1 USD = 1.08238 CAD) by entering '/1.08238' in the exchange rate field.
Direct or indirect quotation can be maintained as the standard form of quotation for a certain currency pair. You use:
- '1' for direct quotation
- '2' for indirect quotation
If a standard form of quotation has not been specified for a currency pair, the system automatically uses direct quotation.
You make the settings in the IMG: General Settings -- Currencies -- Set Standard for Direct/Indirect Quotation per Currency Pair.
Thanks
Ganesh -
The recent software update on my HTC One has caused errors with Exchange ActiveSync issues. Calendar, mail and tasks sync fine but contacts won't sync. How do you correct this?
I had the same problem. Here is what worked for me. Open the mail app and delete your exchange account (Settings > Delete Account). Then re-add your Exchange account. After this my Exchange contacts showed up again.
-
Hey all. I have a queation regarding 12 bit audio synch problems. I have digitized a tape recorded with 12 bit audio and am just now coming into video/audio synch issues and was wondering if anyone might have a workflow suggestion. Soecific questions are -
1 - Can I export the troubled clips to quicktime/ resample them at 16 bit and reimport?
2 - Some of the clips I already have edited and are in synch, do I need to correct them as well or will final cut do that on export?
3 - If I get a 12 bit/16 bit mixed bag on my timeline, can I export the mix to 2 track and convert before exporting it to compression?
ANy suggestions on how to work through this would be appreciated. I seem to have a lot of people coming to me with this setting and would like to know of any viable workflow solutions.
Thanks1. Yes. Quicktime Pro, iTunes or third party audio editing software such as Peak can resample to 48khz/ 16 bit.
2. It would be best if you can get everything in the timeline to be 48khz/16 bit.
3. See #2.
Dope slap these fools who bring you 32khz stuff. Charge them MUCHO extra for your time.
x -
Hi,
So I have a .mov source file that contains footage captured from a Sony MiniDV camera (don't ask me why we were still using that in November of last year) and I believe I possibly screwed up the capture settings. The footage is 50 minutes of uncut interview and the audio gradually falls out of synch so that by the end it's about a half to a full second slower than the video. We need to edit the file simply to trim the ends so we have a clean fade in and out.
Here's the info on the file as displayed by the Finder
I imported it into Premiere Pro CS6, put it onto a sequence, and clicked "change sequence settings" to match the clip settings.
Here are the resulting settings:
I unlinked the audio track and moved it so that the sound of the two people high fiving was synched with the video. I cut both the video and audio tracks at that frame, deleted what came after the cut, and moved the audio back to its original position. I then looked at the duration of the video track, and adjusted the duration of the audio track to match. The result was that the audio speed was adjusted to 100.03%, and appeared synched throughout the video.
I thought I had solved my problem; however, when I exported the video the audio went back to falling out of synch slowly, exactly as it does in the source file.
I exported it initially as Format: H.264, Preset: NTSC DV. Then I exported it as H.264, Youtube HD 720p 23.976. Neither worked. The sample rate for both was 48 kHz, so unless I am mistaken, that matched the rate from the source audio.
This is beyond my technical ability and I don't know where to begin fixing it at this point. I no longer have the tape that the footage was on so I can't recapture it. How do I synch the audio and video?
Any help would be much appreciated.
Thanks!
CollinYes, the second export that I tried was with the Preset that is YouTube HD 720p 23.976. I've done this before with DV footage and it works fine, all that happens is that there are two thick black bars on the sides of the video. I only did this for one of the exports on this particular project though. The first time I tried to export it it was with the NTSC DV preset, and the synch issue was still a problem. So it is independent of the pixel ratio.
Maybe you are looking for
-
Path Selection for Routes Across MPLS Network
Customer hub site has two CE routers with two links connected to two seperate PE routers in the Carrier's MPLS network. At the customer's remote site one CE router on a single link is connected to PE router in MPLS network. How can I configure the CE
-
Photoshop Elements 6 compatibility with Mac OS X 10.7 Lion
Has anyone tested PSE 6's compatibility with Mac OS X Lion? Thanks in advance.
-
JS CS3 import external data into Dialog.
I would like to create a dropdown in a dialog that is populated by either an XML or txt file. Can this be done? First an xml or txt file would be created listing all the current products we do. This would sit on a server. The InDesign script would re
-
Upgrading to cs5 question......extended vs. non extended
I have the cs4 extneded version...is it possible to upgrade to the NON EXTNDED version as i really do not need the extended???
-
hi all, whats the function module used to calculate the difference between two dates regards Suprith