More info on my problem

When I try to install Quick Time, I get these messages: Internal Error 2318 C:Program Files/Quick Time/QT Plugin.ocx
Error -1603 Fatal error during installation. Consult windows installer help (msi.chm) or MSDN for more info.
I'm clueless.

Take a look at this web page:
InstallShield Error 1603: Fatal Error During Installation
Perhaps that will help.
BTW, it's best if you post one main topic, and then add any additional material as a reply to that original post. If you post multiple new topics, it makes it difficult for anyone to have all your information in one place.
Regards.

Similar Messages

I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?

I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?
and in system report >> hardware >> Graphics/Display >> it shows both grafics card listed.

Some Mac's when the RAM is increased the Intel HD 3000 integrated graphics will bump itself up to the higher video RAM it takes, this seems to be what occured.
It also means the dedicated graphics card will be used less, but only so slightly less.
You obviously still should have both, you can test this by turning off Graphics Switching in Energy Saver, that will use the decicated AMD card all the time.
You can also run Cinebench and compare the scores here
Mac video card performance

Just did the iTunes update that iTunes said was available now iTunes won't open, keep getting Runtime Error message. R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.

Just did the iTunes update that iTunes said was available, now iTunes won't open. I just keep getting a Runtime Error message.
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
Is anyone else having this problem?
I tried to re-install and got the following message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
Does this mean I have now lost everything?

I just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck!

"more info" in Get Info showing "--" instead of actual infos for newer videos and images

I've just noticed that when I click on "Get Info" on my newer pictures and videos, the "more info" section is now showing "--" instead of the dimensions of the images and videos. However when I go to my older files, the info is showing. Also if I search any of the newer files (those with the missing info) in Spotlight, it doesn't show up. I've done some research and some people suggest reindexing Spotlight, but that never worked for me. In fact, even if I exclude a folder in my Privacy list, it's still showing as a result when I search them. I'm sure this is a problem with Spotlight as it stores the dimensions info, but since reindexing it is not a solution, can it be solved in some other way?

It takes time on newer things, but might have to be opened first or something.
If you want, you can clear the caches with OnyX (#12) and that would rebuild and repair the entire sub-system.
..Step by Step to fix your Mac
Mac maintainence steps

'More Info' disappears from 'Get Info' Inspector Tab when accessed more than once

I've just got back from an appointment at my local Apple store Genius Bar and have had three members of staff all looking bewildered and unsure as to what to suggest with regard to this issue (apart from a fresh OS install/HD reformat). Basically, it seems that after initially using the Inspector to gather metadata about files - mp3, m4a, MOV, avi etc the 'More Info' section becomes blank, as if there is no metadata to display, even though metadata is definitely present (see attached pictures and linked video):
Demonstration of issue (best to open in new tab, then click play or double click to start video)
First use of Inspector to view metadata on an mp3 file, Flexible (Original Mix) at 17:05
Second use of Inspector to view metadata on an mp3 file, Flexible (Original Mix) at 17:06
As you can see, in the second instance, all mention of metadata is gone. Am somewhat perplexed as to why this is happening. Any thoughts or suggestions appreciated.
Jonathan

Ok, so this issue has resolved all by itself. Perhaps an update has rectified whatever the problem was, who knows. Anyway, job done tick lol
FYI the link to the demo video won't work anymore either as I've removed corresponding video from my dropbox account

Error in identifying control file, check alert log for more info

hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30

ayadsufyan wrote:
hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30I'd say the error message is pretty self-evident:
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified fileWhat do you suppose "can not find the specified file" means?
And what does this have to do with database security?

Get info pane doesn't show appropriate "more info" info

Hello. There's a problem on my "get info" pane, where normally there should be a "more info" column showing some information about "image size", "author", etc.
But recently, for example, an image file's "more info" column doesn't show its dimension and other info, only showing "title" and "last opened". And other things are simply gone.
Another example is MP3 files, normally there should be showing more metadata like "bitrate", "artist", "duration", etc. But now, it just shows the "title" and "last opened".
This really bugs me because I normally used to look at some info about these things sometimes when I need to check it out when doing some picture works. So basically the main problem is "more info" doesn't show information that I needed and which it should be there, but somehow there's a problem on Mac OS X that makes it failed to show them all out.
If anyone could tell me a way to fix it, I am very appreciated!! Thank you!!
Here's the get info pane of both MP3 and JPEG files:
http://cl.ly/txW
http://cl.ly/oXv
Message was edited by: dronex

Generally when the "More Info" section is nearly empty it is because the file in question has not been indexed by Spotlight. As to WHY it hasn't, that is a whole 'nother question, which you may be able to answer. Perhaps you have it stored somewhere that is excluded in the Spotlight Privacy pane, or on a drive where Spotlight is disabled, or in a folder where you don't have proper permissions... and so on.
Francine
Francine
Schwieder

"X items could not be synced. See Itunes for more info" but Itunes AOK

I am having problems syncing my iPhone to itunes. Itunes runs through the syncing process and at the end my phone says "X Items could not be synced. See Itunes for more info". When I look at Itunes I can't find any evidence that something went wrong. Is there an error log or something I can look up to find out what is going wrong?
thanks!

Found another thread with a few possible solutions. The one that worked for me was to delete the ipod photo cache in the "Pictures" folder. Here's the thread: https://discussions.apple.com/thread/3390697

Need more info about "NestedContainer" violation

Hello,
I have a "NestedContainer" violation for a Canvas container in my application. Compared to the application's root container it is located at level 6 i.e. nested in 5 other parent containers. However at the same time I have other containers (again Canvases) which are even deeper nested for example at level 8 compared to the root container.
I need more information when exactly the "NestedContainer" violation is triggered so I fix my code if needed and submit a bug for FlexPMD in case the rule is not implemented as designed.
Thanks!
Smirnoff

Hi
I would like to share an example but I need to create it since I don't want to post the actual source code.
Simply copying the problem mxml file under another name doesn't work because it is put outside its container and then the violation is not generated.
If I have to create an example it might be too time consuming to achieve these:
- keep the same component hierarchy
- keep the problem present
- keep the example clean from the real source code
That's why I wanted to get more info when this violation is triggered and hopefully create an example faster.
Smirnoff

How do I find out my keychain password? Need more info fast about this

My computer started to get really slow, so I looked what I could do to make it faster again. After searching I found that the safari content was high and that I should delete it to make it less laggy and slow. Long story short I ended up deleting my saved passwords on safari...Looking into more info, I found out that I needed to get to Keychain Access. I got to Keychain access, found all the passwords.
My question..
•How do I get them out of Keychain?
•If I end up needing my password for Keychain, how do I find that out? I have the like start up CD, but I dont remember ever making a password.
•And if I do retreive my Keychain Password some how, will that delete everything stored in Keychain? I would have just tried it, but its a lot of passwords I CAN NOT lose...
Please help :/
Thanks!

Never mind the screenshot.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

"Get Info" only displaying "more info" 1 time

Strange problem here.
When I select a file in the finder, and hit cmd-i to "get info" it displays as expected. The "More Info:" section is complete. If it's an image, it gives dimensions and color space etc. If its a pdf, I get page count, title, creator etc. Everything works just fine.
If I then close the info window, then later (or immediately) return, "More Info:" displays only two hyphens: -- . This happens on every file. First viewing of get info works fine. Close it, open again, and I only get -- in the More Info section.
Any suggestions on what might be causing this?

Projectionist wrote:
but I did import my preferences from the iMac when I first got it, so something must have copied over in that process.
Yes, precisely.
I tried to edit before you saw the .pist because I misread that it also didn't work in the test account. The issue is systemwide and requires a systemwide approach. I wish I could pinpoint it more. I realize how nagging these issues can be as I frequently use the Get Info command and frequently close and re-open it.
EDIT: Can you shutdown, disconnect the Drobo and try?

Finder has suddenly restricted displaying "Preview" and "More info" info.

Sup Mac Users,
Well, a small problem has embezzled itself upon my Macintosh recently. When shuffling through my finder window and eventually ending up, say on a picture, the dimensions of the picture are not listed anymore in the preview info. As well, when previewing a movie in the finder, a Quicktime movie, the duration of the movie is no longer displayed?
This info has just disappeared somehow. And when clicking on "more info..." under the previewed file in the finder (or when right-clicking the file anywhere on my computer), which brings up a separate window displaying much descriptive info., the pic dimensions are missing, and with movies, the duration is missing too. It was listed under "size" when getting info for both pics and movies.
_What happened to this info???_ This info has been +incredibly useful+ info for just a quick glance at a file... but for some reason, when a pic or a movie is on my desktop, this exact info, duration or dimensions, is shown under the pic or movie on my desktop, and nothing else (but "show item info" is activated for the desktop).
help please,
Message was edited by: patzivota

Hi patzivota, could just be a simple corruption in your "com.apple.finder.plist" file. You can drag this to the desktop and restart (you'll find it in Users/YourUserName/Library/Preferences) to see if this will solve your problem.
If after restart all appears well just trash the old plist file.

TS3074 While trying to download Itunes on my lenovo laptop it tells me in an error box the following : " this installation package could not be opened verify that it exsist or contact the vendor for more info" what did i do?

While trying to download Itunes on my lenovo laptop it tells me in an error box the following : " this installation package could not be opened verify that it exsist or contact the vendor for more info" what did i do?

Perhaps the answer provided for this problem in Microsoft's forums will help.
Good luck.

Get More Info for NetConnection.Connect.Failed Error?

I have a single server that runs IIS and FMS, both on port 80. The server has two internal IPs assigned to it, one for IIS and the other for FMS. I also have two static public IPs. My router maps one public IP to IIS' internal IP and likewise for FMS.
IIS works fine. Using an online port scanner, I was able to determine that port 80 is responsive for both public IPs. Before I had configured my Adapter.xml and fms.ini, only IIS' public IP was responsive. This seems to indicate that FMS is fine.
However, when my ActionScript creates a NetConnection and calls connect(), my netStatus callback takes about half a minute to be invoked, and I get "NetConnection.Connect.Failed". Which is not very informative. Is there a way to get more info about the cause of the error? Also does anyone have suggestions for how to debug this issue?

Hi,
Thanks for trying out FMS..
I can guide you with few checkpoints to first see where the problem might be.
1. Go to the FMS installation directory and check for the logs folder. See all the logs (according to date) and find if the port bindings are all successful. This might tell us whether FMS actually has started or not.
2. FMS works on port 1935 for RTMP streaming. It also gets bundled with apache (listening on 8134) but one of the fms processes also takes hold of 80 for its tunneling streaming as well as redirecting to apache. So either you remove this entry from fms.ini or change it to reflect to some other port. ADAPTER.HOSTPORT is the variable to look for.
3. How are you making sure that FMS is working/not working ?
4. Please turn off your firewall or other secutiry for testing purposes to see if you are able to hit the FMS .
Let us know if any of the above are helpful in getting some more information.
Thank you !

6358629 SSLSocket.close() / read() deadlock - need more info

Java 1.5.0_14 is documented as having this fix ....
"6358629 jsse runtime SSLSocket.close() and SSLSocket.read() deadlock "
I cannot find this bug in the bug db and the sun page says sometimes bugs don't show up for security reasons.
The complete absense of info on this bug other than its title means I cannot tell whether this is the same bug I am seeing randomly in production.
Given that I cannot replicate the problem in a reproducable test case I need sufficient info to justify upgrading the prod VM and risk introducing new bugs in an otherwise stable platform.
Is there any way to get more info on this bug ?
Anyone seen a problem like this in their system?
Is it possible Sun has just hidden the bug for no good reason?
Any help appreciated.

Hello, thank you very much for your information.
I had met same bug on Linux.
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b16, mixed mode)
My workaround is here. Closing file descriptor directry by calling private native method( closeSocket0 of java.net.PlainSocketImpl ) using reflection.
It works well on my environment.
public static void closeNativeSocket( Socket socket )
try
Object object = socket;
String fieldName = "impl";
Field field = null;
Method method = null;
Class clazz;
clazz = Class.forName( "java.net.Socket" );
field = clazz.getDeclaredField( fieldName );
field.setAccessible( true );
object = field.get( object );
clazz = Class.forName( "java.net.PlainSocketImpl" );
method = clazz.getDeclaredMethod( "socketClose0", new Class[] { Boolean.TYPE } );
method.setAccessible( true );
method.invoke( object, new Object[]{ new Boolean( false ) } );
catch( Exception e )
e.printStackTrace();
hope this helps.

More info on my problem

Similar Messages

Maybe you are looking for