More info if possible on Flicker and de interlace filters??? Please

With freeze frames and slow motion using de-interlace and flicker filters there are several settings, trying to get a handle on the choice and what determines what setting to use for these filters??
Help
Kepp in mind, not a computer person so just simple as possible. Thanks in advance

My answer is on the other post.
It is important to experiment to find what suits you.
There are several settings of different strengths - you choose the one that just gets rid of the flicker.
Normally I just use the Flicker Filter set to Maximum. It may be overkill but it ensures that you are unlikely to have any flicker remaining.
You can only see the effects properly if you view your video on a TV set - ideally you should have a TV set hooked up to your computer via your camera/deck.
Ian.

Similar Messages

  • Want more info about optimizing battery lifespan and performance

    I have read Apple Support's basic article on iPhone battery charging, but it doesnt answer all of my questions.  i am kind of a fanatic about maintaining the health and longevity of my battery.  I usually run it down to 3% or less before plugging in, then charge it all the way up.  This creates some inconvenience, but after one year, my iPhone 5 battery is still performing much better than any previous iPhone ever did.  Here are a few questions I have:
    1. Is it really neccessary to wait for the battery to drop to 3%, or could I charge it after it goes below 20%, if it is more convenient?
    2. Is there any harm in charging to less than 100% if I am in a hurry?
    3. If I regularly plugged it in at over 50%, would it develop a memory and hold less charge?
    4. What effect, if any, do Mophie Juick Packs have on iPhone battery health (I just got one)?
    If there were no memory issues, the most convenient thing to do would be to plug it in every night at bedtime.  Any knowledgable commentary would be welcome.

    There's a few aspects to this - and such several "correct" answers.
    First, what exactly will you be doing? Are you just editing or will there be vfx/color grading etc? If it is the latter, and you're in SD, I'd personally go with uncompressed 10-bit. The files will be large, but it will be worth it if you do a lot of processing.
    ProRes files will be much smaller, and still look very good, but may not hold up as well to heavy processing.
    Not sure what you mean with #2... what other codec(s) are you looking at. Saying it is "unnecessary for SD" is an interesting comment - depends on what you want to do with the footage.
    Some info about ProRes (and uncompressed) bitrates:
    http://www.appleinsider.com/articles/07/04/18/acloser_look_at_apples_new_prores_422_videoformat.html
    http://www.apple.com/finalcutstudio/finalcutpro/apple-prores.html
    http://sportsvideo.org/main/blog/2009/08/11/apple-final-cut-prores-lowers-bitrat e/
    http://documentation.apple.com/en/finalcutpro/professionalformatsandworkflows/in dex.html#chapter=10%26section=1%26tasks=true

  • Is there a way of showing more info than just the title and author for books in my iPad "library", say date downloaded, or date last read, eg ?

    Sometimes I forget the title of a book I am currently reading, and have to check through each book in my long list of titles in my "library" to find it again. I cant see any way of adding any additional information to each title (and author), like date downloaded, or date last read, which would help me find a particular book again quickly. 
    I may be missing something simple, so can anyone please help?
    Thanks in advance.

    Sometimes I forget the title of a book I am currently reading, and have to check through each book in my long list of titles in my "library" to find it again. I cant see any way of adding any additional information to each title (and author), like date downloaded, or date last read, which would help me find a particular book again quickly. 
    I may be missing something simple, so can anyone please help?
    Thanks in advance.

  • Finder more info dialog bug

    More info in finder inspector window bug, it's not showing anything. but sometimes it's shows correct info.

    XSemperIdem5 wrote:
    When you select a document (whatever it may be) and click on "More Info" you can scroll down and see the section "Sharing & Permissions" How many (by default) should appear on the list that is shown below? There is the administrator and "Everyone". Is that it?
    No, there are many, but it depends on the file you are looking at.
    If you right-click, for example, Extensions.mkext in the System Library you will see listed
    system
    wheel
    everyone.
    These are special users and groups that are important for the proper running of BSD.
    There are also
    daemon
    admin
    staff
    sys
    procmod
    and numerous others.
    The GUI is like the wave on an ocean - most of the real stuff is hidden below the surface, but is very worth exploring. Over 90% of Leopard lies "under the hood."
    Message was edited by: L.Rowan

  • To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

    to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do they launch OK while in Safe Mode?

  • I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

    I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

    Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
    Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
    Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
    Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
    When you're done, turn TM back ON and close its preference pane.

  • Need more info on EO,VO and AM *.java files

    HI,
    Friends and experts I need your help in learning OAF.
    I am new to OAF and want to know more info about the following java classes.
    When I created a simple search page with EO, VO and AM, the following java classes are created.
    I want to know
    what is it?
    what we do with that ?
    where we use that?
    Any sample scripts if possible?
    EOImpl.java
    Please correct me if I am wrong,I know that we use this one for manipulating data for a particular row ,operations such as getattribut,setattribute, delete ,update, insert. There are various methods got created when you create the EO if you select options on the " Generate Method " during step 4 on EO wizard.
    EOCollImpl.java
    VOImpl.java
    ViewRowImpl
    AMImpl.java
    Thanks
    Sri.

    Hi Sri ,
    EO :
    Entity Objects are basically based on one table which encapsulate the business rules. These objects are used by OAF page to perform update/insert/delete operations .
    Inside EOImpl.java you will find setter() and getter () methods in java we call it as accessor and mutator , each attribute in EO is mapped to column in the data base table .
    You can also generate a create () method Validate () method .
    Eg : To get the sequence value in OAF you can use Create() method .
    VO :
    VOImpl (VO) : It just consist of an Data base sql query , you might have noticed while executing a query eg : VO.executeQuery() ;
    to perform any validation it provides iteration over and access to the view rows in its result set.
    VoRowImpl : Represents a single row in a view object .
    You will understand better when you writing a code using voimpl /voRowimpl objects
    AmImpl :
    It basically performs the Business logic , we will define all our methods to implement business logic .
    Eg : you can call a method from controller and define the method Amimpl.java , you can use of initializing the query or
    you do DML operation , etc ...
    In summery : The main reason why we have java file distribute across EO , VO , AM is because OAF is designed with MVC design pattern ,
    in other words we have to isolate the responsibility of code in each layer ( Model , View , Controller ) .Its bad practice to write
    the entire code in one single class file .
    Eg : Controller class should accept the parameter from user and pass these parameters BC4J files ( AMImpl.java ) and its Job of the AMImpl.java
    to perform the business logic and return the result back to to controller .
    To enforce the coding standard of MVC design pattern we have these java files EO , VO , AM , CO . with more practice you will understand the various
    methods defined in each of these java files .
    Keerthi

  • Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstorepls help

    Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...

    You can set up an Apple ID without a credit card.
    Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534

  • "more info" in Get Info showing "--" instead of actual infos for newer videos and images

    I've just noticed that when I click on "Get Info" on my newer pictures and videos, the "more info" section is now showing "--" instead of the dimensions of the images and videos. However when I go to my older files, the info is showing. Also if I search any of the newer files (those with the missing info) in Spotlight, it doesn't show up.  I've done some research and some people suggest reindexing Spotlight, but that never worked for me. In fact, even if I exclude a folder in my Privacy list, it's still showing as a result when I search them. I'm sure this is a problem with Spotlight as it stores the dimensions info, but since reindexing it is not a solution, can it be solved in some other way?

    It takes time on newer things, but might have to be opened first or something.
    If you want, you can clear the caches with OnyX (#12) and that would rebuild and repair the entire sub-system.
    ..Step by Step to fix your Mac
    Mac maintainence steps

  • Every time I right-click an image in Firefox 3.6.12 to view image size info it says "Unknown (not cached)". Any ideas on why this could be happening and how I can stop it? My OS is Ubuntu 10.10. If you need any more info let me know.

    Every time I right-click an image in Firefox 3.6.12 to view image size info it says "Unknown (not cached)". Any ideas on why this could be happening and how I can stop it? My OS is Ubuntu 10.10. If you need any more info let me know.

    Is the disk cache and the memory cache enabled?
    You can check these prefs on the about:config page.
    * http://kb.mozillazine.org/browser.cache.disk.enable
    * http://kb.mozillazine.org/browser.cache.memory.enable
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    Your More system details list shows two outdated Flash plugins that you should remove and update to Flash 10.1 r102 or at least remove 10.0 r45 and wait until your distribution offers a 10.1 r102 update.
    # Shockwave Flash 10.0 r45
    # Shockwave Flash 10.1 r85
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • A "shared' equipment icon identified as only f891cb000000 is appearing in my sidebar and the only info I can generate identifies it as a PC-- my attempts to generate more info results in nothing more than "fetching;" has anyone experienced similar?

    A "shared' equipment icon identified as only f891cb000000 is appearing in my sidebar and the only info I can generate identifies it as a PC-- my attempts to generate more info results in nothing more than "fetching;" has anyone experienced similar?

    Thanks to the gentlemen, Messrs. Galt & rack0 tack0, for their timely replies. I failed to mention in my original post that there are upwards of 15 Apple appliances in our house-- from Apple TV to 4 Apple iPhones to 4 iPads to 2 MacBook Pros to 2 iMacs to a 2TB Time Capsule-- we're all Apple, all the time. We don't own a PC and that was what was hanging me up. I did confirm, incidentally that we're IP6 (although, honestly, that technical jargon didn't mean a lot to me-- hey, I learned something [sorta]!). Anyway, after much digging, I've finally determined that what was/is being identified as a PC, is in fact a Canon MX860 Printer serving the "old" 21' iMac-- thankfully, our recently acquired Epson XP-410 serving the "new" 27' iMac is identified as such. And despite the time spent, a few valuable things occurred along the way, including a firmware update related to the Time Capsule... learn by doing, I guess. Thanks again.

  • Screen 'greys' when click MORE INFO and nothing appears

    Hey there,
    I'm having immense difficulty uninstalling an application. It has locked items and so it won't trash. I have tracked these items down and have begun unlocking them by using the list view and drilling down until I get to MORE INFO. At this point the item used to pop up showing Locked and I could just remove the x against locked and so eventually, after doing this countless times, unlock all the offending items and trash the stupid app. But suddenly, after doing this successfully for ages no little screen pops up when I hit GET INFO. Instead it all goes a delicate shade of grey and I can't do anything. I have two questions. 1. What do I do now? and 2. Is there a way to unlock all these things at once by doing it one level higher?
    They are, incidentally, all spreadsheet outlines in an accounting program I use (MYOB Account Edge) and although I have spent lots of time with the MYOB support desk I am a Mac user in a PC world and they are well-meaning but essentially uninformed about their program on this platform, even though they sell the Mac product as well as the PC version.
    I have, incidentally, checked for an uninstall program for this but can't find one, and the support desk also said just put it in the trash.
    Help greatly appreciated. I thought I'd found a way, albeit laborious, with the individual unlockings, and now even that isn't working.

    Is there a way to unlock all these things at once by doing it one level higher?
    Open the Terminal application in your /Applications/Utilities/ folder and enter the following:
    chflags -R nouchg
    followed by a space. Drag the folder into the Terminal window and press Enter. This command will usually unlock all locked items that you're the owner of anywhere inside the folder you dragged into the Terminal window.
    (13954)

  • I tried to open my Illustrator CS6 today and got the following error message, "To open Adobe Illustrator CS6 you need to install the legacy Java SE runtime". The window then states, "Click More info...to visit the legacy Java SE 6 download website."  I do

    Help. I tried to open my Illustrator CS6 today and got the following error message, "To open Adobe Illustrator CS6 you need to install the legacy Java SE runtime". The window then states, "Click More info...to visit the legacy Java SE 6 download website."  I do click on the More Info... button, but the webpage is blank. Please help.
    Thanks,
    Leo

    Leo,
    Depending on your OS, you should be able to use;
    Win:
    http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
    Mac:
    http://support.apple.com/kb/DL1572
    Some have found that the page may turn up blank to start with, so it may be necessary to reload the page.
    Others have found that it may depend on browser. Specifically, a switch from Safari has solved it in one case.

  • Finder has suddenly restricted displaying "Preview" and "More info" info.

    Sup Mac Users,
    Well, a small problem has embezzled itself upon my Macintosh recently. When shuffling through my finder window and eventually ending up, say on a picture, the dimensions of the picture are not listed anymore in the preview info. As well, when previewing a movie in the finder, a Quicktime movie, the duration of the movie is no longer displayed?
    This info has just disappeared somehow. And when clicking on "more info..." under the previewed file in the finder (or when right-clicking the file anywhere on my computer), which brings up a separate window displaying much descriptive info., the pic dimensions are missing, and with movies, the duration is missing too. It was listed under "size" when getting info for both pics and movies.
    _What happened to this info???_ This info has been +incredibly useful+ info for just a quick glance at a file... but for some reason, when a pic or a movie is on my desktop, this exact info, duration or dimensions, is shown under the pic or movie on my desktop, and nothing else (but "show item info" is activated for the desktop).
    help please,
    Message was edited by: patzivota

    Hi patzivota, could just be a simple corruption in your "com.apple.finder.plist" file. You can drag this to the desktop and restart (you'll find it in Users/YourUserName/Library/Preferences) to see if this will solve your problem.
    If after restart all appears well just trash the old plist file.

  • Error File missing when try to run iTunes on windows. No more info. Uninstalled following support instructions and reinstalled - same message while reinstalling.

    Error "File missing" when try to run iTunes on windows. No more info. Uninstalled following support instructions and reinstalled - same message while reinstalling.

    Hi there slklug43,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    -Griff W. 

Maybe you are looking for