More Faulty documentsfound than the tolerated 0000000000

Hi All,
When I am filling SD Billing Setup Table in Tcode OLI9BW Iam getting below error
More Faulty documentsfound than the tolerated 0000000000
Message no:M2222
I have gone though the threads present in SDN and found how to loade the data by ignoring faulty documents as below
1. Run statistical setup for SD Billing (transaction OLI9BW)
with these settings:
-- Name of run xxxxx
- New run? Yes
- Number of tolerated faulty document = 1000
2. Run it in background (F9), confirm setting in first screen, choose
immediate in second screen and save.
Next I have loaded the data and my reports are not matching.
Now please let me know where  and how to  see the faulty documents and how to reload corrected data.
Regards
Albaik

Hi All,
Thanks for your valuable inputs now I have realised my mistake ie I did not execute the job in back groung hence I want not able to see the error recors.
Hence I have Executed the job in Back groung as below and found the error record and got got it corrected.
First we need to give-- Name Of run--
ZRUN1
                                                Termination Date------13.02.2010
                                                Termination Time----
10:30:00
                                                No. tolerated faulty documents-----1
Next  click on F9 to execute the job in back groung.
Next got to SM37 to see the Job Log  and here we can see the error documents.
Regards
Albaik

Similar Messages

  • ORA-13044: the specified tile size is smaller than the tolerance

    Hi,
    I get the oracle error ORA-13044: the specified tile size is smaller than the tolerance when I do the following point cloud clip:
    8 sdo_geometry(2003,29903, null,
    9 mdsys.sdo_elem_info_array(1,1003,3),
    10 mdsys.sdo_ordinate_array(316504,316510,234084,234090)),
    However the bounds of my point cloud are
    316500 to 316511 and 234080 to 234092 and my tolerance during point cloud creation is set to 0.000015 (I have alterated this value before to make it smaller but nothing seems fit).
    Where do I set the "tile size"?
    The set consists of 100 points and blk_capacity is set to 50.
    Any help is really greatly appreciated.
    Cheers,
    F.

    Hi BKazar,
    thanks for responding.
    Yes, I tried out all sorts of things and swapped the numbers to see if that would fix the issue. It did not.
    I have found out now though what the issue was. When I loaded the data file into Oracle, the guy who gave me the file said that the first column is the longitude, but it wasn't. After switching sdo_point.x and y the error disappeard.
    I suppose the sdo_srid was expecting a different range and got confused because my long and lat were swapped.
    Cheers,
    F.

  • MSI Big Bang-XPower II More MB RAM than the CPU can handle...

     I understand reading in a few forum post :" By making more memory available to the system more data can be cached in RAM, so there will be less hard drive activity, and less swapping to memory so your system will perform better." But what happen when motherboard for a desktop that supports( and had install) more RAM than the processor can handle?(aka:processor Max Memory Size).
    Please comment in this configuration.as I 'm looking for a MB than offer me the more SATA6 connection i found a few available using LGA2011 socket (MSI Big Bang-XPower II LGA 2011 Intel X79 SATA 6GB/s USB 3.0 XL ATX Intel Motherboard with UEFI BIOS) than support 128GB. As I understand the processor Intel® Core™ i7-3930K Processor only work with 64GB.
     Is there any advantage to have a MB that hold a bigger RAM capacity than the CPU? If so, how can this be translate using in a program like Adobe After Effects, RAM preview? thank

    More Memory doe's not make it faster as its Volatile Memory (more RAM but it has to be run at much slower speeds) that is very short term and is just a buffer for active Programs and files it Caches there while its active but in no way improves system speed (as it has to be clocked slower to allow the IMC on the CPU to cope with it)! more memory just allows more Active Large programs and files open at the same time and huge amount of ram will only really be of benefit for things like Video Editing, photo editing and 3D rendering as those take alot of ram to allow all the computations that the CPU does to be held for quick access but only when they are active!
    having more RAM then your CPU can Handel is a VERY BAD IDEA as it will just refuse to even post or in very rare cases damage the CPU's IMC leading to a dead CPU!
    why MSI have done that is for possible later 2011 CPU's that may allow the 128GB of RAM limit to be used but currently they do not exist currently as X79 is a more professional grade Platform that will probably be around for years to come (may be used for many upgrade cycles and may eventually have a cpu that can use 128GB or ram) and who knows what will happen with Intel CPU's in that time frame! (more of a possible forward compatibility thing as its a very high end platform)
    as for after effects it uses RAM for  holding Render Files so in theory more ram will just allow it to render Larger files that are more complex without hitting the Available Ram ceiling that your computer has but it will not render any faster as a result it just gives it more headroom to work in!
    so overall more ram = more Active space available & no increase in speed (actually maybe a drop in speed as it needs to run slower causing LAG/Latency) so it all depends what is important to you here to whether more ram is of any benefit or just a hindrance but that is down to your own use case scenario!

  • Why does Magic Mouse use much more battery power than the keyboard?

    I have the Bluetooth versions of the keyboard and the Magic Mouse. I use the same rechargeable batteries in each. Yet the mouse has now come to the end of a THIRD set of AAs, while the keyboard still has 60% of its first set.
    Why? They are both constantly in use, so why does the Mouse drain batteries so much faster than the keyboard? Viz: the mouse about once a week (two, max), while at this rate, it will be another month or more before the keyboard drains.

    Actually I don't! I consider myself a 'power user' in that I will always use the keyboard first, and I learn keyboard shortcuts for nearly everything I do regularly.
    I would guess my use is 50:50 at worst?

  • I'm paying more on UW than the price listed on web...

    I am a Skype Unlimited World user since april 2009. I paid 224.28 on august this year for one year UW, but when I checked online today, I saw UW is only 13.99/month (167.88/year). 
    Then I request a refund on price different and I was rejected because once ths subscription has been used, it is non-refundable. 
    If Skype changes UW price and covered area, should current subscripers have right to cancel subscription and get the refund? I'm using auto payment, so I don't even know Skype changes UW untill I look today. Now I have to pay more money on a old UW (Skype claims this has more advantages), and can't swich my old UW to new UW and get a refund on price difference.
    This is not the right way to treat customers. 
    Here is the list of UW price from 2009. (This is in my payment history, I don't know when UW price is changed. Maybe I have been paying extra $50 for more than 1 year.)
    $12.95/month from 04/2009
    ($11.89/month) $142.68/year on 08/2011
    ($18.69/month) $224.28/year from 08/2012 to 08/2014
    $13.99/month now
    As you can see, when Skype increased the UW rate, they stared to charge me more. 
    Now the UW rate is lower, Skype still charge me higer rate and refuse to refund me the price difference. 
    Sounds like if price is higher, subscripers will be charged more; if price gets lower, subscripers will still be charged the same. I know Skype don't have right to prior contact customer before subscription change, but why strict customer update their subscription and get a refund on price difference? I'm a anual subscriper, I can't even get price difference refund for my next 8 month?

    Hi and welcome to the Skype Community,
    Skype constantly reviews the market situation and changes both scope and pricing of our subscriptions offered to new users based on this assessment. This means that an Unlimited World subscription purchased in 2009 has a different set of included destinations as well as a different pricing than the one we offered in 2012 or now in 2015. We do not automatically convert existing subscribers to new versions of the subscriptions because of that since we don't know if the user purchased a subscription to call into one of the countries or e.g. mobile numbers in a certain country that might not be included any more.
    In you case start by checking the list of included destinations in the subscription settings on your account page at www.skype.com/go/myaccount
    The check if the "2015 edition" of the Unlimited World subscription still includes the destinations you want to call. If tht's the case you can cancel your current one, wait for it to expire and then purchase the new one.
    The reply from Skype CS is correct also: If you started using a subscription we cannot refund you for that subscription.
    Hope this helps.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Sequential vs random disc access - is LR more of one than the other?

    I'm deciding on a new build for photoediting and based on what I've read will be going with some SSD drives (one for OS/apps, one for the LR catalog, cache, previews and LR/PS work area). Edited photos will be taken off the SSD for long term storage on HDD.
    Technical reviews on SSDs discuss their capabilities primarily in terms of random versus sequential read/writes.
    I understand that LR (and PS) make use of a mixture of random and sequential read/writes. Obviously applying a keyword to 35 separate images is going to be a random write operation, whereas generating a 1:1 preview in Develop seems to me more likely to involve sequential read/write.
    My question is this: under "normal" use (and I accept that there really is no such thing, but I am talking about what I expect the vast majority of users find themselves doing on a daily basis i.e. importing RAW captures, applying metadata, developing and printing), what would be the best way to describe LRs use of a hard disc? On the whole, is there more sequential or random disc access going on? More reading or writing?
    Thanks to any bright spark out there who can illuminate me...I've found it difficult to get a handle on this from the net.
    Dave M

    Lee Jay, random catalog and images sequential seems to fit with what I would imagine is the case but as clvrmnky points out there can be alot going on at the controller level too.
    Clvrmnky agree one can't generalize (in fact that's my concern about one user being only one data point), and your comments re good media, backups etc. are all good pieces of advice (as it happens ones that I took on board many years ago but still valuable to repeat in fora like this again and again).
    You do suggest keeping the ACR cache and LR catalogue on separate discs however. I had planned on keeping them on a 256 GB Crucial C300 SSD drive. What would be the advantage of keeping them on separate drives?

  • TS3700 There is more to this than the earphone connection.  If I tap the unit once the screen dims, it will continue to play.  But it shuts off if I don't.  What is going on?  It will also continue to play if I run the stop watch, for up to 6 minutes.

    How do I keep this from happening?

    And you are positive the headphones are plugged all the way in, meaning the white part of the headset is flush with the body of the Nano and no silver from the plug can still be seen.  If so, try another headset to make sure the current one isn't damaged/faulty.
    B-rock

  • Charging more for games than the price stated?

    i recently tried to purchase a game that was priced at £1.49 which I know I had in my bank (the bank confirmed this) however they tried to take out £11 for this game which I did not agree to pay, does anyone know why this has happened.
    now that it has declined my card I can no longer download any game free or otherwise as it says verify my card even if it's a free game.
    thank you

    Hello Mummy091113,
    Welcome to the Apple Support Communities!
    If you need to report a problem about a purchase you made through the iTunes or App Store, please use the information located in the attached article to complete this process. 
    Report a problem with an item purchased from the iTunes Store, App Store, Mac App Store, or iBooks Store - Apple Support
    Best regards,
    Joe

  • Rendered video is more washed out than preview

    I'm new to FCP but expanding from PC/vegas. In the latter the preview looks more washed out than the rendered output but there were ways to preview what your output would look like depending on whether it would be viewed on a tv or computer.
    My FCP output when viewed in QT isn't quite as saturated as my preview in FCP or compressor. The blacks aren't as deep nor are the colors as vibrant. I would say it's about 7-12% less "deep" as an estimate. I used compressor with the default youtube settings. I know there will be some loss in the conversion but the amount of color change I'm seeing seems to be more of a preview settings type of thing than a result of the export from the way it looks. Am I missing something or do I need to crank on my color settings a little harder?
    THanks, Billy

    Hi
    Me total Amateur - just thinking.
    How do You judge Your renderings etc.
    I don't at my Mac monitor but connected an A/D box Canopus ADVC-300 and this to a TV (ref. monitor)
    Here I see in real-time what I'm doing and if I'm satisfied with it.
    When burned to DVD - it is very close to this. (so is never the Mac monitor)
    Yours Bengt W

  • Several encrypted .dmg files show much more free space that the total size of the file.

    I have several encrypted .dmg files on my macbook air running OS X 10.10.1  I have had them for years with no problems. Now suddenly, in the finder, at the bottom of the finder window where it shows the number of items and free space for a disk, it shows more free space than the full size of the .dmg file. Typically it will show about 200MB for a 100 MB file. Obviously, this is a bug, but I can find no information or discussions about it anywhere.
    Does anyone have the same problem? Any ideas how to fix it?

    Thanks for the ideas. Unfortunately, it didn't work.
    I rebuilt the spotlight index as suggested.
    I tried it twice, rebooting the computer a couple of time along the way.
    Below you can see the actual file as it occurs in the finder in its unopened form.
    Now, below here is what the finder reports at the bottom of the finder window when the file is opened and added as a virtual disk.
    Note that the total file size is 102.5 Mb
    Yet the finder says it has 234.5 Mb free!
    The actual size of the files on the disk add up to about 60 Mb
    This occurs with several similar dmg files.
    Any other ideas or experiences would be appreciated.

  • IO Operation (read/write files) in IPAD AIR downgrade ~50% than the one in IPAD4

    Summary:
    UnZip the same file with the same native unzip method (native zlib) in IOS7, ipad air take +50% more time consumption than the one in iPAD4.
    for unZip, it main perform the IO read/write files in ipad, does apple air already changes the file system ?
    Steps to Reproduce:
    UnZIP a file with native zlip on both ipad AIR and IPAD 4 :
    IPAD AIR: 16GB
    IPAD 4: 16GB
    ZIP file size: 700KB
    Files in zip file: 225 files (120 files are images)
      after remove the images, the time on IPAD AIR will save 50% time consumption
    unZip method: the native zlib
    unzip time on IPAD AIR+ IOS7: ~1200ms
    unzip time on IPAD 4+ IOS7: ~800ms
    Expected Results:
    The unzip time should be almost the same on IPAD AIR and IPAD4.
    Actual Results:
    For same IO operation read/write file, IPAD AIR gets the 50% downgrade performance than the one in IPAD4
    Version:
    IPAD4: 16GB WIFI + IOS7
    IPAD AIR: 16GB WIFI + IOS7
    does anyone else encounter the same problem ?
    A bug already submitted for apple: https://devforums.apple.com/message/993060

    I even tried porting the code to Gumbo and running it there - still, no fonts are being enumerated.
    If you're too lazy to read the whole above post, here's the problem in one sentence
    An SWF that contains a textfield with embedded fonts, when launched by itself succeeds to return the embedded font using Font.enumerateFonts(false), however when loaded using Loader.loadBytes into AIR, it fails to see those fonts even though the textfield in it is displayed and editable.
    How do I make the loaded child application and AIR see the embedded font?

  • MBP 17 sees many more wifi networks than MP

    I have a Mac Pro (Jan 2008) and a MacBook Pro 17" (Jan 2009).
    I've noticed, when I click on the Airport Icon on the menubar, the MacBook Pro scans and sees many more wifi networks than the Mac Pro does... 6 or more versus 3. (My network, and others in the neighborhood.)
    I'm curious. How is the Airport client card in the MBP different from the one in the MP? Does the MP get a weakling Airport card (expecting that it wouldn't move around too much?)
    I haven't yet had the time to experiment with moving my Airport Base Station too far away from the MP (more than a few feet.) What are your experiences with the Airport card in the Mac Pro? How does it compare with the wifi in your MacBook Pro?

    My MP was purchased online with the Airport Extreme card included.
    I had to have my MBP replaced, for a different reason. This new one doesn't see any more wifi networks than my MP does... it sees the same ones. Now my question has become... a non-issue. Too bad it didn't occur to me to record the specs of the AE in my previous MBP. It was probably the same as in my new MBP (?)
    Sysprof says the following about the Airport Card in my MBP:
    Wireless Card Type: AirPort Extreme (0x14E4, 0x8D)
    Wireless Card Locale: USA
    Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (5.10.38.27)
    Wireless Channel: 7
    Sysprof says the following about the Airport Card in my MP:
    Wireless Card Type: Airport Extreme (0x14E4, 0x88)
    Wireless Card Locale: USA
    Wireless Card Firmeare Version: Broadcom BCM43xx 1.0 (5.10.38.27)
    Wireless Channel: 7
    The card type is (slightly) different !?

  • How to block invoice posting more than the GR quantity

    Dear Experts,
    While trying to do MIRO with more than the PO/GR quantity system is accepting both increase in qty and value with out any tolerance limit.
    How to block, so that system should not allow to do MIRO more than the GR quantity.
    Regards,
    Alok

    Hi,
    System will by default block the payment, when it is not matching with the PO/GR value.
    then you have to go transcation code MRBR - Release Blocked Invoices. so that you can make the payment for these invoices.
    system will give you the message before saving, if you want an error message then go to oba5 tcode and change the message in to error, then if the Amount is not matching with the PO/GR value then the system will through error.
    Regards,
    Padma

  • Unable to do GR more than the process order quantity

    When we try to do a GR against a process order (MIGO), and we use a quantity more than the process order, then the system is issuing an 'error' message.
    Say process order is for 37000L, confirmation is done for 39000L (COR6): works
    But when we try the MIGO or MB31, for the GR, then the system issues error as M7022: 'quantity exceeded by 2000L'.
    Checked: 1) OMCQ and the message  M7/ 022 is set as 'w', warning.
                   2) Also, the permissible batch size is 35000L  - 39700L
    Please advice.
    Thnx!

    Hi
    you need to have an overdelivery tolerance (i.e 10%) in the process order header - goods receipt tab.
    The tolerance should be maintained in the work scheduling view of the material. Then it is copied into the process order automatically.
    BR
    Eivind

  • Issue in FF v 3.6.10: I have a page which have more than 20 link, clicking on these link opens up a popup using window.showModalDialog, for the first 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open.

    Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

Maybe you are looking for