More Guide Data Issues

Channel 319 blackbelt tv has a "to be announced" message on the guide for the next two weeks where you can not set up anything to tape and it is a channel that has martial arts movies plus fights on there for people to watch. 1509 tele el salvador is also another channel that no schedule there and just has a general tele el salvador programming message all day long. 1548 dominican view is a channel that has a message all day long on the guide that says dominican view programming when it should be broken up into specific programs just like tele el salvador 1509. Kuwait tv channel 1781 also has a message that reads kuwait tv programming all day long where you do not know what show is on or when it will be on just like channels 319, 1509, 1548. You have a guide provider who does have the correct schedules for those channels so please notify them about the issues that exist plus try to fix channel 108 abc news now which is wrong most of the time throughout the day and at night. Channel 229 is wrong too where it is a channel that is an american channel for half the day then it is a korean one for the other half. We are all in this together whether it is an employee, a customer, a channel, the guide provider or verizon as a company everyone benefits when the data on the guide is up to date so please take into account what those of us who bring these issues up are saying because it behooves everyone involved to continue to try to have these lines of communication to have a back and forth to see to it that everyone at the end of the day is happy with the service that they are being provided with.

Once again verizon channel 319 blackbelt tv which is a channel that has movies and fights on it to watch has a to be announced message on the guide for the next two weeks even though there are programs on there for people to watch but they can not set up anything to tape off of it. Channels 1509, 1548, 1781 continue to have no schedules at all to tape programs off of even though there are shows that are currently playing that people would like to set up to tape but they can not do so. Tv guide and other guide providers online have the fios schedules for not only the channels that i mentioned but they also have the rest of your guide accurately on their websites so if you can make the necessary corrections people can finally have an opportunity to enjoy those channels that they are paying for. Some other problems that exist are that cnn's morning shows early start is from 5am-7am then starting point is from 7am-9am not as the guide has them listed which is from 5am-6am then 6am-9am. The 2am show on cnn is also not there which should be erin burnett outfront not anderson cooper 360 from 1am-3am. The weekends also continue to be wrong on cnn too plus cnn espanol 1540 has a 1 hour show on at 11am not a 45 minute show that is from 11:15am-12pm. Cnn headline news also is running a weekend schedule on thursdays with a financial program that is only on the weekends called clark howard being listed at 4pm on thursdays when it is supposed to be hln news now. Channel 108 abc news now has the wrong description for the what's the buzz show which is a celebrity news show not a houston texas travel show as it always is indicated. Channel 480 latv has a program called en la zona which means in the zone which is a show that is on weekdays at 8:30pm which is described as a movie review show when in fact it is a show that is all about celebrity news. Msnbc has a first look at the news show on at 5am but the description that is there is for a first look at the asian markets for the bloomberg channel. There are no channels anymore on 394 and 894. 363 encore espanol should have an all spanish audio plus channel 461 claims to have an hd version of it but when you press the c button on the remote you get redirected to another channel. Another odd thing is that a message that once indicated that there was no longer a channel 466 mega tv now indicates that it is awaiting its programming information schedule plus it now has a message that you can watch it in hd but there is no sd version to watch. The last thing that i want to mention is that channel 1549 in the morning is correctly listed this week from 5:30am-10:30am but starting next week from monday - wednesday it is listed wrongly as 6:30am-10:30am which means that if you were to tape that show then you would miss the first hour of it plus the next program will be wrong too. Next thursday and friday of next week though are listed correctly from 5:30am-10:30am. Please fix these issues as soon as you can. Thank you.

Similar Messages

Even more bizzare date issue

A jpeg file has all three dates (Date Time Original, Date Time Digitized,
Date Time) set to 12/31/2000 5:00:00 PM. The Metadata Browser puts this
image in the Unknown Date bin (don't know why this is broken, but that's
another thread). So, I use Metadata->Edit Capture Time->Adjust to a
specified date and time, to set the value to 12/31/2000 5:00:01 PM (in other
words, add one second to the time stamp). Now the Metadata Browser moves
the image from the Unknown Date bin to the correct date bin.
Then, and this is where it gets really wierd, I change the time back to
12/21/2000 5:00:00 PM, and the Metadata Browser moves the image bakc to the
Unknown Date bin. Incredible!!!
I changed the value to various other dates and times, which would move the
image to the correct date bin, but when I changed the value back to the
original date and time, the Metadata Browser moved the image back to the
Unknown Date bin. Very odd behavior. Any explanations?
Best,
Christopher

I had no success in changing dates from within LR and hence don't ever touch them in LR. It just screws things up.
There are, however, more than three possible date/times in metadata. EXIF has three, as you note. But you can also put dates in IPTC info if you choose to do so.
Also, LR might support one of those dates. If you look at all metadata in the right hand panel, you can find under IPTC one of those dates, which they call "Date Created".
exifer calls the three dates you can choose to put in the IPTC: Creation date, Distribution date, and Sent date. Exifer calls the three dates in EXIF data: Date taken, Date modified, Date digitized. Date modified gets picked up from the file system, apparently. Cameras usually set Date taken and Date digitized. For my scans, I'm setting both dates. The Date taken being my guess for when they were taken and Date digitized when they were scanned. It may seem that the latter information is not very important, but we've had several scanners and if I put in the date scanned I'll have a better idea later which scanner was used. Maybe I should use an unused field for the scanner model but I haven't done so so far.
I'm not comfortable changing the metadata outside of LR after I've loaded and tagged them in LR because of our lack of knowledge as to what is really going on. Theoretically one could write metadata to file, do the changes, then import metadata from file but...

Reverse columns with GUID Data type

Hi All,
I want to reverse some of the SQL tables in Sunopsis to create the datastores. One column in these SQL tables has GUID data type and when i reverse this table, all other data being properly displayed but the reversed data store is not displaying data under the column.
I have added GUID data type in topology in Physical Schema but still it is not working.
Can you please suggest what should I check?
Thank you so much in advance.
Monalisa

For some reason, this sounds like a technical question and not a comment or issue with the documentaiton.
Can you suggest a more appropriate place to ask your question?

Re: [iPlanet-JATO] More on ComputedColumn issue

Vladimir--
I'm going to answer this question without doing my full homework on it;
please let me know if I hit the mark or not. If I understand correctly, you
have a problem using a model for both UPDATE and SELECT queries because of a
computed column...correct?
If so, this issue is solved in JATO 1.2. 1.2 has an attribute in the field
descriptor to indicate in which type of queries a field should be used. You
can use this attribute to indicate that a field should only be used for
UPDATE queries, SELECT queries, or whatever combination of query types you
require. You can then define synthetic fields for use only during one of
the query types.
Does this sound useful in fixing your issue? A way around this in JATO 1.1
would be to create separate models for SELECT and UPDATE queries. The
SELECT model could contain all the fields for the joined query, but the
UPDATE model would contain info for only one table. The 1.2 feature simple
allows you to do the same using one model.
Todd
----- Original Message -----
From: "vivanov4114" <vivanov@b...>
Sent: Friday, January 11, 2002 8:12 AM
Subject: [iPlanet-JATO] More on ComputedColumn issue
We have a similar problem with do's ComputedColumn after the
translation as Kostas described in his detailed message #439.
We have JATO/iMT version 1.1. Is the resolution of this problem added
to the version 1.2 (or 1.2.1)?
I've tried to adjust the ModelImpl class based on the .sdo file
(using ComputedColumn attributes) for these fields and failed.
Whether I missed something else, or our situation is a little bit
different.
In our case the dataObject has one Computed Field from one table and
another Computed Field from another table along with joint between
these two tables and third one, and, finally, the whole stuff is
under the repeatable (with static fields bindings to these two
computed fields).
The modelImpl class after the translation (as in the #439) has the
same values "" and "." for ..._NAME and QUALIFIED_..._NAME strings
respectively (for each computed do's field).
I guess that we could meet extra problem with this (for manual
adjustment) because of there is no TableName attribute in .sdo file
for computed field (as well as there is no ColumnName attribute for
computed field). If ComputedColumn attribute (computed field) could
play a role of ColumnName attribute (regular case), what would be an
analog of TableName attribute for computed field?
The bottom line of this is as follows: we have a same
SQLException "Invalid Column Name"
from ResultSetModelBase.updateModel() as Kostas described. It causes
the problem for
RequestHandlingTiledViewBase.executeAutoRetrieving() method that
can't bind the proper Model.
Finally, beginDisplay() method from
pgXXXXPriorityCountTiledView.class throws exception and
jasper compiler brings run-time error (Tomcat 3.2).
Kostas, if this problem still exists for translation of such cases,
could you please post a fragment that fixed you original problem in
addition to the message #439 (just to be sure, that I haven't missed
something important).
Thank you very much in advance.
Vladimir Ivanov,
P. S. I've enclosed the excerption from the .sdo file for this
dataObject below.
Class "SQLObject" ;
Name "doPriorityCount" ;
DataFields {
0 { // first df is a computed column from the first
//table
Class "DataField" ;
Name "dfPriorityDesc" ;
ComputedColumn "MIN
(MOS.PRIORITY.PDESCRIPTION)" ;
1 { // second df is a computed column from the second
// table
Class "DataField" ;
Name "dfPriorityCount" ;
ComputedColumn "COUNT
(ASSIGNEDTASKSWORKQUEUE.PRIORITYID)" ;
2 { // third df is a regular df
Class "DataField" ;
Name "MOS_PRIORITY_PRIORITYID" ;
TableName "MOS.PRIORITY" ; // this attribute
// doesn't exist for ComputedColumn
ColumnName "PRIORITYID" ; // this attribute
// doesn't exist for ComputedColumn
DataCachingEnabled "False" ;
DataCachingDuration "0" ;
DataCachingMaxRows "200" ;
DataObjectType "Select" ;
Tables "MOS.ASSIGNEDTASKSWORKQUEUE,MOS.PRIORITY,MOS.DEAL" ;
SQLDistinct "False" ;
SelectFilter {
"MOS.DEAL.SCENARIORECOMMENDED" ;
"=" ;
"'Y'" ;
"AND" ;
"MOS.DEAL.COPYTYPE" ;
"<>" ;
"'T'" ;
SelectOrder {
"MOS.PRIORITY.PRIORITYID ASC" ;
SelectGroup {
"MOS.PRIORITY.PRIORITYID" ;
EnableEntireTableDelete "False" ;
EnableEntireTableUpdate "False" ;
SQLTextOverrideSelect "Partial" ;
SQLTextOverrideDelete "None" ;
SQLTextSelectJoin "MOS.ASSIGNEDTASKSWORKQUEUE.DEALID =
MOS.DEAL.DEALID
AND MOS.PRIORITY.PRIORITYID <> 0
AND MOS.PRIORITY.PRIORITYID =
MOS.ASSIGNEDTASKSWORKQUEUE.PRIORITYID(+)
AND MOS.ASSIGNEDTASKSWORKQUEUE.TASKSTATUSID
(+) = 1 " ;
For more information about JATO, including download information, pleasevisit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Todd,
Sorry for the delay with the answer, I've tried to obtain JATO 1.2
and repeat the project migration to verify whether version 1.2 solves
my problem or not (actually, it is a pilot sub-project).
Unfortunately, I still have no 1.2 version.
Let me try to answer on your question without getting the results
with JATO 1.2. Your explanation sounds like version 1.2 is very close
to solve the problem. Actually, our situation is easier because we
have SELECT object only, not SELECT and UPDATE. For data integrity
the only 'Select' ND's do(s) have been used through the whole
project. The backend communication (update, delete) is provided via
EJB like (entity) Java classes.
My question is: could I define synthetic field with 1.1.1 version. By
the way, word synthetic reflects the possibility to construct the
field under certain SQL circumstances (SELECT, UPDATE, e.g.) or the
possibility to construct a `fake' field (for example,
CountColumn of a do) as well. If the later is true, could you please
give a brief idea how to create this synthetic field.
After the translation in the doPriorityCountModelImpl class we've
got:
public static final String COLUMN_DFPRIORITYDESC="";
public static final String QUALIFIED_COLUMN_DFPRIO
RITYDESC=".";
public static final String COLUMN_DFPRIORITYCOUNT="";
public static final String QUALIFIED_COLUMN_DFPRIO
RITYCOUNT=".";
(see my original post please with details, as well).
If this is not a problem for 1.2 please do not waste your time to fix
it for 1.1.1. I need to repeat my results with the version 1.2 anyway.
We have a number of similar idioms through the project. In this
particular case, the CountColumn that counts the field from another
table may bring problem for manual adjustment (see my original
notes). The whole SQL query is as follows (for this case):
SELECT MIN(MOS.PRIORITY.PDESCRIPTION),
COUNT(ASSIGNEDTASKSWORKQUEUE.PRIORITYID),
MOS.PRIORITY.PRIORITYID
FROM MOS.ASSIGNEDTASKSWORKQUEUE, MOS.PRIORITY, MOS.DEAL
WHERE MOS.DEAL.SCENARIORECOMMENDED = 'Y'
AND MOS.DEAL.COPYTYPE <> 'T'
GROUP BY MOS.PRIORITY.PRIORITYID
ORDER BY MOS.PRIORITY.PRIORITYID ASC
During the pre-handler activity (it is the part of our Object
Framework on the top of Netdynamics Object Framework) system passes
id (and mos.deal.dealid = XXX) to the do (select query). After the
run-time execution of this do the results are displayed on the screen
bind to the repeatable statics.
Thank you very much,
Vladimir
--- In iPlanet-JATO@y..., "Todd Fast" <Todd.Fast@S...> wrote:
Vladimir--
I'm going to answer this question without doing my full homework on it;
please let me know if I hit the mark or not. If I understand correctly, you
have a problem using a model for both UPDATE and SELECT queries because of a
computed column...correct?
If so, this issue is solved in JATO 1.2. 1.2 has an attribute in the field
descriptor to indicate in which type of queries a field should be used. You
can use this attribute to indicate that a field should only be used for
UPDATE queries, SELECT queries, or whatever combination of query types you
require. You can then define synthetic fields for use only during one of
the query types.
Does this sound useful in fixing your issue? A way around this in JATO 1.1
would be to create separate models for SELECT and UPDATE queries. The
SELECT model could contain all the fields for the joined query, but the
UPDATE model would contain info for only one table. The 1.2 feature simple
allows you to do the same using one model.
Todd
----- Original Message -----
From: "vivanov4114" <vivanov@b...>
Sent: Friday, January 11, 2002 8:12 AM
Subject: [iPlanet-JATO] More on ComputedColumn issue
We have a similar problem with do's ComputedColumn after the
translation as Kostas described in his detailed message #439.
We have JATO/iMT version 1.1. Is the resolution of this problem
added
to the version 1.2 (or 1.2.1)?
I've tried to adjust the ModelImpl class based on the .sdo file
(using ComputedColumn attributes) for these fields and failed.
Whether I missed something else, or our situation is a little bit
different.
In our case the dataObject has one Computed Field from one table and
another Computed Field from another table along with joint between
these two tables and third one, and, finally, the whole stuff is
under the repeatable (with static fields bindings to these two
computed fields).
The modelImpl class after the translation (as in the #439) has the
same values "" and "." for ..._NAME and QUALIFIED_..._NAME strings
respectively (for each computed do's field).
I guess that we could meet extra problem with this (for manual
adjustment) because of there is no TableName attribute in .sdo file
for computed field (as well as there is no ColumnName attribute for
computed field). If ComputedColumn attribute (computed field) could
play a role of ColumnName attribute (regular case), what would be an
analog of TableName attribute for computed field?
The bottom line of this is as follows: we have a same
SQLException "Invalid Column Name"
from ResultSetModelBase.updateModel() as Kostas described. It causes
the problem for
RequestHandlingTiledViewBase.executeAutoRetrieving() method that
can't bind the proper Model.
Finally, beginDisplay() method from
pgXXXXPriorityCountTiledView.class throws exception and
jasper compiler brings run-time error (Tomcat 3.2).
Kostas, if this problem still exists for translation of such cases,
could you please post a fragment that fixed you original problem in
addition to the message #439 (just to be sure, that I haven't missed
something important).
Thank you very much in advance.
Vladimir Ivanov,
P. S. I've enclosed the excerption from the .sdo file for this
dataObject below.
Class "SQLObject" ;
Name "doPriorityCount" ;
DataFields {
0 { // first df is a computed column from the first
//table
Class "DataField" ;
Name "dfPriorityDesc" ;...........................................
ComputedColumn "MIN
(MOS.PRIORITY.PDESCRIPTION)" ;............................................
1 { // second df is a computed column from the second
// table
Class "DataField" ;
Name "dfPriorityCount" ;
ComputedColumn "COUNT
(ASSIGNEDTASKSWORKQUEUE.PRIORITYID)" ;
2 { // third df is a regular df
Class "DataField" ;
Name "MOS_PRIORITY_PRIORITYID" ;
TableName "MOS.PRIORITY" ; // this attribute
// doesn't exist for ComputedColumn
ColumnName "PRIORITYID" ; // this attribute
// doesn't exist for ComputedColumn
DataCachingEnabled "False" ;
DataCachingDuration "0" ;
DataCachingMaxRows "200" ;
DataObjectType "Select" ;
Tables "MOS.ASSIGNEDTASKSWORKQUEUE,MOS.PRIORITY,MOS.DEAL" ;
SQLDistinct "False" ;
SelectFilter {
"MOS.DEAL.SCENARIORECOMMENDED" ;
"=" ;
"'Y'" ;
"AND" ;
"MOS.DEAL.COPYTYPE" ;
"<>" ;
"'T'" ;
SelectOrder {
"MOS.PRIORITY.PRIORITYID ASC" ;
SelectGroup {
"MOS.PRIORITY.PRIORITYID" ;
EnableEntireTableDelete "False" ;
EnableEntireTableUpdate "False" ;
SQLTextOverrideSelect "Partial" ;
SQLTextOverrideDelete "None" ;
SQLTextSelectJoin "MOS.ASSIGNEDTASKSWORKQUEUE.DEALID =
MOS.DEAL.DEALID
AND MOS.PRIORITY.PRIORITYID <> 0
AND MOS.PRIORITY.PRIORITYID =
MOS.ASSIGNEDTASKSWORKQUEUE.PRIORITYID(+)
AND
MOS.ASSIGNEDTASKSWORKQUEUE.TASKSTATUSID
(+) = 1 " ;
For more information about JATO, including download information, please
visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Consistent Data Issues Even After Replacement

I don't know whether to blame the phone or the ice cream sandwich update for all the problems I have been having with my RAZR. When I first got it six months ago it was great and I loved it now after the ice cream sandwich update I dont really like it anymore. I never had any sort of issues while using it on gingerbread. Today, I have seen my phone switch constantly between 3g and 4g more times than I can count over the course of half an hour. I couldn't even get a consistent signal to watch a 3 minute youtube clip.
First off, I updated it to ICS but first wiped the phone clean including cache, etc. So it would have basically been a clean install. Now, I have certain issues. The 4g and 3g switch is terrible. On the street and in my own house I have had the same thing happen. In my house I get anywhere from 3-5 bars of 4g but it still switches over to 4 bars of 3g. I have even seen it switch from 4g to 3g when I had full bars. I have already replaced the sim cards, but I am still having these issues. It's actually happening on all 4 of my RAZRs on my family plan. I have gone through the network resets where I pull out the sim card and for 30 seconds, insert it, power on the phone, etc. I went through all 4 of them with the Rep over the phone. I have also had several instances where I did not have data but signal bars and then I didn't have absolutely anything at all. I live in a "major" city metro area, Boston, and I can't believe I am having these problems.
At first I would have gone off and blamed Verizon, but it is definitely not Verizon, it is our phones that are terrible. I can confirm this because my brother uses an ipad (4g Verizon) on a separate account and he consistently maintains 4g even though I have seen it go as low as two bars. Yes, I understand the ipad is a different device and may have a different radio, but that is exactly how our phones used to work on gingerbread. I received a replacement device and I am still having the same issues. Also, the headset speaker, not the speaker on the back, or receiver is really tinny during phone calls even with the in call volume down half way. It is really annoying and the little tone that plays after hanging up makes the speaker sound like its about to blow out. I don't know what to do if the RAZR will keep having data issues because this is absolutely ridiculous. I know i'm not entitled to anything but for $310 a month I mean come on, I just want my phone to work properly. As I am typing this now, I have witnessed my phone switch between 4g, 3g, and no signal at least 5 times and of course my brother's iPad on Verizon has kept its 4g signal.

Thanks for all the suggestions, but they just don't work at all guys. I've even tried that restore connectivity app from Motorola, but of course it didn't work. I don't like that I keep having constant switches between 3g,4g, and no signal bars. It's awful thats just what it is. I feel like I got gipped with this update promising better user experience. If the darned thing can't connect to their network, then what is Verizon doing to address these issues? Every time I try to do something "data intensive" (i.e. youtube, facebook, twitter, etc) the data signal just drops and I'm either left with gray bars and no data or no signal bars whatsoever. Also one thing that annoys me to death with this phone is that I have it sitting in my pocket after I lock the screen and I go to pull it out of my otherwise empty pocket. The screen is turned on by itself (I have the clear silicon case on it so the power button shouldn't be pressed by itself and no I don't wear skinny jeans), its got 3g and no bars, and its piping hot.
WHAT IS WRONG WITH THIS PHONE VERIZON???!!!

Overlap date Issue 0hrposition_attr

Hi
I'm facing one records overlap date Issue with 0hrposition_attr.Out of 4 records one records i'm getting as start date as future date and end date as past date.I checked in the source i did not see such records.Due to this issue the records are not updated in the target.But i did not notice such issue with 0hrposition_Text and 0HRPOSITION_CCTR_ATTR load went fine with out any over lap.
Eg:
POSITION          VALID FROM          VALID TO
12345678            04/01/2014            04/20/2014
12345678            04/21/2014            04/24/2014
12345678            04/25/2014            04/24/2014
12345678            04/25/2014            12/31/9999
I debug but i did not see any issue,So there any way that i can delete that particular records at PSA level so that loads went successful.I attacdshed the document for better idea.
Regards
Raj

Hi,
only these record is getting the problem and all records.
check the one record at RSA3 for testing purpose same record check in BW side.
if you getting like this not problem you can check the only latest record
12345678
04/25/2014
12/31/9999
put the filter at VALID TO data 12/31/9999 and form date 04/25/2014.
you want lookup the code just add the one more point.
WHERE POSITION = RESULT_PACKAGE- 0POSITION
     and DATETO = '99991231'.
it will pick the only latest record.
Thanks,
Phani.

VPD date issue between 10.1 and 10.2 databases

I have uncovered an issue today with VPD against date fields. The issue came up at a client site on a 10.2 database. When I got back to the hotel and tried this on my own database, which is 10.1, I got no issue and everything worked ok.
Therefore, I am asking if anyone is able to try out the following for me on different Oracle databases and platforms and let me know whether it worked for you or not. I'd like to compile a list of database versions and platforms on which the issue occurs.
Step 1: create this table as a user
CREATE TABLE TST_DATE AS (
SELECT 1 PERSON_UID,
Trunc(SYSDATE) BIRTH_DATE,
To_Char(Trunc(SYSDATE), 'DD-MON-YYYY') CHAR_DATE,
123456 TAX_ID,
'Smith, Michael B.' FULL_NAME FROM dual);
Step 2: grant select rights on the table
GRANT SELECT ON TST_DATE TO PUBLIC;
Step 3: switch your login to SYS and run this script:
CREATE OR REPLACE FUNCTION F_CHECK_ITEM_TST(p_object_schema in varchar2, p_object_name varchar2)
RETURN VARCHAR2 IS
V_PREDICATE VARCHAR2(2000) := '1 = 2';
BEGIN
RETURN(V_PREDICATE);
END F_CHECK_ITEM_TST;
Step 4: As SYS, run this to grant access rights over the function
GRANT EXECUTE ON F_CHECK_ITEM_TST TO PUBLIC;
Step 5: As SYS, run this to enable the policy
BEGIN DBMS_RLS.ADD_POLICY(
OBJECT_SCHEMA => 'DRAKE',
OBJECT_NAME => 'TST_DATE',
POLICY_NAME => 'SecByTST',
FUNCTION_SCHEMA => 'SYS',
POLICY_FUNCTION => 'F_CHECK_ITEM_TST',
STATEMENT_TYPES => 'SELECT',
POLICY_TYPE => DBMS_RLS.DYNAMIC,
SEC_RELEVANT_COLS => 'BIRTH_DATE',
SEC_RELEVANT_COLS_OPT => DBMS_RLS.ALL_ROWS);
END;
Note: in the above policy change the OBJECT_SCHEMA name to be the name of the user who owns the table you created in Step 1
Step 6: Go into Discoverer Admin and import the table as a new folder.
Be sure to uncheck the "Date hierarchies" box and set "Default aggregate on data points" to detail. Grant access to any user.
Step 7: Using Desktop or Plus, log in as that user then try to query the folder with the date not included, there should be no problem.
Step 8: Now try to query with the date included
On my 10.2 database I get ORA-24334: no descriptor for this position. This happens when logged into Discoverer as the table owner, EUL owner or any other user. However, when logged into Discoverer as SYS which is exempt from all VPD policies, there is no error when the date is included.
We tried this in Discoverer Desktop, Plus and Viewer with the same results in all three. We can successfully query the table from SQL*Plus, SQL Developer and TOAD.
There also seems to be no issue at all with the 10.1 database so there seems to be an issue between Discoverer and the 10.2 database.
What do you think?
P.S. to cancel the policy use this script when logged in as SYS:
EXEC DBMS_RLS.drop_policy(
OBJECT_SCHEMA => 'DRAKE',
OBJECT_NAME => 'TST_DATE',
POLICY_NAME => 'SecByTST');
This same information is available on my blog in a more readable format here:
http://learndiscoverer.blogspot.com/2006/12/vpd-date-issue-between-101-and-102.html

Hi Rod
Well don't you just love Oracle. Obviously, whatever tests were done for certifying Discoverer against the 10.2 database did not include checking VPD policies. This merits a blog entry from me.
Your workaround for V_PREDICATE VARCHAR2(2000) := 'BIRTH_DATE=TO_DATE(''01-JAN-0001'')'; works. However, I had to write a new function to do this because my real function was trapping about a dozen items at the same time, some dates, some numbers and some varchars - exactly the way that the Oracle example code shows it in the 10.2 database manual.
So what I did was to create a new function that only handles dates and added a dedicated policy that works with only that function. Unfortuately, because I have many dates to manage, I was unabe to hard code the BIRTH_DATE so here is what I did:
V_PREDICATE VARCHAR2(2000) := 'SYSDATE = TO_DATE(''01-JAN-0001'')';
This works perfectly and Discoverer stopped complaining. It just has two policies on the same table for different data items. Isn't VPD cool? I'm hooked.
I really appreciate your time and effort on this. Now, let's see what Oracle support make of the issue because I raised a service request last night. No reply yet I'm afraid.
Best wishes
Michael

0IC_C03 Inventory Control Data Issue

Dear Gurus,
We have implemented BI 7.0 with the latest support package as of 1st May 2011. Issues are coming relavent to 0IC_C03 infocube for inventory control. I have followed the how to guideline but issues are there.
I have done the following settings:
1:To fill up the extractor for 2LIS_3_BX i have used the Transaction MCNB (All Stock Including non-valuated).
2: To fill up the extractor for 2LIS_3_BF i have used the Transaction OLI1BW (Posting Date till 2999).
3: To fill up the extractor for 2LIS_3_UM i have used the Transaction OLIZBW (Posting Date till 2999).
4: To generate the IP for 2LIS_3_BX for the opening stock balances the update mode CREATE OPENING BALANCE is not showing so i have used the update mode Generate Initial Status.
5: After running the IP for 2LIS_3_BX i run the DTP with extraction Mode "Initialize non commulative".
6: In the infocube Manage for 0IC_C03 i go in the collapse tab and enter the 2LIS_3_BX Request ID and uncheck the "NON Marker Update" to compress the request.
7: I generate the IP & DTP for both 2LIS_3_BF & Then 2LIS_3_UM and compress both the requests in the cube by the checking the "NON MArker Update"
8: When i run the query the data is not coming out right. Some records have negative values and some have wrong values.
Kindly tell me what to do.
Also, ive seen people using 2LIS_3_BF & UM only but not BX. How will this solution be implemented?
Regards,
Shahzad Khero

Dear Guru,
As off now here are the issues:
Quantity Total Stock is matching the stock in ECC 6.0 in transaction MB5B. The issue lies with the Issue Quantity Total Stock
& Receipt Quantity Total Stock. The values are not showing accurately but the new balance per posting date are showing accurately.
For e.g. Cube: 0IC_C03
Calendar Day     Issue Quantity Total Stock           Receipt Quantity Total Stock                          Quantity Total Stock
03/31/2010                           0.000 MT                                 63.000 MT                                                63.000 MT
04/1/2010                           78.940 MT                                 91.410 MT                                                75.470 MT
04/2/2010                           18.000 MT                                 0.000 MT                                                57.470 MT
MB51
Posting Date      Issue Quantity Total Stock           Receipt Quantity Total Stock                          Quantity Total Stock
03/31/2010                           0.000 MT                                 63.000 MT                                                63.000 MT
04/1/2010                           68.940 MT                                 81.410 MT                                                75.470 MT
04/2/2010                           18.000 MT                                 0.000 MT                                                57.470 MT
As you can see the issue & reciept docs are different but the impact on quantity total stock is fine. On top of that the material documents showing in PSA are slightly more than actual showing in MB5B & MB51. Some material documents are showing as a debit entry as well as credit entry in PSA but in reality they have a debit entry or a credit one. Kindly give me a feedback.
Regards,
shahzad

Data Issues in ODS

Hi Guru's
I want your ideas to slove the issue that came to me.....
I am loading Flat file data to ODS(3.5)...
for example :
Keyfields: Material,customer,sourcesystem.
Data fields: Product, price, productcomments, price comments.
In file 1 :
Material Customer Sourcesystem, Poduct, productcomment
1001 , xyz , pp , Book , good
In file 2:
Material Customer Sourcesystem, Price, pricecomment
1001 , xyz , pp , 12.00, More
when i loaded File 1 to ODS i can see the data as
1001,xyz,pp,Book,Good,
When i loaded File 2 to ODS i am seeing as
1001,xyz,pp,Book,12.00,- ,More.
My Issue is i want to see like
1001,xyz,pp,Book,Good,12.00,good, More.
In ODS i changed KeyFiq as Addition...But Productcomment and pricecomments are Char's
Can anyone give me idea how to do it
Regards
Rao VS

hi,
make the data fields as overwrite and load.
if you need data for keyfigure as addition, choose a cube that get the data from this ods and load delta data to that cube from this ods.
so load file1,file2 to ods then a delta load to cube(do delta after the init load).
Ramesh

Data Issue

Hi All ..
           We are facing one data issue DSO. One record is worngly loaded with some project iD ( Ex record is having ID GE1234 insted of having LE4423) remaining details are same . we are loading the data furtherly to master data table from the DSO. if i try for reporting for project id LE4423 ,information not avilable because it is heaving wrong ID,it is key also.But in the Source system (CFG) side Data is correct with ID LE4423.
         In update rule we are following one to one mapping for all infoobjects.My requirement is i need to have in my DSo LE4423 . I need to overwrite the record id GE1234 with LE4423 without affecting other fields in the record.
        Shall i load till PSA with the ID LE4423 ..then if load this single record to DSO will overwrite the GE1234 by choosing other field as key field. but we are following one to one mapping in update rule.
Please help me on this. i need to hev a correct id for record.
Thanks ,
Prem.

You can use selective deletion to delete the record with Project ID = GE1234
Load the data till PSA
Load the data to DSO using selection Project ID = LE4423 in DTP from PSA.
check in further data targets also for mismatch of data
Hope it helps,
Naveen Vytla
Edited by: Naveen Vytla on Nov 18, 2008 10:49 AM

Custom report -Mb51 -EBELN,AUFNR,KDAUF & KUNNR -Data issues

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

Master data Issue --- materials have unassigned or # values ...!!

Hello Experts,
I am facing an issue that the Customer Data is missing in a BEx Report.
Data Flow is 2LIS_13_VDITM --> DSO1 --> Merging DSO --> Cube --> Multiprovider --> Bex Report.
Exact issue is Customers in the Bex Report has unassigned to Sales Office, Sales Group, Sales District.
The only reason a customer should show up under u201Cunassignedu201D or u201C#u201D is if itu2019s improperly set up in the system.
customers are assigned with two values. one which has data and the other which has unassigned value.
I wanted to know, how do i check if the matierials are valid to have unassigned Values ?
Checked the Merging DSO and saw that there are actually values assigned values for the affected matierials.
After that checked the Cube data values are displayed except the Master Data values.
I guess..its completely related to Master data. I would like to know how can i resolve this issue.
Please reply me if you face this kind of master data issue in your expeiriance.
Thanks,
SN.

Hi,
Are Sales Office, Sales Group, Sales District are attributes of Customer?
In case they are, then the customers will be unassigned to Sales Office, Sales Group, Sales District in case the data for these attributes is loaded to the customer attributes.
and also check if the customer characteristic is properly assigned in the multiprovider.
Check if it helps.
Regards,
Joe

OBIEE 11g .0d date issue

Hi,
I create an initialization block to populate a couple of repository variables.
After saving the RDP the value for the default initializer changes from 2011 to 2011.0d
I have been using several workaround. But I need some permanent fix in rpd itself. Can anyone point to some Oracle Document? Is this issue been resolved in latest release of OBIEE. I am using 11.1.1.6.6.
Workaround Ref : The .0d date issue
Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type

Have you gone through my suggestions at the below links?
The .0d date issue
Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type
You have to do it where ever you are using that rep. variable not in the init block.

Verizon mades changes in the coding and now Windows Phone 7 is having data issues!!!

Starting about 3 weeks ago, I stopped receiving text messages and even worse stopped receiving calls yet alone my voicemails. I have changed not one thing to my phone, everything is exactly the way it was before the issues arised. Now I have to trick my phone to receive my data by dialing into my voicemail... And then what do you know, 30 text mesages, 12 voicemails!!!
The voicemails wont even tell you the date or time stamp (the time the voicemail was received). After numerous *228 and talking with level 2 over the holidays, I see a huge article on multiple news sites stating Verizon is having data issues... Dropped calls, loss of data, no signal while all our phone keep showing full bars and 3g. Verizon stated its only happening on there 4gLTE system and not 3G but thats a load of crap.
All one has to do is a google search of loss of text messages or voicemails on Verizon and you will see 100's up to 1000's of users like you and me all experiencing the same issues. And not just with Windows Phone 7, but with there baby Driod and iPhone as well.
What really ****** me off is that Verizon loves to play the blame game or pass the buck game. Hard Reset your phone and that will solve the problem... Yeah Right. If this was our OS and we updated a driver that changed the OS in the background I can see that being the solution. But for the 100's or 1000's of users that go to work daily, check there emails and text daily, and haven't changed one thing on the phone... THIS IS UNACCEPTABLE!!!
Now I read an articile for someone extermely close to Microsoft stating that Verizon turned down Nokia's new 4GLTE phone because they have no faith in the operating system and I have to think that maybe behind the scenes Verizon is trying to force us off Windows Phone 7 platform with data issue behind the scene and try to get us all into the Droid Platform which they make 50% of the cash off the phone just like the iPhone...
This is a joke, and I am really starting to think about going to ATT and getting the HTC Titan or the new Nokia 900. I have already research a 3 party app that will allow you to backup and restore your phone. And just read that Microsoft just put out an ad for backup, restore and cloud backup programmers for this latest feature.
Verizon the games need to stop, Verizon you need to stand behind this Platform, Verizon you need to provide better service for all us 3G users!!!
TheJester77

Starting about 3 weeks ago, I stopped receiving text messages and even worse stopped receiving calls yet alone my voicemails. I have changed not one thing to my phone, everything is exactly the way it was before the issues arised. Now I have to trick my phone to receive my data by dialing into my voicemail... And then what do you know, 30 text mesages, 12 voicemails!!!
The voicemails wont even tell you the date or time stamp (the time the voicemail was received). After numerous *228 and talking with level 2 over the holidays, I see a huge article on multiple news sites stating Verizon is having data issues... Dropped calls, loss of data, no signal while all our phone keep showing full bars and 3g. Verizon stated its only happening on there 4gLTE system and not 3G but thats a load of crap.
All one has to do is a google search of loss of text messages or voicemails on Verizon and you will see 100's up to 1000's of users like you and me all experiencing the same issues. And not just with Windows Phone 7, but with there baby Driod and iPhone as well.
What really ****** me off is that Verizon loves to play the blame game or pass the buck game. Hard Reset your phone and that will solve the problem... Yeah Right. If this was our OS and we updated a driver that changed the OS in the background I can see that being the solution. But for the 100's or 1000's of users that go to work daily, check there emails and text daily, and haven't changed one thing on the phone... THIS IS UNACCEPTABLE!!!
Now I read an articile for someone extermely close to Microsoft stating that Verizon turned down Nokia's new 4GLTE phone because they have no faith in the operating system and I have to think that maybe behind the scenes Verizon is trying to force us off Windows Phone 7 platform with data issue behind the scene and try to get us all into the Droid Platform which they make 50% of the cash off the phone just like the iPhone...
This is a joke, and I am really starting to think about going to ATT and getting the HTC Titan or the new Nokia 900. I have already research a 3 party app that will allow you to backup and restore your phone. And just read that Microsoft just put out an ad for backup, restore and cloud backup programmers for this latest feature.
Verizon the games need to stop, Verizon you need to stand behind this Platform, Verizon you need to provide better service for all us 3G users!!!
TheJester77

Data issue in IDOC

Hi Experts,
I do the following steps to generate IDOC for Passing over payroll data to ADP.
I run the payroll and Run the coombined Payroll export and go to WE05 to chk for idoc.
I have some data issue here. I need the IDOC to Pick 0167 infotype information. For few employees if does generate but for few it does not generate the info in IDOC. Please help me as to how to navigate this problem as iam very new to payroll and as weel as IDOc's.
Thanks
Chowdary

Hello,
Please try your luck with this.
Go to BD87 see the error message why this idoc is not moved. some time retrying will you success.
else also you find the problem in the error message.
thanks

More Guide Data Issues

Similar Messages

Maybe you are looking for