More Finder issues

Is it just me, or does the Leopard Finder just plain suck?
I created a file today (and also modified it today) called August_30.doc. The Finder will not find it based on these parameters:
Search THIS MAC for FILE NAME August +
LAST MODIFIED DATE is within the last 2 days
Why shouldn't this search work?????
See screenshot here:
http://www.gonegraphics.com/misc/screen_capture.jpg

That search was set to include System Files, but it was not limited to just System Files. I just tried the search again without the system files line and it still doesn't return anything.
New screen capture posted here:
http://www.gonegraphics.com/misc/screen_capture.jpg

Similar Messages

  • I have iphone 3gs and last days i made upgrade 5.01, but i dont know that this version is not avaliable in brasil yet. than my iphone 3gs 32 gb no more find the wide and it be seaching the sinal. what i need to do to back to before situation. thanks a lo

    i have iphone 3gs and last days i made upgrade 5.01, but i dont know that this version is not avaliable in brasil yet. than my iphone 3gs 32 gb no more find the wide and it be seaching the sinal. what i need to do to back to before situation. thanks a lot

    iOS 5.0.1 has been out for a couple months, if not longer. 
    There was no delay in releasing it in any country.
    So what is your issue? 

  • Finder issues and Get Info refusing to show the number of files on items on the main hard drive.

    I am having finder issues. Mostly on the main hard drive. It takes ages to find things and I get the spinning wheel every time I open a folder.
    So I moved all of my files to a external drive.  When I had finished transfering I hit get info on the files on the external drive and on the same folder on the main drive.  To ensure that it has copied over all the files.  Because it was acting up and not copying all the files.
    Get Info refuses to show the number of files within the folders on the main hard drive. It hasppily tells me everything on any of the external drives.
    I have reset, the imac.  I have re indexed 3 times.  I have deleted the finder plist files.  I have reset finder using terminal commands. I have moved nearly everything off the main hard drive. But nothing is working.
    Can anyone offer any suggestions as to what could be causing my finder and get info issues.
    Any help wpuld be appreciated.
    Running Mountain Lion on a late 2009 Imac

    Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Back up all data.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd,noschg,nosappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
    This time you'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button
    Select
               ▹ Restart
    from the menu bar.

  • Finder Issue

    After iMac (10.6.8) has been running for a few hours, sometimes less than that Garageband and iTunes won't open.
    I have been keeping track of different scenarios when this happens and every time it happens I have noticed that the Finder won't allow me to save any file to the HD or the external drive because the item could not be found.
    It will allow me to save files to the Desktop however.
    I have no idea if Garageband and iTunes and the Finder acting up are related but just putting it out there.
    When I click on any  location via the side bar icons all I get is the respective icon appearing and .
    However, when I click on the Devices icon in the sidebar I can path my way to my user and it allows me to save it anywhere I want.
    Rebooting only fixes these issues temporarily. I have run Disk Utilty from the Start Up Disc as well and everything came back with no problems found.
    Also I am having to Force Quit all Apple based programs such as iWork 08 during this period of the Finder Issue and I cannot access the About This Mac function.
    I can however activate the Software Updater.
    Any help would be greatly appreciated.
    Thanks,
    Robert

    Hi Robert!
    It sounds like there may be some sort of an issue in your operating system causing this to happen. You will probably want to create a Time Machine backup of your computer and reinstall the operating system to see if that affects the issue. An article about Time Machine backups can be found right here:
    Mac Basics: Time Machine
    http://support.apple.com/kb/ht1427
    While an article about reinstalling Snow Leopard can be found here:
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Finder issue with Spaces

    I found a Finder issue when using spaces. I performed an upgrade installation on my Intel Core Duo iMac. Finder worked as expected. Then, I turned on Spaces. After a few minutes the finder hung. I tried using activity monitor several times to force quit it. Finder quit, then relaunched and hung. Then, I turned off Spaces and the Finder stopped hanging and functioned as expected. I turned Spaces back on, and the Finder is still working currently. I am not sure if this bug will reproduce itself at this point.

    Ok, got it!
    Please refer to the original post and the third post in the following thread: http://discussions.apple.com/message.jspa?messageID=10122332
    Turns out I was having the same two problems as the original poster. It also turns out the solution to his first problem, which he outlined in the third post, happened to solve both problems on my machine.
    In your Spaces prefs (Expose & Spaces in the System Preferences), make sure "When switching to an application, switch to a space with open windows for the application" is checked!
    Seems to have worked for me!
    Here's hoping this solution helps others with the same problem. =)

  • Finder Issue with Alphabetizing

    Hi everybody,
    I'm having an issue after installing Lion in that Cover Flow/List/Icon in Finder is not alphabetizing (yet every other option is).  Does any body know how to fix this?  I've made sure that English is the correct text/language, but nothing else has changed.
    Thanks

    I've had similar issues recently. I saw them first on an SMB share. Here are slightly different steps for repro:
    All in the Finder:
    * On a network share, create a new folder, e.g., "test"
    * Within "test", create two new folders, "test1" and "test2", renaming them as you create them
    * Select the "test1" directory you just created
    Result:
    * After selecting "test1", it visually changes to "test2" such that there are two "test2"'s listed there
    * After a short delay, the display is rendered correctly, showing "test1" and "test2", but "test2" is now selected.
    * If you select "test1" again it then displays as "test2" (i.e. two "test2"'s) and "test1" from there on out is inaccessible
    Note that "ls" from the terminal shows these correctly; this is a Finder issue.
    Unmounting and remounting the share fixes the problem.
    This also happens on a USB card reader. It does not happen on the internal drive, nor on a PPC Mac running 10.4.9.

  • Two FINDER issues

    taking a stab at trying to solve two finder issues.
    1. is it possible to keep finder from automatically sorting a re-named folder or file when i am in the middle of re-organizing things? say to wait until i have actively clicked a sort button or otherwise clicked out of the finder view? i am always running around trying to find a re-named file or folder in a list of one hundred files when all i really want to do is rename some things and then move them. having this newly named entity automatically do the skeedaddle out of my view in the finder window is a real pita.
    2. is there a realiable method that will let folders sort alphabetically with folders and files to sort alphabetically with files? i find it very annoying to have all this mixed up together when i will look for a file with files and for a folder with folders. i tried some terminal editing based upon a posted url that described a solution to this at one point but it does not appear to have taken.
    TIA!

    1) No.
    2) Why not sort by Kind?

  • Where do I find issues of Honolulu Magazine I purchased in 2012 to redownload to my ipad?, Where do I find issues of Honolulu Magazine I purchased in 2012 to redownload to my ipad?

    Where do I find issues of Honolulu Magazine I purchased in 2012 to redownload to my ipad?, Where do I find issues of Honolulu Magazine I purchased in 2012 to redownload to my ipad?

    Duh,,,, thank you

  • My iPad Air is locked (my brother change the code, so I don't know it) and is not connected to the internet, in more Find my iPhone is activate, so what i can do to find the pass code?

    My iPad Air is locked (my brother change the code, so I don't know it) and is not connected to the internet, in more Find my iPhone is activate, so what i can do to find the pass code? Help me please!

    In iTunes, select iTunes Store under STORE, scroll to the bottom and change the flag (bottom right) to the country where you are.

  • Load More Messages issues

    I saw some posts about load more messages issues, but nothing seems to be the same as my problem. I'm new to iPhone, so I must be missing something obvious.
    I was looking at my emails this morning and deleted all but 5. I responded to an email, but didn’t send because I forget change the server port for outgoing mail that our server requires. So I went into settings and changed the port. I went back to my inbox but can no longer see the messages I saved, instead there's an option that says “Load More Messages” with a note below it stating “5 messages total, 0 unread”. I have no other emails in my inbox. When I click Load More Messages, nothing happens. I can’t figure out how to get to those emails. I tried cycling the power on the iphone, that didn’t help.
    I'm getting new messages normally. My mail is set to show 25 recent messages. Even if I change this, it still displays the "Load More Messages". As an extreme test, I set it to show 200 recent messages, went back to my inbox, hit the "Load More Messages" option, but that didn't help. What's more, I have a full signal and I'm running 3G.

    Hey man, your problem sounds similar to the one I'm having. I can't load more messages on both of my email accounts. But I think I might have figured out the problem. I recently re-installed my hotmail account and when I was looking through my,"Unread" inbox the, "Load more messages" command was working just fine. So I was continuing to go through my messages to make them read (because if your like me, I don't like to have any messages, "Unread." So when all my messages were read there was about 80 in total, and my setting was set to show the 25 most recent. So I backed out of the mail app, did a few more things and came back hoping that there would only be 25 showing with 0 unread and the ability to load more if i wished. Well, there was 25 showing but the box with the load more messages command was gone and no matter how many times I tried to refresh it would not come back.
    So my theory is this; there always has to be an unread message in your inbox for the load more messages to work. Sorry about the long post. I'm going to test this theory out, knowing my luck, it won't work at all. Good luck bro!
    Peace.

  • I changed my system on my mac 10.6.8 by doing a migration of my data and now i do find issues when i open logic, like i cant close it anymore (need to use the force quit option) if i ll bounce anything it will crash and same thing will happen if i wanna i

    i changed my system on my mac 10.6.8 by doing a migration of my data and now i do find issues when i open logic, like i cant close it anymore (need to use the force quit option) if i ll bounce anything it will crash and same thing will happen if i wanna import something, if anybody has a idea??

    Hi
    This any help?
    http://support.apple.com/kb/TS3968
    CCT

  • Return delivery more than issued quantity

    Hi,
    I posted the goods issuance quantity 10 with mvt 201, when return delivery with mvt 202 then system allow to post more than issued quantity.
    is there any restriction or standard error message to control this.
    Regards,
    Ali

    Hi
    Are you not cancelling the document with reference to the original document. In this system will not allow you to change the quantity.
    Also, refer to enhancement MBCF0005
    and BADI:  MB_QUAN_CHECK_BADI
    Thanks
    Sachin

  • I need more finder labels

    Hi, does anyone know of a simple way to get more finder labels? I need about 12 - 13 instead of the few already there.
    PowerBooks, PowerMacs, Dells, and SGI...busy.   Mac OS X (10.4.2)  

    There are several finder plugins out there that will allow you more control of your labels. The best one is Unsanity's Labels X, which offers you a boatload of labeling options (which I would assume includes more colors, or at least more ways to label - folder, text, etc.). You can find Labels X at macupdate.com.
    If you can't get the variety you need from labels, you can always get an icon editing program that allows you to change the actual folder or file icon / color.

  • More Find/Change Issues !!

    by script I'm going to create and setup new doc, use a dialog to place a text file, and remove content from the text, format and save.<br /><br />the text file contains old msword-to-pagemaker format tags that I need to delete. the tags are in this format: <br /><br /><PmTags1.0Win><fSouvenir>    etc.<br /><br />I need to delete or convert to indesign cs3 the tags<br />(including "<" & ">" signs). <br /><br />I saved a series of 8 find/change steps to delete the content (text not grep) and need to run them consecutively and through as many as 400 entries<br />(all in the same threaded text box).<br /><br />Supposedly their is a "new" FindChangeByList.jsx somewhere that works, but I am unable to find it. the scripting/index page on adobe's website is useless, and provides no help what so ever. no links either.<br /><br />Any help would be greatly appreciated.

    Hi Seth,
    re: "Supposedly their is a "new" FindChangeByList.jsx somewhere that works, but I am unable to find it. the scripting/index page on adobe's website is useless, and provides no help what so ever. no links either."
    I just looked, and everything is still working. Go to:
    http://www.adobe.com/products/indesign/scripting/index.html
    Then click the Scripting Resources tab.
    Here are the direct links that might be helpful--first, updated sample scripts:
    http://wwwimages.adobe.com/www.adobe.com/products/indesign/scripting/downloads/indesign_cs 3_sample_scripts.zip
    Second, the scripts that go with the Scripting Guide:
    http://wwwimages.adobe.com/www.adobe.com/products/indesign/scripting/downloads/indesign_cs 3_guide_scripts.zip
    In the latter, you should take a look at the ReadPMTags.jsx script (it's in the Text folder inside the JavaScript folder of the uncompressed archive). You can take the function (of the same name) from that script and modify it to do exactly what you want.
    Also, if you don't see links or information at that page--which browser are you using?
    Thanks,
    Ole

  • IMac goes to sleep unexpectedly, Finder issues with flash drives - related?

    My iMac falls asleep for no known reason, often in the middle of active use. (Similar problem recently described in thread with messageID=11829917.)
    Sleep onset is frequent but seems to vary based on both currently-running software and attached devices (particularly USB flash drives). It will almost always wake up when I hit the space bar afterward, but might sleep again within a minute or two, then not for an hour or more. The sleep occurs with little notice (brief stall of display, sometimes enough time to click on another app window and bring that forward before the screen goes dark), and 95% of the time the computer wakes up after hitting the spacebar. The other 5 % of the time the display reappears but the entire OS is frozen and usually requires unplugging the power cable. There are other symptoms in the Finder - more below. Once in a while the fan revs up like a WWII fighter plane taking off from a carrier, but this is unusual and all the really irritating stuff also happens without this symptom, which usually stops on its own. Immediately after reawakening error messages are displayed to report that flash drives were improperly disconnected (Tell me about it! This has been the case for several months whether the computer goes to sleep by itself or if I put it there manually.)
    The computer seems to go into sleep mode most frequently when not-particularly-demanding graphics (Photoshop Elements and Adobe Reader) and video (QuickTime Pro 7.6.4) apps are running. Turning these off makes nod-offs less frequent but doesn't stop it entirely. When video thumbnails are displayed in Finder windows a lot of time may be required to load the data and this often paralyzes everything else AND this also seems to be a trigger for a nod-off (i.e. QuickTime not necessary to make the computer choke). This is highly variable and some video clips load quickly (< 20 sec), while others take several minutes, and this doesn't necessarily correlate with file size.
    Another factor is whether flash drives are connected - these seem to make the nod-offs more frequent AND Finder regularly loses communication to these both while just sitting there and also in the middle of file transfers. A very early 250 MB drive (Lexar - vintage 2004) will always communicate, but different USB2-capable drives all are either unreliable (Lexar 8 GB and KData 4 GB both < 1 yr old) or apparently dead (Lexar 2 GB ~ 2 yr old). The failures may be damaging the drives - they are inconsistent-to-bad at communicating with my MacBook Pro. I know this sounds like the drives are at fault, but there are things which make me suspect the OS (both computers use the same version): 1) different flash drives display the same on-again-off-again behavior AND the 2) the 2 GB drive that hasn't communicated with my Macs in over a month has no trouble talking with my wife's WinXP computer. When communication isn't working with these drives, they do not show up in either Finder or Disk Utility. When the Mac-dead 2 GB Lexar is plugged into either computer and I launch Disk Utility, the initial scan for drives never finishes so I have to force quit. (When they are working, on the iMac the large drives only appear in Finder if I go to User and press Command-uparrow (to go up a directory layer) - in columns display mode nothing appears in the left-hand column.
    (The following describes a set of problems I've had a little longer and which may or may not be related):
    At times the Finder loses some but not all functions:
    1) Sometimes files in the Trash can't be ejected* even when all apps are turned off
    2) usually when problem 1) is observed, no keyboard commands work: nothing happens when pressing Command-W, Command-uparrow or Command-N to open a new window. Text typed will not be entered to change filenames (but this can still be done by typing the desired text in TextEdit, copying there and selecting and pasting with mouse commands.)
    <* I have downloaded an app for forcing file deletion, but haven't really needed it - the delete option and keyboard commands all return after shutdown and reboot, and there's usually enough annoying stuff going on by this time that that seems the best thing to do.>
    Things which I've tried to fix it with so far (not in this order):
    - blowing dust out of the back with canned air
    - checking temperatures - CPU/GPU showing 72/73, HD bay 51, etc.
    - fixing permissions from normal boot
    - boot from install disk and running extended hardware test (no problems found during scans repeated several times during the past month)
    - fixing permissions and running Disk First Aid from install disk boot
    - getting files off the hard drive (was as low as 3 GB free space, currently ~ 35 GB and climbing)
    - clearing PRAM
    - resetting system manager (name? - hold down power button when reconnecting power cable, etc.)
    - Power Saver display and computer auto sleep are shut off (both on "never" - I regularly put it to sleep manually)
    - virus scans (Clam XAV)
    I realize that this is a kitchen sink collection of symptoms, but these things may be related and if so, OS developers may want to be sure these problems are avoided in current versions. (Yes I will upgrade my OS soon...)

    Thanks for checking in, Miriam - sorry to get testy about it.
    The iMac's RAM is maxed out (2.5 GB)
    Yes, the system log does report overtemp message to Power management prior to shutdown (today's log at end of post)
    Where do I find normal temperatures for the system? What are the important parameters to watch and what sort of fixes are possible?
    iStat currently shows:
    HD 54° CPU 67° GPU 72° Incoming air 38° (???)
    HD bay 54° GPU ambient 71° opt drive 49°
    ==========================================
    Console.log was largely full of stuff about a bad flash drive I stuck in as a Hail Mary and failure of communication with a scanner (old HP, driver package installs a program which starts at launch which doesn't show up under Startup Items. Apparently the permission got mislaid, so I fixed permissions and this seems OK now. (Only included that because some of it shows up in System.log and it's not worth focusing on.)
    [That all said, there is a software/OS component to the problem and it is graphics-related. The other night I was looking at some flash videos in a series and one in particular repeatedly caused shutdown, while others played normally: domain = jebhost.com /youtube/list.php?q=Henry+8.o&Submit=GO "The Tricycle Thief" only played through once out of about six tries.]
    =========================================
    System Log Aug 1 (last addition 20 minutes ago)
    Aug 1 14:52:46 gerda-kilgores-imac-g5 cp: error processing extended attributes: Operation not permitted
    Aug 1 17:07:42 gerda-kilgores-imac-g5 cp: error processing extended attributes: Operation not permitted
    Aug 1 17:23:51 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::init(0x46c34c0)
    Aug 1 17:23:51 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::free()
    Aug 1 17:24:07 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::init(0x3827ec0)
    Aug 1 17:24:07 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::free()
    Aug 1 17:38:33 gerda-kilgores-imac-g5 kernel[0]: disk1s1: I/O error.
    Aug 1 17:38:33 gerda-kilgores-imac-g5 diskarbitrationd[40]: unable to repair /dev/disk1s1 (status code 0x00000008).
    Aug 1 17:38:41 gerda-kilgores-imac-g5 kernel[0]: USBF: 31965.839 AppleUSBEHCI[0x360e800]::Found a transaction which hasn't moved in 5 seconds on bus 75, timing out!
    Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31966.868 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31966.901 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31967. 23 ControlTransaction: control packet 1 error 0xe0004057
    Aug 1 17:38:49 gerda-kilgores-imac-g5 kernel[0]: USBF: 31973.868 AppleUSBEHCI[0x360e800]::Found a transaction which hasn't moved in 5 seconds on bus 75, timing out!
    Aug 1 17:38:53 gerda-kilgores-imac-g5 kernel[0]: USBF: 31977.938 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:38:53 gerda-kilgores-imac-g5 kernel[0]: USBF: 31978. 2 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:38:56 gerda-kilgores-imac-g5 kernel[0]: USBF: 31981.506 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:38:56 gerda-kilgores-imac-g5 kernel[0]: USBF: 31981.571 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:38:59 gerda-kilgores-imac-g5 kernel[0]: USBF: 31984.264 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:38:59 gerda-kilgores-imac-g5 kernel[0]: USBF: 31984.329 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986. 31 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986. 64 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986.187 ControlTransaction: control packet 1 error 0xe0004057
    Aug 1 17:39:02 gerda-kilgores-imac-g5 kernel[0]: USBF: 31987.712 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:39:02 gerda-kilgores-imac-g5 kernel[0]: USBF: 31987.774 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:39:03 gerda-kilgores-imac-g5 kernel[0]: USBF: 31988.139 IOUSBCompositeDriver[0x46bea00](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
    Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989. 55 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.178 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.204 ControlTransaction: control packet 1 error 0xe0004057
    Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.479 IOUSBCompositeDriver[0x46bec00](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
    Aug 1 17:39:05 gerda-kilgores-imac-g5 kernel[0]: USBF: 31990.455 ControlTransaction: control packet 1 error 0xe0004057
    Aug 1 17:39:05 gerda-kilgores-imac-g5 kernel[0]: USBF: 31990.503 IOUSBCompositeDriver[0x36cb380](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
    Aug 1 17:49:08 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Aug 1 17:49:08 localhost lookupd[43]: lookupd (version 369.8) starting - Sun Aug 1 17:49:08 2010
    Aug 1 17:49:08 localhost kernel[0]: vmpagebootstrap: 633665 free pages
    Aug 1 17:49:08 localhost memberd[41]: memberd starting up
    Aug 1 17:49:08 localhost kernel[0]: migtable_maxdispl = 70
    Aug 1 17:49:08 localhost kernel[0]: 92 prelinked modules
    Aug 1 17:49:08 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Aug 1 17:49:08 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Aug 1 17:49:08 localhost kernel[0]: using 6553 buffer headers and 4096 cluster IO buffer headers
    Aug 1 17:49:08 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
    Aug 1 17:49:08 localhost kernel[0]: DART enabled
    Aug 1 17:49:08 localhost kernel[0]: USB caused wake event (EHCI)
    Aug 1 17:49:08 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe261dcc; max speed s400.
    Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::probe:
    Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::start before command
    Aug 1 17:49:08 localhost kernel[0]: Security auditing service present
    Aug 1 17:49:08 localhost kernel[0]: BSM auditing present
    Aug 1 17:49:08 localhost kernel[0]: disabled
    Aug 1 17:49:08 localhost kernel[0]: rooting via boot-uuid from /chosen: D5C0BAB6-ADB2-3A2A-9DDD-6F971A163F6B
    Aug 1 17:49:08 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Aug 1 17:49:08 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/WDC WD2500JS-40MVB1 Media/IOApplePartitionScheme/Untitled 3@3
    Aug 1 17:49:08 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
    Aug 1 17:49:08 localhost kernel[0]: jnl: replay_journal: from: 2051072 to: 8100352 (joffset 0xa701000)
    Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::stop
    Aug 1 17:49:08 localhost kernel[0]: AppleSMU -- shutdown cause = 3
    Aug 1 17:49:08 localhost kernel[0]: AppleSMU::PMU vers = 0x000d0092, SPU vers = 0x56, SDB vers = 0x01,
    Aug 1 17:49:08 localhost kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
    Aug 1 17:49:08 localhost kernel[0]: HFS: Removed 2 orphaned unlinked files
    Aug 1 17:49:08 localhost kernel[0]: Jettisoning kernel linker.
    Aug 1 17:49:08 localhost kernel[0]: Resetting IOCatalogue.
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 0
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
    Aug 1 17:49:08 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[33]: starting
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
    Aug 1 17:49:08 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
    Aug 1 17:49:08 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
    Aug 1 17:49:08 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
    Aug 1 17:49:08 localhost DirectoryService[46]: Launched version 2.1 (v353.6)
    Aug 1 17:49:09 localhost kernel[0]: UniNEnet: Ethernet address 00:14:51:26:1d:cc
    Aug 1 17:49:09 localhost diskarbitrationd[40]: disk0s3 hfs D5C0BAB6-ADB2-3A2A-9DDD-6F971A163F6B HiMac /
    Aug 1 17:49:09 localhost kernel[0]: AirPortPCI_MM: Ethernet address 00:14:51:7e:85:c0
    Aug 1 17:49:09 localhost launchd: Server 3507 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[43]: exited abnormally: Hangup
    Aug 1 17:49:10 localhost usbmuxd[36]: usbmuxd-196 built for iTunesNineTwo on May 17 2010 at 13:53:51, running 32 bit
    Aug 1 17:49:10 localhost lookupd[63]: lookupd (version 369.8) starting - Sun Aug 1 17:49:10 2010
    Aug 1 17:49:10 localhost configd[38]: WirelessConfigure: 88001003
    Aug 1 17:49:10 localhost configd[38]: initCardWithStoredPrefs failed.
    Aug 1 17:49:10 localhost configd[38]: WirelessConfigure: 88001003
    Aug 1 17:49:11 localhost kernel[0]: Registering For 802.11 Events
    Aug 1 17:49:11 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
    Aug 1 17:49:12 localhost mDNSResponder: Adding browse domain local.
    Aug 1 17:49:13 localhost kernel[0]: ATY,Aphrodite2_A: vram [98000000:08000000]
    Aug 1 17:49:13 localhost kernel[0]: ATY,Aphrodite2_B: vram [98000000:08000000]
    Aug 1 17:49:13 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
    Aug 1 17:49:14 localhost loginwindow[67]: Login Window Started Security Agent
    Aug 1 17:49:18 gerda-kilgores-imac-g5 configd[38]: setting hostname to "gerda-kilgores-imac-g5.local"
    Aug 1 17:49:20 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link Active: "U2M67" - 001801fb71c5 - chan 11
    Aug 1 17:49:20 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup
    Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
    Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
    Aug 1 17:49:23 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[63]: exited abnormally: Hangup
    Aug 1 17:49:23 gerda-kilgores-imac-g5 lookupd[119]: lookupd (version 369.8) starting - Sun Aug 1 17:49:23 2010
    Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: setting hostname to "new-host.home"
    Aug 1 17:49:26 gerda-kilgores-imac-g5 configd[38]: target=enable-network: disabled
    Aug 1 17:49:27 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup complete
    Aug 1 17:49:29 gerda-kilgores-imac-g5 mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1.
    Aug 1 18:18:49 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b609000]::init(0x3587f00)
    Aug 1 18:18:49 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b609000]::free()
    Aug 1 18:28:19 gerda-kilgores-imac-g5 kernel[0]: IOSMUPwrController:: OverTemp notification
    Aug 1 18:28:19 gerda-kilgores-imac-g5 kernel[0]: Power Management received emergency overtemp signal. Going to sleep.
    Aug 1 18:28:21 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link DOWN (Client disAssoc 0)
    Aug 1 18:28:21 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[119]: exited abnormally: Hangup
    Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
    Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: setting hostname to "gerda-kilgores-imac-g5.local"
    Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: AppleTalk shutdown
    Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: AppleTalk shutdown complete
    Aug 1 18:28:21 gerda-kilgores-imac-g5 /usr/sbin/AppleFileServer: AFPServer::AbnormalATListenerShutDown - clear listener
    Aug 1 18:28:21 gerda-kilgores-imac-g5 lookupd[240]: lookupd (version 369.8) starting - Sun Aug 1 18:28:21 2010
    Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: System Sleep
    Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
    Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: System Wake
    Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: Wake event 0020
    Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: USB caused wake event (EHCI)
    Aug 1 18:28:26 gerda-kilgores-imac-g5 kernel[0]: FireWire (OHCI) Apple ID 52 built-in: handleSelfIDInt - received quads == 0. issuing bus reset
    Aug 1 18:28:32 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link Active: "U2M67" - 001801fb71c5 - chan 11
    Aug 1 18:28:32 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup
    Aug 1 18:28:35 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[240]: exited abnormally: Hangup
    Aug 1 18:28:35 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
    Aug 1 18:28:35 gerda-kilgores-imac-g5 lookupd[249]: lookupd (version 369.8) starting - Sun Aug 1 18:28:35 2010
    Aug 1 18:28:36 gerda-kilgores-imac-g5 configd[38]: setting hostname to "new-host.home"
    Aug 1 18:28:37 gerda-kilgores-imac-g5 mDNSResponder: Repeated transitions for interface en1 (192.168.1.2); delaying packets by 5 seconds
    Aug 1 18:28:38 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup complete
    Aug 1 18:28:41 gerda-kilgores-imac-g5 mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1.

Maybe you are looking for

  • Text overflowing text fields

    Hi all, We created a PDF form which our client intends to send out to their clients. The problem is that the form doesnt work for them (works fine for our team using up to date Acrobat) so Im guessing they are using an older version of Acrobat. We ar

  • Stop loading from cache

    Is there a way to stop java loading a file from the cache this is being used in a jar loader which loads the jar from a website

  • Call an Startup-Plug from another WDA

    Hello. How can I call a Startup-Plug from another WDApplication with a table-Parameters. I get the URL from the Method cl_wd_utilities=>constuct_wd_url. thanks for helping Edited by: Marcus Ventur on Dec 2, 2008 11:33 AM

  • NForce4 SATA Drivers for Win 2003 ?

    I need load Windows 2003 Enterprise Edition in my new system --K8N Neo4 Platinum + Winnie 3200--, but i dont know if the 2000/XP Disck should work properly with this OS.  Are there any special drivers to load Win 2003 under F6 key method ?...Where ca

  • F.27 - Periodic account statements into a file

    Hi Experts!, I have a requirement as: when F.27( Periodic account statements) or similar T-code(if exist)  is executed with a selection the output should be in file formart, NOT as print or PDF. Please suggest. PRK.